nuttx-apps/include/system/zmodem.h

336 lines
11 KiB
C
Raw Normal View History

/****************************************************************************
* apps/include/system/zmodem.h
*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership. The
* ASF licenses this file to you under the Apache License, Version 2.0 (the
* "License"); you may not use this file except in compliance with the
* License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
* License for the specific language governing permissions and limitations
* under the License.
*
****************************************************************************/
/* References:
* "The ZMODEM Inter Application File Transfer Protocol", Chuck Forsberg,
* Omen Technology Inc., October 14, 1988
*/
#ifndef __APPS_INCLUDE_SYSTEM_ZMODEM_H
#define __APPS_INCLUDE_SYSTEM_ZMODEM_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
2013-07-13 21:19:15 +02:00
/* The default device used by the Zmodem commands if the -d option is not
* provided on the sz or rz command line.
*/
#ifndef CONFIG_SYSTEM_ZMODEM_DEVNAME
# define CONFIG_SYSTEM_ZMODEM_DEVNAME "/dev/console"
#endif
2013-07-15 01:01:23 +02:00
/* The size of one buffer used to read data from the remote peer. The total
* buffering capability is SYSTEM_ZMODEM_RCVBUFSIZE plus the size of the RX
* buffer in the device driver. If you are using a serial driver with, say,
* USART0. That that buffering capability includes USART0_RXBUFFERSIZE.
* This total buffering capability must be significantly larger than
* SYSTEM_ZMODEM_PKTBUFSIZE (larger due streaming race conditions, data
* expansion due to escaping, and possible protocol overhead).
*/
#ifndef CONFIG_SYSTEM_ZMODEM_RCVBUFSIZE
# define CONFIG_SYSTEM_ZMODEM_RCVBUFSIZE 512
#endif
/* Data may be received in gulps of varying size and alignment. Received
* packets data is properly unescaped, aligned and packed into a packet
2013-07-15 01:01:23 +02:00
* buffer of this size.
*/
#ifndef CONFIG_SYSTEM_ZMODEM_PKTBUFSIZE
# define CONFIG_SYSTEM_ZMODEM_PKTBUFSIZE 512
#endif
/* The size of one transmit buffer used for composing messages sent to the
* remote peer.
*/
#ifndef CONFIG_SYSTEM_ZMODEM_SNDBUFSIZE
# define CONFIG_SYSTEM_ZMODEM_SNDBUFSIZE 512
#endif
/* Absolute paths are not accepted. This configuration value must be
* set to provide the path to the file storage directory (such as a
* mountpoint directory).
*/
#ifndef CONFIG_SYSTEM_ZMODEM_MOUNTPOINT
# define CONFIG_SYSTEM_ZMODEM_MOUNTPOINT "/tmp"
#endif
/* CONFIG_SYSTEM_ZMODEM_RCVSAMPLE indicates the local sender can sample
* reverse channel while sending. This means in particular, that Zmodem can
* detect if data is received from the remote receiver while streaming a file
* to the remote receiver. Support for such asychronous incoming data
* notification is needed to support interruption of the file transfer by
* the remote receiver.
*
* This capapability is not yet supported. There are only incomplete hooks
* in the code now!
*/
#ifdef CONFIG_SYSTEM_ZMODEM_RCVSAMPLE
# warning CONFIG_SYSTEM_ZMODEM_RCVSAMPLE not yet supported
# undef CONFIG_SYSTEM_ZMODEM_RCVSAMPLE
#endif
/* CONFIG_SYSTEM_ZMODEM_SENDATTN indicates that the local sender retains
* an attention string that will be sent to the remote receiver
*
* This capapability is not yet supported. There are only incomplete hooks
* in the code now!
*/
#ifdef CONFIG_SYSTEM_ZMODEM_SENDATTN
# warning CONFIG_SYSTEM_ZMODEM_SENDATTN not yet supported
# undef CONFIG_SYSTEM_ZMODEM_SENDATTN
#endif
/* Response time for sender to respond to requests */
#ifndef CONFIG_SYSTEM_ZMODEM_RESPTIME
# define CONFIG_SYSTEM_ZMODEM_RESPTIME 10
#endif
2013-07-16 00:21:20 +02:00
/* When rz starts, it must wait a for the remote end to start the file
* transfer. This may take longer than the normal response time. This
* value may be set to tune that longer timeout value.
*/
#ifndef CONFIG_SYSTEM_ZMODEM_CONNTIME
# define CONFIG_SYSTEM_ZMODEM_CONNTIME 30
#endif
/* Receiver serial number */
#ifndef CONFIG_SYSTEM_ZMODEM_SERIALNO
# define CONFIG_SYSTEM_ZMODEM_SERIALNO 1
#endif
/* Max receive errors before canceling the transfer */
#ifndef CONFIG_SYSTEM_ZMODEM_MAXERRORS
# define CONFIG_SYSTEM_ZMODEM_MAXERRORS 20
#endif
/* Some MMC/SD drivers may fail if large transfers are attempted. As a bug
* workaround, you can set the maximum write size with this configuration.
* The default value of 0 means no write limit.
*/
#ifndef CONFIG_SYSTEM_ZMODEM_WRITESIZE
# define CONFIG_SYSTEM_ZMODEM_WRITESIZE 0
#endif
/* Absolute paths in received file names are not accepted. This
* configuration value must be set to provide the path to the file storage
* directory (such as a mountpoint directory).
