nuttx-apps/examples/tcpblaster/Kconfig

#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#

config EXAMPLES_TCPBLASTER
	bool "TCP Performance Test"
	default n
	depends on NET_TCP
	---help---
		Enable the network test example

if EXAMPLES_TCPBLASTER

config EXAMPLES_TCPBLASTER_SENDSIZE
	int "Payload size"
	default 4096
	---help---
		This setting determines size of each test packet sent to the server.

config EXAMPLES_TCPBLASTER_PROGNAME1
	string "Target1 program name"
	default "tcpserver" if !EXAMPLES_TCPBLASTER_SERVER
	default "tcpclient" if EXAMPLES_TCPBLASTER_SERVER
	depends on BUILD_KERNEL
	---help---
		This is the name of the program that will be use when the TcpBlaster
		program is installed for target1.

config EXAMPLES_TCPBLASTER_STACKSIZE1
	int "Target1 stack size"
	default 2048

config EXAMPLES_TCPBLASTER_PRIORITY1
	int "Target1 priority"
	default 100

config EXAMPLES_TCPBLASTER_LOOPBACK
	bool "Loopback test"
	default n
	depends on NET_LOOPBACK || IEEE802154_LOOPBACK || PKTRADIO_LOOPBACK
	---help---
		Perform the test using the local loopback device.  In this case,
		both the client and the server reside on the target.

# No server if loopback; No second target if loopback

if !EXAMPLES_TCPBLASTER_LOOPBACK

config EXAMPLES_TCPBLASTER_SERVER
	bool "Target1 is server"
	default n
	depends on !EXAMPLES_TCPBLASTER_LOOPBACK
	---help---
		Select to use the host as the client side of the test.  Default:  The
		target is the client side of the test

config EXAMPLES_TCPBLASTER_TARGET2
	bool "Second endpoint is a target"
	default n
	---help---
		By default, the host PC is configured as the second endpoint of the
		TCPBLASTER.  If this option is selected, then the second endpoint
		will be built into the FLASH image as well.  This means that you
		can use two target boards to run the test with no host PC
		involvement.

if EXAMPLES_TCPBLASTER_TARGET2

config EXAMPLES_TCPBLASTER_PROGNAME2
	string "Target2 program name"
	default "tcpserver" if !EXAMPLES_TCPBLASTER_SERVER
	default "tcpclient" if EXAMPLES_TCPBLASTER_SERVER
	depends on BUILD_KERNEL
	---help---
		This is the name of the Target2 program that will be use when the
		NSH ELF program is installed.

config EXAMPLES_TCPBLASTER_PRIORITY2
	int "Target2 task priority"
	default 100

config EXAMPLES_TCPBLASTER_STACKSIZE2
	int "Target2 stack size"
	default 2048

endif # EXAMPLES_TCPBLASTER_TARGET2
endif # !EXAMPLES_TCPBLASTER_LOOPBACK

if EXAMPLES_TCPBLASTER_LOOPBACK
config EXAMPLES_TCPBLASTER_DAEMON_STACKSIZE
	int "Server daemon stack size"
	default 2048

config EXAMPLES_TCPBLASTER_DAEMON_PRIORITY
	int "Server daemon priority"
	default 100
#endif

endif # EXAMPLES_TCPBLASTER_LOOPBACK

config EXAMPLES_TCPBLASTER_DEVNAME
	string "Network device"
	default "eth0"

choice
	prompt "IP Domain"
	default EXAMPLES_TCPBLASTER_IPv4 if NET_IPv4
	default EXAMPLES_TCPBLASTER_IPv6 if NET_IPv6 && !NET_IPv4

config EXAMPLES_TCPBLASTER_IPv4
	bool "IPv4"
	depends on NET_IPv4

config EXAMPLES_TCPBLASTER_IPv6
	bool "IPv6"
	depends on NET_IPv6

endchoice # IP Domain

# No hardware initialization if loopback

config EXAMPLES_TCPBLASTER_INIT
	bool "Initialize network"
	default n if NSH_BUILTIN_APPS
	default y if !NSH_BUILTIN_APPS
	depends on !BUILD_KERNEL && !EXAMPLES_TCPBLASTER_LOOPBACK
	---help---
		Include logic to initialize the network.  This should not be done if
		the network is already initialized when tcpblaster runs.  This is
		usually the case, for example, when tcpblaster is run as an NSH built-
		in task.

