f8003bda67
Add tiffsave target ( #2798 )
...
* compiles, but untested
* works, but libtiff needs seek for write
next: add seek methods to target
* add target seek and read
seem to work
next: disc temps for disc output
* add libnsgif COPYING
oops, we were missing the COPYING file
see https://github.com/libvips/libvips/issues/2800
thanks mika-fischer
* tiffsave uses a disc temp if it can
* revise temp target rules
only make a disc temp if we are writing to a filesystem target
* add new target methods to targetcustom
2022-05-20 18:38:17 +01:00
0337c09700
Cleanup gettext handling ( #2695 )
...
Use GLib's i18n support instead of copying and pasting that
logic into its own header. This deprecates the vips/intl.h
header in favour of glib/gi18n.h.
2022-02-27 15:27:28 +00:00
561b670ea2
better dbg messages from tiffsave
2021-12-09 13:18:46 +00:00
53ee983b51
oop, debug left enabled by mistake
2021-10-20 14:28:15 +01:00
96604dba10
turning on subifd enable pyramid mode
...
see https://github.com/libvips/pyvips/issues/277
2021-10-20 10:40:03 +01:00
cf1228b927
fix page_height arg for tiffsave
...
it wasn't wired up, thanks @jacopoabramo
see https://github.com/libvips/pyvips/issues/277
2021-10-20 10:18:22 +01:00
1192d87acf
remove old libtiff numeric defines
...
use the glib ones instead rather than depending on stdint etc.
2021-10-01 17:29:43 +01:00
5397fe5a4f
note tiff change in changelog
2021-09-29 17:49:26 +01:00
be0b0d17b8
better tiff write looping
...
We were looping over pages, cropping each one out, and saving.
Now there's a single loop for thw whole of the image, so things like
percent reporting work in the obvious way.
See https://github.com/libvips/libvips/issues/2450
2021-09-29 17:45:58 +01:00
d4c5556c83
fix jp2k pyramid generation
...
8.11.1 broke it, unfortunately
2021-07-02 17:19:27 +01:00
8851150375
fix some tabs
2021-06-28 20:32:56 +01:00
4ee12e5675
trim some dead code
2021-06-28 20:31:09 +01:00
95bf1367ba
fix jpeg tiff pyramid save
...
we were not copying the quant tables on lower pyr levels correctly
add a test too
2021-06-28 20:24:00 +01:00
03f76b73b4
add "premultiply" param to tiffsave
...
Some programs, like indesign, only work with premultiplied alpha in TIFF. To
make TIFFs which are compatible with these programs, we'll need an extra
TIFF save flag (perhaps premultiply?) to premultiply alpha and save as
EXTRASAMPLE_ASSOCALPHA.
see https://github.com/libvips/libvips/issues/2192
2021-05-01 20:08:06 +01:00
7603c4b6ab
fix some small bugs
...
- disable chroma subsample for jp2k-in-tiff ... it didn't work due to opj bugs
- revise numresolutions setting
- require opj 2.4 or later
2021-04-30 10:42:32 +01:00
edcdf8af70
rebase add-jp2ktiff on master
2021-04-26 15:16:20 +01:00
b14bac53a3
guard refs to ZSTD
...
so we work on older libtiffs
2021-03-05 12:16:38 +00:00
495b54dfcf
grou predictor settings
2021-03-04 17:31:08 +00:00
4d0252f31c
add tiff zstd predictor support
2021-03-04 22:38:47 +08:00
86a6fd9d18
fix tiff deflate predictor setting
...
the enums were mixed up, thanks Adios
see https://github.com/libvips/libvips/issues/2128
2021-03-04 09:39:50 +00:00
85f3ac6d8f
fix tiff pyramid save region-shrink
...
we'd forgotton to connect it up
thanks imgifty
see https://github.com/libvips/libvips/issues/1875
2020-11-03 23:14:44 +00:00
fcaba0e6ba
add @profile to webpsave
...
small tiffsave fixes too
2020-07-18 14:49:37 +01:00
9246094033
Fix function pointer cast issues
...
