nuttx-apps/Application.mk

156 lines
4.2 KiB
Makefile
Raw Normal View History

############################################################################
# apps/Application.mk
#
# Copyright (C) 2015 Gregory Nutt. All rights reserved.
# Copyright (C) 2015 Omni Hoverboards Inc. All rights reserved.
# Authors: Gregory Nutt <gnutt@nuttx.org>
# Paul Alexander Patience <paul-a.patience@polymtl.ca>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include $(APPDIR)/Make.defs
2015-09-23 11:09:29 -04:00
CXXEXT ?= .cxx
AOBJS = $(ASRCS:.S=$(OBJEXT))
COBJS = $(CSRCS:.c=$(OBJEXT))
2015-09-23 11:09:29 -04:00
CXXOBJS = $(CXXSRCS:$(CXXEXT)=$(OBJEXT))
2015-09-30 12:06:28 -04:00
ifeq ($(suffix $(MAINSRC)),$(CXXEXT))
MAINOBJ = $(MAINSRC:$(CXXEXT)=$(OBJEXT))
else
MAINOBJ = $(MAINSRC:.c=$(OBJEXT))
endif
SRCS = $(ASRCS) $(CSRCS) $(CXXSRCS) $(MAINSRC)
2015-09-23 11:09:29 -04:00
OBJS = $(AOBJS) $(COBJS) $(CXXOBJS)
ifneq ($(CONFIG_BUILD_KERNEL),y)
OBJS += $(MAINOBJ)
endif
ifeq ($(WINTOOL),y)
BIN = "${shell cygpath -w $(APPDIR)$(DELIM)libapps$(LIBEXT)}"
INSTALL_DIR = "${shell cygpath -w $(BIN_DIR)}"
else
BIN = $(APPDIR)$(DELIM)libapps$(LIBEXT)
INSTALL_DIR = $(BIN_DIR)
endif
ROOTDEPPATH = --dep-path .
VPATH =
all: .built
2016-06-02 16:34:00 +02:00
.PHONY: clean preconfig depend distclean
.PRECIOUS: $(APPDIR)/libapps$(LIBEXT)
$(AOBJS): %$(OBJEXT): %.S
$(call ASSEMBLE, $<, $@)
2015-09-30 12:06:28 -04:00
$(COBJS): %$(OBJEXT): %.c
$(call COMPILE, $<, $@)
2015-09-23 11:09:29 -04:00
$(CXXOBJS): %$(OBJEXT): %$(CXXEXT)
$(call COMPILEXX, $<, $@)
2015-09-30 12:06:28 -04:00
ifeq ($(suffix $(MAINSRC)),$(CXXEXT))
$(MAINOBJ): %$(OBJEXT): %$(CXXEXT)
$(call COMPILEXX, $<, $@)
else
$(MAINOBJ): %$(OBJEXT): %.c
$(call COMPILE, $<, $@)
endif
Squashed commit of the following: Merged in masayuki2009/nuttx.apps/loadable_app (pull request #148) loadable app support * apps: Introduce a build system for loadable apps for nsh. This PR consits of following changes. (NOTE: Changes to each application will be provided separately) apps/nshlib/Kconfig: Add 'option modules' to NSH_FILE_APPS so that a user can change an application configuration to tristate (y/n/m) apps/Make.defs: Override COMPILE and COMPILEXX macros to compile loadable apps. To make loadable apps, -DLOADABLE_APP is added to the flags. Also, introduce ELFLD to link a lodable app. Please note that the variable 'LOADABLE' must be defined in each application Makefile if you want to make a loadable app. apps/Application.mk: Add .build target in case of 'LOADABLE=y' which is used to link a final loadable application and install the app to apps/bin. apps/Makefile: Add SYMTABSRC and SYMTABOBJ variables for loadable apps which will be generated under the apps directory. Add make_symbols target which will be called when all applications are installed to generate symtab_app.c which is used for nsh to inform symbol information to the NuttX kernel. Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com> * apps/examples/hello: Apply changes to support a lodable app. Kconfig: Change the application state from bool to tristate Make.defs: Change the condition to build. By default, the application is not selected (i.e. 'n'), so if other states (i.e. y/m) are selected, the application will be compiled. Makefile: If the application is specified to 'm', the variable 'LOADABLE' must be defined here. Also note that other variables (PRIORITY and STACKSIZE) can only be used for built-in apps. hello_main.c Add LOADABLE_APP condition to main(). Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com> * apps/examples/helloxx: Apply changes to support a lodable app. Kconfig: Change the application state from bool to tristate Make.defs: Change the condition to build. By default, the application is not selected (i.e. 'n'), so if other states (i.e. y/m) are selected, the application will be compiled. Makefile: If the application is specified to 'm', the variable 'LOADABLE' must be defined here. Also note that other variables (PRIORITY and STACKSIZE) can only be used for built-in apps. helloxx_main.c Add LOADABLE_APP condition to main(). Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com> Approved-by: GregoryN <gnutt@nuttx.org>