config EXAMPLES_TCPBLASTER_NOMAC
	bool "Use Canned MAC Address"
	default n
	depends on EXAMPLES_TCPBLASTER_INIT

if EXAMPLES_TCPBLASTER_IPv4

comment "IPv4 addresses"

if EXAMPLES_TCPBLASTER_INIT

config EXAMPLES_TCPBLASTER_IPADDR
	hex "Target IP address"
	default 0x0a000002

config EXAMPLES_TCPBLASTER_DRIPADDR
	hex "Default Router IP address (Gateway)"
	default 0x0a000001

config EXAMPLES_TCPBLASTER_NETMASK
	hex "Network Mask"
	default 0xffffff00

endif # EXAMPLES_TCPBLASTER_INIT

# No server if loopback

if !EXAMPLES_TCPBLASTER_LOOPBACK

config EXAMPLES_TCPBLASTER_SERVERIP
	hex "Server IP Address"
	default 0x0a000001 if !EXAMPLES_TCPBLASTER_SERVER
	default 0x0a000002 if EXAMPLES_TCPBLASTER_SERVER
	---help---
		IP address of the server.  If the target is the server, then
		EXAMPLES_TCPBLASTER_SERVERIP should be the same as
		EXAMPLES_TCPBLASTER_IPADDR (default).  If the target is the client,
		then the default value of EXAMPLES_TCPBLASTER_SERVERIP is set to the
		host PC IP address (possibly the gateway address,
		EXAMPLES_TCPBLASTER_DRIPADDR?).

endif # !EXAMPLES_TCPBLASTER_LOOPBACK
endif # EXAMPLES_TCPBLASTER_IPv4

if EXAMPLES_TCPBLASTER_IPv6
if !NET_ICMPv6_AUTOCONF

comment "Target IPv6 address"

if EXAMPLES_TCPBLASTER_INIT

config EXAMPLES_TCPBLASTER_IPv6ADDR_1
	hex "[0]"
	default 0xfc00
	range 0x0 0xffff
	---help---
		Target IPv6 address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the first of the 8-values.  The
		default for all eight values is fc00::2.

config EXAMPLES_TCPBLASTER_IPv6ADDR_2
	hex "[1]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Target IPv6 address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the second of the 8-values.  The
		default for all eight values is fc00::2.

config EXAMPLES_TCPBLASTER_IPv6ADDR_3
	hex "[2]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Target IPv6 address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the third of the 8-values.  The
		default for all eight values is fc00::2.

config EXAMPLES_TCPBLASTER_IPv6ADDR_4
	hex "[3]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Target IPv6 address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the fourth of the 8-values.  The
		default for all eight values is fc00::2.

config EXAMPLES_TCPBLASTER_IPv6ADDR_5
	hex "[4]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Target IPv6 address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the fifth of the 8-values.  The
		default for all eight values is fc00::2.

config EXAMPLES_TCPBLASTER_IPv6ADDR_6
	hex "[5]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Target IPv6 address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the sixth of the 8-values.  The
		default for all eight values is fc00::2.

config EXAMPLES_TCPBLASTER_IPv6ADDR_7
	hex "[6]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Target IPv6 address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the seventh of the 8-values.  The
		default for all eight values is fc00::2.

config EXAMPLES_TCPBLASTER_IPv6ADDR_8
	hex "[7]"
	default 0x0002
	range 0x0 0xffff
	---help---
		Target IPv6 address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the last of the 8-values.  The
		default for all eight values is fc00::2.

comment "Router IPv6 address"

config EXAMPLES_TCPBLASTER_DRIPv6ADDR_1
	hex "[0]"
	default 0xfc00
	range 0x0 0xffff
	---help---
		Default router IP address (aka, Gateway).  This is a 16-bit integer
		value in host order.  Each of the eight values forming the full IP
		address must be specified individually.  This is the first of the
		8-values.  The default for all eight values is fc00::1.

config EXAMPLES_TCPBLASTER_DRIPv6ADDR_2
	hex "[1]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Default router IP address (aka, Gateway).  This is a 16-bit integer
		value in host order.  Each of the eight values forming the full IP
		address must be specified individually.  This is the second of the
		8-values.  The default for all eight values is fc00::1.

config EXAMPLES_TCPBLASTER_DRIPv6ADDR_3
	hex "[2]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Default router IP address (aka, Gateway).  This is a 16-bit integer
		value in host order.  Each of the eight values forming the full IP
		address must be specified individually.  This is the third of the
		8-values.  The default for all eight values is fc00::1.

config EXAMPLES_TCPBLASTER_DRIPv6ADDR_4
	hex "[3]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Default router IP address (aka, Gateway).  This is a 16-bit integer
		value in host order.  Each of the eight values forming the full IP
		address must be specified individually.  This is the fourth of the
		8-values.  The default for all eight values is fc00::1.