It is undefined behavior in C and C++ to cast a function pointer
to another type and call it that way. This does work in most native
platforms, however, despite it being UB, but in WASM it can fail.
See:
https://emscripten.org/docs/porting/guidelines/function_pointer_issues.html
2020-06-30 13:35:41 +02:00
b2feb4805f
fix flush of left-over bits
...
we were not adjusting for pixel size, thanks MathemanFlo
see https://github.com/libvips/libvips/pull/1672#issuecomment-644807739
2020-06-18 14:54:09 +01:00
3b07f72b67
revise bit packing funcs in vips2tiff
...
smaller, simpler
2020-06-17 14:28:13 +01:00
19077b53ac
revise tiff2vips 1/2/4 bit load
...
simpler, faster, smaller
2020-06-17 13:59:02 +01:00
8b469b4516
adjust formatting of 2, 4 bit tiff load/save
...
To make it libvipsey. Small fixes as well.
2020-06-16 18:58:27 +01:00
0f0e8cb677
Fixed typo in bitdepth code
2020-06-16 16:27:11 +02:00
00bd91a3c4
Fixed issues with bitdepth
2020-06-16 16:21:52 +02:00
035e0bc756
Added read and write functionality for 2 and 4 bit greyscale TIF images
2020-06-09 11:23:28 +02:00
d5eecac88c
add note about plane separate write
2020-06-05 12:14:40 +01:00
460e1d0bf5
set n-subifds for tiff files
...
says how many subifds in the first page
2020-06-01 17:22:10 +01:00
d16f1e67dd
fix tile clipping in toilet roll images
...
we were not clipping unaligned tiled correctly
2020-06-01 13:22:51 +01:00
39af6c21c8
update notes
2020-06-01 00:55:19 +01:00
0bdd2290a0
fix tiff directory mixup
...
we were not always selecting the correct read directory
2020-06-01 00:39:15 +01:00
aaebb3b346
fix thumbnail of mono image
...
we were using RGB as the shrink space
2020-05-27 15:24:27 +01:00
474bfe3782
pytest and valgrind pass
...
remove some dbg code
2020-05-24 17:04:55 +01:00
a2d196b736
add subifd support to the TIFF writer
...
A new subifd switch enables the writing of pyramids layers into subifds
(rather than the default successive pages). This switch is enabled
automatically for multi-page pyramids.
seems to work in quick tests
2020-05-24 15:21:41 +01:00
84b9d1f638
seems to make an OME pyramid correctly
...
```
$ vips tiffsave ../k2.jpg x.tif --tile --pyramid --subifd && tiffinfo x.tif
TIFF Directory at offset 0x900008 (9437192)
Image Width: 1450 Image Length: 2048
Tile Width: 128 Tile Length: 128
Resolution: 72.009, 72.009 pixels/inch
Bits/Sample: 8
Sample Format: unsigned integer
Compression Scheme: None
Photometric Interpretation: RGB color
Orientation: row 0 top, col 0 lhs
Samples/Pixel: 3
Planar Configuration: single image plane
SubIFD Offsets: 11797898 12388230 12585130 12634526 0
```
2020-05-15 17:16:04 +01:00
7deead8911
add a subifd flag to tiffsave
2020-05-13 12:45:28 +01:00
03399b4d7e
tiff write sets page number
...
tiffsave sets `PAGENUMBER` and `FILETYPE_PAGE`, thanks jclavoie-jive
see https://github.com/libvips/libvips/issues/1565
2020-03-08 11:06:19 +00:00
a158b15b97
add LOGLUV TIFF support
...
libvips XYZ images load and save as libtiff LOGLUV
see https://github.com/libvips/libvips/issues/1506
2020-01-29 17:47:08 +00:00
42930e8d87
add "depth" param to tiffsave
...
Add a "depth" param to tiffsave to set pyramid depth, just like the
"depth" param on dzsave.
