update man pages

oops, forgot to update man pages for header -> vipsheader rename

.gitignore

@@ -58,6 +58,8 @@ swig/vipsCC/vimagemodule.cxx
 swig/vipsCC/vmaskmodule.cxx
 tools/edvips
 tools/header
+tools/vipsedit
+tools/vipsheader
 tools/vips
 tools/vipsthumbnail
 tools/find_mosaic

ChangeLog

@@ -1,3 +1,6 @@
+24/6/14 started 7.40.1
+- revise man.1 pages
+
 23/6/14 started 7.40.0
 - version bump
 - renamed "header" as "vipsheader" and "edvips" as "vipsedit"

configure.ac

@@ -2,7 +2,7 @@
 
 # also update the version number in the m4 macros below
 
-AC_INIT([vips], [7.40.0], [vipsip@jiscmail.ac.uk])
+AC_INIT([vips], [7.40.1], [vipsip@jiscmail.ac.uk])
 # required for gobject-introspection
 AC_PREREQ(2.62)
 
@@ -18,7 +18,7 @@ AC_CONFIG_MACRO_DIR([m4])
 # user-visible library versioning
 m4_define([vips_major_version], [7])
 m4_define([vips_minor_version], [40])
-m4_define([vips_micro_version], [0])
+m4_define([vips_micro_version], [1])
 m4_define([vips_version],
           [vips_major_version.vips_minor_version.vips_micro_version])
 

man/Makefile.am

@@ -2,8 +2,8 @@ man_MANS = \
 	batch_crop.1 \
 	batch_image_convert.1 \
 	batch_rubber_sheet.1 \
-	edvips.1 \
+	vipsedit.1 \
-	header.1 \
+	vipsheader.1 \
 	light_correct.1 \
 	vips.1 \
 	vipsprofile.1 \

man/batch_crop.1

@@ -18,5 +18,5 @@ pixels, taken from the corresponding input images.
 .SH RETURN VALUE
 returns 0 on success and non-zero on error.
 .SH SEE ALSO
-header(1), im_vips2tiff(3), im_vips2jpeg(3), im_vips2png(3), im_vips2ppm(3)
+vipsheader(1), im_vips2tiff(3), im_vips2jpeg(3), im_vips2png(3), im_vips2ppm(3)
 

man/batch_image_convert.1

@@ -25,5 +25,5 @@ will write jim.jpeg with a 95% quality factor.
 .SH RETURN VALUE
 returns 0 on success and non-zero on error.
 .SH SEE ALSO
-header(1), im_vips2tiff(3), im_vips2jpeg(3), im_vips2png(3), im_vips2ppm(3)
+vipsheader(1), im_vips2tiff(3), im_vips2jpeg(3), im_vips2png(3), im_vips2ppm(3)
 

man/light_correct.1

@@ -34,6 +34,6 @@ problems with im_global_balance(3).
 .SH RETURN VALUE
 returns 0 on success and non-zero on error.
 .SH SEE ALSO
-header(1), vips(1)
+vipsheader(1), vips(1)
 .SH COPYRIGHT
 The National Gallery and Birkbeck College, 1989-1996.

man/vips.1

@@ -71,6 +71,6 @@ Get a "usage" message for an operation
 .SH RETURN VALUE
 returns 0 on success and non-zero on error.
 .SH SEE ALSO
-header(1)
+vipsheader(1)
 .SH COPYRIGHT
 The National Gallery and Birkbeck College, 1989-1996.

man/vipsedit.1

@@ -1,10 +1,10 @@
-.TH EDVIPS 1 "30 June 1993"
+.TH VIPSEDIT 1 "30 June 1993"
 .SH NAME
-edvips \- edit header of a vips image file
+vipsedit \- edit header of a vips image file
 .SH SYNOPSIS
-.B edvips [OPTION...] vipsfile
+.B vipsedit [OPTION...] vipsfile
 .SH DESCRIPTION
-.B edvips 
+.B vipsedit 
 alters a VIPS image file's header. This is useful for setting the resolution, 
 for example.
 
