sergiotarxz/nuttx-apps
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
d2b19602e9
nuttx-apps/examples/ft80x/ft80x_coprocessor.c

3921 lines
107 KiB
C
Raw Normal View History

Squashed commit of the following: apps/examples/ft80x: Add one display example. Many more are needed but this is enough to get started with testing (when I eventually have hardware). apps/examples/ft80x: Add the bare framework for a test of the FT80x
2018-02-18 23:54:11 +01:00
/****************************************************************************
* examples/ft80x/ft80x_coprocessor.c
*
* Copyright (C) 2018 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
Squashed commit of the following: apps/graphics/ft80x: Add support for accessing graphics ram. apps/examples/ft80x: Add more primitive graphics demos. apps/examples/ft80x: Add a couple more demos of primitives. Use new ft80x_dl_create() to simplify. apps/graphics/ft80x: Add ft80x_dl_create() which simplies writing of very simple display lists.
2018-02-19 20:14:16 +01:00
* Derives from FTDI sample code which appears to have an unrestricted
* license. Re-released here under the BSD 3-clause license:
*
Squashed commit of the following: apps/examples/ft80x: Add one display example. Many more are needed but this is enough to get started with testing (when I eventually have hardware). apps/examples/ft80x: Add the bare framework for a test of the FT80x
2018-02-18 23:54:11 +01:00
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <errno.h>
#include <nuttx/lcd/ft80x.h>
#include "graphics/ft80x.h"
#include "ft80x.h"
/****************************************************************************
* Public Functions
****************************************************************************/
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 21:32:20 +01:00
/****************************************************************************
* Name: ft80x_coproc_button
*
* Description:
* Demonstrate the button functionality
*
****************************************************************************/
int ft80x_coproc_button(int fd, FAR struct ft80x_dlbuffer_s *buffer)
{
int16_t xoffset;
int16_t yoffset;
int16_t width;
int16_t height;
int16_t xdist;
int16_t ydist;
int ret;
/* Formatted output chunks */
union
{
struct
{
struct ft80x_cmd32_s clearrgb;
struct ft80x_cmd32_s clear;
struct ft80x_cmd32_s colorrgb;
} a;
struct
{
struct ft80x_cmd_fgcolor_s fgcolor;
struct ft80x_cmd_button_s button;
} b;
struct
{
struct ft80x_cmd_fgcolor_s fgcolor;
struct ft80x_cmd_gradcolor_s gradcolor;
struct ft80x_cmd_button_s button;
} c;
struct
{
struct ft80x_cmd_gradcolor_s gradcolor;
struct ft80x_cmd_button_s button;
} d;
struct ft80x_cmd_button_s button;
struct ft80x_cmd_text_s text;
} cmds;
/* Create the hardware display list */
ret = ft80x_dl_start(fd, buffer, true);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_start failed: %d\n", ret);
return ret;
}
cmds.a.clearrgb.cmd = FT80X_CLEAR_COLOR_RGB(64, 64, 64);
cmds.a.clear.cmd = FT80X_CLEAR(1 ,1, 1);
cmds.a.colorrgb.cmd = FT80X_COLOR_RGB(0xff, 0xff, 0xff);
/* Copy the commands into the display list */
ret = ft80x_dl_data(fd, buffer, &cmds.a, sizeof(cmds.a));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
width = 60;
height = 30;
xdist = width + (FT80X_DISPLAY_WIDTH - 4 * width) / 5;
ydist = height + 5;
xoffset = 10;
yoffset = FT80X_DISPLAY_HEIGHT / 2 - 2 * ydist;
/* Construct a buttons with "ONE/TWO/THREE" text and default background */
/* Draw buttons 60x30 resolution at 10x40,10x75,10x110 */
/* Flat effect and default color background */
cmds.b.fgcolor.cmd = FT80X_CMD_FGCOLOR;
cmds.b.fgcolor.c = 0x0000ff;
cmds.b.button.cmd = FT80X_CMD_BUTTON;
cmds.b.button.x = xoffset;
cmds.b.button.y = yoffset;
cmds.b.button.w = width;
cmds.b.button.h = height;
cmds.b.button.font = 28;
cmds.b.button.options = FT80X_OPT_FLAT;
ret = ft80x_dl_data(fd, buffer, &cmds.b, sizeof(cmds.b));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "ABC");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
yoffset += ydist;
cmds.button.cmd = FT80X_CMD_BUTTON;
cmds.button.x = xoffset;
cmds.button.y = yoffset;
cmds.button.w = width;
cmds.button.h = height;
cmds.button.font = 28;
cmds.button.options = FT80X_OPT_FLAT;
ret = ft80x_dl_data(fd, buffer, &cmds.button, sizeof(cmds.button));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "ABC");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
yoffset += ydist;
cmds.button.y = yoffset;
ret = ft80x_dl_data(fd, buffer, &cmds.button, sizeof(cmds.button));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "ABC");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
cmds.text.cmd = FT80X_CMD_TEXT;
cmds.text.x = 20;
cmds.text.y = 40;
cmds.text.font = 26;
cmds.text.options = 0;
ret = ft80x_dl_data(fd, buffer, &cmds.text, sizeof(cmds.text));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "Flat effect");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* 3D effect */
xoffset += xdist;
yoffset = FT80X_DISPLAY_HEIGHT / 2 - 2 * ydist;
cmds.button.cmd = FT80X_CMD_BUTTON;
cmds.button.x = xoffset;
cmds.button.y = yoffset;
cmds.button.w = width;
cmds.button.h = height;
cmds.button.font = 28;
cmds.button.options = 0;
ret = ft80x_dl_data(fd, buffer, &cmds.button, sizeof(cmds.button));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "ABC");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
yoffset += ydist;
cmds.button.y = yoffset;
ret = ft80x_dl_data(fd, buffer, &cmds.button, sizeof(cmds.button));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "ABC");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
yoffset += ydist;
cmds.button.y = yoffset;
ret = ft80x_dl_data(fd, buffer, &cmds.button, sizeof(cmds.button));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "ABC");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
yoffset += ydist;
cmds.button.y = yoffset;
ret = ft80x_dl_data(fd, buffer, &cmds.button, sizeof(cmds.button));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "ABC");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
cmds.text.cmd = FT80X_CMD_TEXT;
cmds.text.x = xoffset;
cmds.text.y = yoffset + 40;
cmds.text.font = 26;
cmds.text.options = 0;
ret = ft80x_dl_data(fd, buffer, &cmds.text, sizeof(cmds.text));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "3D Effect");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* 3d effect with background color */
xoffset += xdist;
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 22:42:47 +01:00
yoffset = FT80X_DISPLAY_HEIGHT/ 2 - 2 * ydist;
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 21:32:20 +01:00
cmds.b.fgcolor.cmd = FT80X_CMD_FGCOLOR;
cmds.b.fgcolor.c = 0xffff00;
cmds.b.button.cmd = FT80X_CMD_BUTTON;
cmds.b.button.x = xoffset;
cmds.b.button.y = yoffset;
cmds.b.button.w = width;
cmds.b.button.h = height;
cmds.b.button.font = 28;
cmds.b.button.options = 0;
ret = ft80x_dl_data(fd, buffer, &cmds.b, sizeof(cmds.b));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "ABC");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
yoffset += ydist;
cmds.b.fgcolor.c = 0xffff00;
cmds.b.button.y = yoffset;
ret = ft80x_dl_data(fd, buffer, &cmds.b, sizeof(cmds.b));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "ABC");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
yoffset += ydist;
cmds.b.fgcolor.c = 0xff00ff;
cmds.b.button.y = yoffset;
ret = ft80x_dl_data(fd, buffer, &cmds.b, sizeof(cmds.b));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "ABC");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
cmds.text.cmd = FT80X_CMD_TEXT;
cmds.text.x = xoffset;
cmds.text.y = yoffset + 40;
cmds.text.font = 26;
cmds.text.options = 0;
ret = ft80x_dl_data(fd, buffer, &cmds.text, sizeof(cmds.text));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "3D Color");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* 3d effect with gradient color */
xoffset += xdist;
yoffset = FT80X_DISPLAY_HEIGHT / 2 - 2 * ydist;
cmds.c.fgcolor.cmd = FT80X_CMD_FGCOLOR;
cmds.c.fgcolor.c = 0x101010;
cmds.c.gradcolor.cmd = FT80X_CMD_GRADCOLOR;
cmds.c.gradcolor.c = 0xff0000;
cmds.c.button.cmd = FT80X_CMD_BUTTON;
cmds.c.button.x = xoffset;
cmds.c.button.y = yoffset;
cmds.c.button.w = width;
cmds.c.button.h = height;
cmds.c.button.font = 28;
cmds.c.button.options = 0;
ret = ft80x_dl_data(fd, buffer, &cmds.c, sizeof(cmds.c));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "ABC");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
yoffset += ydist;
cmds.d.gradcolor.cmd = FT80X_CMD_GRADCOLOR;
cmds.d.gradcolor.c = 0x00ff00;
cmds.d.button.cmd = FT80X_CMD_BUTTON;
cmds.d.button.x = xoffset;
cmds.d.button.y = yoffset;
cmds.d.button.w = width;
cmds.d.button.h = height;
cmds.d.button.font = 28;
cmds.d.button.options = 0;
ret = ft80x_dl_data(fd, buffer, &cmds.d, sizeof(cmds.d));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "ABC");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
yoffset += ydist;
cmds.d.gradcolor.c = 0x0000ff;
cmds.d.button.y = yoffset;
ret = ft80x_dl_data(fd, buffer, &cmds.d, sizeof(cmds.d));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "ABC");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
cmds.text.cmd = FT80X_CMD_TEXT;
cmds.text.x = xoffset;
cmds.text.y = yoffset + 40;
cmds.text.font = 26;
cmds.text.options = 0;
ret = ft80x_dl_data(fd, buffer, &cmds.text, sizeof(cmds.text));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "3D Gradient");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* Finally, terminate the display list */
ret = ft80x_dl_end(fd, buffer);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_end failed: %d\n", ret);
}
return ret;
}
apps/examples/ft80x: Add two more coprocessor demos: clock and gauge.
