nuttx-apps/examples/hidkbd/hidkbd_main.c

/****************************************************************************
 * examples/hidkbd/hidkbd_main.c
 *
 *   Copyright (C) 2011, 2013-2014 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <gnutt@nuttx.org>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name Gregory Nutt nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>

#include <sys/types.h>
#include <sys/stat.h>

#include <stdio.h>
#include <unistd.h>
#include <fcntl.h>
#include <sched.h>
#include <string.h>
#include <ctype.h>
#include <assert.h>
#include <errno.h>

#include <nuttx/usb/usbhost.h>

#ifdef CONFIG_EXAMPLES_HIDKBD_ENCODED
#  include <nuttx/streams.h>
#  include <nuttx/input/kbd_codec.h>
#endif

/****************************************************************************
 * Pre-processor Definitions
 ****************************************************************************/
/* Configuration ************************************************************/

/* Sanity checking */

#ifndef CONFIG_USBHOST
#  error "CONFIG_USBHOST is not defined"
#endif

#ifdef CONFIG_USBHOST_INT_DISABLE
#  error "Interrupt endpoints are disabled (CONFIG_USBHOST_INT_DISABLE)"
#endif

#ifndef CONFIG_NFILE_DESCRIPTORS
#  error "CONFIG_NFILE_DESCRIPTORS > 0 needed"
#endif

/* Provide some default values for other configuration settings */

#ifndef CONFIG_EXAMPLES_HIDKBD_DEFPRIO
#  define CONFIG_EXAMPLES_HIDKBD_DEFPRIO 50
#endif

#ifndef CONFIG_EXAMPLES_HIDKBD_STACKSIZE
#  define CONFIG_EXAMPLES_HIDKBD_STACKSIZE 1024
#endif

#ifndef CONFIG_EXAMPLES_HIDKBD_DEVNAME
#  define CONFIG_EXAMPLES_HIDKBD_DEVNAME "/dev/kbda"
#endif

#if !defined(CONFIG_HIDKBD_ENCODED) || !defined(CONFIG_LIB_KBDCODEC)
#  undef CONFIG_EXAMPLES_HIDKBD_ENCODED
#endif

/****************************************************************************
 * Private Types
 ****************************************************************************/

#ifdef CONFIG_EXAMPLES_HIDKBD_ENCODED
struct hidbkd_instream_s
{
  struct lib_instream_s stream;
  FAR char *buffer;
  ssize_t nbytes;
};
#endif

/****************************************************************************
 * Private Data
 ****************************************************************************/

static FAR struct usbhost_connection_s *g_usbconn;

/****************************************************************************
 * Public Function Prototypes
 ****************************************************************************/
/* The platform-specific code must provide a wrapper called
 * arch_usbhost_initialize() that will perform the actual USB host
 * initialization.
 */

FAR struct usbhost_connection_s *arch_usbhost_initialize(void);

/****************************************************************************
 * Private Functions
 ****************************************************************************/

/****************************************************************************
 * Name: hidkbd_getstream
 *
 * Description:
 *   Get one character from the keyboard.
 *
 ****************************************************************************/

#ifdef CONFIG_EXAMPLES_HIDKBD_ENCODED
static int hidkbd_getstream(FAR struct lib_instream_s *this)
{
  FAR struct hidbkd_instream_s *kbdstream = (FAR struct hidbkd_instream_s *)this;

  DEBUGASSERT(kbdstream && kbdstream->buffer);
  if (kbdstream->nbytes > 0)
    {
      kbdstream->nbytes--;
      kbdstream->stream.nget++;
      return (int)*kbdstream->buffer++;
    }

  return EOF;
}
#endif

/****************************************************************************
 * Name: hidkbd_decode
 *
 * Description:
 *   Decode encoded keyboard input
 *
 ****************************************************************************/

#ifdef CONFIG_EXAMPLES_HIDKBD_ENCODED
static void hidkbd_decode(FAR char *buffer, ssize_t nbytes)
{
  struct hidbkd_instream_s kbdstream;
  struct kbd_getstate_s state;
  uint8_t ch;
  int ret;

  /* Initialize */

  memset(&state, 0, sizeof(struct kbd_getstate_s));
  kbdstream.stream.get  = hidkbd_getstream;
  kbdstream.stream.nget = 0;
  kbdstream.buffer      = buffer;
  kbdstream.nbytes      = nbytes;

