nuttx-apps/examples/udpblaster/Kconfig

#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#

config EXAMPLES_UDPBLASTER
	tristate "UDP blaster example"
	default n
	depends on NET_UDP
	---help---
		Enable the network test example

if EXAMPLES_UDPBLASTER

config EXAMPLES_UDPBLASTER_PROGNAME
	string "Program name"
	default "nettest"
	depends on BUILD_LOADABLE
	---help---
		This is the name of the program that will be use when the Nettest
		program is installed.

config EXAMPLES_UDPBLASTER_STACKSIZE
	int "Nettest stack size"
	default 2048

config EXAMPLES_UDPBLASTER_PRIORITY
	int "Nettest priority"
	default 100

config EXAMPLES_UDPBLASTER_POLLOUT
	bool "Use poll() to pace output"
	default n
	depends on !DISABLE_POLL
	---help---
		Client will use poll() to verify that sendto() will not block.  This
		does not improve performance (in fact, it will degrade perform
		slightly).  But it is useful for verifying that poll() can be used
		to pace output.

config EXAMPLES_UDPBLASTER_HOSTRATE
	int "Host send rate (bits/second)"
	default 800000

choice
	prompt "IP Domain"
	default EXAMPLES_UDPBLASTER_IPv4 if NET_IPv4
	default EXAMPLES_UDPBLASTER_IPv6 if NET_IPv6 && !NET_IPv4

config EXAMPLES_UDPBLASTER_IPv4
	bool "IPv4"
	depends on NET_IPv4

config EXAMPLES_UDPBLASTER_IPv6
	bool "IPv6"
	depends on NET_IPv6

endchoice # IP Domain

config EXAMPLES_UDPBLASTER_INIT
	bool "Initialize network"
	default n if NSH_BUILTIN_APPS
	default y if !NSH_BUILTIN_APPS
	depends on !BUILD_LOADABLE && !EXAMPLES_UDPBLASTER_LOOPBACK
	---help---
		Include logic to initialize the network.  This should not be done if
		the network is already initialized when udpblaster runs.  This is
		usually the case, for example, when udpblaster is run as an NSH built-
		in task.

config EXAMPLES_UDPBLASTER_NOMAC
	bool "Use Canned MAC Address"
	default n
	depends on EXAMPLES_UDPBLASTER_INIT

if EXAMPLES_UDPBLASTER_IPv4

comment "IPv4 addresses"

config EXAMPLES_UDPBLASTER_TARGETIP
	hex "Target IP address"
	default 0x0a000002

config EXAMPLES_UDPBLASTER_HOSTIP
	hex "Host IP address)"
	default 0x0a000001

if EXAMPLES_UDPBLASTER_INIT

config EXAMPLES_UDPBLASTER_NETMASK
	hex "Network Mask"
	default 0xffffff00

endif # EXAMPLES_UDPBLASTER_INIT
endif # EXAMPLES_UDPBLASTER_IPv4

if EXAMPLES_UDPBLASTER_IPv6
if !NET_ICMPv6_AUTOCONF

comment "Target IPv6 address"

config EXAMPLES_UDPBLASTER_TARGETIPv6_1
	hex "[0]"
	default 0xfc00
	range 0x0 0xffff
	---help---
		Target IPv6 address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the first of the 8-values.  The
		default for all eight values is fc00::2.

config EXAMPLES_UDPBLASTER_TARGETIPv6_2
	hex "[1]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Target IPv6 address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the second of the 8-values.  The
		default for all eight values is fc00::2.

config EXAMPLES_UDPBLASTER_TARGETIPv6_3
	hex "[2]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Target IPv6 address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the third of the 8-values.  The
		default for all eight values is fc00::2.

config EXAMPLES_UDPBLASTER_TARGETIPv6_4
	hex "[3]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Target IPv6 address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the fourth of the 8-values.  The
		default for all eight values is fc00::2.

config EXAMPLES_UDPBLASTER_TARGETIPv6_5
	hex "[4]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Target IPv6 address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the fifth of the 8-values.  The
		default for all eight values is fc00::2.

