nuttx-apps/examples/usrsocktest/usrsocktest_block_recv.c

515 lines
17 KiB
C
Raw Normal View History

/****************************************************************************
* examples/usrsocktest/usrsocktest_block_recv.c
* Receive from the socket in blocking mode
*
* Copyright (C) 2015, 2017 Haltian Ltd. All rights reserved.
* Authors: Roman Saveljev <roman.saveljev@haltian.com>
* Jussi Kivilinna <jussi.kivilinna@haltian.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <sys/socket.h>
#include <errno.h>
#include <sys/types.h>
#include <stdbool.h>
#include <assert.h>
#include <fcntl.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#include <sys/time.h>
#include "defines.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/****************************************************************************
* Private Types
****************************************************************************/
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/****************************************************************************
* Private Data
****************************************************************************/
static bool started;
static int sd;
/****************************************************************************
* Public Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: ConnectReceive
*
* Description:
* Blocking connect and receive
*
* Input Parameters:
* dconf - socket daemon configuration
*
* Returned Value:
* None
*
* Assumptions/Limitations:
* None
*
****************************************************************************/
static void ConnectReceive(FAR struct usrsocktest_daemon_conf_s *dconf)
{
ssize_t ret;
size_t datalen;
void *data;
struct sockaddr_in addr;
char databuf[5];
/* Start test daemon. */
dconf->endpoint_addr = "127.0.0.1";
dconf->endpoint_port = 255;
dconf->endpoint_block_connect = true;
dconf->endpoint_block_send = true;
dconf->endpoint_recv_avail_from_start = false;
dconf->endpoint_recv_avail = 7;
TEST_ASSERT_EQUAL(OK, usrsocktest_daemon_start(dconf));
started = true;
TEST_ASSERT_EQUAL(0, usrsocktest_daemon_get_num_active_sockets());
/* Open socket */
sd = socket(AF_INET, SOCK_STREAM, 0);
TEST_ASSERT_TRUE(sd >= 0);
TEST_ASSERT_EQUAL(1, usrsocktest_daemon_get_num_active_sockets());
TEST_ASSERT_EQUAL(0, usrsocktest_daemon_get_num_connected_sockets());
TEST_ASSERT_EQUAL(0, usrsocktest_daemon_get_num_waiting_connect_sockets());
TEST_ASSERT_EQUAL(1, usrsocktest_daemon_get_num_recv_empty_sockets());
/* Do connect, should succeed (after connect block released). */
inet_pton(AF_INET, "127.0.0.1", &addr.sin_addr.s_addr);
addr.sin_family = AF_INET;
addr.sin_port = htons(255);
TEST_ASSERT_TRUE(usrsocktest_send_delayed_command('E', 100));
ret = connect(sd, (FAR const struct sockaddr *)&addr, sizeof(addr));
TEST_ASSERT_EQUAL(0, ret);
TEST_ASSERT_EQUAL(1, usrsocktest_daemon_get_num_active_sockets());
TEST_ASSERT_EQUAL(1, usrsocktest_daemon_get_num_connected_sockets());