2018-02-22 19:30:58 +01:00
/****************************************************************************
* Name: ft80x_coproc_clock
*
* Description:
* Demonstrate the clock widget
*
****************************************************************************/
int ft80x_coproc_clock(int fd, FAR struct ft80x_dlbuffer_s *buffer)
{
FAR const struct ft80x_bitmaphdr_s *bmhdr = &g_lenaface_bmhdr;
int16_t xoffset;
int16_t yoffset;
int16_t radius;
int16_t xdist;
int ret;
/* Formatted output chunks */
union
{
struct
{
struct ft80x_cmd32_s clearrgb;
struct ft80x_cmd32_s clear;
struct ft80x_cmd32_s colorrgb;
} a;
struct
{
struct ft80x_cmd_bgcolor_s bgcolor;
struct ft80x_cmd32_s colorrgb;
struct ft80x_cmd_clock_s clock;
struct ft80x_cmd_text_s text;
} b;
struct
{
struct ft80x_cmd_bgcolor_s bgcolor;
struct ft80x_cmd32_s colorrgb;
struct ft80x_cmd_fgcolor_s fgcolor;
struct ft80x_cmd_clock_s clock;
struct ft80x_cmd32_s colora;
struct ft80x_cmd_text_s text;
} c;
struct
{
struct ft80x_cmd32_s colorrgb;
struct ft80x_cmd_clock_s clock;
} d;
struct
{
struct ft80x_cmd32_s linewidth;
struct ft80x_cmd32_s colorrgb1;
struct ft80x_cmd32_s begin1;
struct ft80x_cmd32_s vertex2f1;
struct ft80x_cmd32_s vertex2f2;
struct ft80x_cmd32_s end1;
struct ft80x_cmd32_s colora;
struct ft80x_cmd32_s colorrgb2;
struct ft80x_cmd32_s colormask1;
struct ft80x_cmd32_s clear;
struct ft80x_cmd32_s begin2;
struct ft80x_cmd32_s vertex2f3;
struct ft80x_cmd32_s vertex2f4;
struct ft80x_cmd32_s end2;
struct ft80x_cmd32_s colormask2;
struct ft80x_cmd32_s blend;
} e;
struct
{
struct ft80x_cmd_loadidentity_s loadidentity1;
struct ft80x_cmd_scale_s scale;
struct ft80x_cmd_setmatrix_s setmatrix1;
struct ft80x_cmd32_s begin;
struct ft80x_cmd32_s bitmapsource;
struct ft80x_cmd32_s bitmaplayout;
struct ft80x_cmd32_s bitmapsize;
struct ft80x_cmd32_s vertex2f;
struct ft80x_cmd32_s end;
struct ft80x_cmd32_s blend;
struct ft80x_cmd_loadidentity_s loadidentity2;
struct ft80x_cmd_setmatrix_s setmatrix2;
struct ft80x_cmd32_s colorrgb;
struct ft80x_cmd_clock_s clock;
} f;
} cmds;
xdist = FT80X_DISPLAY_WIDTH / 5;
radius = xdist / 2 - FT80X_DISPLAY_WIDTH / 64;
/* Copy the image into graphics ram for the Lena faced clock */
ret = ft80x_ramg_write(fd, 0, bmhdr->data, bmhdr->stride * bmhdr->height);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_ramg_write() failed: %d\n", ret);
return ret;
}
/* Create the hardware display list */
ret = ft80x_dl_start(fd, buffer, true);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_start failed: %d\n", ret);
return ret;
}
cmds.a.clearrgb.cmd = FT80X_CLEAR_COLOR_RGB(64, 64, 64);
cmds.a.clear.cmd = FT80X_CLEAR(1 ,1, 1);
cmds.a.colorrgb.cmd = FT80X_COLOR_RGB(0xff, 0xff, 0xff);
/* Copy the commands into the display list */
ret = ft80x_dl_data(fd, buffer, &cmds.a, sizeof(cmds.a));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
/* Draw clock with blue as background and read as needle color */
/* Flat effect and default color background */
xoffset = xdist / 2;
yoffset = radius + 5;
cmds.b.bgcolor.cmd = FT80X_CMD_BGCOLOR; /* Background color */
cmds.b.bgcolor.c = 0x0000ff;
cmds.b.colorrgb.cmd = FT80X_COLOR_RGB(0xff, 0x00, 0x00);
cmds.b.clock.cmd = FT80X_CMD_CLOCK; /* Clock */
cmds.b.clock.x = xoffset;
cmds.b.clock.y = yoffset;
cmds.b.clock.r = radius;
cmds.b.clock.options = FT80X_OPT_FLAT;
cmds.b.clock.h = 30;
cmds.b.clock.m = 100;
cmds.b.clock.s = 5;
cmds.b.clock.ms = 10;
cmds.b.text.cmd = FT80X_CMD_TEXT; /* Text */
cmds.b.text.x = xoffset;
cmds.b.text.y = yoffset + radius + 6;
cmds.b.text.font = 26;
cmds.b.text.options = FT80X_OPT_CENTER;
ret = ft80x_dl_data(fd, buffer, &cmds.b, sizeof(cmds.b));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "Flat effect");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* No seconds needle */
xoffset += xdist;
cmds.c.bgcolor.cmd = FT80X_CMD_BGCOLOR; /* Background color */
cmds.c.bgcolor.c = 0x00ff00;
cmds.c.colorrgb.cmd = FT80X_COLOR_RGB(0xff, 0x00, 0x00);
cmds.c.fgcolor.cmd = FT80X_CMD_FGCOLOR;
cmds.c.fgcolor.c = 0xff0000;
cmds.c.clock.cmd = FT80X_CMD_CLOCK; /* Clock */
cmds.c.clock.x = xoffset;
cmds.c.clock.y = yoffset;
cmds.c.clock.r = radius;
cmds.c.clock.options = FT80X_OPT_NOSECS;
cmds.c.clock.h = 10;
cmds.c.clock.m = 10;
cmds.c.clock.s = 5;
cmds.c.clock.ms = 10;
cmds.c.colora.cmd = FT80X_COLOR_A(255); /* Color A */
cmds.c.text.cmd = FT80X_CMD_TEXT; /* Text */
cmds.c.text.x = xoffset;
cmds.c.text.y = yoffset + radius + 6;
cmds.c.text.font = 26;
cmds.c.text.options = FT80X_OPT_CENTER;
ret = ft80x_dl_data(fd, buffer, &cmds.c, sizeof(cmds.c));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "No Secs");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* No background color */
xoffset += xdist;
cmds.b.bgcolor.cmd = FT80X_CMD_BGCOLOR; /* Background color */
cmds.b.bgcolor.c = 0x00ffff;
cmds.b.colorrgb.cmd = FT80X_COLOR_RGB(0xff, 0xff, 0x00);
cmds.b.clock.cmd = FT80X_CMD_CLOCK; /* Clock */
cmds.b.clock.x = xoffset;
cmds.b.clock.y = yoffset;
cmds.b.clock.r = radius;
cmds.b.clock.options = FT80X_OPT_NOBACK;
cmds.b.clock.h = 10;
cmds.b.clock.m = 10;
cmds.b.clock.s = 5;
cmds.b.clock.ms = 10;
cmds.b.text.cmd = FT80X_CMD_TEXT; /* Text */
cmds.b.text.x = xoffset;
cmds.b.text.y = yoffset + radius + 6;
cmds.b.text.font = 26;
cmds.b.text.options = FT80X_OPT_CENTER;
ret = ft80x_dl_data(fd, buffer, &cmds.b, sizeof(cmds.b));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "No BG");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* No ticks */
xoffset += xdist;
cmds.b.bgcolor.c = 0xff00ff;
cmds.b.colorrgb.cmd = FT80X_COLOR_RGB(0x00, 0xff, 0xff);
cmds.b.clock.x = xoffset;
cmds.b.clock.options = FT80X_OPT_NOTICKS;
cmds.b.text.x = xoffset;
ret = ft80x_dl_data(fd, buffer, &cmds.b, sizeof(cmds.b));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "No Ticks");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* No hands */
xoffset += xdist;
cmds.b.bgcolor.c = 0x808080;
cmds.b.colorrgb.cmd = FT80X_COLOR_RGB(0x00, 0xff, 0x00);
cmds.b.clock.x = xoffset;
cmds.b.clock.options = FT80X_OPT_NOHANDS;
cmds.b.text.x = xoffset;
ret = ft80x_dl_data(fd, buffer, &cmds.b, sizeof(cmds.b));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "No Hands");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* Bigger clock */
