/* nohalo level 1 interpolator * * Hacked for vips by J. Cupitt, 20/1/09 * Tweaks by N. Robidoux and J. Cupitt 3/09 * * 16/3/09 * - rename as nohalo1 * - move "restrict" support to configure */ /* This file is part of VIPS. VIPS is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ /* These files are distributed with VIPS - http://www.vips.ecs.soton.ac.uk */ /* * 2009 (c) Nicolas Robidoux * * Nicolas thanks Geert Jordaens, John Cupitt, Minglun Gong, Øyvind * Kolås and Sven Neumann for useful comments and code. * * Nicolas Robidoux's research on nohalo funded in part by an NSERC * (National Science and Engineering Research Council of Canada) * Discovery Grant. */ /* * ================ * NOHALO RESAMPLER * ================ * * "Nohalo" is a family of parameterized resamplers with a mission: * smoothly straightening oblique lines without undesirable * side-effects. In particular, without much blurring and with * absolutely no added haloing. * * The key parameter, which may be described as a "quality" parameter, * is an integer which specifies the number of "levels" of binary * subdivision which are performed. level = 0 can be thought of as * being plain vanilla bilinear resampling; level = 1 is then the * first "non-classical" method of the familiy. * * Although it increases computational cost, additional levels * increase the quality of the resampled pixel value unless the * resampled location happens to be exactly where a subdivided grid * point (for this level) is located, in which case further levels do * not change the answer, and consequently do not increase its * quality. * * =================================================== * THIS CODE ONLY IMPLEMENTS THE LOWEST QUALITY NOHALO * =================================================== * * This code implement nohalo for (quality) level = 1. Nohalo for * higher quality levels will be implemented later. * * Key properties: * * ======================= * Nohalo is interpolatory * ======================= * * That is, nohalo preserves point values: If asked for the value at * the center of an input pixel, the sampler returns the corresponding * value, unchanged. In addition, because nohalo is continuous, if * asked for a value at a location "very close" to the center of an * input pixel, then the sampler returns a value "very close" to * it. (Nohalo is not smoothing like, say, B-Spline * pseudo-interpolation.) * * ======================================================== * Nohalo is co-monotone (this is why it's called "nohalo") * ======================================================== * * What monotonicity more or less means here is that the resampled * value is in the range of the four closest input values. This * property is why there is no added haloing. It also implies that * clamping is unnecessary (provided abyss values are within the range * of acceptable values, which is always the case). (Note: plain * vanilla bilinear is also co-monotone.) * * Note: If the abyss policy is an extrapolating one---for example, * linear or bilinear extrapolation---clamping is still unnecessary * unless one attempts to resample outside of the convex hull of the * input pixel positions. Consequence: the "corner" image size * convention does not require clamping when using linear * extrapolation abyss policy when performing image resizing, but the * "center" one does, when upscaling, at locations very close to the * boundary. If computing values at locations outside of the convex * hull of the pixel locations of the input image, nearest neighbour * abyss policy is most likely better anyway, because linear * extrapolation produces "streaks" if positions far outside the * original image boundary are resampled. * * ======================== * Nohalo is a local method * ======================== * * The value of the reconstructed intensity surface at any point * depends on the values of (at most) 12 nearby input values, located * in a "cross" centered at the closest four input pixel centers. * * =========================================================== * When level = infinity, nohalo's intensity surface is smooth * =========================================================== * * It