`is_user_option_local()` was added during MU development and used for a handful of changesets before the code using it was removed again. It has not been used by MU or core since nor is it widely used elsewhere.
Fixes#41697.
Props bnap00, jeremyfelt.
git-svn-id: https://develop.svn.wordpress.org/trunk@41668 602fd350-edb4-49c9-b593-d223f7449a82
* Introduce a new `wp.customize.previewer.trash()` JS API to trash the current changeset, along with logic to `WP_Customize_Manager` to handle deleting changeset drafts.
* Add `trashing` to `wp.customize.state` which is then used to update the UI.
* UI for trashing is pending design feedback. One possibility is to add a new trash button to Publish Settings section that invokes `wp.customize.previewer.trash()`.
* Improve logic for managing the visibility and disabled states for publish buttons.
* Prevent attempting `requestChangesetUpdate` while processing and bump processing while doing `save`.
* Update `changeset_date` state only if sent in save response.
* Merge `ThemesSection#loadThemePreview()` into `ThemesPanel#loadThemePreview()`.
* Remove unused `autosaved` state.
* Start autosaving and prompting at beforeunload after a change first happens. This is key for theme previews since even if a user did not make any changes, there were still dirty settings which would get stored in an auto-draft unexpectedly.
* Allow `Notification` to accept additional `classes` to be added to `container`.
* Introduce `OverlayNotification` and use for theme installing, previewing, and trashing. Such overlay notifications take over the entire window.
Props westonruter, celloexpressions.
See #37661, #39896, #21666, #35210.
git-svn-id: https://develop.svn.wordpress.org/trunk@41667 602fd350-edb4-49c9-b593-d223f7449a82
Previously, the query to update the count of published posts would run every time any post type transitioned between a `publish`/non-published status or was deleted.
Props sboisvert, JPry, spacedmonkey.
Fixes#42021.
git-svn-id: https://develop.svn.wordpress.org/trunk@41665 602fd350-edb4-49c9-b593-d223f7449a82
PHP < 5.4 requires a `$matches` parameter to be passed to `preg_match_all()`
`wpdb::prepare()` can be called before translations are loaded, so needs appropriate `wp_load_translations_early()` calls.
See #42040.
git-svn-id: https://develop.svn.wordpress.org/trunk@41663 602fd350-edb4-49c9-b593-d223f7449a82
`wpdb::prepare()` currently gives no information if the number of arguments passed doesn't match the number of placeholders in the query. This change gives an explicit notice that the call was incorrect.
Also fixes an enrelated term meta test that was triggering this new notice.
Props thekt12 for the initial patch.
Fixes#42040.
git-svn-id: https://develop.svn.wordpress.org/trunk@41662 602fd350-edb4-49c9-b593-d223f7449a82
`get_current_blog_id()` is more appropriate for determining the ID of the current site in most cases. This eliminates the need for the global `$wpdb` in several functions and is better than the implicit global used in admin pages.
Props bnap00, spacedmonkey.
Fixes#41684.
git-svn-id: https://develop.svn.wordpress.org/trunk@41661 602fd350-edb4-49c9-b593-d223f7449a82
Previously, the `ms-files` test group would not run in any automatic configuration. This ensures it is always run as part of the test suite in Travis CI.
Props netweb.
Fixes#41698.
git-svn-id: https://develop.svn.wordpress.org/trunk@41659 602fd350-edb4-49c9-b593-d223f7449a82
- sets the modal content to `role="document"` to make screen readers switch back to browse mode
- standardizes the Themes screen and Customizer modals interaction
- Themes screen modal: sets initial focus on the modal overlay instead of the primary button, avoiding to "skip" content for keyboard and screen reader users
Fixes#42055.
git-svn-id: https://develop.svn.wordpress.org/trunk@41658 602fd350-edb4-49c9-b593-d223f7449a82
Update the way and location the JavaScript client determines which models/endpoints require the `force=true` parameter when being deleted to avoid a `rest_trash_not_supported` error. Identify models with endpoints that support DELETE, excluding those that support the trash (posts and pages by default). Also, move the check into the default `wp.api.WPApiBaseModel.initialize()` function.
Props caercam, euthelup.
Fixes#40672.
git-svn-id: https://develop.svn.wordpress.org/trunk@41657 602fd350-edb4-49c9-b593-d223f7449a82
Prior to this change, when passing another site than the current one to `wp_get_users_with_no_role()` through its `$site_id` parameter, the function still used the roles available on the current site, which would cause users with other roles that possibly exist on the other site to show up as users without a role. Switching the site before retrieving the available rules fixes the issue.
Fixes#42015.
git-svn-id: https://develop.svn.wordpress.org/trunk@41654 602fd350-edb4-49c9-b593-d223f7449a82
The `time` strategy in `count_users()` queries users by role. However, the roles queried for were not affected by passing another site than the current one through the `$site_id` parameter, causing users having roles that were not queried for to appear as users without a role. This changeset fixes the issue by switching the site before retrieving the roles to query for.
