How to repair interior door locks #17
Loading…
Reference in New Issue
No description provided.
Delete Branch "%!s(<nil>)"
Deleting a branch is permanent. Although the deleted branch may continue to exist for a short time before it actually gets removed, it CANNOT be undone in most cases. Continue?
Interior doors are often opened and closed during the day, and therefore the locks on them experience a lot of stress, and over time, the handles on the doors begin to hang and jam, the latch loosens or the tongue sinks. The door is difficult to close or does not fit snugly against the frame.
Before disassembling the lock, you need to make sure that it is malfunctioning, since the wood of the door frame swollen from moisture, the door leaf, the weakening of the door hinges, and even shrinkage of the house can be the cause of all problems - the door frame is deformed and the lock starts to work poorly. Therefore, it is very important to promptly call the masters from https://grlocksmith.ca/ in order to do quality work on the door lock. This is very important for the job to be done on time and the lock to work well.
There are 2 types of locks in interior doors: overhead and mortise, and they are divided into several more types:
The lock with a latch tongue is designed to temporarily fix the door leaf in the closed position. The tongue is retracted by pressing the handle, which has a built-in latch lock that locks the door.
Lock with a latch - designed to lock the door from the inside, and either a keyhole or a plug is located outside the door leaf. It is used in doors for toilets and bathrooms.
A lock with a cylinder or lever lock is considered a complex mechanism and is not used so often. Used to restrict access to living rooms.
Rim lock repair
To repair the body of this type of lock, you need to unscrew the fixing bolts with a screwdriver and remove the lock from the door leaf. Next, remove the cylinder from its body, and after checking its performance, replace if necessary. If the cylinder is in good condition, the cause of the failure should be sought in the lock body.
Mortise lock repair
With a mortise lock design, you must first remove the core, and only then it will be possible to remove the lock from the door leaf opening.
During the repair of the lock, in order to avoid loss of the spring, the disassembly of the mechanism must be carried out on a flat surface and lay a soft cloth. Using a screwdriver, remove the screws that fix the lock body, remove the debris that has settled between the parts with tweezers, and wipe the mechanisms consisting of shutter levers, flat and round springs with a cloth soaked in clean gasoline. After cleaning, you need to check the mechanism for deformation of parts or their breakage.
If the cause of the breakdown lies in a malfunction of the latch, you should disassemble the lock and replace the springs, and if the handle is loose and does not return the latch to its original position, you need to make sure that it is correctly fastened relative to the rotary mechanism. And also the cause of latch jamming can be displacement, deformation, mechanical damage and rubbing of parts. After inspecting the lock mechanism and eliminating all faults, install the lock in place and connect with screws. To maintain the long-term performance of the locking device, the lock must be serviced from time to time, the mechanism must be cleaned of accumulated dirt and dust and lubricated with special oil.
Discover the magic of multi-million jackpots at https://mrbet-casino.dk/, where fortunes are waiting to be claimed. Stay informed and entertained with mr bet's blog, featuring gaming tips, news, and exciting promotions.