is conjectured that the intensity surface is infinitely * differentiable. Consequently, "Mach banding" (primarily caused by * sharp "ridges" in the reconstructed intensity surface and * particularly noticeable, for example, when using bilinear * resampling) is (essentially) absent, even at high magnifications, * WHEN THE LEVEL IS HIGH (more or less when 2^(level+1) is at least * the largest local magnification factor, which means that the level * 1 nohalo does not show much Mach banding up to a magnification of * about 4). * * =============================== * Nohalo is second order accurate * =============================== * * (Except possibly near the boundary: it is easy to make this * property carry over everywhere but this requires a tuned abyss * policy---linear extrapolation, say---or building the boundary * conditions inside the sampler.) Nohalo is exact on linear * intensity profiles, meaning that if the input pixel values (in the * stencil) are obtained from a function of the form f(x,y) = a + b*x * + c*y (a, b, c constants), then the computed pixel value is exactly * the value of f(x,y) at the asked-for sampling location. The * boundary condition which is emulated by VIPS throught the "extend" * extension of the input image---this corresponds to the nearest * neighbour abyss policy---does NOT make this resampler exact on * linears at the boundary. It does, however, guarantee that no * clamping is required even when resampled values are computed at * positions outside of the extent of the input image (when * extrapolation is required). * * =================== * Nohalo is nonlinear * =================== * * In particular, resampling a sum of images may not be the same as * summing the resamples. (This occurs even without taking into account * over and underflow issues: images can only take values within a * banded range, and consequently no sampler is truly linear.) * * ==================== * Weaknesses of nohalo * ==================== * * In some cases, the first level nonlinear computation is wasted: * * If a region is bichromatic, the nonlinear component of the level 1 * nohalo is zero in the interior of the region, and consequently * nohalo boils down to bilinear. For such images, either stick to * bilinear, or use a higher level (quality) setting. (There is no * real harm in using nohalo when it boils down to bilinear if one * does not mind wasting cycles.) * * Low quality levels do NOT produce a continuously differentiable * intensity surface: * * With a "finite" level is used (that is, in practice), the nohalo * intensity surface is only continuous: there are gradient * discontinuities because the "final interpolation step" is performed * with bilinear. (Exception: if the "corner" image size convention is * used and the magnification factor is 2, that is, if the resampled * points sit exactly on the binary subdivided grid, then nohalo level * 1 gives the same result as as level=infinity, and consequently the * intensity surface can be treated as if smooth.) */ #ifdef HAVE_CONFIG_H #include #endif /*HAVE_CONFIG_H*/ #include #include #include #include #include #include "templates.h" /* * FAST_PSEUDO_FLOOR is a floor and floorf replacement which has been * found to be faster on several linux boxes than the library * version. It returns the floor of its argument unless the argument * is a negative integer, in which case it returns one less than the * floor. For example: * * FAST_PSEUDO_FLOOR(0.5) = 0 * * FAST_PSEUDO_FLOOR(0.) = 0 * * FAST_PSEUDO_FLOOR(-.5) = -1 * * as expected, but * * FAST_PSEUDO_FLOOR(-1.) = -2 * * The locations of the discontinuities of FAST_PSEUDO_FLOOR are the * same as floor and floorf; it is just that at negative integers the * function is discontinuous on the right instead of the left. */ #define FAST_PSEUDO_FLOOR(x) ( (int)(x) - ( (x) < 0. ) ) /* * FAST_MINMOD is an implementation of the minmod function which only * needs two conditional moves. (Nicolas: I think that this may be * the very first two branch minmod.) The product of the two arguments * and a useful difference involving them are also precomputed to keep * them out of branching way. */ #define