@@ -23,28 +23,28 @@ The options are:
   -v, --yoffset=N     set Yoffset to N
   -e, --setext        replace extension block with stdin
 
-Be very careful when changing Xsize, Ysize, BandFmt or Bands. edvips does no
+Be very careful when changing Xsize, Ysize, BandFmt or Bands. vipsedit does no
 checking!
 
 .SH EXAMPLES
 To set the Xsize to 512 and Bands to 6:
 
-  edvips --xsize=512 --bands=6 fred.v
+  vipsedit --xsize=512 --bands=6 fred.v
 
 or
 
-  edvips -x 512 -b 6 fred.v
+  vipsedit -x 512 -b 6 fred.v
 
 Extract the XML metadata from an image with
-.B header(1),
+.B vipsheader(1),
 edit it, and reattach with 
-.B edvips(1).
+.B vipsedit(1).
 
-  header -f getext fred.v | sed s/banana/pineapple/ | edvips -e fred.v
+  vipsheader -f getext fred.v | sed s/banana/pineapple/ | vipsedit -e fred.v
 
 .SH RETURN VALUE
 returns 0 on success and non-zero on error.
 .SH SEE ALSO
-header(1)
+vipsheader(1)
 .SH COPYRIGHT
 K. Martinez 1993

man/vipsheader.1

@@ -1,10 +1,10 @@
-.TH HEADER 1 "12 July 1990"
+.TH VIPSHEADER 1 "12 July 1990"
 .SH NAME
-header \- prints information about an image file
+vipsheader \- prints information about an image file
 .SH SYNOPSIS
-header [OPTIONS ...] files ...
+vipsheader [OPTIONS ...] files ...
 .SH DESCRIPTION
-.B header(1)
+.B vipsheader(1)
 prints image header fields to stdout.
 
 .SH OPTIONS
@@ -15,16 +15,16 @@ Print value of
 from image header. The special field name getext prints
 the VIPS extension block: the XML defining the image metadata. You can alter
 this, then reattach with 
-.B edvips(1).
+.B vipsedit(1).
 
 .TP
 .B -a, --all
 Show all fields. Normally 
-.B header
+.B vipsheader
 just shows a one-line summary.
 
 .SH EXAMPLES
- $ header -f Xsize ~/pics/*.v   
+ $ vipsheader -f Xsize ~/pics/*.v   
  1024
  1279
  22865
@@ -32,7 +32,7 @@ just shows a one-line summary.
  256
 
 .SH SEE ALSO
-edvips(1)
+vipsedit(1)
 .SH COPYRIGHT
 N. Dessipris
 .SH AUTHOR

man/vipsthumbnail.1

@@ -116,4 +116,4 @@ makes it print a list of the operations it performs on each image.
 .SH RETURN VALUE
 returns 0 on success and non-zero on error.
 .SH SEE ALSO
-header(1)
+vipsheader(1)