config EXAMPLES_TCPBLASTER_DRIPv6ADDR_5
	hex "[4]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Default router IP address (aka, Gateway).  This is a 16-bit integer
		value in host order.  Each of the eight values forming the full IP
		address must be specified individually.  This is the fifth of the
		8-values.  The default for all eight values is fc00::1.

config EXAMPLES_TCPBLASTER_DRIPv6ADDR_6
	hex "[5]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Default router IP address (aka, Gateway).  This is a 16-bit integer
		value in host order.  Each of the eight values forming the full IP
		address must be specified individually.  This is the sixth of the
		8-values.  The default for all eight values is fc00::1.

config EXAMPLES_TCPBLASTER_DRIPv6ADDR_7
	hex "[6]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Default router IP address (aka, Gateway).  This is a 16-bit integer
		value in host order.  Each of the eight values forming the full IP
		address must be specified individually.  This is the seventh of the
		8-values.  The default for all eight values is fc00::1.

config EXAMPLES_TCPBLASTER_DRIPv6ADDR_8
	hex "[7]"
	default 0x0001
	range 0x0 0xffff
	---help---
		Default router IP address (aka, Gateway).  This is a 16-bit integer
		value in host order.  Each of the eight values forming the full IP
		address must be specified individually.  This is the last of the
		8-values.  The default for all eight values is fc00::1.

comment "IPv6 Network mask"

config EXAMPLES_TCPBLASTER_IPv6NETMASK_1
	hex "[0]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the first of the 8-values.  The default for
		all eight values is fe00::0.

config EXAMPLES_TCPBLASTER_IPv6NETMASK_2
	hex "[1]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the second of the 8-values.  The default for
		all eight values is fe00::0.

config EXAMPLES_TCPBLASTER_IPv6NETMASK_3
	hex "[2]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the third of the 8-values.  The default for
		all eight values is fe00::0.

config EXAMPLES_TCPBLASTER_IPv6NETMASK_4
	hex "[3]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the fourth of the 8-values.  The default for
		all eight values is fe00::0.

config EXAMPLES_TCPBLASTER_IPv6NETMASK_5
	hex "[4]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the fifth of the 8-values.  The default for
		all eight values is fe00::0.

config EXAMPLES_TCPBLASTER_IPv6NETMASK_6
	hex "[5]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the sixth of the 8-values.  The default for
		all eight values is fe00::0.

config EXAMPLES_TCPBLASTER_IPv6NETMASK_7
	hex "[6]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the seventh of the 8-values.  The default for
		all eight values is fe00::0.

config EXAMPLES_TCPBLASTER_IPv6NETMASK_8
	hex "[7]"
	default 0xff80
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the eighth of the 8-values.  The default for
		all eight values is fe00::0.

endif # NET_ICMPv6_AUTOCONF
endif # EXAMPLES_TCPBLASTER_INIT

# Addresses are well known if loopback is used.

if !EXAMPLES_TCPBLASTER_LOOPBACK || !NET_LOOPBACK

comment "Server IPv6 address"

config EXAMPLES_TCPBLASTER_SERVERIPv6ADDR_1
	hex "[0]"
	default 0xfc00
	range 0x0 0xffff
	---help---
		IP address of the server.  If the target is the server, then
		EXAMPLES_TCPBLASTER_SERVERIP should be the same as
		EXAMPLES_TCPBLASTER_IPADDR (default).  If the target is the cleint,
		then the default value of EXAMPLES_TCPBLASTER_SERVERIP is set to the
		host PC IP address (possibly the gateway address,
		EXAMPLES_TCPBLASTER_DRIPADDR?).

		This is a 16-bit integer value in host order. Each of the eight
		values forming the full IP address must be specified individually.
		This is the first of the 8-values.

config EXAMPLES_TCPBLASTER_SERVERIPv6ADDR_2
	hex "[1]"
	default 0x0000
	range 0x0 0xffff
	---help---
		IP address of the server.  If the target is the server, then
		EXAMPLES_TCPBLASTER_SERVERIP should be the same as
		EXAMPLES_TCPBLASTER_IPADDR (default).  If the target is the client,
		then the default value of EXAMPLES_TCPBLASTER_SERVERIP is set to the
		host PC IP address (possibly the gateway address,
		EXAMPLES_TCPBLASTER_DRIPADDR?).