FAST_MINMOD(a,b,ab,abminusaa) \ ( (ab)>=0. ? ( (abminusaa)>=0. ? (a) : (b) ) : 0. ) #define VIPS_TYPE_INTERPOLATE_NOHALO1 \ (vips_interpolate_nohalo1_get_type()) #define VIPS_INTERPOLATE_NOHALO1( obj ) \ (G_TYPE_CHECK_INSTANCE_CAST( (obj), \ VIPS_TYPE_INTERPOLATE_NOHALO1, VipsInterpolateNohalo1 )) #define VIPS_INTERPOLATE_NOHALO1_CLASS( klass ) \ (G_TYPE_CHECK_CLASS_CAST( (klass), \ VIPS_TYPE_INTERPOLATE_NOHALO1, VipsInterpolateNohalo1Class)) #define VIPS_IS_INTERPOLATE_NOHALO1( obj ) \ (G_TYPE_CHECK_INSTANCE_TYPE( (obj), VIPS_TYPE_INTERPOLATE_NOHALO1 )) #define VIPS_IS_INTERPOLATE_NOHALO1_CLASS( klass ) \ (G_TYPE_CHECK_CLASS_TYPE( (klass), VIPS_TYPE_INTERPOLATE_NOHALO1 )) #define VIPS_INTERPOLATE_NOHALO1_GET_CLASS( obj ) \ (G_TYPE_INSTANCE_GET_CLASS( (obj), \ VIPS_TYPE_INTERPOLATE_NOHALO1, VipsInterpolateNohalo1Class )) typedef struct _VipsInterpolateNohalo1 { VipsInterpolate parent_object; } VipsInterpolateNohalo1; typedef struct _VipsInterpolateNohalo1Class { VipsInterpolateClass parent_class; } VipsInterpolateNohalo1Class; static void inline nohalo1( const double uno_two, const double uno_thr, const double dos_one, const double dos_two, const double dos_thr, const double dos_fou, const double tre_one, const double tre_two, const double tre_thr, const double tre_fou, const double qua_two, const double qua_thr, double* restrict r1, double* restrict r2, double* restrict r3 ) { /* * This function calculates the missing three double density pixel * values. The caller does bilinear interpolation on them and * dos_two. */ /* * THE STENCIL OF INPUT VALUES: * * Nohalo's stencil is the same as, say, Catmull-Rom, with the * exception that the four corner values are not used: * * (ix,iy-1) (ix+1,iy-1) * = uno_two = uno_thr * * (ix-1,iy) (ix,iy) (ix+1,iy) (ix+2,iy) * = dos_one = dos_two = dos_thr = dos_fou * * (ix-1,iy+1) (ix,iy+1) (ix+1,iy+1) (ix+2,iy+1) * = tre_one = tre_two = tre_thr = tre_fou * * (ix,iy+2) (ix+1,iy+2) * = qua_two = qua_thr * * Here, ix is the floor of the requested left-to-right location, iy * is the floor of the requested up-to-down location. * * Pointer arithmetic is used to implicitly reflect the input * stencil so that the requested pixel location is closer to * dos_two, The above consequently corresponds to the case in which * absolute_x is closer to ix than ix+1, and absolute_y is closer to * iy than iy+1. For example, if relative_x_is_rite = 1 but * relative_y_is_down = 0 (see below), then dos_two corresponds to * (ix+1,iy), dos_thr corresponds to (ix,iy) etc. Consequently, the * three missing double density values (corresponding to r1, r2 and * r3) are halfway between dos_two and dos_thr, halfway between * dos_two and tre_two, and at the average of the four central * positions. * * The following code assumes that the stencil reflection has * already been performed. */ /* * Computation of the nonlinear slopes: If two consecutive pixel * value differences have the same sign, the smallest one (in * absolute value) is taken to be the corresponding slope; if the * two consecutive pixel value differences don't have the same sign, * the corresponding slope is set to 0. In other words, apply minmod * to comsecutive differences. */ /* * Dos(s) horizontal differences: */ const double prem_dos = dos_two - dos_one; const double deux_dos = dos_thr - dos_two; const double troi_dos = dos_fou - dos_thr; /* * Tre(s) horizontal differences: */ const double prem_tre = tre_two - tre_one; const double deux_tre = tre_thr - tre_two; const double troi_tre = tre_fou - tre_thr; /* * Two vertical differences: */ const double prem_two = dos_two - uno_two; const double deux_two = tre_two - dos_two; const double troi_two = qua_two - tre_two; /* * Thr(ee) vertical differences: */ const double prem_thr = dos_thr - uno_thr; const double deux_thr = tre_thr - dos_thr; const double troi_thr = qua_thr - tre_thr; /* * Products and differences useful for minmod: */ const double deux_prem_dos = deux_dos * prem_dos; const double deux_deux_dos = deux_dos * deux_dos; const double deux_troi_dos = deux_dos * troi_dos; const double deux_prem_two = deux_two * prem_two; const double deux_deux_two = deux_two * deux_two; const double