tools/vipsedit

@@ -1,228 +0,0 @@
-#! /bin/bash
-
-# vipsedit - temporary wrapper script for .libs/vipsedit
-# Generated by libtool (GNU libtool) 2.4.2 Debian-2.4.2-1.7ubuntu1
-#
-# The vipsedit program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-relink_command="(cd /home/john/GIT/libvips/tools; { test -z \"\${LIBRARY_PATH+set}\" || unset LIBRARY_PATH || { LIBRARY_PATH=; export LIBRARY_PATH; }; }; { test -z \"\${COMPILER_PATH+set}\" || unset COMPILER_PATH || { COMPILER_PATH=; export COMPILER_PATH; }; }; { test -z \"\${GCC_EXEC_PREFIX+set}\" || unset GCC_EXEC_PREFIX || { GCC_EXEC_PREFIX=; export GCC_EXEC_PREFIX; }; }; { test -z \"\${LD_RUN_PATH+set}\" || unset LD_RUN_PATH || { LD_RUN_PATH=; export LD_RUN_PATH; }; }; LD_LIBRARY_PATH=/home/john/packages/gems/lib:/home/john/vips/lib:/usr/local/lib:; export LD_LIBRARY_PATH; PATH=/home/john/packages/gems/bin:/home/john/vips/bin:/usr/local/bin:/home/john/.gem/ruby/1.9/bin:/home/john/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games; export PATH; gcc -std=gnu99 -g -Wall -o \$progdir/\$file vipsedit.o -DG_DISABLE_ASSERT -DG_DISABLE_CHECKS -pthread -fopenmp -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/x86_64-linux-gnu -I/usr/include/pango-1.0 -I/usr/include/orc-0.4 -I/usr/include/openslide -I/usr/include/libxml2 -I/usr/include/libpng12 -I/usr/include/libgsf-1 -I/usr/include/libexif -I/usr/include/harfbuzz -I/usr/include/glib-2.0 -I/usr/include/freetype2 -I/usr/include/OpenEXR -I/usr/include/ImageMagick -Wl,--export-dynamic -pthread -pthread  ../libvips/.libs/libvips.so /usr/lib/x86_64-linux-gnu/libMagickWand.so /usr/lib/x86_64-linux-gnu/libMagickCore.so -lpng12 /usr/lib/x86_64-linux-gnu/libtiff.so -ljpeg -lgmodule-2.0 -lpangoft2-1.0 -lpango-1.0 -lfontconfig /usr/lib/x86_64-linux-gnu/libfreetype.so -lgsf-1 -lgobject-2.0 -lxml2 -lglib-2.0 -lfftw3 -lorc-0.4 -llcms2 /usr/lib/x86_64-linux-gnu/libIlmImf.so -lImath -lHalf -lIex -lIlmThread -lopenslide -lcfitsio -lpthread -lwebp -lmatio -lhdf5 -lz -lexif -lm -lstdc++ -fopenmp -pthread -Wl,-rpath -Wl,/home/john/GIT/libvips/libvips/.libs -Wl,-rpath -Wl,/home/john/vips/lib)"
-
-# This environment variable determines our operation mode.
-if test "$libtool_install_magic" = "%%%MAGIC variable%%%"; then
-  # install mode needs the following variables:
-  generated_by_libtool_version='2.4.2'
-  notinst_deplibs=' ../libvips/libvips.la'
-else
-  # When we are sourced in execute mode, $file and $ECHO are already set.
-  if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then
-    file="$0"
-
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
-  eval 'cat <<_LTECHO_EOF
-$1
-_LTECHO_EOF'
-}
-    ECHO="printf %s\\n"
-  fi
-
-# Very basic option parsing. These options are (a) specific to
-# the libtool wrapper, (b) are identical between the wrapper
-# /script/ and the wrapper /executable/ which is used only on
-# windows platforms, and (c) all begin with the string --lt-
-# (application programs are unlikely to have options which match
-# this pattern).
-#
-# There are only two supported options: --lt-debug and
-# --lt-dump-script. There is, deliberately, no --lt-help.
-#
-# The first argument to this parsing function should be the
-# script's ../libtool value, followed by no.
-lt_option_debug=
-func_parse_lt_options ()
-{
-  lt_script_arg0=$0
-  shift
-  for lt_opt
-  do
-    case "$lt_opt" in
-    --lt-debug) lt_option_debug=1 ;;
-    --lt-dump-script)
-        lt_dump_D=`$ECHO "X$lt_script_arg0" | /bin/sed -e 's/^X//' -e 's%/[^/]*$%%'`
-        test "X$lt_dump_D" = "X$lt_script_arg0" && lt_dump_D=.
-        lt_dump_F=`$ECHO "X$lt_script_arg0" | /bin/sed -e 's/^X//' -e 's%^.*/%%'`
-        cat "$lt_dump_D/$lt_dump_F"
-        exit 0
-      ;;
-    --lt-*)
-        $ECHO "Unrecognized --lt- option: '$lt_opt'" 1>&2
-        exit 1
-      ;;
-    esac
-  done
-
-  # Print the debug banner immediately:
-  if test -n "$lt_option_debug"; then