TEST_ASSERT_EQUAL(0, usrsocktest_daemon_get_num_waiting_connect_sockets());
TEST_ASSERT_EQUAL(1, usrsocktest_daemon_get_num_recv_empty_sockets());
/* Receive data from remote */
data = databuf;
datalen = sizeof(databuf);
TEST_ASSERT_TRUE(usrsocktest_send_delayed_command('r', 100));
ret = recvfrom(sd, data, datalen, 0, NULL, 0);
TEST_ASSERT_EQUAL(datalen, ret);
TEST_ASSERT_EQUAL(5, ret);
TEST_ASSERT_EQUAL_UINT8_ARRAY("abcde", data, 5);
TEST_ASSERT_EQUAL(1, usrsocktest_daemon_get_num_connected_sockets());
TEST_ASSERT_EQUAL(1, usrsocktest_daemon_get_num_active_sockets());
TEST_ASSERT_EQUAL(5, usrsocktest_daemon_get_recv_bytes());
TEST_ASSERT_EQUAL(0, usrsocktest_daemon_get_num_recv_empty_sockets());
/* Receive data from remote */
data = databuf;
datalen = sizeof(databuf);
ret = recvfrom(sd, data, datalen, 0, NULL, 0);
TEST_ASSERT_EQUAL(2, ret);
TEST_ASSERT_EQUAL_UINT8_ARRAY("ab", data, 2);
TEST_ASSERT_EQUAL(1, usrsocktest_daemon_get_num_connected_sockets());
TEST_ASSERT_EQUAL(1, usrsocktest_daemon_get_num_active_sockets());
TEST_ASSERT_EQUAL(7, usrsocktest_daemon_get_recv_bytes());
TEST_ASSERT_EQUAL(1, usrsocktest_daemon_get_num_recv_empty_sockets());
/* Close socket */
TEST_ASSERT_TRUE(close(sd) >= 0);
sd = -1;
TEST_ASSERT_EQUAL(0, usrsocktest_daemon_get_num_active_sockets());
TEST_ASSERT_EQUAL(0, usrsocktest_daemon_get_num_connected_sockets());
/* Stopping daemon should succeed. */
TEST_ASSERT_EQUAL(OK, usrsocktest_daemon_stop());
started = false;
TEST_ASSERT_EQUAL(-ENODEV, usrsocktest_daemon_get_num_active_sockets());
TEST_ASSERT_EQUAL(-ENODEV, usrsocktest_daemon_get_num_connected_sockets());
TEST_ASSERT_EQUAL(0, usrsocktest_endp_malloc_cnt);
TEST_ASSERT_EQUAL(0, usrsocktest_dcmd_malloc_cnt);
}
/****************************************************************************
* Name: NoBlockConnect
*
* Description:
* Non-blocking connect and blocking receive
*
* Input Parameters:
* dconf - socket daemon configuration
*
* Returned Value:
* None
*
* Assumptions/Limitations:
* None
*
****************************************************************************/
static void NoBlockConnect(FAR struct usrsocktest_daemon_conf_s *dconf)
{
ssize_t ret;
size_t datalen;
void *data;
struct sockaddr_in addr;
char databuf[5];
struct sockaddr_in remoteaddr;
socklen_t addrlen;
/* Start test daemon. */
dconf->endpoint_addr = "127.0.0.1";
dconf->endpoint_port = 255;
dconf->endpoint_block_connect = true;
dconf->endpoint_block_send = true;
dconf->endpoint_recv_avail_from_start = true;
dconf->endpoint_recv_avail = 6;
TEST_ASSERT_EQUAL(OK, usrsocktest_daemon_start(dconf));
started = true;
TEST_ASSERT_EQUAL(0, usrsocktest_daemon_get_num_active_sockets());
/* Open socket */
sd = socket(AF_INET, SOCK_STREAM, 0);
TEST_ASSERT_TRUE(sd >= 0);
TEST_ASSERT_EQUAL(1, usrsocktest_daemon_get_num_active_sockets());
TEST_ASSERT_EQUAL(0, usrsocktest_daemon_get_num_connected_sockets());