  /* Loop until all of the bytes have been consumed.  We implicitly assume
   * that the the escaped sequences do not cross buffer boundaries.  That
   * might be true if the read buffer were small or the data rates high.
   */

  for (;;)
    {
      /* Decode the next thing from the buffer */

      ret = kbd_decode((FAR struct lib_instream_s *)&kbdstream, &state, &ch);
      if (ret == KBD_ERROR) /* Error or end-of-file */
        {
          /* Break out when all of the data has been processed */

          break;
        }

      /* Normal data?  Or special key?  Press?  Or release? */

      switch (ret)
        {
        case KBD_PRESS: /* Key press event */
          printf("Normal Press:    %c [%02x]\n", isprint(ch) ? ch : '.', ch);
          break;

        case KBD_RELEASE: /* Key release event */
          printf("Normal Release:  %c [%02x]\n", isprint(ch) ? ch : '.', ch);
          break;

        case KBD_SPECPRESS: /* Special key press event */
          printf("Special Press:   %d\n", ch);
          break;

        case KBD_SPECREL: /* Special key release event */
          printf("Special Release: %d\n", ch);
          break;

        case KBD_ERROR: /* Error or end-of-file, already handled */
        default:
          printf("Unexpected:      %d\n", ret);
          break;
        }
    }
}
#endif

/****************************************************************************
 * Name: hidkbd_waiter
 *
 * Description:
 *   Wait for USB devices to be connected.
 *
 ****************************************************************************/

static int hidkbd_waiter(int argc, char *argv[])
{
  bool connected = false;
  int rhpndx;

  printf("hidkbd_waiter: Running\n");
  for (;;)
    {
      /* Wait for the device to change state.
       *
       * REVISIT:  This will not handle USB implementations (such as the the
       * SAMA5) which have multiple downstream, root hub ports.  In such cases,
       * connected must be an array with dimension equal to the number of root
       * hub ports.
       */

      rhpndx = CONN_WAIT(g_usbconn, &connected);
      DEBUGASSERT(rhpndx == OK);

      connected = !connected;
      printf("hidkbd_waiter: %s\n", connected ? "connected" : "disconnected");

      /* Did we just become connected? */

      if (connected)
        {
          /* Yes.. enumerate the newly connected device */

          (void)CONN_ENUMERATE(g_usbconn, rhpndx);
        }
    }

  /* Keep the compiler from complaining */

  return 0;
}

/****************************************************************************
 * Public Functions
 ****************************************************************************/

/****************************************************************************
 * Name: hidkbd_main
 ****************************************************************************/

#ifdef CONFIG_BUILD_KERNEL
int main(int argc, FAR char *argv[])
#else
int hidkbd_main(int argc, char *argv[])
#endif
{
  char buffer[256];
  pid_t pid;
  ssize_t nbytes;
  int fd;
  int ret;

  /* First, register all of the USB host HID keyboard class driver */

  printf("hidkbd_main: Register class drivers\n");
  ret = usbhost_kbdinit();
  if (ret != OK)
    {
      printf("hidkbd_main: Failed to register the KBD class\n");
    }

  /* Then get an instance of the USB host interface.  The platform-specific
   * code must provide a wrapper called arch_usbhost_initialize() that will
   * perform the actual USB host initialization.
   */

  printf("hidkbd_main: Initialize USB host keyboard driver\n");
  g_usbconn = arch_usbhost_initialize();
  if (g_usbconn)
    {
      /* Start a thread to handle device connection. */

      printf("hidkbd_main: Start hidkbd_waiter\n");

      pid = task_create("usbhost", CONFIG_EXAMPLES_HIDKBD_DEFPRIO,
                        CONFIG_EXAMPLES_HIDKBD_STACKSIZE,
                        (main_t)hidkbd_waiter, (FAR char * const *)NULL);
      UNUSED(pid);

      /* Now just sleep.  Eventually logic here will open the kbd device and
       * perform the HID keyboard test.
       */

      for (;;)
        {
          /* Open the keyboard device.  Loop until the device is successfully
           * opened.
           */

          do
            {
              printf("Opening device %s\n", CONFIG_EXAMPLES_HIDKBD_DEVNAME);
              fd = open(CONFIG_EXAMPLES_HIDKBD_DEVNAME, O_RDONLY);
              if (fd < 0)
                {
                   printf("Failed: %d\n", errno);
                   fflush(stdout);
                   sleep(3);
                }
            }
          while (fd < 0);

          printf("Device %s opened\n", CONFIG_EXAMPLES_HIDKBD_DEVNAME);
          fflush(stdout);

          /* Loop until there is a read failure (or EOF?) */

          do
            {
              /* Read a buffer of data */

              nbytes = read(fd, buffer, 256);
              if (nbytes > 0)
                {
                  /* On success, echo the buffer to stdout */

#ifdef CONFIG_EXAMPLES_HIDKBD_ENCODED
                  hidkbd_decode(buffer, nbytes);
#else
                  (void)write(1, buffer, nbytes);
#endif
                }
            }
          while (nbytes > 0);

          printf("Closing device %s: %d\n", CONFIG_EXAMPLES_HIDKBD_DEVNAME, (int)nbytes);
          fflush(stdout);
          close(fd);
        }
    }

  return 0;
}