nuttx-apps/wireless/ieee802154/libmac/sixlowpan_getreq.c

242 lines
6.5 KiB
C
Raw Normal View History

/****************************************************************************
* apps/wireless/ieee802154/libmac/sixlowpan_getreq.c
*
* Copyright (C) 2017 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/ioctl.h>
#include <stdint.h>
#include <stdio.h>
#include <string.h>
#include <errno.h>
#include <nuttx/fs/ioctl.h>
#include <nuttx/wireless/ieee802154/ieee802154_mac.h>
#include "wireless/ieee802154.h"
/****************************************************************************
* Public Functions
****************************************************************************/
int sixlowpan_get_req(int sock, FAR const char *ifname,
FAR const struct ieee802154_get_req_s *req)
{
struct ieee802154_netmac_s arg;
int ret;
strncpy(arg.ifr_name, ifname, IFNAMSIZ);
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
/* We must use a shadow arg to perform the operation as we must add the
* network interface name to the front of the argument.
*/
arg.u.getreq.attr = req->attr;
ret = ioctl(sock, MAC802154IOC_MLME_GET_REQUEST,
(unsigned long)((uintptr_t)&arg));
if (ret < 0)
{
ret = -errno;
fprintf(stderr, "MAC802154IOC_MLME_GET_REQUEST failed: %d\n", ret);
}
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
memcpy((void *)req, &arg.u.getreq, sizeof(struct ieee802154_get_req_s));
return ret;
}
/* Wrappers around get_req to make it even easier to get common attributes */
int sixlowpan_getchan(int sock, FAR const char *ifname, FAR uint8_t *chan)
{
struct ieee802154_get_req_s req;
int ret;
req.attr = IEEE802154_ATTR_PHY_CHAN;
ret = sixlowpan_get_req(sock, ifname, &req);
*chan = req.attrval.phy.chan;
return ret;
}
int sixlowpan_geteaddr(int sock, FAR const char *ifname, FAR uint8_t *eaddr)
{
struct ieee802154_get_req_s req;
int ret;
req.attr = IEEE802154_ATTR_MAC_EADDR;
ret = sixlowpan_get_req(sock, ifname, &req);
IEEE802154_EADDRCOPY(eaddr, req.attrval.mac.eaddr);
return ret;
}
int sixlowpan_getsaddr(int sock, FAR const char *ifname, FAR uint8_t *saddr)
{
struct ieee802154_get_req_s req;
int ret;
req.attr = IEEE802154_ATTR_MAC_SADDR;
ret = sixlowpan_get_req(sock, ifname, &req);
IEEE802154_SADDRCOPY(saddr, req.attrval.mac.saddr);
return ret;
}
int sixlowpan_getpanid(int sock, FAR const char *ifname, FAR uint8_t *panid)
{
struct ieee802154_get_req_s req;
int ret;
req.attr = IEEE802154_ATTR_MAC_PANID;
ret = sixlowpan_get_req(sock, ifname, &req);
IEEE802154_PANIDCOPY(panid, req.attrval.mac.panid);
return ret;
}
int sixlowpan_getcoordeaddr(int sock, FAR const char *ifname, FAR uint8_t *eaddr)
{
struct ieee802154_get_req_s req;
int ret;
req.attr = IEEE802154_ATTR_MAC_COORD_EADDR;
ret = sixlowpan_get_req(sock, ifname, &req);
IEEE802154_EADDRCOPY(eaddr, req.attrval.mac.eaddr);
return ret;
}
int sixlowpan_getcoordsaddr(int sock, FAR const char *ifname, FAR uint8_t *saddr)
{
struct ieee802154_get_req_s req;
int ret;
req.attr = IEEE802154_ATTR_MAC_COORD_SADDR;
ret = sixlowpan_get_req(sock, ifname, &req);
IEEE802154_SADDRCOPY(saddr, req.attrval.mac.saddr);
return ret;
}
int sixlowpan_getrxonidle(int sock, FAR const char *ifname, FAR bool *rxonidle)
{
struct ieee802154_get_req_s req;
int ret;
req.attr = IEEE802154_ATTR_MAC_RX_ON_WHEN_IDLE;
ret = sixlowpan_get_req(sock, ifname, &req);
*rxonidle = req.attrval.mac.rxonidle;
return ret;
}
int sixlowpan_getdevmode(int sock, FAR const char *ifname,
FAR enum ieee802154_devmode_e *devmode)
{
struct ieee802154_get_req_s req;
int ret;
req.attr = IEEE802154_ATTR_MAC_DEVMODE;
ret = sixlowpan_get_req(sock, ifname, &req);
*devmode = req.attrval.mac.devmode;
return ret;
}
int sixlowpan_getpromisc(int sock, FAR const char *ifname, FAR bool *promisc)
{
struct ieee802154_get_req_s req;
int ret;
req.attr = IEEE802154_ATTR_MAC_PROMISCUOUS_MODE;
ret = sixlowpan_get_req(sock, ifname, &req);
*promisc = req.attrval.mac.promisc_mode;
return ret;
}
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
int sixlowpan_gettxpwr(int sock, FAR const char *ifname, FAR int32_t *txpwr)
{
struct ieee802154_get_req_s req;
int ret;
req.attr = IEEE802154_ATTR_PHY_TX_POWER;
ret = sixlowpan_get_req(sock, ifname, &req);
*txpwr = req.attrval.phy.txpwr;
return ret;
}
int sixlowpan_getmaxretries(int sock, FAR const char *ifname, FAR uint8_t *retries)
{
struct ieee802154_get_req_s req;
int ret;
req.attr = IEEE802154_ATTR_MAC_MAX_FRAME_RETRIES;
ret = sixlowpan_get_req(sock, ifname, &req);
*retries = req.attrval.mac.max_retries;
return ret;
}
int sixlowpan_getfcslen(int sock, FAR const char *ifname, FAR uint8_t *fcslen)
{
struct ieee802154_get_req_s req;
int ret;
req.attr = IEEE802154_ATTR_PHY_FCS_LEN;
ret = sixlowpan_get_req(sock, ifname, &req);
*fcslen = req.attrval.phy.fcslen;
return ret;
}