nuttx-apps/wireless/ieee802154/i8sak/i8sak_events.c

410 lines
13 KiB
C
Raw Normal View History

Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
/****************************************************************************
* apps/wireless/ieee802154/i8sak/i8sak_events.c
* IEEE 802.15.4 Swiss Army Knife
*
* Copyright (C) 2017 Verge Inc. All rights reserved.
* Author: Anthony Merlino <anthony@vergeaero.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/ioctl.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <errno.h>
#include <fcntl.h>
#include <net/if.h>
#include <nuttx/fs/ioctl.h>
#include <nuttx/wireless/ieee802154/ieee802154_mac.h>
#include "wireless/ieee802154.h"
#include "i8sak.h"
#include "i8sak_events.h"
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name : i8sak_eventthread
*
* Description :
* Listen for events from the MAC layer
****************************************************************************/
static pthread_addr_t i8sak_eventthread(pthread_addr_t arg)
{
FAR struct i8sak_s *i8sak = (FAR struct i8sak_s *)arg;
union ieee802154_macarg_u macarg;
#ifdef CONFIG_NET_6LOWPAN
struct ieee802154_netmac_s netarg;
#endif
FAR struct i8sak_eventreceiver_s *receiver;
FAR struct ieee802154_primitive_s *primitive = NULL;
int ret = OK;
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
if (i8sak->mode == I8SAK_MODE_CHAR)
{
macarg.enable = true;
ioctl(i8sak->fd, MAC802154IOC_ENABLE_EVENTS,
(unsigned long)((uintptr_t)&macarg));
}
#ifdef CONFIG_NET_6LOWPAN
else if (i8sak->mode == I8SAK_MODE_NETIF)
{
netarg.u.enable = true;
strncpy(netarg.ifr_name, i8sak->ifname, IFNAMSIZ);
ioctl(i8sak->fd, MAC802154IOC_ENABLE_EVENTS,
(unsigned long)((uintptr_t)&netarg));
}
#endif
while (i8sak->eventlistener_run)
{
if (i8sak->mode == I8SAK_MODE_CHAR)
{
ret = ioctl(i8sak->fd, MAC802154IOC_GET_EVENT,
(unsigned long)((uintptr_t)&macarg));
primitive = &macarg.primitive;
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
}
#ifdef CONFIG_NET_6LOWPAN
else if (i8sak->mode == I8SAK_MODE_NETIF)
{
ret = ioctl(i8sak->fd, MAC802154IOC_GET_EVENT,
(unsigned long)((uintptr_t)&netarg));
primitive = &netarg.u.primitive;
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
}
#endif
if (ret != OK)
{
i8sak->eventlistener_run = false;
continue;
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
}
ret = sem_wait(&i8sak->eventsem);
if (ret != OK)
{
i8sak->eventlistener_run = false;
continue;
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
}
/* Loop through event receivers and call callbacks for those receivers
* listening for this event type.
*/
receiver = (FAR struct i8sak_eventreceiver_s *)sq_peek(
&i8sak->eventreceivers);
while (receiver != NULL)
{
if ((primitive->type == IEEE802154_PRIMITIVE_CONF_DATA &&
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
receiver->filter.confevents.data) ||
(primitive->type == IEEE802154_PRIMITIVE_CONF_ASSOC &&
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
receiver->filter.confevents.assoc) ||
(primitive->type == IEEE802154_PRIMITIVE_CONF_DISASSOC &&
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
receiver->filter.confevents.disassoc) ||
(primitive->type == IEEE802154_PRIMITIVE_CONF_GTS &&
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
receiver->filter.confevents.gts) ||
(primitive->type == IEEE802154_PRIMITIVE_CONF_RESET &&
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
receiver->filter.confevents.reset) ||
(primitive->type == IEEE802154_PRIMITIVE_CONF_RXENABLE &&
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
receiver->filter.confevents.rxenable) ||
(primitive->type == IEEE802154_PRIMITIVE_CONF_SCAN &&
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
receiver->filter.confevents.scan) ||
(primitive->type == IEEE802154_PRIMITIVE_CONF_START &&
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
receiver->filter.confevents.start) ||
(primitive->type == IEEE802154_PRIMITIVE_CONF_POLL &&
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
receiver->filter.confevents.poll) ||
(primitive->type == IEEE802154_PRIMITIVE_IND_ASSOC &&
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
receiver->filter.indevents.assoc) ||
(primitive->type == IEEE802154_PRIMITIVE_IND_DISASSOC &&
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
receiver->filter.indevents.disassoc) ||
(primitive->type == IEEE802154_PRIMITIVE_IND_BEACONNOTIFY &&
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
receiver->filter.indevents.beacon) ||
(primitive->type == IEEE802154_PRIMITIVE_IND_GTS &&
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
receiver->filter.indevents.gts) ||
(primitive->type == IEEE802154_PRIMITIVE_IND_ORPHAN &&
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
receiver->filter.indevents.orphan) ||
(primitive->type == IEEE802154_PRIMITIVE_IND_COMMSTATUS &&
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
