nuttx-apps/graphics/ft80x/ft80x.h

/****************************************************************************
 * apps/graphics/ft80x/ft80x.h
 *
 *   Copyright (C) 2018 Gregory Nutt. All rights reserved.
 *   Author: Gregory Nutt <gnutt@nuttx.org>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 * 3. Neither the name NuttX nor the names of its contributors may be
 *    used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
 * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
 * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
 * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 ****************************************************************************/

#ifndef __APPS_GRAPHICS_FT80X_FT80X_H
#define __APPS_GRAPHICS_FT80X_FT80X_H

/****************************************************************************
 * Included Files
 ****************************************************************************/

#include <nuttx/config.h>
#include <nuttx/compiler.h>

#include <stdio.h>
#include <stdint.h>
#include <debug.h>

#ifdef CONFIG_GRAPHICS_FT80X

/****************************************************************************
 * Pre-processor Definitions
 ****************************************************************************/

/* NOTE: These rely on internal definitions from compiler.h and debug.h.
 * Could be a porting issue.
 */

#ifdef CONFIG_CPP_HAVE_VARARGS
#  ifdef CONFIG_GRAPHICS_FT80X_DEBUG_ERROR
#    define  ft80x_err(format, ...) \
       fprintf(stderr, EXTRA_FMT format EXTRA_ARG, ##__VA_ARGS__)
#  else
#    define  ft80x_err(format, ...)
#  endif

#  ifdef CONFIG_GRAPHICS_FT80X_DEBUG_WARN
#    define  ft80x_warn(format, ...) \
       fprintf(stderr, EXTRA_FMT format EXTRA_ARG, ##__VA_ARGS__)
#  else
#    define  ft80x_warn(format, ...)
#  endif

#  ifdef CONFIG_GRAPHICS_FT80X_DEBUG_INFO
#    define  ft80x_info(format, ...) \
       printf(EXTRA_FMT format EXTRA_ARG, ##__VA_ARGS__)
#  else
#    define  ft80x_info(format, ...)
#  endif
#else
#  ifdef CONFIG_GRAPHICS_FT80X_DEBUG_ERROR
#    define  ft80x_err printf
#  else
#    define  ft80x_err (void)
#  endif

#  ifdef CONFIG_GRAPHICS_FT80X_DEBUG_WARN
#    define  ft80x_warn printf
#  else
#    define  ft80x_warn (void)
#  endif

#  ifdef CONFIG_GRAPHICS_FT80X_DEBUG_INFO
#    define  ft80x_info printf
#  else
#    define  ft80x_info (void)
#  endif
#endif

#define FT80X_CMDFIFO_MASK  (FT80X_CMDFIFO_SIZE - 1)

/****************************************************************************
 * Public Types
 ****************************************************************************/

/****************************************************************************
 * Public Function Prototypes
 ****************************************************************************/

#ifdef __cplusplus
#define EXTERN extern "C"
extern "C"
{
#else
#define EXTERN extern
#endif

struct ft80x_dlbuffer_s;  /* Forward reference3 */

/****************************************************************************
 * Name: ft80x_getreg8/16/32
 *
 * Description:
 *   Read an 8-, 16-, or 32-bit FT80x register value.
 *
 * Input Parameters:
 *   fd     - The file descriptor of the FT80x device.  Opened by the caller
 *            with write access.
 *   addr   - The 32-bit aligned, 22-bit register value
 *   value  - The location to return the register value
 *
 * Returned Value:
 *   Zero (OK) on success.  A negated errno value on failure.
 *
 ****************************************************************************/

int ft80x_getreg8(int fd, uint32_t addr, FAR uint8_t *value);
int ft80x_getreg16(int fd, uint32_t addr, FAR uint16_t *value);
int ft80x_getreg32(int fd, uint32_t addr, FAR uint32_t *value);

/****************************************************************************
 * Name: ft80x_getregs
 *
 * Description:
 *   Read multiple 32-bit FT80x register values.
 *
 * Input Parameters:
 *   fd     - The file descriptor of the FT80x device.  Opened by the caller
 *            with write access.
 *   addr   - The 32-bit aligned, 22-bit start register address
 *   nregs  - The number of registers to read.
 *   value  - The location to return the register values
 *
 * Returned Value:
 *   Zero (OK) on success.  A negated errno value on failure.
 *
 ****************************************************************************/

int ft80x_getregs(int fd, uint32_t addr, uint8_t nregs, FAR uint32_t *value);