*
* Names of file send by the sz command, on the other hand, must be absolute
* paths beginning with '/'.
*/
#ifndef CONFIG_SYSTEM_ZMODEM_MOUNTPOINT
# define CONFIG_SYSTEM_ZMODEM_MOUNTPOINT "/tmp"
#endif
/****************************************************************************
* Public Types
****************************************************************************/
/* Opaque handles returned by initialization functions */
typedef FAR void *ZMHANDLE;
typedef FAR void *ZMRHANDLE;
typedef FAR void *ZMSHANDLE;
/* Enumerations describing arguments to zms_initialize() */
enum zm_xfertype_e
{
XM_XFERTYPE_NORMAL = 0, /* Normal file transfer */
XM_XFERTYPE_BINARY = 1, /* Binary transfer */
XM_XFERTYPE_ASCII = 2, /* Convert \n to local EOL convention */
XM_XFERTYPE_RESUME = 3 /* Resume interrupted transfer or append to file. */
};
enum zm_option_e
{
XM_OPTION_NONE = 0, /* Transfer if source newer or longer */
XM_OPTION_NEWL = 1, /* Transfer if source newer or longer */
XM_OPTION_CRC = 2, /* Transfer if different CRC or length */
XM_OPTION_APPEND = 3, /* Append to existing file, if any */
XM_OPTION_REPLACE = 4, /* Replace existing file */
XM_OPTION_NEW = 5, /* Transfer if source is newer */
XM_OPTION_DIFF = 6, /* Transfer if dates or lengths different */
XM_OPTION_CREATE = 7, /* Protect: transfer only if dest doesn't exist */
XM_OPTION_RENAME = 8 /* Change filename if destination exists */
};
/****************************************************************************
* Public Data
****************************************************************************/
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif
/****************************************************************************
* Public Function Prototypes
****************************************************************************/
/****************************************************************************
* Name: zmr_initialize
*
* Description:
* Initialize for Zmodem receive operation
*
* Input Parameters:
* remfd - The R/W file/socket descriptor to use for communication with the
* remote peer.
*
2013-07-13 21:19:15 +02:00
* Returned Value:
* An opaque handle that can be use with zmr_receive() and zmr_release().
*
****************************************************************************/
ZMRHANDLE zmr_initialize(int remfd);
2013-07-13 21:19:15 +02:00
/****************************************************************************
* Name: zmr_receive
*
* Description:
* Receive file(s) sent from the remote peer.
*
* Input Parameters:
* handle - The handler created by zmr_initialize().
* pathname - The name of the local path to hold the file
2013-07-13 21:19:15 +02:00
*
* Returned Value:
* Zero on success; a negated errno value on failure.
*
****************************************************************************/
int zmr_receive(ZMRHANDLE handle, FAR const char *pathname);
2013-07-13 21:19:15 +02:00
/****************************************************************************
* Name: zmr_release
*
* Description:
* Called by the user when there are no more files to receive.
*
2013-07-13 21:19:15 +02:00
* Input Parameters:
* handle - The handler created by zmr_initialize().
*
* Returned Value:
* Zero on success; a negated errno value on failure.
*
****************************************************************************/
int zmr_release(ZMRHANDLE);
/****************************************************************************
* Name: zms_initialize
*
* Description:
* Initialize for Zmodem send operation. The overall usage is as follows:
*
* 1) Call zms_initialize() to create the partially initialized struct
* zm_state_s instance.
* 2) Make any custom settings in the struct zms_state_s instance.
* 3) Create a stream instance to get the "file" to transmit and add
* the filename to pzms
* 4) Call zms_upload() to transfer the file.
* 5) Repeat 3) and 4) to transfer as many files as desired.
* 6) Call zms_release() when the final file has been transferred.
*
* Input Parameters:
* remfd - The R/W file/socket descriptor to use for communication with the
* remote peer.
*
2013-07-13 21:19:15 +02:00
* Returned Value:
* An opaque handle that can be use with zmx_send() and zms_release()
*
****************************************************************************/
ZMSHANDLE zms_initialize(int remfd);
/****************************************************************************
* Name: zms_send
*
* Description:
* Send a file.
*
* Input Parameters:
2013-07-13 21:19:15 +02:00
* handle - Handle previoulsy returned by xms_initialize()
* filename - The name of the local file to transfer
* rfilename - The name of the remote file name to create
2013-07-13 21:19:15 +02:00
* option - Describes optional transfer behavior
* f1 - The F1 transfer flags
* skip - True: Skip if file not present at receiving end.
*
* Returned Value:
* Zero on success; a negated errno value on failure.
*
****************************************************************************/
int zms_send(ZMSHANDLE handle, FAR const char *filename,
FAR const char *rfilename, enum zm_xfertype_e xfertype,
enum zm_option_e option, bool skip);
/****************************************************************************
* Name: zms_release
*
* Description:
* Called by the user when there are no more files to send.
*
2013-07-13 21:19:15 +02:00
* Input Parameters:
* handle - The handler created by zms_initialize().
*
* Returned Value:
* Zero on success; a negated errno value on failure.
*
****************************************************************************/
int zms_release(ZMSHANDLE handle);
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __APPS_INCLUDE_SYSTEM_ZMODEM_H */