nuttx-apps/netutils/thttpd/Kconfig

#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#

config NETUTILS_THTTPD
	bool "THTTPD webserver"
	default n
	depends on NXFLAT || FS_BINFS
	---help---
		Enable support for the THTTPD webservert.

if NETUTILS_THTTPD

config THTTPD_NFILE_DESCRIPTORS
	int "the maximum number of file descriptors for thttpd webserver"
	default 16
	---help---
	        The maximum number of file descriptors for thttpd webserver

config THTTPD_PORT
	int "THTTPD port number"
	default 80
	---help---
		THTTPD Server port number.  Default: 80

config THTTPD_IPADDR
	hex "THTTPD IP address"
	default 0x0a000002
	---help---
		Server IP address (no host name).  Default: 0x0a000002

		This is a 32-bit integer value in host order.  So, as an example,
		the default value of 0x0a000002 would correspond to 10.0.0.2.

config THTTPD_SERVER_ADDRESS
	string "Reported server URL"
	default "http://www.nuttx.org"
	---help---
		SERVER_ADDRESS: response, Default: "http://www.nuttx.org"

config THTTPD_SERVER_SOFTWARE
	string "Reported server software string"
	default "thttpd/2.25b 29dec2003-NuttX"
	---help---
		SERVER_SOFTWARE: response, Default: "thttpd/2.25b 29dec2003-NuttX"

choice
	prompt "CGI file system"
	default THTTPD_NXFLAT if NXFLAT && !FS_BINFS
	default THTTPD_BINFS if !NXFLAT && FS_BINFS

config THTTPD_NXFLAT
	bool "NXFLAT"
	depends on NXFLAT

config THTTPD_BINFS
	bool "binfs"
	depends on FS_BINFS

endchoice

config THTTPD_PATH
	string "Path to the server content"
	default "/mnt/www"
	---help---
		Server working directory.  Default: "/mnt/www"

config THTTPD_CGI_PATH
	string "Path to CGI content"
	default "/mnt/www/cgi-bin"
	---help---
		Path to CGI executables.  Default: "/mnt/www/cgi-bin"

config THTTPD_CGI_PATTERN
	string "CGI match pattern"
	default "/mnt/www/cgi-bin/*"
	---help---
		Only CGI programs matching this pattern will be executed.  In
		fact, if this value is not defined then no CGI logic will be built.
		Default: "/mnt/www/cgi-bin/*"

config THTTPD_CGI_PRIORITY
	int "CGI child priority"
	default 100
	---help---
		Provides the priority of CGI child tasks.  Default: 50

config THTTPD_CGI_STACKSIZE
	int "CGI child stack size"
	default DEFAULT_TASK_STACKSIZE
	---help---
		Provides the default stack size of CGI child task (will be overridden
		by the stack size in the NXFLAT header)

config THTTPD_CGI_BYTECOUNT
	int "Byte output limit"
	default 200000
	---help---
		Byte output limit for CGI tasks.  Default: 200000

config THTTPD_CGI_TIMELIMIT
	int "CGI time limit"
	default 0
	---help---
		How many seconds to allow CGI programs to run before killing them.
		Default: 0 (no time limit)

config THTTPD_CHARSET
	string "Default character set"
	default "iso-8859-1"
	---help---
		The default character set name to use with text MIME types.
		Default: "iso-8859-1"

config THTTPD_IOBUFFERSIZE
	int "Initial I/O buffer size"
	default 256
	---help---
		Initial I/O buffer size.  Default: 256

config THTTPD_MINSTRSIZE
	int "Minimum string size"
	default 64
	---help---
		Minimum string size.  Default: 64

config THTTPD_REALLOCINCR
	int "String reallocation increment"
	default 64
	---help---
		String reallocation increment.  Default: 64

config THTTPD_MAXREALLOC
	int "Maximum string reallocation size"
	default 4096
	---help---
		Maximum string reallocation size.  Default: 4096

config THTTPD_CGIINBUFFERSIZ
	int "CGI interpose input buffer size"
	default 512
	---help---
		CGI interpose input buffer size.  Default: 512

config THTTPD_CGIOUTBUFFERSIZE
	int "CGI interpose output buffer size"
	default 512
	---help---
		CGI interpose output buffer size.  Default: 512

config THTTPD_INDEX_NAMES
	string "Index file name list"
	default "\"index.html\", \"index.htm\", \"index.cgi\""
	---help---
		A list of index filenames to check. The files are searched for
		in this order.  Default: "\"index.html\", \"index.htm\", \"index.cgi\""

config THTTPD_USE_AUTH_FILE
	bool "Use authentication file"
	default n
	---help---
		Select to define an authentication file that thttpd will check in
		the local directory before every fetch. If the file exists then
		authentication is done, otherwise the fetch proceeds as usual. If
		you leave this undefined then thttpd will not implement
		authentication at all and will not check for auth files, which saves
		a bit of CPU time.