-    echo "vipsedit:vipsedit:${LINENO}: libtool wrapper (GNU libtool) 2.4.2 Debian-2.4.2-1.7ubuntu1" 1>&2
-  fi
-}
-
-# Used when --lt-debug. Prints its arguments to stdout
-# (redirection is the responsibility of the caller)
-func_lt_dump_args ()
-{
-  lt_dump_args_N=1;
-  for lt_arg
-  do
-    $ECHO "vipsedit:vipsedit:${LINENO}: newargv[$lt_dump_args_N]: $lt_arg"
-    lt_dump_args_N=`expr $lt_dump_args_N + 1`
-  done
-}
-
-# Core function for launching the target application
-func_exec_program_core ()
-{
-
-      if test -n "$lt_option_debug"; then
-        $ECHO "vipsedit:vipsedit:${LINENO}: newargv[0]: $progdir/$program" 1>&2
-        func_lt_dump_args ${1+"$@"} 1>&2
-      fi
-      exec "$progdir/$program" ${1+"$@"}
-
-      $ECHO "$0: cannot exec $program $*" 1>&2
-      exit 1
-}
-
-# A function to encapsulate launching the target application
-# Strips options in the --lt-* namespace from $@ and
-# launches target application with the remaining arguments.
-func_exec_program ()
-{
-  case " $* " in
-  *\ --lt-*)
-    for lt_wr_arg
-    do
-      case $lt_wr_arg in
-      --lt-*) ;;
-      *) set x "$@" "$lt_wr_arg"; shift;;
-      esac
-      shift
-    done ;;
-  esac
-  func_exec_program_core ${1+"$@"}
-}
-
-  # Parse options
-  func_parse_lt_options "$0" ${1+"$@"}
-
-  # Find the directory that this script lives in.
-  thisdir=`$ECHO "$file" | /bin/sed 's%/[^/]*$%%'`
-  test "x$thisdir" = "x$file" && thisdir=.
-
-  # Follow symbolic links until we get to the real thisdir.
-  file=`ls -ld "$file" | /bin/sed -n 's/.*-> //p'`
-  while test -n "$file"; do
-    destdir=`$ECHO "$file" | /bin/sed 's%/[^/]*$%%'`
-
-    # If there was a directory component, then change thisdir.
-    if test "x$destdir" != "x$file"; then
-      case "$destdir" in
-      [\\/]* | [A-Za-z]:[\\/]*) thisdir="$destdir" ;;
-      *) thisdir="$thisdir/$destdir" ;;
-      esac
-    fi
-
-    file=`$ECHO "$file" | /bin/sed 's%^.*/%%'`
-    file=`ls -ld "$thisdir/$file" | /bin/sed -n 's/.*-> //p'`
-  done
-
-  # Usually 'no', except on cygwin/mingw when embedded into
-  # the cwrapper.
-  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=no
-  if test "$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR" = "yes"; then
-    # special case for '.'
-    if test "$thisdir" = "."; then
-      thisdir=`pwd`
-    fi
-    # remove .libs from thisdir
-    case "$thisdir" in
-    *[\\/].libs ) thisdir=`$ECHO "$thisdir" | /bin/sed 's%[\\/][^\\/]*$%%'` ;;
-    .libs )   thisdir=. ;;
-    esac
-  fi
-
-  # Try to get the absolute directory name.
-  absdir=`cd "$thisdir" && pwd`
-  test -n "$absdir" && thisdir="$absdir"
-
-  program=lt-'vipsedit'
-  progdir="$thisdir/.libs"
-
-  if test ! -f "$progdir/$program" ||
-     { file=`ls -1dt "$progdir/$program" "$progdir/../$program" 2>/dev/null | /bin/sed 1q`; \
-       test "X$file" != "X$progdir/$program"; }; then
-
-    file="$$-$program"
-
-    if test ! -d "$progdir"; then
-      mkdir "$progdir"
-    else
-      rm -f "$progdir/$file"
-    fi
-
-    # relink executable if necessary
-    if test -n "$relink_command"; then
-      if relink_command_output=`eval $relink_command 2>&1`; then :
-      else
-	printf %s\n "$relink_command_output" >&2
-	rm -f "$progdir/$file"
-	exit 1
-      fi
-    fi
-
-    mv -f "$progdir/$file" "$progdir/$program" 2>/dev/null ||
-    { rm -f "$progdir/$program";
-      mv -f "$progdir/$file" "$progdir/$program"; }
-    rm -f "$progdir/$file"
-  fi
-
-  if test -f "$progdir/$program"; then
-    if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then
-      # Run the actual program with our arguments.
-      func_exec_program ${1+"$@"}
-    fi
-  else
-    # The program doesn't exist.
-    $ECHO "$0: error: \`$progdir/$program' does not exist" 1>&2
-    $ECHO "This script is just a wrapper for $program." 1>&2
-    $ECHO "See the libtool documentation for more information." 1>&2
-    exit 1
-  fi
-fi