TEST_ASSERT_EQUAL(0, usrsocktest_daemon_get_num_waiting_connect_sockets());
/* Do connect, should succeed (after connect block released). */
inet_pton(AF_INET, "127.0.0.1", &addr.sin_addr.s_addr);
addr.sin_family = AF_INET;
addr.sin_port = htons(255);
TEST_ASSERT_TRUE(usrsocktest_send_delayed_command('W', 100));
TEST_ASSERT_TRUE(usrsocktest_send_delayed_command('E', 100));
ret = connect(sd, (FAR const struct sockaddr *)&addr, sizeof(addr));
TEST_ASSERT_EQUAL(0, ret);
TEST_ASSERT_EQUAL(1, usrsocktest_daemon_get_num_active_sockets());
TEST_ASSERT_EQUAL(1, usrsocktest_daemon_get_num_connected_sockets());
TEST_ASSERT_EQUAL(0, usrsocktest_daemon_get_num_waiting_connect_sockets());
TEST_ASSERT_EQUAL(0, usrsocktest_daemon_get_num_recv_empty_sockets());
/* Receive data from remote */
data = databuf;
datalen = sizeof(databuf);
ret = read(sd, data, datalen);
TEST_ASSERT_EQUAL(datalen, ret);
TEST_ASSERT_EQUAL(5, ret);
TEST_ASSERT_EQUAL_UINT8_ARRAY("abcde", data, 5);
TEST_ASSERT_EQUAL(1, usrsocktest_daemon_get_num_connected_sockets());
TEST_ASSERT_EQUAL(1, usrsocktest_daemon_get_num_active_sockets());
TEST_ASSERT_EQUAL(5, usrsocktest_daemon_get_recv_bytes());
TEST_ASSERT_EQUAL(0, usrsocktest_daemon_get_num_waiting_connect_sockets());
TEST_ASSERT_EQUAL(0, usrsocktest_daemon_get_num_recv_empty_sockets());
/* Receive data from remote */
data = databuf;
datalen = sizeof(databuf);
addrlen = sizeof(remoteaddr);
ret = recvfrom(sd, data, datalen, 0, (FAR struct sockaddr *)&remoteaddr,
&addrlen);
TEST_ASSERT_EQUAL(1, ret);
TEST_ASSERT_EQUAL_UINT8_ARRAY("a", data, 1);
TEST_ASSERT_EQUAL(sizeof(remoteaddr), addrlen);
TEST_ASSERT_EQUAL_UINT8_ARRAY(&remoteaddr, &addr, addrlen);
TEST_ASSERT_EQUAL(1, usrsocktest_daemon_get_num_connected_sockets());
TEST_ASSERT_EQUAL(1, usrsocktest_daemon_get_num_active_sockets());
TEST_ASSERT_EQUAL(6, usrsocktest_daemon_get_recv_bytes());
TEST_ASSERT_EQUAL(1, usrsocktest_daemon_get_num_recv_empty_sockets());
/* Receive data from remote */
data = databuf;
datalen = sizeof(databuf);
addrlen = sizeof(remoteaddr);
TEST_ASSERT_TRUE(usrsocktest_send_delayed_command('r', 100));
ret = recvfrom(sd, data, datalen, 0, (FAR struct sockaddr *)&remoteaddr,
&addrlen);
TEST_ASSERT_EQUAL(5, ret);
TEST_ASSERT_EQUAL_UINT8_ARRAY("abcde", data, 5);
TEST_ASSERT_EQUAL(sizeof(remoteaddr), addrlen);
TEST_ASSERT_EQUAL_UINT8_ARRAY(&remoteaddr, &addr, addrlen);
TEST_ASSERT_EQUAL(1, usrsocktest_daemon_get_num_connected_sockets());
TEST_ASSERT_EQUAL(1, usrsocktest_daemon_get_num_active_sockets());
TEST_ASSERT_EQUAL(11, usrsocktest_daemon_get_recv_bytes());
TEST_ASSERT_EQUAL(0, usrsocktest_daemon_get_num_recv_empty_sockets());
/* Close socket */
TEST_ASSERT_TRUE(close(sd) >= 0);
sd = -1;
TEST_ASSERT_EQUAL(0, usrsocktest_daemon_get_num_active_sockets());
TEST_ASSERT_EQUAL(0, usrsocktest_daemon_get_num_connected_sockets());
TEST_ASSERT_EQUAL(11, usrsocktest_daemon_get_recv_bytes());
TEST_ASSERT_EQUAL(0, usrsocktest_daemon_get_num_recv_empty_sockets());
