nuttx-apps/examples/foc/Kconfig

#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#

menuconfig EXAMPLES_FOC
	tristate "FOC motor controller example"
	depends on MOTOR_FOC
	depends on INDUSTRY_FOC
	---help---
		Enable the FOC motor controller example.
		At the moment, this example implements a simple open-loop velocity controller.

if EXAMPLES_FOC

config EXAMPLES_FOC_DEVPATH
	string "FOC device path prefix"
	default "/dev/foc"
	---help---
		The default path to the FOC device without the device minor number.
		Default: /dev/foc

config EXAMPLES_FOC_FLOAT_INST
	int "FOC float instances"
	depends on INDUSTRY_FOC_FLOAT
	default 0

config EXAMPLES_FOC_FIXED16_INST
	int "FOC fixed16 instances"
	depends on INDUSTRY_FOC_FIXED16
	default 0

config EXAMPLES_FOC_CONTROL_PRIO
	int "FOC control thread priority"
	default 255

config EXAMPLES_FOC_CONTROL_STACKSIZE
	int "FOC control thread stack size"
	default 4096

config EXAMPLES_FOC_VERBOSE
	int "Enable verbose print for app"
	default 1
	range 0 2

config EXAMPLES_FOC_PWM_FREQ
	int "FOC PWM frequency"
	default 10000
	---help---
		Select the FOC PWM switching frequency

config EXAMPLES_FOC_NOTIFIER_FREQ
	int "FOC notifier frequency"
	default EXAMPLES_FOC_PWM_FREQ
	---help---
		Select the FOC notifier frequency

config EXAMPLES_FOC_IPHASE_ADC
	int "FOC phase current scale [x100000]"
	default 0
	---help---
		This parameter is used to get real currents from ADC RAW values

config EXAMPLES_FOC_STATE_PRINT_FREQ
	int "FOC example data printer frequency"
	default 0
	depends on INDUSTRY_FOC_HANDLER_PRINT
	---help---
		Set 0 to disable FOC data print

config EXAMPLES_FOC_STATE_USE_MODEL_PMSM
	bool "FOC uses PMSM model"
	depends on INDUSTRY_FOC_MODEL_PMSM
	default n
	---help---
		Use PMSM model instead of real hardware

choice
	prompt "FOC sensored or sensorless configuration"
	default EXAMPLES_FOC_SENSORLESS

config EXAMPLES_FOC_SENSORLESS
	bool "FOC example sensorless configuration"

config EXAMPLES_FOC_SENSORED
	bool "FOC example sensored configuration"
	select EXAMPLES_FOC_HAVE_ALIGN

endchoice #

if EXAMPLES_FOC_SENSORED

choice
	prompt "FOC sensored sensor selection"

config EXAMPLES_FOC_HAVE_QENCO
	bool "FOC example have qencoder"
	select INDUSTRY_FOC_ANGLE_QENCO

config EXAMPLES_FOC_HAVE_HALL
	bool "FOC example Hall sensor support"
	select INDUSTRY_FOC_ANGLE_HALL

endchoice # FOC sensored sensor selection

if EXAMPLES_FOC_HAVE_QENCO

config EXAMPLES_FOC_MOTOR_POLES
	int "FOC example motor poles pairs"
	default 0

config EXAMPLES_FOC_QENCO_POSMAX
	int "FOC example qencoder maximum position"
	default 0

config EXAMPLES_FOC_QENCO_DEVPATH
	string "FOC example qencoder path prefix"
	default "/dev/qe"
	---help---
		The default path to the qenco device without the device minor number.
		Default: /dev/qenco

endif # EXAMPLES_FOC_HAVE_QENCO

if EXAMPLES_FOC_HAVE_HALL

config EXAMPLES_FOC_HALL_DEVPATH
	string "FOC example Hall sensor path prefix"
	default "/dev/hall"
	---help---
		The default path to the Hall device without the device minor number.
		Default: /dev/hall

endif # EXAMPLES_FOC_HAVE_HALL

endif # EXAMPLES_FOC_SENSORED

config EXAMPLES_FOC_HAVE_OPENLOOP
	bool "FOC example have open-loop controller"
	select INDUSTRY_FOC_ANGLE_OPENLOOP
	default y if EXAMPLES_FOC_SENSORLESS
	default n

config EXAMPLES_FOC_HAVE_TORQ
	bool "FOC example torque controller support"
	default n

config EXAMPLES_FOC_HAVE_VEL
	bool "FOC example velocity controller support"
	default y if EXAMPLES_FOC_SENSORLESS
	default n

config EXAMPLES_FOC_HAVE_POS
	bool "FOC example position controller support"
	default n

menu "FOC user input"

config EXAMPLES_FOC_HAVE_ADC
	bool
	default n

choice
	prompt "FOC VBUS source"
	default EXAMPLES_FOC_VBUS_CONST

config EXAMPLES_FOC_VBUS_CONST
	bool "Use hardcoded constant VBUS value"

config EXAMPLES_FOC_VBUS_ADC
	bool "Use VBUS provided by ADC interface"
	depends on ADC
	select EXAMPLES_FOC_HAVE_ADC

endchoice # FOC VBUS interface

if EXAMPLES_FOC_VBUS_CONST

config EXAMPLES_FOC_VBUS_CONST_VALUE
	int "FOC VBUS constant value"
	default 12000