/****************************************************************************
 * Name: ft80x_putreg8/16/32
 *
 * Description:
 *   Wtite an 8-, 16-, or 32-bit FT80x register value.
 *
 * Input Parameters:
 *   fd     - The file descriptor of the FT80x device.  Opened by the caller
 *            with write access.
 *   addr   - The 32-bit aligned, 22-bit register value
 *   value  - The register value to write.
 *
 * Returned Value:
 *   Zero (OK) on success.  A negated errno value on failure.
 *
 ****************************************************************************/

int ft80x_putreg8(int fd, uint32_t addr, uint8_t value);
int ft80x_putreg16(int fd, uint32_t addr, uint16_t value);
int ft80x_putreg32(int fd, uint32_t addr, uint32_t value);

/****************************************************************************
 * Name: ft80x_putregs
 *
 * Description:
 *   Write multiple 32-bit FT80x register values.
 *
 * Input Parameters:
 *   fd     - The file descriptor of the FT80x device.  Opened by the caller
 *            with write access.
 *   addr   - The 32-bit aligned, 22-bit start register address
 *   nregs  - The number of registers to write.
 *   value  - The of the register values to be written.
 *
 * Returned Value:
 *   Zero (OK) on success.  A negated errno value on failure.
 *
 ****************************************************************************/

int ft80x_putregs(int fd, uint32_t addr, uint8_t nregs,
                  FAR const uint32_t *value);

/****************************************************************************
 * Name: ft80x_ramdl_rewind
 *
 * Description:
 *   Reset to the start of RAM DL memory
 *
 * Input Parameters:
 *   fd - The file descriptor of the FT80x device.  Opened by the caller
 *        with write access.
 *
 * Returned Value:
 *   Zero (OK) on success.  A negated errno value on failure.
 *
 ****************************************************************************/

int ft80x_ramdl_rewind(int fd);

/****************************************************************************
 * Name: ft80x_ramdl_append
 *
 * Description:
 *   Append new display list data to RAM DL
 *
 * Input Parameters:
 *   fd     - The file descriptor of the FT80x device.  Opened by the caller
 *            with write access.
 *   data   - A pointer to the start of the data to be written.
 *   len    - The number of bytes to be written.
 *
 * Returned Value:
 *   Zero (OK) on success.  A negated errno value on failure.
 *
 ****************************************************************************/

int ft80x_ramdl_append(int fd, FAR const void *data, size_t len);

/****************************************************************************
 * Name: ft80x_ramcmd_append
 *
 * Description:
 *   Append new display list data to RAM CMD
 *
 * Input Parameters:
 *   fd     - The file descriptor of the FT80x device.  Opened by the caller
 *            with write access.
 *   data   - A pointer to the start of the data to be append to RAM CMD.
 *   len    - The number of bytes to be appended.
 *
 * Returned Value:
 *   Zero (OK) on success.  A negated errno value on failure.
 *
 ****************************************************************************/

int ft80x_ramcmd_append(int fd, FAR const void *data, size_t len);

/****************************************************************************
 * Name: ft80x_ramcmd_freespace
 *
 * Description:
 *   Return the free space in RAM CMD memory
 *
 * Input Parameters:
 *   fd     - The file descriptor of the FT80x device.  Opened by the caller
 *            with write access.
 *   offset - Pointer to location to return the write offset to use if the
 *            FIFO is not full.
 *   avail  - Pointer to location to return the FIFO free space
 *
 * Returned Value:
 *   The (positive) number of free bytes in RAM CMD on success.  A negated
 *   errno value is returned on any failure.
 *
 ****************************************************************************/

uint16_t ft80x_ramcmd_freespace(int fd, FAR uint16_t *offset,
                                FAR uint16_t *avail);

/****************************************************************************
 * Name: ft80x_ramcmd_waitfifoempty
 *
 * Description:
 *   Wait until co processor completes the operation and the FIFO is again
 *   empty.
 *
 * Input Parameters:
 *   fd     - The file descriptor of the FT80x device.  Opened by the caller
 *            with write access.
 *
 * Returned Value:
 *   Zero (OK) on success.  A negated errno value on failure.
 *
 ****************************************************************************/

int ft80x_ramcmd_waitfifoempty(int fd);

/****************************************************************************
 * Name: ft80x_dl_swap
 *
 * Description:
 *   Perform the display swap operation.
 *
 * Input Parameters:
 *   fd     - The file descriptor of the FT80x device.  Opened by the caller
 *            with write access.
 *
 * Returned Value:
 *   Zero (OK) on success.  A negated errno value on failure.
 *
 ****************************************************************************/

int ft80x_dl_swap(int fd);

#undef EXTERN
#ifdef __cplusplus
}
#endif

#endif /* CONFIG_GRAPHICS_FT80X */
#endif /* __APPS_GRAPHICS_FT80X_FT80X_H */