/* Stopping daemon should succeed. */
TEST_ASSERT_EQUAL(OK, usrsocktest_daemon_stop());
started = false;
TEST_ASSERT_EQUAL(-ENODEV, usrsocktest_daemon_get_num_active_sockets());
TEST_ASSERT_EQUAL(-ENODEV, usrsocktest_daemon_get_num_connected_sockets());
TEST_ASSERT_EQUAL(0, usrsocktest_endp_malloc_cnt);
TEST_ASSERT_EQUAL(0, usrsocktest_dcmd_malloc_cnt);
}
/****************************************************************************
* Name: ReceiveTimeout
*
* Description:
* Blocking connect and receive with SO_RCVTIMEO
*
* Input Parameters:
* dconf - socket daemon configuration
*
* Returned Value:
* None
*
* Assumptions/Limitations:
* None
*
****************************************************************************/
static void ReceiveTimeout(FAR struct usrsocktest_daemon_conf_s *dconf)
{
ssize_t ret;
size_t datalen;
void *data;
struct sockaddr_in addr;
char databuf[5];
struct timeval tv;
/* Start test daemon. */
dconf->endpoint_addr = "127.0.0.1";
dconf->endpoint_port = 255;
dconf->endpoint_block_connect = true;
dconf->endpoint_block_send = true;
dconf->endpoint_recv_avail_from_start = false;
dconf->endpoint_recv_avail = 7;
TEST_ASSERT_EQUAL(OK, usrsocktest_daemon_start(dconf));
started = true;
TEST_ASSERT_EQUAL(0, usrsocktest_daemon_get_num_active_sockets());
/* Open socket */
sd = socket(AF_INET, SOCK_STREAM, 0);
TEST_ASSERT_TRUE(sd >= 0);
TEST_ASSERT_EQUAL(1, usrsocktest_daemon_get_num_active_sockets());
TEST_ASSERT_EQUAL(0, usrsocktest_daemon_get_num_connected_sockets());
TEST_ASSERT_EQUAL(0, usrsocktest_daemon_get_num_waiting_connect_sockets());
TEST_ASSERT_EQUAL(1, usrsocktest_daemon_get_num_recv_empty_sockets());
/* Do connect, should succeed (after connect block released). */
inet_pton(AF_INET, "127.0.0.1", &addr.sin_addr.s_addr);
addr.sin_family = AF_INET;
addr.sin_port = htons(255);
TEST_ASSERT_TRUE(usrsocktest_send_delayed_command('E', 100));
ret = connect(sd, (FAR const struct sockaddr *)&addr, sizeof(addr));
TEST_ASSERT_EQUAL(0, ret);
TEST_ASSERT_EQUAL(1, usrsocktest_daemon_get_num_active_sockets());
TEST_ASSERT_EQUAL(1, usrsocktest_daemon_get_num_connected_sockets());
TEST_ASSERT_EQUAL(0, usrsocktest_daemon_get_num_waiting_connect_sockets());
TEST_ASSERT_EQUAL(1, usrsocktest_daemon_get_num_recv_empty_sockets());
/* Setup recv timeout. */
tv.tv_sec = 0;
tv.tv_usec = 100 * 1000;
ret = setsockopt(sd, SOL_SOCKET, SO_RCVTIMEO, (FAR const void *)&tv,
sizeof(tv));
TEST_ASSERT_EQUAL(0, ret);
/* Receive data from remote */
data = databuf;
datalen = sizeof(databuf);
ret = recvfrom(sd, data, datalen, 0, NULL, 0);
TEST_ASSERT_EQUAL(-1, ret);
TEST_ASSERT_EQUAL(EAGAIN, errno);
TEST_ASSERT_EQUAL(1, usrsocktest_daemon_get_num_connected_sockets());
TEST_ASSERT_EQUAL(1, usrsocktest_daemon_get_num_active_sockets());
TEST_ASSERT_EQUAL(0, usrsocktest_daemon_get_recv_bytes());
TEST_ASSERT_EQUAL(1, usrsocktest_daemon_get_num_recv_empty_sockets());
/* Close socket */