config EXAMPLES_UDPBLASTER_TARGETIPv6_6
	hex "[5]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Target IPv6 address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the sixth of the 8-values.  The
		default for all eight values is fc00::2.

config EXAMPLES_UDPBLASTER_TARGETIPv6_7
	hex "[6]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Target IPv6 address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the seventh of the 8-values.  The
		default for all eight values is fc00::2.

config EXAMPLES_UDPBLASTER_TARGETIPv6_8
	hex "[7]"
	default 0x0002
	range 0x0 0xffff
	---help---
		Target IPv6 address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the last of the 8-values.  The
		default for all eight values is fc00::2.

comment "Host IPv6 address"

config EXAMPLES_UDPBLASTER_HOSTIPv6_1
	hex "[0]"
	default 0xfc00
	range 0x0 0xffff
	---help---
		Host IP address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the first of the 8-values.
		The default for all eight values is fc00::1.

config EXAMPLES_UDPBLASTER_HOSTIPv6_2
	hex "[1]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Host IP address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the second of the 8-values.
		The default for all eight values is fc00::1.

config EXAMPLES_UDPBLASTER_HOSTIPv6_3
	hex "[2]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Host IP address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the third of the 8-values.
		The default for all eight values is fc00::1.

config EXAMPLES_UDPBLASTER_HOSTIPv6_4
	hex "[3]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Host IP address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the fourth of the 8-values.
		The default for all eight values is fc00::1.

config EXAMPLES_UDPBLASTER_HOSTIPv6_5
	hex "[4]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Host IP address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the fifth of the 8-values.
		The default for all eight values is fc00::1.

config EXAMPLES_UDPBLASTER_HOSTIPv6_6
	hex "[5]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Host IP address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the sixth of the 8-values.
		The default for all eight values is fc00::1.

config EXAMPLES_UDPBLASTER_HOSTIPv6_7
	hex "[6]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Host IP address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the seventh of the 8-values.
		The default for all eight values is fc00::1.

config EXAMPLES_UDPBLASTER_HOSTIPv6_8
	hex "[7]"
	default 0x0001
	range 0x0 0xffff
	---help---
		Host IP address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the last of the 8-values.
		The default for all eight values is fc00::1.

if EXAMPLES_UDPBLASTER_INIT

comment "IPv6 Network mask"

config EXAMPLES_UDPBLASTER_IPv6NETMASK_1
	hex "[0]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the first of the 8-values.  The default for
		all eight values is fe00::0.

config EXAMPLES_UDPBLASTER_IPv6NETMASK_2
	hex "[1]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the second of the 8-values.  The default for
		all eight values is fe00::0.

config EXAMPLES_UDPBLASTER_IPv6NETMASK_3
	hex "[2]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the third of the 8-values.  The default for
		all eight values is fe00::0.

config EXAMPLES_UDPBLASTER_IPv6NETMASK_4
	hex "[3]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the fourth of the 8-values.  The default for
		all eight values is fe00::0.

config EXAMPLES_UDPBLASTER_IPv6NETMASK_5
	hex "[4]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the fifth of the 8-values.  The default for
		all eight values is fe00::0.

config EXAMPLES_UDPBLASTER_IPv6NETMASK_6
	hex "[5]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the sixth of the 8-values.  The default for
		all eight values is fe00::0.

config EXAMPLES_UDPBLASTER_IPv6NETMASK_7
	hex "[6]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the seventh of the 8-values.  The default for
		all eight values is fe00::0.

config EXAMPLES_UDPBLASTER_IPv6NETMASK_8
	hex "[7]"
	default 0xff80
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the eighth of the 8-values.  The default for
		all eight values is fe00::0.

endif # NET_ICMPv6_AUTOCONF
endif # EXAMPLES_UDPBLASTER_INIT
endif # EXAMPLES_UDPBLASTER_IPv6
endif # EXAMPLES_UDPBLASTER