tools/vipsheader

@@ -1,228 +0,0 @@
-#! /bin/bash
-
-# vipsheader - temporary wrapper script for .libs/vipsheader
-# Generated by libtool (GNU libtool) 2.4.2 Debian-2.4.2-1.7ubuntu1
-#
-# The vipsheader program cannot be directly executed until all the libtool
-# libraries that it depends on are installed.
-#
-# This wrapper script should never be moved out of the build directory.
-# If it is, it will not operate correctly.
-
-# Sed substitution that helps us do robust quoting.  It backslashifies
-# metacharacters that are still active within double-quoted strings.
-sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
-
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
-  emulate sh
-  NULLCMD=:
-  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
-  # is contrary to our usage.  Disable this feature.
-  alias -g '${1+"$@"}'='"$@"'
-  setopt NO_GLOB_SUBST
-else
-  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
-fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-
-# The HP-UX ksh and POSIX shell print the target directory to stdout
-# if CDPATH is set.
-(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
-
-relink_command="(cd /home/john/GIT/libvips/tools; { test -z \"\${LIBRARY_PATH+set}\" || unset LIBRARY_PATH || { LIBRARY_PATH=; export LIBRARY_PATH; }; }; { test -z \"\${COMPILER_PATH+set}\" || unset COMPILER_PATH || { COMPILER_PATH=; export COMPILER_PATH; }; }; { test -z \"\${GCC_EXEC_PREFIX+set}\" || unset GCC_EXEC_PREFIX || { GCC_EXEC_PREFIX=; export GCC_EXEC_PREFIX; }; }; { test -z \"\${LD_RUN_PATH+set}\" || unset LD_RUN_PATH || { LD_RUN_PATH=; export LD_RUN_PATH; }; }; LD_LIBRARY_PATH=/home/john/packages/gems/lib:/home/john/vips/lib:/usr/local/lib:; export LD_LIBRARY_PATH; PATH=/home/john/packages/gems/bin:/home/john/vips/bin:/usr/local/bin:/home/john/.gem/ruby/1.9/bin:/home/john/.local/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games; export PATH; gcc -std=gnu99 -g -Wall -o \$progdir/\$file vipsheader.o -DG_DISABLE_ASSERT -DG_DISABLE_CHECKS -pthread -fopenmp -I/usr/lib/x86_64-linux-gnu/glib-2.0/include -I/usr/include/x86_64-linux-gnu -I/usr/include/pango-1.0 -I/usr/include/orc-0.4 -I/usr/include/openslide -I/usr/include/libxml2 -I/usr/include/libpng12 -I/usr/include/libgsf-1 -I/usr/include/libexif -I/usr/include/harfbuzz -I/usr/include/glib-2.0 -I/usr/include/freetype2 -I/usr/include/OpenEXR -I/usr/include/ImageMagick -Wl,--export-dynamic -pthread -pthread  ../libvips/.libs/libvips.so /usr/lib/x86_64-linux-gnu/libMagickWand.so /usr/lib/x86_64-linux-gnu/libMagickCore.so -lpng12 /usr/lib/x86_64-linux-gnu/libtiff.so -ljpeg -lgmodule-2.0 -lpangoft2-1.0 -lpango-1.0 -lfontconfig /usr/lib/x86_64-linux-gnu/libfreetype.so -lgsf-1 -lgobject-2.0 -lxml2 -lglib-2.0 -lfftw3 -lorc-0.4 -llcms2 /usr/lib/x86_64-linux-gnu/libIlmImf.so -lImath -lHalf -lIex -lIlmThread -lopenslide -lcfitsio -lpthread -lwebp -lmatio -lhdf5 -lz -lexif -lm -lstdc++ -fopenmp -pthread -Wl,-rpath -Wl,/home/john/GIT/libvips/libvips/.libs -Wl,-rpath -Wl,/home/john/vips/lib)"