deux_troi_two = deux_two * troi_two; const double deux_prem_minus_deux_deux_dos = deux_prem_dos - deux_deux_dos; const double deux_troi_minus_deux_deux_dos = deux_troi_dos - deux_deux_dos; const double deux_prem_minus_deux_deux_two = deux_prem_two - deux_deux_two; const double deux_troi_minus_deux_deux_two = deux_troi_two - deux_deux_two; const double deux_prem_tre = deux_tre * prem_tre; const double deux_deux_tre = deux_tre * deux_tre; const double deux_troi_tre = deux_tre * troi_tre; const double deux_prem_thr = deux_thr * prem_thr; const double deux_deux_thr = deux_thr * deux_thr; const double deux_troi_thr = deux_thr * troi_thr; const double deux_prem_minus_deux_deux_tre = deux_prem_tre - deux_deux_tre; const double deux_troi_minus_deux_deux_tre = deux_troi_tre - deux_deux_tre; const double deux_prem_minus_deux_deux_thr = deux_prem_thr - deux_deux_thr; const double deux_troi_minus_deux_deux_thr = deux_troi_thr - deux_deux_thr; /* * Useful sums: */ const double dos_two_plus_dos_thr = dos_two + dos_thr; const double dos_two_plus_tre_two = dos_two + tre_two; const double deux_thr_plus_deux_dos = deux_thr + deux_dos; /* * Compute the needed "right" (at the boundary between one input * pixel areas) double resolution pixel value: */ const double four_times_dos_twothr = FAST_MINMOD( deux_dos, prem_dos, deux_prem_dos, deux_prem_minus_deux_deux_dos ) - FAST_MINMOD( deux_dos, troi_dos, deux_troi_dos, deux_troi_minus_deux_deux_dos ) + 2. * dos_two_plus_dos_thr; /* * Compute the needed "down" double resolution pixel value: */ const double four_times_dostre_two = FAST_MINMOD( deux_two, prem_two, deux_prem_two, deux_prem_minus_deux_deux_two ) - FAST_MINMOD( deux_two, troi_two, deux_troi_two, deux_troi_minus_deux_deux_two ) + 2. * dos_two_plus_tre_two; /* * Compute the "diagonal" (at the boundary between thrr input * pixel areas) double resolution pixel value: */ const double piece_of_eight_times_dostre_twothr = four_times_dos_twothr + four_times_dostre_two + 2. * deux_thr_plus_deux_dos; const double eight_times_dostre_twothr = FAST_MINMOD( deux_tre, prem_tre, deux_prem_tre, deux_prem_minus_deux_deux_tre ) - FAST_MINMOD( deux_tre, troi_tre, deux_troi_tre, deux_troi_minus_deux_deux_tre ) + piece_of_eight_times_dostre_twothr + FAST_MINMOD( deux_thr, prem_thr, deux_prem_thr, deux_prem_minus_deux_deux_thr ) - FAST_MINMOD( deux_thr, troi_thr, deux_troi_thr, deux_troi_minus_deux_deux_thr ); /* * Return the first newly computed double density values: */ *r1 = four_times_dos_twothr; *r2 = four_times_dostre_two; *r3 = eight_times_dostre_twothr; } /* Call nohalo1 with an interpolator as a parameter. * It'd be nice to do this with templates somehow :-( but I can't see a * clean way to do it. */ #define NOHALO1_INTER( inter ) \ template static void inline \ nohalo1_ ## inter( PEL* restrict pout, \ const PEL* restrict pin, \ const int bands, \ const int lskip, \ const double relative_x, \ const double relative_y ) \ { \ T* restrict out = (T *) pout; \ \ const int relative_y_is_down = ( relative_y >= 0. ); \ const int relative_x_is_rite = ( relative_x >= 0. ); \ \ const int sign_of_relative_y = 2 * relative_y_is_down - 1; \ const int sign_of_relative_x = 2 * relative_x_is_rite - 1; \ \ const int corner_reflection_shift = \ relative_y_is_down * lskip + relative_x_is_rite * bands; \ \ const int shift_1_row = sign_of_relative_y * lskip; \ const int shift_1_pixel = sign_of_relative_x * bands; \ \ const T* restrict in = ( (T *) pin ) + corner_reflection_shift; \ \ const int uno_two_shift = shift_1_row; \ const int uno_thr_shift = shift_1_row - shift_1_pixel; \ \ const int dos_one_shift = shift_1_pixel; \ const int dos_two_shift = 0; \ const int dos_thr_shift = -shift_1_pixel; \ \ const double w = ( 2 * sign_of_relative_x ) * relative_x; \ const double z = ( 2 * sign_of_relative_y ) * relative_y; \ \ const int dos_fou_shift = 2 * dos_thr_shift; \ \ const double x = 1. - w; \ \ const int tre_one_shift = dos_one_shift - shift_1_row; \ const int tre_two_shift = -shift_1_row; \ const int tre_thr_shift = dos_thr_shift - shift_1_row; \ const int tre_fou_shift = dos_fou_shift - shift_1_row; \ \ const double w_times_z = w * z; \ const