Fixes#42014.
git-svn-id: https://develop.svn.wordpress.org/trunk@41653 602fd350-edb4-49c9-b593-d223f7449a82
* Deactivate the Themes panel immediately after changing selected status to non-publish.
* Animate publish settings button into view with publish button when collapsing Themes panel.
* Deactivate publish settings section and hide publish settings button entirely when customizer state is clean.
* Harden access of Themes panel in case it was removed by plugin.
* Fix throttling of `renderScreenshots` calls in `ThemesSection`.
Amends [41648], [41626].
See #37661, #39896, #34843.
git-svn-id: https://develop.svn.wordpress.org/trunk@41649 602fd350-edb4-49c9-b593-d223f7449a82
Unify the theme-browsing and theme-customization experiences by introducing a comprehensive theme browser and installer directly accessible in the customizer. Replaces the customizer theme switcher with a full-screen panel for discovering/browsing and installing themes available on WordPress.org. Themes can now be installed and previewed directly in the customizer without entering the wp-admin context. Also includes an extensible framework for browsing and installing themes from other sources.
Also includes CSS auto-prefixing added via `grunt precommit:css`.
For details, see: https://make.wordpress.org/core/2016/10/03/feature-proposal-a-new-experience-for-discovering-installing-and-previewing-themes-in-the-customizer/
Previously [38813] but reverted in [39140].
Fixes#37661, #34843, #38666.
Props celloexpressions, folletto, westonruter, karmatosed, melchoyce, afercia.
git-svn-id: https://develop.svn.wordpress.org/trunk@41648 602fd350-edb4-49c9-b593-d223f7449a82
This brings parity with `pre_delete_post` filter in `wp_delete_post()`, introduced in [34082].
Props bor0.
Fixes#42030.
git-svn-id: https://develop.svn.wordpress.org/trunk@41638 602fd350-edb4-49c9-b593-d223f7449a82
These two tests assume a certain level of indentation in code which does not conform to core's coding
standards and will hopefully be corrected at some point in #41057.
See #41057
git-svn-id: https://develop.svn.wordpress.org/trunk@41635 602fd350-edb4-49c9-b593-d223f7449a82
The inline documentation for `wpdb::prepare()` was kind of confusing, and didn't describe some of the behaviour correctly.
Fixes#41983.
git-svn-id: https://develop.svn.wordpress.org/trunk@41632 602fd350-edb4-49c9-b593-d223f7449a82
If DB errors are shown during installation, the table prefix test will also show an error, even though we're deliberately trying to generate that error.
Fixes#40655.
git-svn-id: https://develop.svn.wordpress.org/trunk@41631 602fd350-edb4-49c9-b593-d223f7449a82
When switching between post editor modes, the current cursor position and selection is now preserved. This allows authors to switch modes without losing the context of where they were in the document.
Props biskobe.
Fixes#41962.
git-svn-id: https://develop.svn.wordpress.org/trunk@41630 602fd350-edb4-49c9-b593-d223f7449a82
IPv4 addresses are scarce, overworked, and underpaid. They're ready to retire, but we just won't let them go. If you care about their wellbeing, switch to IPv6 today.
Props schlessera, birgire.
Fixes#41722.
git-svn-id: https://develop.svn.wordpress.org/trunk@41629 602fd350-edb4-49c9-b593-d223f7449a82
To bring Core into line with the changes to `$wpdb->prepare()` in WordPress 4.8.2, query placeholders shouldn't be quoted.
Props jrf, johnjamesjacoby.
Fixes#41983.
git-svn-id: https://develop.svn.wordpress.org/trunk@41628 602fd350-edb4-49c9-b593-d223f7449a82
`pre_cache_alloptions` is run before the alloptions array is inserted into the cache, and is valuable for sanity checking the options, particularly if your caching scheme has size limitations.
`alloptions` is run before returning the alloptions array, and is useful for when you have extra information that alloptions should return.
Props sebastian.pisula, keesiemeijer.
Fixes#33958.
git-svn-id: https://develop.svn.wordpress.org/trunk@41627 602fd350-edb4-49c9-b593-d223f7449a82
* Incorporates code from the Customize Snapshots and Customize Posts feature plugins.
* Adds a new Publish Settings section for managing the changeset status, scheduled date, and frontend preview link.
* Updates Publish button to reflect the status selected in the Publish Settings (including Save Draft and Schedule).
* Deactivates the Themes section when a non-publish status selected, and deactivates the Publish Settings section when previewing a theme switch.
* Introduces an `outer` section type (`wp.customize.OuterSection` in JS) for the Publish Settings section to use and for available widgets and available nav menu panels to use in the future. These sections can be expanded while other sections are expanded.
* Introduces `WP_Customize_Date_Time_Control` in PHP and `wp.customize.DateTimeControl` in JS for managing a date/time value.