-
-# This environment variable determines our operation mode.
-if test "$libtool_install_magic" = "%%%MAGIC variable%%%"; then
-  # install mode needs the following variables:
-  generated_by_libtool_version='2.4.2'
-  notinst_deplibs=' ../libvips/libvips.la'
-else
-  # When we are sourced in execute mode, $file and $ECHO are already set.
-  if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then
-    file="$0"
-
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
-  eval 'cat <<_LTECHO_EOF
-$1
-_LTECHO_EOF'
-}
-    ECHO="printf %s\\n"
-  fi
-
-# Very basic option parsing. These options are (a) specific to
-# the libtool wrapper, (b) are identical between the wrapper
-# /script/ and the wrapper /executable/ which is used only on
-# windows platforms, and (c) all begin with the string --lt-
-# (application programs are unlikely to have options which match
-# this pattern).
-#
-# There are only two supported options: --lt-debug and
-# --lt-dump-script. There is, deliberately, no --lt-help.
-#
-# The first argument to this parsing function should be the
-# script's ../libtool value, followed by no.
-lt_option_debug=
-func_parse_lt_options ()
-{
-  lt_script_arg0=$0
-  shift
-  for lt_opt
-  do
-    case "$lt_opt" in
-    --lt-debug) lt_option_debug=1 ;;
-    --lt-dump-script)
-        lt_dump_D=`$ECHO "X$lt_script_arg0" | /bin/sed -e 's/^X//' -e 's%/[^/]*$%%'`
-        test "X$lt_dump_D" = "X$lt_script_arg0" && lt_dump_D=.
-        lt_dump_F=`$ECHO "X$lt_script_arg0" | /bin/sed -e 's/^X//' -e 's%^.*/%%'`
-        cat "$lt_dump_D/$lt_dump_F"
-        exit 0
-      ;;
-    --lt-*)
-        $ECHO "Unrecognized --lt- option: '$lt_opt'" 1>&2
-        exit 1
-      ;;
-    esac
-  done
-
-  # Print the debug banner immediately:
-  if test -n "$lt_option_debug"; then
-    echo "vipsheader:vipsheader:${LINENO}: libtool wrapper (GNU libtool) 2.4.2 Debian-2.4.2-1.7ubuntu1" 1>&2
-  fi
-}
-
-# Used when --lt-debug. Prints its arguments to stdout
-# (redirection is the responsibility of the caller)
-func_lt_dump_args ()
-{
-  lt_dump_args_N=1;
-  for lt_arg
-  do
-    $ECHO "vipsheader:vipsheader:${LINENO}: newargv[$lt_dump_args_N]: $lt_arg"
-    lt_dump_args_N=`expr $lt_dump_args_N + 1`
-  done
-}
-
-# Core function for launching the target application
-func_exec_program_core ()
-{
-
-      if test -n "$lt_option_debug"; then
-        $ECHO "vipsheader:vipsheader:${LINENO}: newargv[0]: $progdir/$program" 1>&2
-        func_lt_dump_args ${1+"$@"} 1>&2
-      fi
-      exec "$progdir/$program" ${1+"$@"}
-
-      $ECHO "$0: cannot exec $program $*" 1>&2
-      exit 1
-}
-
-# A function to encapsulate launching the target application
-# Strips options in the --lt-* namespace from $@ and
-# launches target application with the remaining arguments.
-func_exec_program ()
-{