receiver->filter.indevents.commstatus) ||
(primitive->type == IEEE802154_PRIMITIVE_IND_SYNCLOSS &&
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
receiver->filter.indevents.syncloss))
{
receiver->cb(primitive, receiver->arg);
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
if (receiver->oneshot)
{
/* Unlink the receiver from the list */
sq_rem((FAR sq_entry_t *)receiver, &i8sak->eventreceivers);
/* Link the receiver back into the free list */
sq_addlast((FAR sq_entry_t *)receiver, &i8sak->eventreceivers_free);
}
}
receiver = (FAR struct i8sak_eventreceiver_s *)sq_next(
(FAR sq_entry_t *)receiver);
}
sem_post(&i8sak->eventsem);
}
if (i8sak->mode == I8SAK_MODE_CHAR)
{
macarg.enable = false;
ioctl(i8sak->fd, MAC802154IOC_ENABLE_EVENTS,
(unsigned long)((uintptr_t)&macarg));
}
#ifdef CONFIG_NET_6LOWPAN
else if (i8sak->mode == I8SAK_MODE_NETIF)
{
netarg.u.enable = false;
strncpy(netarg.ifr_name, i8sak->ifname, IFNAMSIZ);
ioctl(i8sak->fd, MAC802154IOC_ENABLE_EVENTS,
(unsigned long)((uintptr_t)&netarg));
}
#endif
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
return NULL;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: i8sak_eventlistener_start
*
* Description:
* Starts internal threads to listen for events.
*
* Parameters:
* i8sak - handle to the i8sak instance struct
*
* Returned Value:
* OK on success; a negated errno on failure
*
* Assumptions:
*
****************************************************************************/
int i8sak_eventlistener_start(FAR struct i8sak_s *i8sak)
{
int ret;
i8sak->eventlistener_run = true;
ret = pthread_create(&i8sak->eventlistener_threadid, NULL, i8sak_eventthread,
(void *)i8sak);
if (ret != 0)
{
fprintf(stderr, "failed to start event thread: %d\n", ret);
return ret;
}
return OK;
}
/****************************************************************************
* Name: i8sak_eventlistener_stop
*
* Description:
* Stops event thread.
*
* Parameters:
* handle - handle to the i8sak instance struct
*
* Returned Value:
* OK on success; a negated errno on failure
*
* Assumptions:
*
****************************************************************************/
int i8sak_eventlistener_stop(FAR struct i8sak_s *i8sak)
{
int ret;
FAR void *value;
i8sak->eventlistener_run = false;
pthread_kill(i8sak->eventlistener_threadid, 2);
ret = pthread_join(i8sak->eventlistener_threadid, &value);
if (ret != OK)
{
fprintf(stderr, "ERROR: pthread_join() failed: %d\n", ret);
}
return ret;
Squashed commit of the following: Merged in merlin17/apps/i8sak-sock (pull request #108) i8sak: Fixes mistake where socket was accidentally bound to endpoint address i8sak: Fixes bad logic that bound outbound port to the destination address i8sak: Adds sniffer port option and a few other get/set parameters Merged in merlin17/apps/i8sak-sock (pull request #106) i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout Merged in merlin17/apps/i8sak-sock (pull request #104) i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works Merged in merlin17/apps/i8sak-sock (pull request #103) wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer * wireless/ieee802154: Removes useless wpanlistener folder with build files * wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality * wireless/ieee802154/i8sak: Starts adding support for both character driver and socket * Removes unneccessary Kconfig statement * ieee802154: Adds function prototypes missed on previous commit * wireless/ieee802154/libmac: Fixes sixlowpan_resetreq * wireless/ieee802154/libmac: Small fixes and removes enableevents helper * apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly * apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now. * wireless/ieee802154/i8sak: Non-functional clean-up. * i8sak: Removes chan and coordinfo commands and introduces generic get/set commands * i8sak: startpan now requires PAN ID argument * i8sak: Adds ability to set endpoint address using set command * i8sak: Minor fixes and cleanup * i8sak: Adds addrmode setting to i8sak. exposed via get/set calls * i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting. * i8sak: Trivial * i8sak: Adds get/set hook for endpoint address mode (destination address mode) * i8sak: Changes default address modes to short. * i8sak: Fixes build erros associated with enabling 6LoWPAN support * i8sak: Adds socket version of get/set implementation. Simplifies some logic as well. * wireless/ieee802154/i8sak: Removes unused files * wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument. Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-15 16:16:47 +02:00
}
/****************************************************************************
* Name: i8sak_eventlistener_addreceiver
*
* Description:
* Add an event receiver. An event receiver consists of a callback and flags
* for which events should be sent to the callback.
