nuttx-apps/wireless/ieee802154/libmac/sixlowpan_resetreq.c

60 lines
2.0 KiB
C
Raw Normal View History

/****************************************************************************
* apps/wireless/ieee802154/libmac/sixlowpan_resetreq.c
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/ioctl.h>
#include <stdint.h>
#include <stdio.h>
#include <string.h>
#include <errno.h>
#include <nuttx/fs/ioctl.h>
#include <nuttx/wireless/ieee802154/ieee802154_mac.h>
#include "wireless/ieee802154.h"
/****************************************************************************
* Public Functions
****************************************************************************/
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
int sixlowpan_reset_req(int sock, FAR const char *ifname, bool resetattr)
{
struct ieee802154_netmac_s arg;
int ret;
strlcpy(arg.ifr_name, ifname, IFNAMSIZ);
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
arg.u.resetreq.resetattr = resetattr;
ret = ioctl(sock, MAC802154IOC_MLME_RESET_REQUEST,
(unsigned long)((uintptr_t)&arg));
if (ret < 0)
{
ret = -errno;
fprintf(stderr, "MAC802154IOC_MLME_RESET_REQUEST failed: %d\n", ret);
}
return ret;
}