endif # EXAMPLES_FOC_VBUS_CONST

if EXAMPLES_FOC_HAVE_ADC

config EXAMPLES_FOC_ADC_DEVPATH
	string "FOC ADC interface path"
	default "/dev/adc0"

config EXAMPLES_FOC_ADC_VREF
	int "FOC ADC reference votlage [x1000]"
	default 0

config EXAMPLES_FOC_ADC_MAX
	int "FOC ADC aux maximum sample value"
	default 0

endif # EXAMPLES_FOC_HAVE_ADC

if EXAMPLES_FOC_VBUS_ADC

config EXAMPLES_FOC_VBUS_SCALE
	int "FOC VBUS SCALE scale [x1000]"
	default 0

endif # EXAMPLES_FOC_VBUS_ADC

choice
	prompt "FOC setpoint source"
	default EXAMPLES_FOC_SETPOINT_CONST

config EXAMPLES_FOC_SETPOINT_CONST
	bool "Use hardcoded constant setpiont value"

config EXAMPLES_FOC_SETPOINT_ADC
	bool "Use ADC to control setpoint"
	select EXAMPLES_FOC_HAVE_ADC
	select EXAMPLES_FOC_HAVE_SETPOINT_VAR

config EXAMPLES_FOC_SETPOINT_CHAR
	bool "Use character interface to control setpoint"
	select EXAMPLES_FOC_HAVE_CHARCTRL
	select EXAMPLES_FOC_HAVE_SETPOINT_VAR

endchoice # FOC setpoint interface

config EXAMPLES_FOC_HAVE_SETPOINT_VAR
	bool
	default n

if EXAMPLES_FOC_SETPOINT_CONST

config EXAMPLES_FOC_SETPOINT_CONST_VALUE
	int "FOC hardoced setpoint value"
	default 0

endif # EXAMPLES_FOC_SETPOINT_CONST

if EXAMPLES_FOC_HAVE_SETPOINT_VAR

config EXAMPLES_FOC_SETPOINT_MAX
	int "FOC maximum setpoint [x1000]"
	default 0

endif # EXAMPLES_FOC_HAVE_SETPOINT_VAR

config EXAMPLES_FOC_TIME_DEFAULT
	int "FOC run time default (sec)"
	default 10

config EXAMPLES_FOC_STATE_INIT
	int "FOC motor controller state init"
	default 1
	range 1 4
	---help---
		1 - motor FREE (no current)
		2 - motor STOP (active break)
		3 - motor moves in CW direction
		4 - motor moves in CCW direction

config EXAMPLES_FOC_HAVE_BUTTON
	bool "FOC button support"
	default n
	---help---
		The button is used to change the motor controller state

if EXAMPLES_FOC_HAVE_BUTTON

config EXAMPLES_FOC_BUTTON_DEVPATH
	string "FOC button device path"
	default "/dev/buttons"
	depends on INPUT_BUTTONS

endif

config EXAMPLES_FOC_HAVE_CHARCTRL
	bool "FOC character control interface support"
	default n
	---help---
		Use simple character commands to interact with the app

if EXAMPLES_FOC_HAVE_CHARCTRL

config EXAMPLES_FOC_CHAR_SETPOINT_STEP
	int "FOC character control setpoint step [x1000]"
	default 0

endif

endmenu # FOC user input

menu "FOC controller parameters"

config EXAMPLES_FOC_FMODE
	int "FOC control mode"
	default 2
	range 1 3
	---help---
		1 - IDLE mode
		2 - voltage mode (default)
		3 - current mode

config EXAMPLES_FOC_MMODE
	int "Motor control mode"
	default 2
	range 1 3
	---help---
		1 - torque control
		2 - velocity control
		3 - position control

config EXAMPLES_FOC_OPENLOOP_Q
	int "FOC open-loop Vq/Iq setting [x1000]"
	default 200
	depends on EXAMPLES_FOC_HAVE_OPENLOOP

config EXAMPLES_FOC_IDQ_KP
	int "FOC PI controller Kp gain [x1000]"
	default 0
	---help---
		It is set to 0 by default and must be properly configured by the user!
		The vaule of Kp and Ki depends on the controlled motor parameters.
		For more instructions see README.md for this example.

config EXAMPLES_FOC_IDQ_KI
	int "FOC PI controller Ki gain [x1000]"
	default 0
	---help---
		It is set to 0 by default and must be properly configured by the user!
		The vaule of Kp and Ki depends on the controlled motor parameters.
		For more instructions see README.md for this example.

config EXAMPLES_FOC_RAMP_THR
	int "FOC velocity ramp threshold [x1000]"
	default 0

config EXAMPLES_FOC_RAMP_ACC
	int "FOC velocity ramp acc [x1000]"
	default 0

config EXAMPLES_FOC_RAMP_DEC
	int "FOC velocity ramp dec [x1000]"
	default 0

config EXAMPLES_FOC_HAVE_ALIGN
	bool "FOC example motor alignment support"
	select INDUSTRY_FOC_ALIGN
	default n

if EXAMPLES_FOC_HAVE_ALIGN

config EXAMPLES_FOC_ALIGN_VOLT
	int "EXAMPLES_FOC_ALIGN_VOLT (x1000)"
	default 0

config EXAMPLES_FOC_ALIGN_SEC
	int "EXAMPLES_FOC_ALIGN_SEC (x1000)"
	default 0

endif # EXAMPLES_FOC_HAVE_ALIGN

endmenu # FOC controller parameters

endif # EXAMPLES_FOC