*
* Parameters:
* handle - handle to the i8sak instance struct
* cb - callback to be called on reception of notification event from
* MAC layer that matches one of the masked events
* filter - struct containing event mask bits to indicate whether event
* type should trigger callback
* arg - user specified argument to send to the callback
* oneshot - whether the receiver is automatically unregistered after the
* first notification
*
* Returned Value:
* OK if successful; a negated errno on failure
*
* Assumptions:
*
****************************************************************************/
int i8sak_eventlistener_addreceiver(FAR struct i8sak_s *i8sak,
i8sak_eventcallback_t cb,
FAR struct i8sak_eventfilter_s *filter,
bool oneshot)
{
FAR struct i8sak_eventreceiver_s *receiver;
int ret;
ret = sem_wait(&i8sak->eventsem);
if (ret != OK)
{
fprintf(stderr, "failed to get exclusive access: %d\n", ret);
return ret;
}
/* Allocate a receiver struct from the static pool */
receiver = (FAR struct i8sak_eventreceiver_s *)sq_remfirst(
&i8sak->eventreceivers_free);
if (receiver == NULL)
{
fprintf(stderr, "failed to add receiver: %d\n", ENOMEM);
sem_post(&i8sak->eventsem);
return -ENOMEM;
}
receiver->cb = cb;
memcpy(&receiver->filter, filter, sizeof(struct i8sak_eventfilter_s));
receiver->arg = i8sak;
receiver->oneshot = oneshot;
/* Link the receiver into the list */
sq_addlast((FAR sq_entry_t *)receiver, &i8sak->eventreceivers);
sem_post(&i8sak->eventsem);
return OK;
}
/****************************************************************************
* Name: i8sak_eventlistener_removereceiver
*
* Description:
* Removes a event receiver. Listener will no longer call callback. This
* function finds the first event receiver with the provided callback.
*
* Parameters:
* handle - handle to the i8sak instance struct
* cb - callback function to search for.
*
* Returned Value:
* OK on success; a negated errno on failure
*
* Assumptions:
*
****************************************************************************/
int i8sak_eventlistener_removereceiver(FAR struct i8sak_s *i8sak,
i8sak_eventcallback_t cb)
{
FAR struct i8sak_eventreceiver_s *receiver;
int ret;
ret = sem_wait(&i8sak->eventsem);
if (ret != OK)
{
fprintf(stderr, "failed to get exlusive access: %d\n", ret);
return ret;
}
/* Search through frame receivers until either we match the callback, or
* there is no more receivers to check.
*/
receiver = (FAR struct i8sak_eventreceiver_s *)sq_peek(
&i8sak->eventreceivers);
while (receiver != NULL)
{
/* Check if callback matches */
if (receiver->cb == cb)
{
/* Unlink the receiver from the list */
sq_rem((FAR sq_entry_t *)receiver, &i8sak->eventreceivers);
/* Link the receiver back into the free list */
sq_addlast((FAR sq_entry_t *)receiver, &i8sak->eventreceivers_free);
sem_post(&i8sak->eventsem);
return OK;
}
receiver = (FAR struct i8sak_eventreceiver_s *)sq_next(
(FAR sq_entry_t *)receiver);
}
sem_post(&i8sak->eventsem);
fprintf(stderr, "failed to remove receiver");
return ERROR;
}