TEST_ASSERT_TRUE(close(sd) >= 0);
sd = -1;
TEST_ASSERT_EQUAL(0, usrsocktest_daemon_get_num_active_sockets());
TEST_ASSERT_EQUAL(0, usrsocktest_daemon_get_num_connected_sockets());
/* Stopping daemon should succeed. */
TEST_ASSERT_EQUAL(OK, usrsocktest_daemon_stop());
started = false;
TEST_ASSERT_EQUAL(-ENODEV, usrsocktest_daemon_get_num_active_sockets());
TEST_ASSERT_EQUAL(-ENODEV, usrsocktest_daemon_get_num_connected_sockets());
TEST_ASSERT_EQUAL(0, usrsocktest_endp_malloc_cnt);
TEST_ASSERT_EQUAL(0, usrsocktest_dcmd_malloc_cnt);
}
/****************************************************************************
* Name: BlockRecv test group setup
*
* Description:
* Setup function executed before each testcase in this test group
*
* Input Parameters:
* None
*
* Returned Value:
* None
*
* Assumptions/Limitations:
* None
*
****************************************************************************/
TEST_SETUP(BlockRecv)
{
sd = -1;
started = false;
}
/****************************************************************************
* Name: BlockRecv test group teardown
*
* Description:
* Setup function executed after each testcase in this test group
*
* Input Parameters:
* None
*
* Returned Value:
* None
*
* Assumptions/Limitations:
* None
*
****************************************************************************/
TEST_TEAR_DOWN(BlockRecv)
{
int ret;
if (sd >= 0)
{
ret = close(sd);
assert(ret >= 0);
}
if (started)
{
ret = usrsocktest_daemon_stop();
assert(ret == OK);
}
}
TEST(BlockRecv, ConnectReceive)
{
usrsocktest_daemon_config = usrsocktest_daemon_defconf;
ConnectReceive(&usrsocktest_daemon_config);
}
TEST(BlockRecv, ConnectReceiveDelay)
{
usrsocktest_daemon_config = usrsocktest_daemon_defconf;
usrsocktest_daemon_config.delay_all_responses = true;
ConnectReceive(&usrsocktest_daemon_config);
}
TEST(BlockRecv, NoBlockConnect)
{
usrsocktest_daemon_config = usrsocktest_daemon_defconf;
NoBlockConnect(&usrsocktest_daemon_config);
}
TEST(BlockRecv, NoBlockConnectDelay)
{
usrsocktest_daemon_config = usrsocktest_daemon_defconf;
usrsocktest_daemon_config.delay_all_responses = true;
NoBlockConnect(&usrsocktest_daemon_config);
}
TEST(BlockRecv, ReceiveTimeout)
{
usrsocktest_daemon_config = usrsocktest_daemon_defconf;
ReceiveTimeout(&usrsocktest_daemon_config);
}
TEST(BlockRecv, ReceiveTimeoutDelay)
{
usrsocktest_daemon_config = usrsocktest_daemon_defconf;
usrsocktest_daemon_config.delay_all_responses = true;
ReceiveTimeout(&usrsocktest_daemon_config);
}
/****************************************************************************
* Public Functions
****************************************************************************/
TEST_GROUP(BlockRecv)
{
RUN_TEST_CASE(BlockRecv, ConnectReceive);
RUN_TEST_CASE(BlockRecv, ConnectReceiveDelay);
RUN_TEST_CASE(BlockRecv, NoBlockConnect);
RUN_TEST_CASE(BlockRecv, NoBlockConnectDelay);
RUN_TEST_CASE(BlockRecv, ReceiveTimeout);
RUN_TEST_CASE(BlockRecv, ReceiveTimeoutDelay);
}