yoffset += radius + 10;
radius = FT80X_DISPLAY_HEIGHT - (2 * radius + 5 + 10);
radius = (radius - 5 - 20) / 2;
xoffset = radius + 10;
yoffset += radius + 5;
cmds.d.colorrgb.cmd = FT80X_COLOR_RGB(0x00, 0x00, 0xff);
cmds.d.clock.cmd = FT80X_CMD_CLOCK; /* Clock */
cmds.d.clock.x = xoffset;
cmds.d.clock.y = yoffset;
cmds.d.clock.r = radius;
cmds.d.clock.options = 0;
cmds.d.clock.h = 10;
cmds.d.clock.m = 10;
cmds.d.clock.s = 5;
cmds.d.clock.ms = 10;
ret = ft80x_dl_data(fd, buffer, &cmds.d, sizeof(cmds.d));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
/* Lena clock with no background and no ticks */
xoffset += 2 * radius + 10;
cmds.e.linewidth.cmd = FT80X_LINE_WIDTH(10 * 16);
cmds.e.colorrgb1.cmd = FT80X_COLOR_RGB(0xff, 0xff, 0xff);
cmds.e.begin1.cmd = FT80X_BEGIN(FT80X_PRIM_RECTS);
cmds.e.vertex2f1.cmd = FT80X_VERTEX2F((xoffset - radius + 10) * 16,
(yoffset - radius + 10) * 16);
cmds.e.vertex2f2.cmd = FT80X_VERTEX2F((xoffset + radius - 10) * 16,
(yoffset + radius - 10) * 16);
cmds.e.end1.cmd = FT80X_END();
cmds.e.colora.cmd = FT80X_COLOR_A(0xff);
cmds.e.colorrgb2.cmd = FT80X_COLOR_RGB(0xff,0xff,0xff);
cmds.e.colormask1.cmd = FT80X_COLOR_MASK(0, 0, 0, 1);
cmds.e.clear.cmd = FT80X_CLEAR(1, 1, 1);
cmds.e.begin2.cmd = FT80X_BEGIN(FT80X_PRIM_RECTS);
cmds.e.vertex2f3.cmd = FT80X_VERTEX2F((xoffset - radius + 12) * 16,
(yoffset - radius + 12) * 16);
cmds.e.vertex2f4.cmd = FT80X_VERTEX2F((xoffset + radius - 12) * 16,
(yoffset + radius - 12) * 16);
cmds.e.end2.cmd = FT80X_END();
cmds.e.colormask2.cmd = FT80X_COLOR_MASK(1, 1, 1, 1);
cmds.e.blend.cmd = FT80X_BLEND_FUNC(FT80X_BLEND_DST_ALPHA,
FT80X_BLEND_ONE_MINUS_DST_ALPHA);
ret = ft80x_dl_data(fd, buffer, &cmds.e, sizeof(cmds.e));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
/* Lena bitmap - scale proportionately wrt output resolution */
cmds.f.loadidentity1.cmd = FT80X_CMD_LOADIDENTITY;
cmds.f.scale.cmd = FT80X_CMD_SCALE;
cmds.f.scale.sx = (65536 * 2 * radius) / bmhdr->width;
cmds.f.scale.sy = (65536 * 2 * radius) / bmhdr->height;
cmds.f.setmatrix1.cmd = FT80X_CMD_SETMATRIX;
cmds.f.begin.cmd = FT80X_BEGIN(FT80X_PRIM_BITMAPS);;
cmds.f.bitmapsource.cmd = FT80X_BITMAP_SOURCE(0);
cmds.f.bitmaplayout.cmd = FT80X_BITMAP_LAYOUT(bmhdr->format, bmhdr->stride,
bmhdr->height);
cmds.f.bitmapsize.cmd = FT80X_BITMAP_SIZE(FT80X_FILTER_BILINEAR,
FT80X_WRAP_BORDER,
FT80X_WRAP_BORDER,
2 * radius, 2 * radius);
cmds.f.vertex2f.cmd = FT80X_VERTEX2F((xoffset - radius) * 16,
(yoffset - radius) * 16);
cmds.f.end.cmd = FT80X_END();
cmds.f.blend.cmd = FT80X_BLEND_FUNC(FT80X_BLEND_SRC_ALPHA,
FT80X_BLEND_ONE_MINUS_SRC_ALPHA);
cmds.f.loadidentity2.cmd = FT80X_CMD_LOADIDENTITY;
cmds.f.setmatrix2.cmd = FT80X_CMD_SETMATRIX;
cmds.f.colorrgb.cmd = FT80X_COLOR_RGB(0xff, 0xff, 0xff);
cmds.f.clock.cmd = FT80X_CMD_CLOCK; /* Clock */
cmds.f.clock.x = xoffset;
cmds.f.clock.y = yoffset;
cmds.f.clock.r = radius;
cmds.f.clock.options = FT80X_OPT_NOTICKS | FT80X_OPT_NOBACK;
cmds.f.clock.h = 10;
cmds.f.clock.m = 10;
cmds.f.clock.s = 5;
cmds.f.clock.ms = 10;
ret = ft80x_dl_data(fd, buffer, &cmds.f, sizeof(cmds.f));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
/* Finally, terminate the display list */
ret = ft80x_dl_end(fd, buffer);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_end failed: %d\n", ret);
}
return ret;
}
/****************************************************************************
* Name: ft80x_coproc_gauge
*
* Description:
* Demonstrate the gauge widget
*
****************************************************************************/
int ft80x_coproc_gauge(int fd, FAR struct ft80x_dlbuffer_s *buffer)
{
FAR const struct ft80x_bitmaphdr_s *bmhdr = &g_lenaface_bmhdr;
int16_t xoffset;
int16_t yoffset;
int16_t radius;
int16_t xdist;
int ret;
/* Formatted output chunks */
union
{
struct
{
struct ft80x_cmd32_s clearrgb;
struct ft80x_cmd32_s clear;
struct ft80x_cmd32_s colorrgb;
} a;
struct
{
struct ft80x_cmd_bgcolor_s bgcolor;
struct ft80x_cmd32_s colorrgb;
struct ft80x_cmd_gauge_s gauge;
struct ft80x_cmd_text_s text;
} b;
struct
{
struct ft80x_cmd_bgcolor_s bgcolor;
struct ft80x_cmd32_s colorrgb;
struct ft80x_cmd_fgcolor_s fgcolor;
struct ft80x_cmd_gauge_s gauge;
struct ft80x_cmd_text_s text;
} c;
struct
{
struct ft80x_cmd_bgcolor_s bgcolor;
struct ft80x_cmd32_s colorrgb;
struct ft80x_cmd_gauge_s gauge;
struct ft80x_cmd32_s colora;
struct ft80x_cmd_text_s text;
} d;
struct
{
struct ft80x_cmd_bgcolor_s bgcolor;
struct ft80x_cmd32_s colorrgb1;
struct ft80x_cmd_gauge_s gauge1;
struct ft80x_cmd32_s colorrgb2;
struct ft80x_cmd_gauge_s gauge2;
} e;
struct
{
struct ft80x_cmd32_s pointsize1;
struct ft80x_cmd32_s colorrgb1;
struct ft80x_cmd32_s begin1;
struct ft80x_cmd32_s vertex2f1;
struct ft80x_cmd32_s end1;
struct ft80x_cmd32_s colora;
struct ft80x_cmd32_s colorrgb2;
struct ft80x_cmd32_s colormask1;
struct ft80x_cmd32_s clear;
struct ft80x_cmd32_s begin2;
struct ft80x_cmd32_s pointsize2;
struct ft80x_cmd32_s vertex2f2;
struct ft80x_cmd32_s end2;
struct ft80x_cmd32_s colormask2;
struct ft80x_cmd32_s blend;
} f;
struct
{
struct ft80x_cmd_loadidentity_s loadidentity1;
struct ft80x_cmd_scale_s scale;
struct ft80x_cmd_setmatrix_s setmatrix1;
struct ft80x_cmd32_s begin;
struct ft80x_cmd32_s bitmapsource;
struct ft80x_cmd32_s bitmaplayout;
struct ft80x_cmd32_s bitmapsize;
struct ft80x_cmd32_s vertex2f;
struct ft80x_cmd32_s end;
struct ft80x_cmd32_s blend;
struct ft80x_cmd_loadidentity_s loadidentity2;
struct ft80x_cmd_setmatrix_s setmatrix2;
struct ft80x_cmd32_s colorrgb;
struct ft80x_cmd_gauge_s gauge;
} g;
} cmds;
xdist = FT80X_DISPLAY_WIDTH / 5;
radius = xdist / 2 - FT80X_DISPLAY_WIDTH / 64;
/* Copy the image into graphics ram for the Lena faced gauge */
ret = ft80x_ramg_write(fd, 0, bmhdr->data, bmhdr->stride * bmhdr->height);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_ramg_write() failed: %d\n", ret);
return ret;
}
/* Create the hardware display list */
ret = ft80x_dl_start(fd, buffer, true);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_start failed: %d\n", ret);
return ret;
}
cmds.a.clearrgb.cmd = FT80X_CLEAR_COLOR_RGB(64, 64, 64);
cmds.a.clear.cmd = FT80X_CLEAR(1 ,1, 1);