double x_times_z = x * z; \ \ const int qua_two_shift = tre_two_shift - shift_1_row; \ const int qua_thr_shift = tre_thr_shift - shift_1_row; \ \ const double w_times_y_over_4 = .25 * ( w - w_times_z ); \ const double x_times_z_over_4 = .25 * x_times_z; \ const double x_times_y_over_8 = .125 * ( x - x_times_z ); \ \ int band = bands; \ \ do \ { \ double four_times_dos_twothr; \ double four_times_dostre_two; \ double eight_times_dostre_twothr; \ \ const double dos_two = in[dos_two_shift]; \ \ nohalo1( in[uno_two_shift], in[uno_thr_shift], \ in[dos_one_shift], dos_two, \ in[dos_thr_shift], in[dos_fou_shift], \ in[tre_one_shift], in[tre_two_shift], \ in[tre_thr_shift], in[tre_fou_shift], \ in[qua_two_shift], in[qua_thr_shift], \ &four_times_dos_twothr, \ &four_times_dostre_two, \ &eight_times_dostre_twothr ); \ \ const T result = bilinear_ ## inter( w_times_z, \ x_times_z_over_4, \ w_times_y_over_4, \ x_times_y_over_8, \ dos_two, \ four_times_dos_twothr, \ four_times_dostre_two, \ eight_times_dostre_twothr ); \ \ in++; \ *out++ = result; \ } while (--band); \ } NOHALO1_INTER( float ) NOHALO1_INTER( signed ) NOHALO1_INTER( unsigned ) /* We need C linkage for this. */ extern "C" { G_DEFINE_TYPE( VipsInterpolateNohalo1, vips_interpolate_nohalo1, VIPS_TYPE_INTERPOLATE ); } static void vips_interpolate_nohalo1_interpolate( VipsInterpolate* restrict interpolate, PEL* restrict out, REGION* restrict in, double absolute_x, double absolute_y ) { /* * VIPS versions of Nicolas's pixel addressing values. */ const int actual_bands = in->im->Bands; const int lskip = IM_REGION_LSKIP( in ) / IM_IMAGE_SIZEOF_ELEMENT( in->im ); const double absolute_y_minus_half = absolute_y - .5; const double absolute_x_minus_half = absolute_x - .5; /* * floor's surrogate FAST_PSEUDO_FLOOR is used to make sure that the * transition through 0 is smooth. If it is known that absolute_x * and absolute_y will never be less than 0, plain cast---that is, * const int ix = absolute_x---should be used instead. Actually, * any function which agrees with floor for non-integer values, and * picks one of the two possibilities for integer values, can be * used. FAST_PSEUDO_FLOOR fits the bill. * * Then, x is the x-coordinate of the sampling point relative to the * position of the center of the convex hull of the 2x2 block of * closest pixels. Similarly for y. Range of values: [-.5,.5). */ const int iy = FAST_PSEUDO_FLOOR (absolute_y); const double relative_y = absolute_y_minus_half - iy; const int ix = FAST_PSEUDO_FLOOR (absolute_x); const double relative_x = absolute_x_minus_half - ix; /* * Move the pointer to (the first band of) the top/left pixel of the * 2x2 group of pixel centers which contains the sampling location * in its convex hull: */ const PEL* restrict p = (PEL *) IM_REGION_ADDR( in, ix, iy ); /* * Double bands for complex images: */ const int bands = ( im_iscomplex( in->im ) ? 2 * actual_bands : actual_bands ); #define CALL( T, inter ) \ nohalo1_ ## inter( out, \ p, \ bands, \ lskip, \ relative_x, \ relative_y ); switch( in->im->BandFmt ) { case IM_BANDFMT_UCHAR: CALL( unsigned char, unsigned ); break; case IM_BANDFMT_CHAR: CALL( signed char, signed ); break; case IM_BANDFMT_USHORT: CALL( unsigned short, unsigned ); break; case IM_BANDFMT_SHORT: CALL( signed short, signed ); break; case IM_BANDFMT_UINT: CALL( unsigned int, unsigned ); break; case IM_BANDFMT_INT: CALL( signed int, signed ); break; /* Complex images handled by doubling of bands, see above. */ case IM_BANDFMT_FLOAT: case IM_BANDFMT_COMPLEX: CALL( float, float ); break; case IM_BANDFMT_DOUBLE: case IM_BANDFMT_DPCOMPLEX: CALL( double, float ); break; default: g_assert( 0 ); break; } } static void vips_interpolate_nohalo1_class_init( VipsInterpolateNohalo1Class *klass ) { VipsObjectClass *object_class = VIPS_OBJECT_CLASS( klass ); VipsInterpolateClass *interpolate_class = VIPS_INTERPOLATE_CLASS( klass ); object_class->nickname = "nohalo1"; object_class->description = _( "Edge-enhancing bilinear" ); interpolate_class->interpolate = vips_interpolate_nohalo1_interpolate; interpolate_class->window_size = 4; } static void vips_interpolate_nohalo1_init( VipsInterpolateNohalo1 *nohalo ) { }