* Keeps track of scheduled time and proactively publish from the client when the time arrives, as opposed to waiting for WP Cron.
* Auto-publishes a scheduled changeset when attempting to access one that missed its schedule.
* Starts a new changeset if attempting to save a changeset that was previously publish.
* Adds `force` arg to `requestChangesetUpdate()` to force an update request even when there are no pending changes.
* Adds utils methods for `getCurrentTimestamp` and `getRemainingTime`.
* Adds new state values for `selectedChangesetStatus`, `changesetDate`, `selectedChangesetDate`.
* Fixes logic for when to short-circuit check to close Customizer when there are unsaved changes.
* Adds getter methods for `autosaved` and `branching` parameters, with the latter applying the `customize_changeset_branching` filter.
* Call to `establish_loaded_changeset` on the fly when `changeset_uuid()` is called if no changeset UUID was specififed.
* De-duplicates logic for dismissing auto-draft changesets.
* Includes unit tests.
Builds on [41597].
Props sayedwp, westonruter, melchoyce, JoshuaWold, folletto, stubgo, karmatosed, dlh, paaljoachim, afercia, johnregan3, utkarshpatel, valendesigns.
See #30937.
Fixes#39896, #28721, #39275.
git-svn-id: https://develop.svn.wordpress.org/trunk@41626 602fd350-edb4-49c9-b593-d223f7449a82
Switching the available roles and the current user's capabilities no longer happens in `switch_to_blog()` and `restore_current_blog()`, instead it has been moved to a new function `wp_switch_roles_and_user()` which is hooked into the site switching process. This allows to improve performance by temporarily unhooking the function when roles and capabilities do not need to be switched.
This change ensures that switching available roles now works closer to switching user capabilities, particularly the changes in [41624]. A new `WP_Roles::for_site( $site_id )` method has been introduced, and the `WP_Roles::_init()` method has been deprecated. It is furthermore possible to retrieve the site ID for which the available roles are currently initialized through a new `WP_Roles::get_site_id()`.
Props johnjamesjacoby, flixos90.
Fixes#38645.
git-svn-id: https://develop.svn.wordpress.org/trunk@41625 602fd350-edb4-49c9-b593-d223f7449a82
While it has always been possible to initialize a user's roles and capabilities for another site than the current one in a multisite, the actual roles available were not switched prior to this change, possibly causing invalid roles to show up or actually valid capabilities not being available.
In order to fix this bug in a clean way, relevant parts of the `WP_User` class have been refactored. The ID of the site for which capabilities are currently initialized are now stored in a private property `WP_User::$site_id`. The `WP_User::for_blog( $blog_id )` and `WP_User::_init_caps( $cap_key )` methods have been deprecated in favor of `WP_User::for_site( $site_id )`. In addition, a new method `WP_User::get_site_id()` has been introduced to retrieve the site ID for which the user's capabilities are currently initialized.
Props ryanduff, jeremyfelt, flixos90.
Fixes#36961.
git-svn-id: https://develop.svn.wordpress.org/trunk@41624 602fd350-edb4-49c9-b593-d223f7449a82
Given the new WordPress browsers support policy, the `screen-reader-text` css
class used in the admin can be updated to use modern CSS and correct syntax. See
https://github.com/wpaccessibility/a11ythemepatterns/blob/master/read-more-links/style.css
Worth noting the `clip` property is deprecated and kept for IE11 and Edge.
- uses `clip-path` for modern browsers
- keeps `clip` for old browsers and update its value to a correct syntax
- resets `clip-path` to `none` where the class is used to dynamically reveal elements
- removes an old rule that made `screen-reader-text` completely invisible in the help tabs `#screen-meta`
- standardizes the rule across CSS files
Fixes#40970.
git-svn-id: https://develop.svn.wordpress.org/trunk@41622 602fd350-edb4-49c9-b593-d223f7449a82
- uses button elements for the toggles
- uses `aria-expanded` on the toggles to communicate to assistive technologies the panels expanded/collapsed state
- adds the "circular focus" style to the toggles to give users a clear indication of the currently focused element
- standardizes CSS class names to `.toggle-indicator` and `.handlediv` as these names are already used across the admin for similar controls
Props monikarao, xavortm, mihai2u, Kopepasah.
Fixes#37013.
git-svn-id: https://develop.svn.wordpress.org/trunk@41621 602fd350-edb4-49c9-b593-d223f7449a82
This is used after updating a taxonomy term in the link to return to the term listing screen.
Props benoitchantre
Fixes#41898
git-svn-id: https://develop.svn.wordpress.org/trunk@41618 602fd350-edb4-49c9-b593-d223f7449a82
Jeremy Felt
Weston Ruter
Gary Pendergast
Andrea Fercia
Adam Silverstein
Andrew Ozz
Felix Arntz
John Blackbourn
Sergey Biryukov
Dominik Schilling (ocean90)
Pascal Birchler