cmds.a.colorrgb.cmd = FT80X_COLOR_RGB(0xff, 0xff, 0xff);
/* Copy the commands into the display list */
ret = ft80x_dl_data(fd, buffer, &cmds.a, sizeof(cmds.a));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
/* Draw gauge with blue as background and read as needle color */
/* Flat effect and default color background */
xoffset = xdist / 2;
yoffset = radius + 5;
cmds.b.bgcolor.cmd = FT80X_CMD_BGCOLOR; /* Background color */
cmds.b.bgcolor.c = 0x0000ff;
cmds.b.colorrgb.cmd = FT80X_COLOR_RGB(0xff, 0x00, 0x00);
cmds.b.gauge.cmd = FT80X_CMD_GAUGE; /* Gauge */
cmds.b.gauge.x = xoffset;
cmds.b.gauge.y = yoffset;
cmds.b.gauge.r = radius;
cmds.b.gauge.options = FT80X_OPT_FLAT;
cmds.b.gauge.major = 5;
cmds.b.gauge.minor = 4;
cmds.b.gauge.val = 45;
cmds.b.gauge.range = 100;
cmds.b.text.cmd = FT80X_CMD_TEXT; /* Text */
cmds.b.text.x = xoffset;
cmds.b.text.y = yoffset + radius + 6;
cmds.b.text.font = 26;
cmds.b.text.options = FT80X_OPT_CENTER;
ret = ft80x_dl_data(fd, buffer, &cmds.b, sizeof(cmds.b));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "Flat effect");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* 3d effect */
xoffset += xdist;
cmds.c.bgcolor.cmd = FT80X_CMD_BGCOLOR; /* Background color */
cmds.c.bgcolor.c = 0x0000ff;
cmds.c.colorrgb.cmd = FT80X_COLOR_RGB(0xff, 0x00, 0x00);
cmds.c.bgcolor.cmd = FT80X_CMD_FGCOLOR; /* Foreground color */
cmds.c.bgcolor.c = 0xff0000;
cmds.c.gauge.cmd = FT80X_CMD_GAUGE; /* Gauge */
cmds.c.gauge.x = xoffset;
cmds.c.gauge.y = yoffset;
cmds.c.gauge.r = radius;
cmds.c.gauge.options = 0;
cmds.c.gauge.major = 5;
cmds.c.gauge.minor = 1;
cmds.c.gauge.val = 60;
cmds.c.gauge.range = 100;
cmds.c.text.cmd = FT80X_CMD_TEXT; /* Text */
cmds.c.text.x = xoffset;
cmds.c.text.y = yoffset + radius + 6;
cmds.c.text.font = 26;
cmds.c.text.options = FT80X_OPT_CENTER;
ret = ft80x_dl_data(fd, buffer, &cmds.c, sizeof(cmds.c));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "3d effect");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* no background color */
xoffset += xdist;
cmds.d.bgcolor.cmd = FT80X_CMD_BGCOLOR; /* Background color */
cmds.d.bgcolor.c = 0x00ffff;
cmds.d.colorrgb.cmd = FT80X_COLOR_RGB(0xff, 0xff, 0x00);
cmds.d.gauge.cmd = FT80X_CMD_GAUGE; /* Gauge */
cmds.d.gauge.x = xoffset;
cmds.d.gauge.y = yoffset;
cmds.d.gauge.r = radius;
cmds.d.gauge.options = FT80X_OPT_NOBACK;
cmds.d.gauge.major = 1;
cmds.d.gauge.minor = 6;
cmds.d.gauge.val = 90;
cmds.d.gauge.range = 100;
cmds.d.colora.cmd = FT80X_COLOR_A(255);
cmds.d.text.cmd = FT80X_CMD_TEXT; /* Text */
cmds.d.text.x = xoffset;
cmds.d.text.y = yoffset + radius + 6;
cmds.d.text.font = 26;
cmds.d.text.options = FT80X_OPT_CENTER;
ret = ft80x_dl_data(fd, buffer, &cmds.d, sizeof(cmds.d));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "No BG");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* No ticks */
xoffset += xdist;
cmds.b.bgcolor.cmd = FT80X_CMD_BGCOLOR; /* Background color */
cmds.b.bgcolor.c = 0xff00ff;
cmds.b.colorrgb.cmd = FT80X_COLOR_RGB(0x00,0xff,0xff);
cmds.b.gauge.cmd = FT80X_CMD_GAUGE; /* Gauge */
cmds.b.gauge.x = xoffset;
cmds.b.gauge.y = yoffset;
cmds.b.gauge.r = radius;
cmds.b.gauge.options = FT80X_OPT_NOTICKS;
cmds.b.gauge.major = 5;
cmds.b.gauge.minor = 4;
cmds.b.gauge.val = 20;
cmds.b.gauge.range = 100;
cmds.b.text.cmd = FT80X_CMD_TEXT; /* Text */
cmds.b.text.x = xoffset;
cmds.b.text.y = yoffset + radius + 6;
cmds.b.text.font = 26;
cmds.b.text.options = FT80X_OPT_CENTER;
ret = ft80x_dl_data(fd, buffer, &cmds.b, sizeof(cmds.b));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "No Ticks");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* No hands */
xoffset += xdist;
cmds.d.bgcolor.cmd = FT80X_CMD_BGCOLOR; /* Background color */
cmds.d.bgcolor.c = 0x808080;
cmds.d.colorrgb.cmd = FT80X_COLOR_RGB(0x00, 0xff, 0x00);
cmds.d.gauge.cmd = FT80X_CMD_GAUGE; /* Gauge */
cmds.d.gauge.x = xoffset;
cmds.d.gauge.y = yoffset;
cmds.d.gauge.r = radius;
cmds.d.gauge.options = FT80X_OPT_NOHANDS;
cmds.d.gauge.major = 5;
cmds.d.gauge.minor = 4;
cmds.d.gauge.val = 55;
cmds.d.gauge.range = 100;
cmds.d.colora.cmd = FT80X_COLOR_A(255);
cmds.d.text.cmd = FT80X_CMD_TEXT; /* Text */
cmds.d.text.x = xoffset;
cmds.d.text.y = yoffset + radius + 6;
cmds.d.text.font = 26;
cmds.d.text.options = FT80X_OPT_CENTER;
ret = ft80x_dl_data(fd, buffer, &cmds.d, sizeof(cmds.d));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "No Hands");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* Bigger gauge */
yoffset += radius + 10;
radius = FT80X_DISPLAY_HEIGHT - ( 2 *radius + 5 + 10);
radius = (radius - 5 - 20) / 2;
xoffset = radius + 10;
yoffset += radius + 5;
cmds.e.bgcolor.cmd = FT80X_CMD_BGCOLOR; /* Background color */
cmds.e.bgcolor.c = 0x808000;
cmds.e.colorrgb1.cmd = FT80X_COLOR_RGB(0xff, 0xff, 0xff);
cmds.e.gauge1.cmd = FT80X_CMD_GAUGE; /* Gauge */
cmds.e.gauge1.x = xoffset;
cmds.e.gauge1.y = yoffset;
cmds.e.gauge1.r = radius;
cmds.e.gauge1.options = FT80X_OPT_NOPOINTER;
cmds.e.gauge1.major = 5;
cmds.e.gauge1.minor = 4;
cmds.e.gauge1.val = 80;
cmds.e.gauge1.range = 100;
cmds.e.colorrgb2.cmd = FT80X_COLOR_RGB(0xff, 0x00, 0x00);
cmds.e.gauge2.cmd = FT80X_CMD_GAUGE; /* Gauge */
cmds.e.gauge2.x = xoffset;
cmds.e.gauge2.y = yoffset;
cmds.e.gauge2.r = radius;
cmds.e.gauge2.options = FT80X_OPT_NOTICKS;
cmds.e.gauge2.major = 5;
cmds.e.gauge2.minor = 4;
cmds.e.gauge2.val = 30;
cmds.e.gauge2.range = 100;
ret = ft80x_dl_data(fd, buffer, &cmds.e, sizeof(cmds.e));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
/* Lena gauge with no background and no ticks */
xoffset += 2 * radius + 10;
cmds.f.pointsize1.cmd = FT80X_POINT_SIZE(radius * 16);
cmds.f.colorrgb1.cmd = FT80X_COLOR_RGB(0xff, 0xff, 0xff);
cmds.f.begin1.cmd = FT80X_BEGIN(FT80X_PRIM_POINTS);
cmds.f.vertex2f1.cmd = FT80X_VERTEX2F(xoffset * 16, yoffset * 16);
cmds.f.end1.cmd = FT80X_END();
cmds.f.colora.cmd = FT80X_COLOR_A(0xff);
cmds.f.colorrgb2.cmd = FT80X_COLOR_RGB(0xff, 0xff, 0xff);
cmds.f.colormask1.cmd = FT80X_COLOR_MASK(0, 0, 0, 1);
cmds.f.clear.cmd = FT80X_CLEAR(1, 1, 1);
cmds.f.begin2.cmd = FT80X_BEGIN(FT80X_PRIM_POINTS);
cmds.f.pointsize2.cmd = FT80X_POINT_SIZE((radius - 2) * 16);
cmds.f.vertex2f2.cmd = FT80X_VERTEX2F(xoffset * 16, yoffset * 16);
