diff --git a/installation/openbsd/httpd.conf b/installation/openbsd/httpd.conf
new file mode 100644
index 000000000..82f4803fd
--- /dev/null
+++ b/installation/openbsd/httpd.conf
@@ -0,0 +1,36 @@
+#
+# Default httpd.conf file for Pleroma on OpenBSD
+# Simple installation instructions
+# 1. Place file in /etc
+# 2. Replace <IPv4 address> with your public IP address
+# 3. If using IPv6, uncomment IPv6 lines and replace <IPv6 address> with your public IPv6 address
+# 4. Check file using 'doas httpd -n'
+# 5. Enable and start httpd:
+#      # doas rcctl enable httpd
+#      # doas rcctl start httpd
+#
+
+ext_inet="<IPv4 address>"
+#ext_inet6="<IPv6 address>"
+
+server "default" {
+    listen on $ext_inet port 80 # Comment to disable listening on IPv4
+#    listen on $ext_inet6 port 80 # Comment to disable listening on IPv6
+    listen on 127.0.0.1 port 80 # Do NOT comment this line
+
+    log syslog
+    directory no index
+
+    location "/.well-known/acme-challenge/*" {
+        root "/acme"
+        request strip 2
+    }
+
+    location "/robots.txt" { root "/htdocs/local/" }
+    location "/*" { block return 302 "https://$HTTP_HOST$REQUEST_URI" }
+}
+
+types {
+    include "/usr/share/misc/mime.types"
+}
+
diff --git a/installation/openbsd/rc.d/pleromad b/installation/openbsd/rc.d/pleromad
new file mode 100755
index 000000000..19ac4bb51
--- /dev/null
+++ b/installation/openbsd/rc.d/pleromad
@@ -0,0 +1,34 @@
+#!/bin/ksh
+#
+# Default init file for Pleroma on OpenBSD
+#
+# Simple installation instructions:
+# 1. Install Pleroma per wiki instructions
+# 2. Place this pleromad file in /etc/rc.d
+# 3. Enable and start Pleroma
+#	# doas rcctl enable pleromad
+#	# doas rcctl start pleromad
+#
+
+daemon="/usr/local/bin/elixir"
+daemon_flags="--detached -S /usr/local/bin/mix phx.server"
+daemon_user="_pleroma"
+
+. /etc/rc.d/rc.subr
+
+rc_reload=NO
+pexp="phx.server"
+
+rc_check() {
+	pgrep -q -U _pleroma -f "phx.server"
+}
+
+rc_start() {
+	${rcexec} "cd pleroma; ${daemon} ${daemon_flags}"
+}
+
+rc_stop() {
+	pkill -q -U _pleroma -f "phx.server"
+}
+
+rc_cmd $1
diff --git a/installation/openbsd/relayd.conf b/installation/openbsd/relayd.conf
new file mode 100644
index 000000000..31c2c1129
--- /dev/null
+++ b/installation/openbsd/relayd.conf
@@ -0,0 +1,44 @@
+#
+# Default relayd.conf file for Pleroma on OpenBSD
+# Simple installation instructions:
+# 1. Place in /etc
+# 2. Replace <ipaddr> with your public IPv4 address
+# 3. If using IPv6i, uncomment IPv6 lines and replace <ip6addr> with your public IPv6 address
+# 4. Check file using 'doas relayd -n'
+# 5. Reload/start relayd
+#      # doas rcctl enable relayd
+#      # doas rcctl start relayd
+#
+
+ext_inet="<ipaddr>"
+#ext_inet6="<ip6addr>"
+
+table <pleroma_server> { 127.0.0.1 }
+table <httpd_server> { 127.0.0.1 }
+
+http protocol plerup { # Protocol for upstream pleroma server
+    #tcp { nodelay, sack, socket buffer 65536, backlog 128 } # Uncomment and adjust as you see fit
+    tls ciphers "ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA0-POLY1305"
+    tls ecdhe secp384r1
+
+    # Forward some paths to the local server (as pleroma won't respond to them as you might want)
+    pass request quick path "/robots.txt" forward to <httpd_server>
+
+    # Append a bunch of headers
+    match request header append "X-Forwarded-For" value "$REMOTE_ADDR" # This two header and the next one are not strictl required by pleroma but adding them won't hurt
+    match request header append "X-Forwarded-By" value "$SERVER_ADDR:$SERVER_PORT"
+
+    match request header append "Connection" value "upgrade"
+
+}
+
+relay wwwtls {
+    listen on $ext_inet port https tls # Comment to disable listening on IPv4
+#    listen on $ext_inet6 port https tls # Comment to disable listening on IPv6
+
+    protocol plerup
+
+    forward to <pleroma_server> port 4000 check http "/" code 200
+    forward to <httpd_server> port 80 check http "/robots.txt" code 200
+}
+
diff --git a/installation/rc.d/pleromad b/installation/rc.d/pleromad
deleted file mode 100755
index b19ce1e74..000000000
--- a/installation/rc.d/pleromad
+++ /dev/null
@@ -1,26 +0,0 @@
-#!/bin/ksh
-#
-
-daemon="/usr/local/bin/elixir"
-daemon_flags="--detached -S /usr/local/bin/mix phx.server"
-daemon_user="_pleroma"
-
-. /etc/rc.d/rc.subr
-
-rc_reload=NO
-#pexp="/usr/local/lib/erlang19/erts-8.3/bin/beam -- -root /usr/local/lib/erlang19 -progname erl19 -- -home /home/_pleroma -- -pa /usr/local/lib/elixir/bin/../lib/eex/ebin /usr/local/lib/elixir/bin/../lib/elixir/ebin /usr/local/lib/elixir/bin/../lib/ex_unit/ebin /usr/local/lib/elixir/bin/../lib/iex/ebin /usr/local/lib/elixir/bin/../lib/logger/ebin /usr/local/lib/elixir/bin/../lib/mix/ebin -elixir ansi_enabled true -noshell -s elixir start_cli -noshell -noinput -extra --detached -S /usr/local/bin/mix phx.server"
-pexp="phx.server"
-
-rc_check() {
-	pgrep -q -U _pleroma -f "phx.server"
-}
-
-rc_start() {
-	${rcexec} "cd pleroma; ${daemon} ${daemon_flags}"
-}
-
-rc_stop() {
-	pkill -q -U _pleroma -f "phx.server"
-}
-
-rc_cmd $1