config AUTH_FILE
	string "Authorization file"
	default ".htpasswd"
	depends on THTTPD_USE_AUTH_FILE
	---help---
		The file to use for authentication. thttpd checks for this file in
		the local directory before every fetch. If the file exists then
		authentication is done, otherwise the fetch proceeds as usual. A
		typical value is ".htpasswd"

config THTTPD_LISTEN_BACKLOG
	int "Listen backlog"
	default 8
	---help---
		The listen() backlog queue length.  Default: 8

config THTTPD_LINGER_MSEC
	int "Linger time (msec)"
	default 500
	---help---
		How many milliseconds to leave a connection open while doing a lingering
		close.  Default: 500

config THTTPD_OCCASIONAL_MSEC
	int "Occasional clean-up time (msec)"
	default 120
	---help---
		How often to run the occasional cleanup job in milliseconds.
		Default: 120 (2 minutes)

config THTTPD_MEMDEBUG
	bool "Enable memory debug"
	default n
	depends on DEBUG_FEATURES && DEBUG_NET
	---help---
		Enable THTTPD memory usage debug output.  Default: n

config THTTPD_IDLE_READ_LIMIT_SEC
	int "Idle read time limit (sec)"
	default 300
	---help---
		How many seconds to allow for reading the initial request on a new connection.
		Default: 300

config THTTPD_IDLE_SEND_LIMIT_SEC
	int "Idle send time limit (sec)"
	default 300
	---help---
		How many seconds before an idle connection gets closed.
		Default: 300

choice
	prompt "Tilde Mapping"
	default THTTPD_TILDE_MAP_NONE
	---help---
		Tilde mapping. Many URLs use ~username to indicate a user's home
		directory. thttpd provides two options for mapping this construct to
		an actual filename.

		1) Map ~username to <prefix>/username. This is the recommended
		choice. Each user gets a subdirectory in the main web tree, and
		the tilde construct points there.

		The prefix could be something like "users", or it could be empty.

		2) Map ~username to <user's homedir>/<postfix>. The postfix would be
		the name of a subdirectory off of the user's actual home dir,
		something like "public_html".

		3) Niether.  You can also leave both options undefined, and thttpd
		will not do anything special about tildes. Enabling both options
		is an error.

		Typical values, if they're defined, are "users" for THTTPD_TILDE_MAP1
		and "public_html" for THTTPD_TILDE_MAP2.

config THTTPD_USE_TILDE_MAP1
	bool "Tilde mapping 1"
	---help---
		Tilde mapping. Many URLs use ~username to indicate a user's home
		directory. thttpd provides two options for mapping this construct to
		an actual filename.  Choose this option for the first mapping:

		1) Map ~username to <prefix>/username. This is the recommended
		choice. Each user gets a subdirectory in the main web tree, and
		the tilde construct points there.

		The prefix could be something like "users", or it could be empty.

config THTTPD_USE_TILDE_MAP2
	bool "Tilde mapping 2"
	---help---
		Tilde mapping. Many URLs use ~username to indicate a user's home
		directory. thttpd provides two options for mapping this construct to
		an actual filename.  Choose this option for the second mapping:

		2) Map ~username to <user's homedir>/<postfix>. The postfix would be
		the name of a subdirectory off of the user's actual home dir,
		something like "public_html".

		The typical value THTTPD_TILDE_MAP2 is "public_html".

config THTTPD_TILDE_MAP_NONE
	bool "No tilde mapping"
	---help---
		Tilde mapping. Many URLs use ~username to indicate a user's home
		directory. thttpd provides two options for mapping this construct to
		an actual filename.  Choose this option to omit tilde mapping: thttpd
		will not do anything special about tildes.

endchoice

config THTTPD_TILDE_MAP1
	string "Tilde mapping 1"
	default "user"
	depends on THTTPD_USE_TILDE_MAP1
	---help---
		Tilde mapping. Many URLs use ~username to indicate a user's home
		directory. thttpd provides two options for mapping this construct to
		an actual filename.  Choose this option defines the <prefix> string
		for the first mapping:

		1) Map ~username to <prefix>/username. This is the recommended
		choice. Each user gets a subdirectory in the main web tree, and
		the tilde construct points there.

		The prefix could be something like "users", or it could be empty.

config THTTPD_TILDE_MAP2
	string "Tilde mapping 2"
	default "public_html"
	depends on THTTPD_USE_TILDE_MAP2
	---help---
		Tilde mapping. Many URLs use ~username to indicate a user's home
		directory. thttpd provides two options for mapping this construct to
		an actual filename.  Choose this option defines the <postfix> string
		for the second mapping:

		2) Map ~username to <user's homedir>/<postfix>. The postfix would be
		the name of a subdirectory off of the user's actual home dir,
		something like "public_html".

		The typical value THTTPD_TILDE_MAP2 is "public_html".

config THTTPD_GENERATE_INDICES
	bool "Generate name indices"
	default n
	---help---

config THTTPD_USE_URLPATTERN
	bool "Use URL pattern"
	default n
	---help---
		Select to define a URL pattern that will be used to match and verify
		referrers.

config THTTPD_URLPATTERN
	string "URL pattern"
	default ""
	depends on THTTPD_USE_URLPATTERN
	---help---
		This string defines the UARL pattern that will be used to match and
		verify referrers.

endif