cmds.f.end2.cmd = FT80X_END();
cmds.f.colormask2.cmd = FT80X_COLOR_MASK(1, 1, 1, 1);
cmds.f.blend.cmd = FT80X_BLEND_FUNC(FT80X_BLEND_DST_ALPHA,
FT80X_BLEND_ONE_MINUS_DST_ALPHA);
ret = ft80x_dl_data(fd, buffer, &cmds.f, sizeof(cmds.f));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
/* Lena bitmap - scale proportionately wrt output resolution */
cmds.g.loadidentity1.cmd = FT80X_CMD_LOADIDENTITY;
cmds.g.scale.cmd = FT80X_CMD_SCALE;
cmds.g.scale.sx = (65536 * 2 * radius) / bmhdr->width;
cmds.g.scale.sy = (65536 * 2 * radius) / bmhdr->height;
cmds.g.setmatrix1.cmd = FT80X_CMD_SETMATRIX;
cmds.g.begin.cmd = FT80X_BEGIN(FT80X_PRIM_BITMAPS);;
cmds.g.bitmapsource.cmd = FT80X_BITMAP_SOURCE(0);
cmds.g.bitmaplayout.cmd = FT80X_BITMAP_LAYOUT(bmhdr->format, bmhdr->stride,
bmhdr->height);
cmds.g.bitmapsize.cmd = FT80X_BITMAP_SIZE(FT80X_FILTER_BILINEAR,
FT80X_WRAP_BORDER,
FT80X_WRAP_BORDER,
2 * radius, 2 * radius);
cmds.g.vertex2f.cmd = FT80X_VERTEX2F((xoffset - radius) * 16,
(yoffset - radius) * 16);
cmds.g.end.cmd = FT80X_END();
cmds.g.blend.cmd = FT80X_BLEND_FUNC(FT80X_BLEND_SRC_ALPHA,
FT80X_BLEND_ONE_MINUS_SRC_ALPHA);
cmds.g.loadidentity2.cmd = FT80X_CMD_LOADIDENTITY;
cmds.g.setmatrix2.cmd = FT80X_CMD_SETMATRIX;
cmds.g.colorrgb.cmd = FT80X_COLOR_RGB(0xff, 0xff, 0xff);
cmds.g.gauge.cmd = FT80X_CMD_GAUGE; /* Gauge */
cmds.g.gauge.x = xoffset;
cmds.g.gauge.y = yoffset;
cmds.g.gauge.r = radius;
cmds.g.gauge.options = FT80X_OPT_NOTICKS | FT80X_OPT_NOBACK;
cmds.g.gauge.major = 5;
cmds.g.gauge.minor = 4;
cmds.g.gauge.val = 30;
cmds.g.gauge.range = 100;
ret = ft80x_dl_data(fd, buffer, &cmds.g, sizeof(cmds.g));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
/* Finally, terminate the display list */
ret = ft80x_dl_end(fd, buffer);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_end failed: %d\n", ret);
}
return ret;
}
apps/examples/ft80x: Add another coprocessor example: keys
2018-02-22 20:20:00 +01:00
/****************************************************************************
* Name: ft80x_coproc_keys
*
* Description:
* Demonstrate the keys widget
*
****************************************************************************/
int ft80x_coproc_keys(int fd, FAR struct ft80x_dlbuffer_s *buffer)
{
int16_t font;
int16_t width;
int16_t height;
int16_t ydist;
int16_t yoffset;
int16_t xoffset;
int ret;
/* Formatted output chunks */
union
{
struct
{
struct ft80x_cmd32_s clearrgb;
struct ft80x_cmd32_s clear;
struct ft80x_cmd32_s colorrgb;
} a;
struct
{
struct ft80x_cmd_fgcolor_s fgcolor;
struct ft80x_cmd_keys_s keys;
} b;
struct
{
struct ft80x_cmd_fgcolor_s fgcolor;
struct ft80x_cmd_gradcolor_s gradcolor;
struct ft80x_cmd_keys_s keys;
} c;
struct
{
struct ft80x_cmd_gradcolor_s gradcolor;
struct ft80x_cmd_keys_s keys;
} d;
struct
{
struct ft80x_cmd32_s colora;
struct ft80x_cmd_keys_s keys;
} e;
struct ft80x_cmd_keys_s keys;
struct ft80x_cmd_button_s button;
struct ft80x_cmd_text_s text;
} cmds;
#ifdef CONFIG_LCD_FT80X_QVGA
font = 27;
width = 22;
height = 22;
ydist = 3;
#else
font = 29;
width = 30;
height = 30;
ydist = 5;
#endif
/* Create the hardware display list */
ret = ft80x_dl_start(fd, buffer, true);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_start failed: %d\n", ret);
return ret;
}
cmds.a.clearrgb.cmd = FT80X_CLEAR_COLOR_RGB(64, 64, 64);
cmds.a.clear.cmd = FT80X_CLEAR(1 ,1, 1);
cmds.a.colorrgb.cmd = FT80X_COLOR_RGB(0xff, 0xff, 0xff);
/* Copy the commands into the display list */
ret = ft80x_dl_data(fd, buffer, &cmds.a, sizeof(cmds.a));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
/* Draw keys with flat effect */
cmds.b.fgcolor.cmd = FT80X_CMD_FGCOLOR; /* Foreground color */
cmds.b.fgcolor.c = 0x404080;
cmds.b.keys.cmd = FT80X_CMD_KEYS; /* Keys */
cmds.b.keys.x = 10;
cmds.b.keys.y = 10;
cmds.b.keys.w = 4 * width;
cmds.b.keys.h = 30;
cmds.b.keys.font = font;
cmds.b.keys.options = FT80X_OPT_FLAT;
ret = ft80x_dl_data(fd, buffer, &cmds.b, sizeof(cmds.b));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "ABCD");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
cmds.text.cmd = FT80X_CMD_TEXT; /* Text */
cmds.text.x = 20;
cmds.text.y = 40;
cmds.text.font = 26;
cmds.text.options = 0;
ret = ft80x_dl_data(fd, buffer, &cmds.text, sizeof(cmds.text));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "Flat effect");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* Draw keys with 3d effect */
xoffset = 4 * width + 20;
cmds.b.fgcolor.cmd = FT80X_CMD_FGCOLOR; /* Foreground color */
cmds.b.fgcolor.c = 0x800000;
cmds.b.keys.cmd = FT80X_CMD_KEYS; /* Keys */
cmds.b.keys.x = xoffset;
cmds.b.keys.y = 10;
cmds.b.keys.w = 4 * width;
cmds.b.keys.h = 30;
cmds.b.keys.font = font;
cmds.b.keys.options = 0;
ret = ft80x_dl_data(fd, buffer, &cmds.b, sizeof(cmds.b));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "ABCD");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
cmds.text.cmd = FT80X_CMD_TEXT; /* Text */
cmds.text.x = xoffset;
cmds.text.y = 40;
cmds.text.font = 26;
cmds.text.options = 0;
ret = ft80x_dl_data(fd, buffer, &cmds.text, sizeof(cmds.text));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "3D effect");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* Draw keys with center option */
xoffset += 4*width + 20;
cmds.b.fgcolor.cmd = FT80X_CMD_FGCOLOR; /* Foreground color */
cmds.b.fgcolor.c = 0xffff000;
cmds.b.keys.cmd = FT80X_CMD_KEYS; /* Keys */
cmds.b.keys.x = xoffset;
cmds.b.keys.y = 10;
cmds.b.keys.w = FT80X_DISPLAY_WIDTH - 230;
cmds.b.keys.h = 30;
cmds.b.keys.font = font;
cmds.b.keys.options = FT80X_OPT_CENTER;
ret = ft80x_dl_data(fd, buffer, &cmds.b, sizeof(cmds.b));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "ABCD");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
cmds.text.cmd = FT80X_CMD_TEXT; /* Text */
cmds.text.x = 20;
cmds.text.y = 40;
cmds.text.font = 26;
cmds.text.options = 0;
ret = ft80x_dl_data(fd, buffer, &cmds.text, sizeof(cmds.text));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "Option Center");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* Construct a simple keyboard - note that the tags associated with the
* keys are the character values given in the arguments.