2018-08-03 12:05:01 -06:00
ifeq ($(LOADABLE),y)
.built: $(OBJS)
$(call ELFLD, $(APPNAME)_main, $(OBJS), $(APPNAME))
$(Q) mkdir -p $(BIN_DIR)
$(Q) install $(APPNAME) $(BIN_DIR)$(DELIM)$(APPNAME)
else
.built: $(OBJS)
$(call ARCHIVE, $(BIN), $(OBJS))
2016-05-12 14:17:40 -04:00
$(Q) touch $@
Squashed commit of the following: Merged in masayuki2009/nuttx.apps/loadable_app (pull request #148) loadable app support * apps: Introduce a build system for loadable apps for nsh. This PR consits of following changes. (NOTE: Changes to each application will be provided separately) apps/nshlib/Kconfig: Add 'option modules' to NSH_FILE_APPS so that a user can change an application configuration to tristate (y/n/m) apps/Make.defs: Override COMPILE and COMPILEXX macros to compile loadable apps. To make loadable apps, -DLOADABLE_APP is added to the flags. Also, introduce ELFLD to link a lodable app. Please note that the variable 'LOADABLE' must be defined in each application Makefile if you want to make a loadable app. apps/Application.mk: Add .build target in case of 'LOADABLE=y' which is used to link a final loadable application and install the app to apps/bin. apps/Makefile: Add SYMTABSRC and SYMTABOBJ variables for loadable apps which will be generated under the apps directory. Add make_symbols target which will be called when all applications are installed to generate symtab_app.c which is used for nsh to inform symbol information to the NuttX kernel. Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com> * apps/examples/hello: Apply changes to support a lodable app. Kconfig: Change the application state from bool to tristate Make.defs: Change the condition to build. By default, the application is not selected (i.e. 'n'), so if other states (i.e. y/m) are selected, the application will be compiled. Makefile: If the application is specified to 'm', the variable 'LOADABLE' must be defined here. Also note that other variables (PRIORITY and STACKSIZE) can only be used for built-in apps. hello_main.c Add LOADABLE_APP condition to main(). Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com> * apps/examples/helloxx: Apply changes to support a lodable app. Kconfig: Change the application state from bool to tristate Make.defs: Change the condition to build. By default, the application is not selected (i.e. 'n'), so if other states (i.e. y/m) are selected, the application will be compiled. Makefile: If the application is specified to 'm', the variable 'LOADABLE' must be defined here. Also note that other variables (PRIORITY and STACKSIZE) can only be used for built-in apps. helloxx_main.c Add LOADABLE_APP condition to main(). Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com> Approved-by: GregoryN <gnutt@nuttx.org>
2018-08-03 12:05:01 -06:00
endif
ifeq ($(CONFIG_BUILD_KERNEL),y)
$(BIN_DIR)$(DELIM)$(PROGNAME): $(OBJS) $(MAINOBJ)
@echo "LD: $(PROGNAME)"
$(Q) $(LD) $(LDELFFLAGS) $(LDLIBPATH) -o $(INSTALL_DIR)$(DELIM)$(PROGNAME) $(ARCHCRT0OBJ) $(MAINOBJ) $(LDLIBS)
2016-05-12 14:17:40 -04:00
$(Q) $(NM) -u $(INSTALL_DIR)$(DELIM)$(PROGNAME)
install: $(BIN_DIR)$(DELIM)$(PROGNAME)
else
install:
endif
2016-06-02 16:34:00 +02:00
preconfig:
ifeq ($(CONFIG_NSH_BUILTIN_APPS),y)
ifneq ($(APPNAME),)
ifneq ($(PRIORITY),)
ifneq ($(STACKSIZE),)
$(BUILTIN_REGISTRY)$(DELIM)$(APPNAME)_main.bdat: $(DEPCONFIG) Makefile
$(call REGISTER,$(APPNAME),$(PRIORITY),$(STACKSIZE),$(APPNAME)_main)
context: $(BUILTIN_REGISTRY)$(DELIM)$(APPNAME)_main.bdat
else
context:
endif
else
context:
endif
else
context:
endif
else
context:
endif
2015-09-30 12:06:28 -04:00
.depend: Makefile $(SRCS)
ifeq ($(filter %$(CXXEXT),$(SRCS)),)
$(Q) $(MKDEP) $(ROOTDEPPATH) "$(CC)" -- $(CFLAGS) -- $(SRCS) >Make.dep
2015-09-30 12:06:28 -04:00
else
$(Q) $(MKDEP) $(ROOTDEPPATH) "$(CXX)" -- $(CXXFLAGS) -- $(SRCS) >Make.dep
endif
$(Q) touch $@
depend: .depend
clean:
$(call DELFILE, .built)
$(call CLEAN)
distclean: clean
$(call DELFILE, Make.dep)
$(call DELFILE, .depend)
-include Make.dep