See https://github.com/libvips/libvips/issues/1485
2020-01-26 18:39:47 +00:00
252996e3ff
make check passes after stream -> source rename
2019-12-30 12:48:20 +00:00
4c5873809f
experiment with renaming stream
...
rename as VipsConnection, VipsSource, VipsTarget etc.
see https://github.com/libvips/libvips/issues/1494#issuecomment-569498619
renamed with this script:
```
set -e
edit() {
sed -i -E "$1" rename
}
for i in $*; do
cp $i rename
edit s/VIPS_STREAMOU/VIPS_TARGET_CUSTOM/g
edit s/VIPS_STREAMO/VIPS_TARGET/g
edit s/VIPS_STREAMIU/VIPS_SOURCE_CUSTOM/g
edit s/VIPS_STREAMI/VIPS_SOURCE/g
edit s/VIPS_STREAM/VIPS_CONNECTION/g
edit s/vips_streamou/vips_target_custom/g
edit s/vips_streamo/vips_target/g
edit s/vips_streamiu/vips_source_custom/g
edit s/vips_streami/vips_source/g
edit s/vips_stream/vips_connection/g
edit s/VipsStreamou/VipsTargetCustom/g
edit s/VipsStreamo/VipsTarget/g
edit s/VipsStreamiu/VipsSourceCustom/g
edit s/VipsStreami/VipsSource/g
edit s/VipsStream/VipsConnection/g
# eg. VIPS_TYPE_STREAM or VIPS_IS_STREAM
edit "s/VIPS_([A-Z]+)_STREAMOU/VIPS_\1_TARGET_CUSTOM/g"
edit "s/VIPS_([A-Z]+)_STREAMO/VIPS_\1_TARGET/g"
edit "s/VIPS_([A-Z]+)_STREAMIU/VIPS_\1_SOURCE_CUSTOM/g"
edit "s/VIPS_([A-Z]+)_STREAMI/VIPS_\1_SOURCE/g"
edit "s/VIPS_([A-Z]+)_STREAM/VIPS_\1_CONNECTION/g"
edit s/streamou/target_custom/g
edit s/streamo/target/g
edit s/streamiu/source_custom/g
edit s/streami/source/g
# various identifiers which also change
edit s/is_a_stream/is_a_source/g
edit s/find_load_stream/find_load_source/g
edit s/find_save_stream/find_save_target/g
edit s/new_from_stream/new_from_source/g
edit s/write_to_stream/write_to_target/g
edit s/vips_thumbnail_stream/vips_thumbnail_source/g
# eg. vips_webpload_stream
edit "s/vips_([a-z]+)load_stream/vips_\1load_source/g"
# eg. vips_webpsave_stream
edit "s/vips_([a-z]+)save_stream/vips_\1save_target/g"
mv rename $i
done
```
2019-12-29 21:40:21 +00:00
e1baf66f19
"squash" to tiffsave now does lab as well
...
The "squash" option to tiffsave now also squashes 32-bit 3-band float
CIELAB images down to 8 bits.
See https://github.com/libvips/libvips/issues/1499
2019-12-18 17:29:34 +00:00
112dc9101a
remove early shutdown from tiff reader
...
since streams do this automatically now
2019-12-13 14:19:09 +00:00
6fea2e7c57
clip negatives off LABS L in tiff save
...
Negative L in LABS needs to be trimmed off before savingf as TIFF.
Thanks angelmixu.
See https://github.com/libvips/libvips/issues/1499
2019-12-13 12:45:49 +00:00
40bffa8cc6
small reformats
...
plus remove save multiband as separated multiink
2019-12-07 17:41:53 +00:00
c85454f56c
Merge branch 'refs/heads/master' into improve-file-formats
...
# Conflicts:
# libvips/conversion/switch.c
2019-12-04 11:49:18 +01:00
John Cupitt
Kleis Auke Wolthuizen
AdiosF6F
Florian Heinrich
Angel Sánchez