*/
yoffset = 80 + 10;
cmds.c.fgcolor.cmd = FT80X_CMD_FGCOLOR; /* Foreground color */
cmds.c.fgcolor.c = 0x404080;
cmds.c.gradcolor.cmd = FT80X_CMD_GRADCOLOR; /* Gradient color */
cmds.c.gradcolor.c = 0x00ff00;
cmds.c.keys.cmd = FT80X_CMD_KEYS; /* Keys */
cmds.c.keys.x = ydist;
cmds.c.keys.y = yoffset;
cmds.c.keys.w = 10 * width;
cmds.c.keys.h = height;
cmds.c.keys.font = font;
cmds.c.keys.options = FT80X_OPT_CENTER;
ret = ft80x_dl_data(fd, buffer, &cmds.c, sizeof(cmds.c));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "qwertyuiop");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
yoffset += height + ydist;
cmds.d.gradcolor.cmd = FT80X_CMD_GRADCOLOR; /* Gradient color */
cmds.d.gradcolor.c = 0x00ffff;
cmds.d.keys.cmd = FT80X_CMD_KEYS; /* Keys */
cmds.d.keys.x = ydist;
cmds.d.keys.y = yoffset;
cmds.d.keys.w = 10 * width;
cmds.d.keys.h = height;
cmds.d.keys.font = font;
cmds.d.keys.options = FT80X_OPT_CENTER;
ret = ft80x_dl_data(fd, buffer, &cmds.d, sizeof(cmds.d));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "asdfghijkl");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
yoffset += height + ydist;
cmds.d.gradcolor.c = 0xffff00;
cmds.d.keys.y = yoffset;
cmds.d.keys.options = FT80X_OPT_CENTER | 'z';
ret = ft80x_dl_data(fd, buffer, &cmds.d, sizeof(cmds.d));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "zxcvbnm");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
cmds.button.cmd = FT80X_CMD_BUTTON;
cmds.button.x = xoffset;
cmds.button.y = yoffset;
cmds.button.w = width;
cmds.button.h = height;
cmds.button.font = 28;
cmds.button.options = FT80X_OPT_FLAT;
ret = ft80x_dl_data(fd, buffer, &cmds.button, sizeof(cmds.button));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, " ");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
yoffset = 80 + 10;
cmds.keys.cmd = FT80X_CMD_KEYS; /* Keys */
cmds.keys.x = 11 * width;
cmds.keys.y = yoffset;
cmds.keys.w = 3 * width;
cmds.keys.h = height;
cmds.keys.font = font;
cmds.keys.options = 0;
ret = ft80x_dl_data(fd, buffer, &cmds.keys, sizeof(cmds.keys));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "789");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
yoffset += height + ydist;
cmds.keys.y = yoffset;
ret = ft80x_dl_data(fd, buffer, &cmds.keys, sizeof(cmds.keys));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "456");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
yoffset += height + ydist;
cmds.keys.y = yoffset;
ret = ft80x_dl_data(fd, buffer, &cmds.keys, sizeof(cmds.keys));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "123");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
yoffset += height + ydist;
cmds.e.colora.cmd = FT80X_COLOR_A(255);
cmds.e.keys.cmd = FT80X_CMD_KEYS; /* Keys */
cmds.e.keys.x = 11 * width;
cmds.e.keys.y = yoffset;
cmds.e.keys.w = 3 * width;
cmds.e.keys.h = height;
cmds.e.keys.font = font;
cmds.e.keys.options = 0 | '0';
ret = ft80x_dl_data(fd, buffer, &cmds.e, sizeof(cmds.e));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "0.");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* Finally, terminate the display list */
ret = ft80x_dl_end(fd, buffer);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_end failed: %d\n", ret);
}
return ret;
}
Squashed commit of the following: apps/examples/ft80x: Add one display example. Many more are needed but this is enough to get started with testing (when I eventually have hardware). apps/examples/ft80x: Add the bare framework for a test of the FT80x
2018-02-18 23:54:11 +01:00
/****************************************************************************
Squashed commit of the following: apps/graphics/ft80x: Replace polling logic with gentler signal logic when waitinf for the CMD FIFO to become empty. apps/examples/ft80x: Add first co-processor example. apps/graphics: Extend library to manage display lists either in display memory (RAM DL) or provided directly to th co-processor FIFO (RAM CMD). apps/examples/ft80x: Some minor clean-up. Trivial changes for coprocessor support.
2018-02-20 22:23:05 +01:00
* Name: ft80x_coproc_progressbar
Squashed commit of the following: apps/examples/ft80x: Add one display example. Many more are needed but this is enough to get started with testing (when I eventually have hardware). apps/examples/ft80x: Add the bare framework for a test of the FT80x
2018-02-18 23:54:11 +01:00
*
* Description:
Squashed commit of the following: apps/graphics/ft80x: Replace polling logic with gentler signal logic when waitinf for the CMD FIFO to become empty. apps/examples/ft80x: Add first co-processor example. apps/graphics: Extend library to manage display lists either in display memory (RAM DL) or provided directly to th co-processor FIFO (RAM CMD). apps/examples/ft80x: Some minor clean-up. Trivial changes for coprocessor support.
2018-02-20 22:23:05 +01:00
* Demonstrate the progress bar command
Squashed commit of the following: apps/examples/ft80x: Add one display example. Many more are needed but this is enough to get started with testing (when I eventually have hardware). apps/examples/ft80x: Add the bare framework for a test of the FT80x
2018-02-18 23:54:11 +01:00
*
****************************************************************************/
Squashed commit of the following: apps/graphics/ft80x: Replace polling logic with gentler signal logic when waitinf for the CMD FIFO to become empty. apps/examples/ft80x: Add first co-processor example. apps/graphics: Extend library to manage display lists either in display memory (RAM DL) or provided directly to th co-processor FIFO (RAM CMD). apps/examples/ft80x: Some minor clean-up. Trivial changes for coprocessor support.
2018-02-20 22:23:05 +01:00
int ft80x_coproc_progressbar(int fd, FAR struct ft80x_dlbuffer_s *buffer)
{
int16_t xoffset;
int16_t yoffset;
int16_t ydist = FT80X_DISPLAY_WIDTH / 12;
int16_t ysz = FT80X_DISPLAY_WIDTH / 24;
int ret;
/* Formatted output chunks */
union
{
struct
{
struct ft80x_cmd32_s clearrgb;
struct ft80x_cmd32_s clear;
struct ft80x_cmd32_s colorrgb;
} a;
struct
{
struct ft80x_cmd32_s colorrgb;
struct ft80x_cmd_bgcolor_s bgcolor;
struct ft80x_cmd_progress_s progress;
struct ft80x_cmd32_s colora;
struct ft80x_cmd_text_s text;
} b;
struct
{
struct ft80x_cmd32_s colorrgb;
struct ft80x_cmd_bgcolor_s bgcolor;
} c;
struct
{
struct ft80x_cmd_progress_s progress;
struct ft80x_cmd_bgcolor_s bgcolor;
} d;
struct
{
struct ft80x_cmd_progress_s progress;
struct ft80x_cmd_text_s text;
} e;
struct ft80x_cmd_progress_s progress;
} cmds;
/* Create the hardware display list */
ret = ft80x_dl_start(fd, buffer, true);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_start failed: %d\n", ret);
return ret;
}
cmds.a.clearrgb.cmd = FT80X_CLEAR_COLOR_RGB(64, 64, 64);
cmds.a.clear.cmd = FT80X_CLEAR(1 ,1, 1);
cmds.a.colorrgb.cmd = FT80X_COLOR_RGB(0xff, 0xff, 0xff);
/* Copy the commands into the display list */
ret = ft80x_dl_data(fd, buffer, &cmds.a, sizeof(cmds.a));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
/* Draw progress bar with flat effect */
cmds.b.colorrgb.cmd = FT80X_COLOR_RGB(0xff, 0xff, 0xff);
cmds.b.bgcolor.cmd = FT80X_CMD_BGCOLOR; /* Background color */
cmds.b.bgcolor.c = 0x404080;
cmds.b.progress.cmd = FT80X_CMD_PROGRESS; /* Progress bar */
cmds.b.progress.x = 20;
cmds.b.progress.y = 10;
cmds.b.progress.w = 120;
cmds.b.progress.h = 20;
cmds.b.progress.options = FT80X_OPT_FLAT;
cmds.b.progress.val = 50;
cmds.b.progress.range = 100;
cmds.b.colora.cmd = FT80X_COLOR_A(255); /* Color A */
cmds.b.text.cmd = FT80X_CMD_TEXT; /* Text */
cmds.b.text.x = 20;
cmds.b.text.y = 40;
cmds.b.text.font = 26;
cmds.b.text.options = 0;
ret = ft80x_dl_data(fd, buffer, &cmds.b, sizeof(cmds.b));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "Flat effect");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* Draw progress bar with 3d effect */
cmds.b.colorrgb.cmd = FT80X_COLOR_RGB(0x00, 0xff, 0x00);
cmds.b.bgcolor.c = 0x800000;
cmds.b.progress.x = 180;
cmds.b.progress.options = 0;
cmds.b.progress.val = 75;
cmds.b.text.x = 180;
ret = ft80x_dl_data(fd, buffer, &cmds.b, sizeof(cmds.b));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "3D effect");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* Draw progress bar with 3d effect and string on top */
cmds.b.colorrgb.cmd = FT80X_COLOR_RGB(0xff, 0x00, 0x00);
cmds.b.bgcolor.c = 0x000080;
cmds.b.progress.x = 30;
cmds.b.progress.y = 60;
cmds.b.progress.h = 30;
cmds.b.progress.val = 19660;
cmds.b.progress.range = 65535;
cmds.b.text.x = 78;
cmds.b.text.y = 68;
ret = ft80x_dl_data(fd, buffer, &cmds.b, sizeof(cmds.b));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "3D effect");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 21:32:20 +01:00
xoffset = 20;
yoffset = 120;
Squashed commit of the following: apps/graphics/ft80x: Replace polling logic with gentler signal logic when waitinf for the CMD FIFO to become empty. apps/examples/ft80x: Add first co-processor example. apps/graphics: Extend library to manage display lists either in display memory (RAM DL) or provided directly to th co-processor FIFO (RAM CMD). apps/examples/ft80x: Some minor clean-up. Trivial changes for coprocessor support.
2018-02-20 22:23:05 +01:00
cmds.c.colorrgb.cmd = FT80X_COLOR_RGB(0x00, 0xa0, 0x00);
cmds.c.bgcolor.cmd = FT80X_CMD_BGCOLOR; /* Background color */
cmds.c.bgcolor.c = 0x800000;
ret = ft80x_dl_data(fd, buffer, &cmds.c, sizeof(cmds.c));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
cmds.d.progress.cmd = FT80X_CMD_PROGRESS; /* Progress bar */
cmds.d.progress.x = xoffset;
cmds.d.progress.y = yoffset;
cmds.d.progress.w = 150;
cmds.d.progress.h = ysz;
cmds.d.progress.options = 0;
cmds.d.progress.val = 10;
cmds.d.progress.range = 100;
cmds.d.bgcolor.cmd = FT80X_CMD_BGCOLOR; /* Background color */
cmds.d.bgcolor.c = 0x000080;
ret = ft80x_dl_data(fd, buffer, &cmds.d, sizeof(cmds.d));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 21:32:20 +01:00
yoffset += ydist;
Squashed commit of the following: apps/graphics/ft80x: Replace polling logic with gentler signal logic when waitinf for the CMD FIFO to become empty. apps/examples/ft80x: Add first co-processor example. apps/graphics: Extend library to manage display lists either in display memory (RAM DL) or provided directly to th co-processor FIFO (RAM CMD). apps/examples/ft80x: Some minor clean-up. Trivial changes for coprocessor support.