-  case " $* " in
-  *\ --lt-*)
-    for lt_wr_arg
-    do
-      case $lt_wr_arg in
-      --lt-*) ;;
-      *) set x "$@" "$lt_wr_arg"; shift;;
-      esac
-      shift
-    done ;;
-  esac
-  func_exec_program_core ${1+"$@"}
-}
-
-  # Parse options
-  func_parse_lt_options "$0" ${1+"$@"}
-
-  # Find the directory that this script lives in.
-  thisdir=`$ECHO "$file" | /bin/sed 's%/[^/]*$%%'`
-  test "x$thisdir" = "x$file" && thisdir=.
-
-  # Follow symbolic links until we get to the real thisdir.
-  file=`ls -ld "$file" | /bin/sed -n 's/.*-> //p'`
-  while test -n "$file"; do
-    destdir=`$ECHO "$file" | /bin/sed 's%/[^/]*$%%'`
-
-    # If there was a directory component, then change thisdir.
-    if test "x$destdir" != "x$file"; then
-      case "$destdir" in
-      [\\/]* | [A-Za-z]:[\\/]*) thisdir="$destdir" ;;
-      *) thisdir="$thisdir/$destdir" ;;
-      esac
-    fi
-
-    file=`$ECHO "$file" | /bin/sed 's%^.*/%%'`
-    file=`ls -ld "$thisdir/$file" | /bin/sed -n 's/.*-> //p'`
-  done
-
-  # Usually 'no', except on cygwin/mingw when embedded into
-  # the cwrapper.
-  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=no
-  if test "$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR" = "yes"; then
-    # special case for '.'
-    if test "$thisdir" = "."; then
-      thisdir=`pwd`
-    fi
-    # remove .libs from thisdir
-    case "$thisdir" in
-    *[\\/].libs ) thisdir=`$ECHO "$thisdir" | /bin/sed 's%[\\/][^\\/]*$%%'` ;;
-    .libs )   thisdir=. ;;
-    esac
-  fi
-
-  # Try to get the absolute directory name.
-  absdir=`cd "$thisdir" && pwd`
-  test -n "$absdir" && thisdir="$absdir"
-
-  program=lt-'vipsheader'
-  progdir="$thisdir/.libs"
-
-  if test ! -f "$progdir/$program" ||
-     { file=`ls -1dt "$progdir/$program" "$progdir/../$program" 2>/dev/null | /bin/sed 1q`; \
-       test "X$file" != "X$progdir/$program"; }; then
-
-    file="$$-$program"
-
-    if test ! -d "$progdir"; then
-      mkdir "$progdir"
-    else
-      rm -f "$progdir/$file"
-    fi
-
-    # relink executable if necessary
-    if test -n "$relink_command"; then
-      if relink_command_output=`eval $relink_command 2>&1`; then :
-      else
-	printf %s\n "$relink_command_output" >&2
-	rm -f "$progdir/$file"
-	exit 1
-      fi
-    fi
-
-    mv -f "$progdir/$file" "$progdir/$program" 2>/dev/null ||
-    { rm -f "$progdir/$program";
-      mv -f "$progdir/$file" "$progdir/$program"; }
-    rm -f "$progdir/$file"
-  fi
-
-  if test -f "$progdir/$program"; then
-    if test "$libtool_execute_magic" != "%%%MAGIC variable%%%"; then
-      # Run the actual program with our arguments.
-      func_exec_program ${1+"$@"}
-    fi
-  else
-    # The program doesn't exist.
-    $ECHO "$0: error: \`$progdir/$program' does not exist" 1>&2
-    $ECHO "This script is just a wrapper for $program." 1>&2
-    $ECHO "See the libtool documentation for more information." 1>&2
-    exit 1
-  fi
-fi