nuttx-apps/wireless/ieee802154/i8sak/i8sak_acceptassoc.c

212 lines
6.4 KiB
C
Raw Normal View History

/****************************************************************************
* apps/wireless/ieee802154/i8sak/i8sak_acceptassoc.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/ioctl.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <fcntl.h>
#include <assert.h>
#include <errno.h>
#include <nuttx/fs/ioctl.h>
#include "i8sak.h"
#include <nuttx/wireless/ieee802154/ieee802154_mac.h>
#include "wireless/ieee802154.h"
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
static void acceptassoc_eventcb(FAR struct ieee802154_primitive_s *primitive,
FAR void *arg);
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name : i8_acceptassoc
*
* Description :
* Start accepting association requests.
****************************************************************************/
void i8sak_acceptassoc_cmd(FAR struct i8sak_s *i8sak, int argc,
FAR char *argv[])
{
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
struct i8sak_eventfilter_s filter;
bool acceptall = true; /* Start off assuming we are going to allow all
* connections */
int option;
int optcnt;
int fd;
optcnt = 0;
while ((option = getopt(argc, argv, ":he:")) != ERROR)
{
optcnt++;
switch (option)
{
case 'h':
fprintf(stderr, "Starts accepting association requests\n"
"Usage: %s [-h|e <extended address>]\n"
" -h = this help menu\n"
" -e = only accept requests from eaddr\n"
"Note: No option accepts all requests\n"
, argv[0]);
/* Must manually reset optind if we are going to exit early */
optind = -1;
return;
case 'e': /* Accept only this extended address */
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
i8sak_str2eaddr(optarg, &i8sak->ep_addr.eaddr[0]);
acceptall = false;
break;
case ':':
fprintf(stderr, "ERROR: missing argument\n");
/* Must manually reset optind if we are going to exit early */
optind = -1;
i8sak_cmd_error(i8sak); /* This exits for us */
case '?':
fprintf(stderr, "ERROR: invalid argument\n");
/* Must manually reset optind if we are going to exit early */
optind = -1;
i8sak_cmd_error(i8sak); /* This exits for us */
}
}
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
if (i8sak->mode == I8SAK_MODE_CHAR)
{
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
fd = open(i8sak->ifname, O_RDWR);
if (fd < 0)
{
fprintf(stderr, "ERROR: cannot open %s, errno=%d\n",
i8sak->ifname, errno);
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
i8sak_cmd_error(i8sak);
}
ieee802154_setassocpermit(fd, true);
}
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
#ifdef CONFIG_NET_6LOWPAN
else if (i8sak->mode == I8SAK_MODE_NETIF)
{
fd = socket(PF_INET6, SOCK_DGRAM, 0);
if (fd < 0)
{
fprintf(stderr, "ERROR: failed to open socket, errno=%d\n", errno);
i8sak_cmd_error(i8sak);
}
2017-06-26 19:12:53 +02:00
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
sixlowpan_setassocpermit(fd, i8sak->ifname, true);
}
#endif
if (!optcnt)
{
i8sak->acceptall = acceptall;
printf("i8sak: accepting all assoc requests\n");
}
i8sak_requestdaemon(i8sak);
/* Register new callback for receiving the association notifications */
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
memset(&filter, 0, sizeof(struct i8sak_eventfilter_s));
filter.indevents.assoc = true;
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
i8sak_eventlistener_addreceiver(i8sak, acceptassoc_eventcb, &filter,
!i8sak->acceptall);
}
static void acceptassoc_eventcb(FAR struct ieee802154_primitive_s *primitive,
FAR void *arg)
{
FAR struct i8sak_s *i8sak = (FAR struct i8sak_s *)arg;
struct ieee802154_assoc_resp_s assocresp;
printf("i8sak: a device is trying to associate\n");
/* Send a ASSOC.resp primtive to the MAC. Copy the association
* indication address into the association response primitive
*/
IEEE802154_EADDRCOPY(assocresp.devaddr, primitive->u.assocind.devaddr);
2017-06-15 18:51:25 +02:00
/* If the address matches our device, accept the association.
* Otherwise, reject the association.
*/
if (i8sak->acceptall ||
IEEE802154_EADDRCMP(primitive->u.assocind.devaddr,
i8sak->ep_addr.eaddr))
{
/* Assign the short address */
IEEE802154_SADDRCOPY(assocresp.assocsaddr, i8sak->next_saddr);
/* Select a short address for the next association */
i8sak->next_saddr[0]++;
if (i8sak->next_saddr[0] == 0)
{
/* Handle the carry */
i8sak->next_saddr[1]++;
DEBUGASSERT(i8sak->next_saddr[1] != 0);
}
assocresp.status = IEEE802154_STATUS_SUCCESS;
printf("i8sak: accepting association request\n");
}
else
{
assocresp.status = IEEE802154_STATUS_DENIED;
printf("i8sak: rejecting association request\n");
}
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
if (i8sak->mode == I8SAK_MODE_CHAR)
{
ieee802154_assoc_resp(i8sak->fd, &assocresp);
}
#ifdef CONFIG_NET_6LOWPAN
else if (i8sak->mode == I8SAK_MODE_NETIF)
{
sixlowpan_assoc_resp(i8sak->fd, i8sak->ifname, &assocresp);
}
#endif
}