2018-02-20 22:23:05 +01:00
cmds.d.progress.y = yoffset;
cmds.d.progress.val = 40;
cmds.d.bgcolor.c = 0xffff00;
ret = ft80x_dl_data(fd, buffer, &cmds.d, sizeof(cmds.d));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 21:32:20 +01:00
yoffset += ydist;
Squashed commit of the following: apps/graphics/ft80x: Replace polling logic with gentler signal logic when waitinf for the CMD FIFO to become empty. apps/examples/ft80x: Add first co-processor example. apps/graphics: Extend library to manage display lists either in display memory (RAM DL) or provided directly to th co-processor FIFO (RAM CMD). apps/examples/ft80x: Some minor clean-up. Trivial changes for coprocessor support.
2018-02-20 22:23:05 +01:00
cmds.d.progress.y = yoffset;
cmds.d.progress.val = 70;
cmds.d.bgcolor.c = 0x808080;
ret = ft80x_dl_data(fd, buffer, &cmds.d, sizeof(cmds.d));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 21:32:20 +01:00
yoffset += ydist;
Squashed commit of the following: apps/graphics/ft80x: Replace polling logic with gentler signal logic when waitinf for the CMD FIFO to become empty. apps/examples/ft80x: Add first co-processor example. apps/graphics: Extend library to manage display lists either in display memory (RAM DL) or provided directly to th co-processor FIFO (RAM CMD). apps/examples/ft80x: Some minor clean-up. Trivial changes for coprocessor support.
2018-02-20 22:23:05 +01:00
cmds.e.progress.cmd = FT80X_CMD_PROGRESS; /* Progress bar */
cmds.e.progress.x = xoffset;
cmds.e.progress.y = yoffset;
cmds.e.progress.w = 150;
cmds.e.progress.h = ysz;
cmds.e.progress.options = 0;
cmds.e.progress.val = 90;
cmds.e.progress.range = 100;
cmds.e.text.cmd = FT80X_CMD_TEXT; /* Text */
cmds.e.text.x = xoffset + 180;
cmds.e.text.y = 80;
cmds.e.text.font = 26;
cmds.e.text.options = 0;
ret = ft80x_dl_data(fd, buffer, &cmds.e, sizeof(cmds.e));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "40% TopBottom");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
cmds.progress.cmd = FT80X_CMD_PROGRESS; /* Progress bar */
cmds.progress.x = xoffset + 180;
cmds.progress.y = 100;
cmds.progress.w = ysz;
cmds.progress.h = 150;
cmds.progress.options = 0;
cmds.progress.val = 40;
cmds.progress.range = 100;
ret = ft80x_dl_data(fd, buffer, &cmds.progress, sizeof(cmds.progress));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
Squashed commit of the following: apps/examples/ft80x: Add another co-processor demo ft80x: Add a few more debug message.
2018-02-21 01:46:17 +01:00
/* Finally, terminate the display list */
ret = ft80x_dl_end(fd, buffer);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_end failed: %d\n", ret);
}
return ret;
}
/****************************************************************************
* Name: ft80x_coproc_progressbar
*
* Description:
* Demonstrate the progress bar command
*
****************************************************************************/
int ft80x_coproc_scrollbar(int fd, FAR struct ft80x_dlbuffer_s *buffer)
{
int16_t xoffset;
int16_t yoffset;
int16_t xdist = FT80X_DISPLAY_WIDTH / 12;
int16_t ydist = FT80X_DISPLAY_WIDTH / 12;
int16_t wsz;
int ret;
/* Formatted output chunks */
union
{
struct
{
struct ft80x_cmd32_s clearrgb;
struct ft80x_cmd32_s clear;
struct ft80x_cmd32_s colorrgb;
} a;
struct
{
struct ft80x_cmd_fgcolor_s fgcolor;
struct ft80x_cmd_bgcolor_s bgcolor;
struct ft80x_cmd_scrollbar_s scrollbar;
struct ft80x_cmd32_s colora;
struct ft80x_cmd_text_s text;
} b;
struct
{
struct ft80x_cmd_fgcolor_s fgcolor;
struct ft80x_cmd_bgcolor_s bgcolor;
struct ft80x_cmd_scrollbar_s scrollbar;
struct ft80x_cmd32_s colora;
} c;
struct
{
struct ft80x_cmd_fgcolor_s fgcolor;
struct ft80x_cmd_bgcolor_s bgcolor;
struct ft80x_cmd_scrollbar_s scrollbar;
} d;
struct
{
struct ft80x_cmd_bgcolor_s bgcolor;
struct ft80x_cmd_scrollbar_s scrollbar;
struct ft80x_cmd32_s colora;
} e;
struct
{
struct ft80x_cmd_bgcolor_s bgcolor;
struct ft80x_cmd_scrollbar_s scrollbar;
} f;
} cmds;
/* Create the hardware display list */
ret = ft80x_dl_start(fd, buffer, true);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_start failed: %d\n", ret);
return ret;
}
cmds.a.clearrgb.cmd = FT80X_CLEAR_COLOR_RGB(64, 64, 64);
cmds.a.clear.cmd = FT80X_CLEAR(1 ,1, 1);
cmds.a.colorrgb.cmd = FT80X_COLOR_RGB(0xff, 0xff, 0xff);
/* Copy the commands into the display list */
ret = ft80x_dl_data(fd, buffer, &cmds.a, sizeof(cmds.a));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
/* Draw scroll bar with flat effect */
cmds.b.fgcolor.cmd = FT80X_CMD_FGCOLOR;
cmds.b.fgcolor.c = 0xffff00;
cmds.b.bgcolor.cmd = FT80X_CMD_BGCOLOR;
cmds.b.bgcolor.c = 0x404080;
cmds.b.scrollbar.cmd = FT80X_CMD_SCROLLBAR;
cmds.b.scrollbar.x = 20;
cmds.b.scrollbar.y = 10;
cmds.b.scrollbar.w = 120;
cmds.b.scrollbar.h = 8;
cmds.b.scrollbar.options = FT80X_OPT_FLAT;
cmds.b.scrollbar.val = 20;
cmds.b.scrollbar.size = 30;
cmds.b.scrollbar.range = 100;
cmds.b.colora.cmd = FT80X_COLOR_A(255);
cmds.b.text.cmd = FT80X_CMD_TEXT; /* Text */
cmds.b.text.x = 20;
cmds.b.text.y = 40;
cmds.b.text.font = 26;
cmds.b.text.options = 0;
ret = ft80x_dl_data(fd, buffer, &cmds.b, sizeof(cmds.b));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "Flat effect");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* Draw scroll bar with 3d effect */
cmds.b.fgcolor.c = 0x00ff00;
cmds.b.bgcolor.c = 0x800000;
cmds.b.scrollbar.x = 180;
cmds.b.scrollbar.options = 0;
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 21:32:20 +01:00
cmds.b.text.x = 180;
Squashed commit of the following: apps/examples/ft80x: Add another co-processor demo ft80x: Add a few more debug message.
2018-02-21 01:46:17 +01:00
ret = ft80x_dl_data(fd, buffer, &cmds.b, sizeof(cmds.b));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "3D effect");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* Draw horizontal scroll bars */
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 21:32:20 +01:00
xoffset = 20;
yoffset = 120;
wsz = FT80X_DISPLAY_WIDTH / 2 - 40;
Squashed commit of the following: apps/examples/ft80x: Add another co-processor demo ft80x: Add a few more debug message.
2018-02-21 01:46:17 +01:00
cmds.d.fgcolor.cmd = FT80X_CMD_FGCOLOR;
cmds.d.fgcolor.c = 0x00a000;
cmds.d.bgcolor.cmd = FT80X_CMD_BGCOLOR;
cmds.d.bgcolor.c = 0x800000;
cmds.d.scrollbar.cmd = FT80X_CMD_SCROLLBAR;
cmds.d.scrollbar.x = xoffset;
cmds.d.scrollbar.y = yoffset;
cmds.d.scrollbar.w = wsz;
cmds.d.scrollbar.h = 8;
cmds.d.scrollbar.options = 0;
cmds.d.scrollbar.val = 10;
cmds.d.scrollbar.size = 30;
cmds.d.scrollbar.range = 100;
ret = ft80x_dl_data(fd, buffer, &cmds.d, sizeof(cmds.d));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 21:32:20 +01:00
yoffset += ydist;
Squashed commit of the following: apps/examples/ft80x: Add another co-processor demo ft80x: Add a few more debug message.
2018-02-21 01:46:17 +01:00
cmds.c.bgcolor.cmd = FT80X_CMD_BGCOLOR;
cmds.c.bgcolor.c = 0x000080;
cmds.c.scrollbar.cmd = FT80X_CMD_SCROLLBAR;
cmds.c.scrollbar.x = xoffset;
cmds.c.scrollbar.y = yoffset;
cmds.c.scrollbar.w = wsz;
cmds.c.scrollbar.h = 8;
cmds.c.scrollbar.options = 0;
cmds.c.scrollbar.val = 30;
cmds.c.scrollbar.size = 30;
cmds.c.scrollbar.range = 100;
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 21:32:20 +01:00
cmds.c.colora.cmd = FT80X_COLOR_A(255);
Squashed commit of the following: apps/examples/ft80x: Add another co-processor demo ft80x: Add a few more debug message.