		This is a 16-bit integer value in host order. Each of the eight
		values forming the full IP address must be specified individually.
		This is the second of the 8-values.

config EXAMPLES_TCPBLASTER_SERVERIPv6ADDR_3
	hex "[2]"
	default 0x0000
	range 0x0 0xffff
	---help---
		IP address of the server.  If the target is the server, then
		EXAMPLES_TCPBLASTER_SERVERIP should be the same as
		EXAMPLES_TCPBLASTER_IPADDR (default).  If the target is the client,
		then the default value of EXAMPLES_TCPBLASTER_SERVERIP is set to the
		host PC IP address (possibly the gateway address,
		EXAMPLES_TCPBLASTER_DRIPADDR?).

		This is a 16-bit integer value in host order. Each of the eight
		values forming the full IP address must be specified individually.
		This is the Third of the 8-values.

config EXAMPLES_TCPBLASTER_SERVERIPv6ADDR_4
	hex "[3]"
	default 0x0000
	range 0x0 0xffff
	---help---
		IP address of the server.  If the target is the server, then
		EXAMPLES_TCPBLASTER_SERVERIP should be the same as
		EXAMPLES_TCPBLASTER_IPADDR (default).  If the target is the client,
		then the default value of EXAMPLES_TCPBLASTER_SERVERIP is set to the
		host PC IP address (possibly the gateway address,
		EXAMPLES_TCPBLASTER_DRIPADDR?).

		This is a 16-bit integer value in host order. Each of the eight
		values forming the full IP address must be specified individually.
		This is the fourth of the 8-values.

config EXAMPLES_TCPBLASTER_SERVERIPv6ADDR_5
	hex "[4]"
	default 0x0000
	range 0x0 0xffff
	---help---
		IP address of the server.  If the target is the server, then
		EXAMPLES_TCPBLASTER_SERVERIP should be the same as
		EXAMPLES_TCPBLASTER_IPADDR (default).  If the target is the client,
		then the default value of EXAMPLES_TCPBLASTER_SERVERIP is set to the
		host PC IP address (possibly the gateway address,
		EXAMPLES_TCPBLASTER_DRIPADDR?).

		This is a 16-bit integer value in host order. Each of the eight
		values forming the full IP address must be specified individually.
		This is the fifth of the 8-values.

config EXAMPLES_TCPBLASTER_SERVERIPv6ADDR_6
	hex "[5]"
	default 0x0000
	range 0x0 0xffff
	---help---
		IP address of the server.  If the target is the server, then
		EXAMPLES_TCPBLASTER_SERVERIP should be the same as
		EXAMPLES_TCPBLASTER_IPADDR (default).  If the target is the client,
		then the default value of EXAMPLES_TCPBLASTER_SERVERIP is set to the
		host PC IP address (possibly the gateway address,
		EXAMPLES_TCPBLASTER_DRIPADDR?).

		This is a 16-bit integer value in host order. Each of the eight
		values forming the full IP address must be specified individually.
		This is the sixth of the 8-values.

config EXAMPLES_TCPBLASTER_SERVERIPv6ADDR_7
	hex "[6]"
	default 0x0000
	range 0x0 0xffff
	---help---
		IP address of the server.  If the target is the server, then
		EXAMPLES_TCPBLASTER_SERVERIP should be the same as
		EXAMPLES_TCPBLASTER_IPADDR (default).  If the target is the client,
		then the default value of EXAMPLES_TCPBLASTER_SERVERIP is set to the
		host PC IP address (possibly the gateway address,
		EXAMPLES_TCPBLASTER_DRIPADDR?).

		This is a 16-bit integer value in host order. Each of the eight
		values forming the full IP address must be specified individually.
		This is the seventh of the 8-values.

config EXAMPLES_TCPBLASTER_SERVERIPv6ADDR_8
	hex "[7]"
	default 0x0001 if !EXAMPLES_TCPBLASTER_SERVER
	default 0x0002 if EXAMPLES_TCPBLASTER_SERVER
	range 0x0 0xffff
	---help---
		IP address of the server.  If the target is the server, then
		EXAMPLES_TCPBLASTER_SERVERIP should be the same as
		EXAMPLES_TCPBLASTER_IPADDR (default).  If the target is the client,
		then the default value of EXAMPLES_TCPBLASTER_SERVERIP is set to the
		host PC IP address (possibly the gateway address,
		EXAMPLES_TCPBLASTER_DRIPADDR?).

		This is a 16-bit integer value in host order. Each of the eight
		values forming the full IP address must be specified individually.
		This is the last of the 8-values.

endif # !EXAMPLES_TCPBLASTER_LOOPBACK
endif # EXAMPLES_TCPBLASTER_IPv6

config EXAMPLES_TCPBLASTER_SERVER_PORTNO
	int "Server port number"
	default 5471

endif # EXAMPLES_TCPBLASTER