2018-02-21 01:46:17 +01:00
ret = ft80x_dl_data(fd, buffer, &cmds.c, sizeof(cmds.c));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 21:32:20 +01:00
yoffset += ydist;
Squashed commit of the following: apps/examples/ft80x: Add another co-processor demo ft80x: Add a few more debug message.
2018-02-21 01:46:17 +01:00
cmds.f.bgcolor.cmd = FT80X_CMD_BGCOLOR;
cmds.f.bgcolor.c = 0xffff00;
cmds.f.scrollbar.cmd = FT80X_CMD_SCROLLBAR;
cmds.f.scrollbar.x = xoffset;
cmds.f.scrollbar.y = yoffset;
cmds.f.scrollbar.w = wsz;
cmds.f.scrollbar.h = 8;
cmds.f.scrollbar.options = 0;
cmds.f.scrollbar.val = 50;
cmds.f.scrollbar.size = 30;
cmds.f.scrollbar.range = 100;
ret = ft80x_dl_data(fd, buffer, &cmds.f, sizeof(cmds.f));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 21:32:20 +01:00
yoffset += ydist;
Squashed commit of the following: apps/examples/ft80x: Add another co-processor demo ft80x: Add a few more debug message.
2018-02-21 01:46:17 +01:00
cmds.f.bgcolor.c = 0x808080;
cmds.f.scrollbar.y = yoffset;
cmds.f.scrollbar.val = 70;
ret = ft80x_dl_data(fd, buffer, &cmds.f, sizeof(cmds.f));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
/* Draw vertical scroll bars */
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 21:32:20 +01:00
xoffset = FT80X_DISPLAY_WIDTH / 2 + 40;
yoffset = 80;
wsz = FT80X_DISPLAY_HEIGHT - 100;
Squashed commit of the following: apps/examples/ft80x: Add another co-processor demo ft80x: Add a few more debug message.
2018-02-21 01:46:17 +01:00
cmds.f.bgcolor.c = 0x800000;
cmds.f.scrollbar.x = xoffset;
cmds.f.scrollbar.y = yoffset;
cmds.f.scrollbar.w = 8;
cmds.f.scrollbar.h = wsz;
cmds.f.scrollbar.val = 10;
ret = ft80x_dl_data(fd, buffer, &cmds.f, sizeof(cmds.f));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 21:32:20 +01:00
xoffset += xdist;
Squashed commit of the following: apps/examples/ft80x: Add another co-processor demo ft80x: Add a few more debug message.
2018-02-21 01:46:17 +01:00
cmds.e.bgcolor.cmd = FT80X_CMD_BGCOLOR;
cmds.e.bgcolor.c = 0x000080;
cmds.e.scrollbar.cmd = FT80X_CMD_SCROLLBAR;
cmds.e.scrollbar.x = xoffset;
cmds.e.scrollbar.y = yoffset;
cmds.e.scrollbar.w = 8;
cmds.e.scrollbar.h = wsz;
cmds.e.scrollbar.options = 0;
cmds.e.scrollbar.val = 30;
cmds.e.scrollbar.size = 30;
cmds.e.scrollbar.range = 100;
cmds.e.colora.cmd = FT80X_COLOR_A(255);
ret = ft80x_dl_data(fd, buffer, &cmds.e, sizeof(cmds.e));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 21:32:20 +01:00
xoffset += xdist;
Squashed commit of the following: apps/examples/ft80x: Add another co-processor demo ft80x: Add a few more debug message.
2018-02-21 01:46:17 +01:00
cmds.f.bgcolor.cmd = FT80X_CMD_BGCOLOR;
cmds.f.bgcolor.c = 0xffff00;
cmds.f.scrollbar.cmd = FT80X_CMD_SCROLLBAR;
cmds.f.scrollbar.x = xoffset;
cmds.f.scrollbar.y = yoffset;
cmds.f.scrollbar.w = 8;
cmds.f.scrollbar.h = wsz;
cmds.f.scrollbar.options = 0;
cmds.f.scrollbar.val = 50;
cmds.f.scrollbar.size = 30;
cmds.f.scrollbar.range = 100;
ret = ft80x_dl_data(fd, buffer, &cmds.f, sizeof(cmds.f));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 21:32:20 +01:00
xoffset += xdist;
Squashed commit of the following: apps/examples/ft80x: Add another co-processor demo ft80x: Add a few more debug message.
2018-02-21 01:46:17 +01:00
cmds.f.bgcolor.c = 0x808080;
cmds.f.scrollbar.x = xoffset;
cmds.f.scrollbar.val = 70;
ret = ft80x_dl_data(fd, buffer, &cmds.f, sizeof(cmds.f));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
/* Finally, terminate the display list */
Squashed commit of the following: apps/graphics/ft80x: Replace polling logic with gentler signal logic when waitinf for the CMD FIFO to become empty. apps/examples/ft80x: Add first co-processor example. apps/graphics: Extend library to manage display lists either in display memory (RAM DL) or provided directly to th co-processor FIFO (RAM CMD). apps/examples/ft80x: Some minor clean-up. Trivial changes for coprocessor support.
2018-02-20 22:23:05 +01:00
ret = ft80x_dl_end(fd, buffer);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_end failed: %d\n", ret);
}
return ret;
}
apps/graphics/ft80x: Add support for reading/writing multiple registers. Add interface to obtain the touchscreen transform matrix. apps/examples/ft80x: Add more co-processor demos.
2018-02-21 18:50:06 +01:00
/****************************************************************************
* Name: ft80x_coproc_dial
*
* Description:
* Demonstrate the dial widget
*
****************************************************************************/
int ft80x_coproc_dial(int fd, FAR struct ft80x_dlbuffer_s *buffer)
{
int ret;
/* Formatted output chunks */
union
{
struct
{
struct ft80x_cmd32_s clearrgb;
struct ft80x_cmd32_s clear;
struct ft80x_cmd32_s colorrgb;
} a;
struct
{
struct ft80x_cmd_fgcolor_s fgcolor;
struct ft80x_cmd_bgcolor_s bgcolor;
struct ft80x_cmd_dial_s dial;
struct ft80x_cmd32_s colora;
struct ft80x_cmd_text_s text;
} b;
struct
{
struct ft80x_cmd_fgcolor_s fgcolor;
struct ft80x_cmd32_s colorrgb;
struct ft80x_cmd_dial_s dial;
struct ft80x_cmd_text_s text;
} c;
} cmds;
/* Create the hardware display list */
ret = ft80x_dl_start(fd, buffer, true);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_start failed: %d\n", ret);
return ret;
}
cmds.a.clearrgb.cmd = FT80X_CLEAR_COLOR_RGB(64, 64, 64);
cmds.a.clear.cmd = FT80X_CLEAR(1 ,1, 1);
cmds.a.colorrgb.cmd = FT80X_COLOR_RGB(0xff, 0xff, 0xff);
/* Copy the commands into the display list */
ret = ft80x_dl_data(fd, buffer, &cmds.a, sizeof(cmds.a));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
/* Draw dial with flat effect */
cmds.b.fgcolor.cmd = FT80X_CMD_FGCOLOR;
cmds.b.fgcolor.c = 0x00ff00;
cmds.b.bgcolor.cmd = FT80X_CMD_BGCOLOR;
cmds.b.bgcolor.c = 0x000080;
cmds.b.dial.cmd = FT80X_CMD_DIAL; /* Dial */
cmds.b.dial.x = 50;
cmds.b.dial.y = 50;
cmds.b.dial.r = 40;
cmds.b.dial.options = FT80X_OPT_FLAT;
cmds.b.dial.val = 0.20 * 65535; /* 20% */
cmds.b.colora.cmd = FT80X_COLOR_A(255);
cmds.b.text.cmd = FT80X_CMD_TEXT; /* Text */
cmds.b.text.x = 15;
cmds.b.text.y = 90;
cmds.b.text.font = 26;
cmds.b.text.options = 0;
ret = ft80x_dl_data(fd, buffer, &cmds.b, sizeof(cmds.b));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "Flat effect");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* Draw dial with 3d effect */
cmds.b.fgcolor.c = 0x00ff00;
cmds.b.bgcolor.c = 0x800000;
cmds.b.dial.x = 140;
cmds.b.dial.options = 0;
cmds.b.dial.val = 0.45 * 65535; /* 45% */
cmds.b.text.x = 105;
ret = ft80x_dl_data(fd, buffer, &cmds.b, sizeof(cmds.b));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "3D effect");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* Draw increasing dials horizontally */
cmds.c.fgcolor.cmd = FT80X_CMD_FGCOLOR;
cmds.c.fgcolor.c = 0x800000;
cmds.c.colorrgb.cmd = FT80X_COLOR_RGB(41, 1, 5);
cmds.c.dial.cmd = FT80X_CMD_DIAL; /* Dial */
cmds.c.dial.x = 30;
cmds.c.dial.y = 160;
cmds.c.dial.r = 20;
cmds.c.dial.options = 0;
cmds.c.dial.val = 0.30 * 65535; /* 30% */
cmds.c.text.cmd = FT80X_CMD_TEXT; /* Text */
cmds.c.text.x = 20;
cmds.c.text.y = 180;
cmds.c.text.font = 26;
cmds.c.text.options = 0;
ret = ft80x_dl_data(fd, buffer, &cmds.c, sizeof(cmds.c));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "30%");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
cmds.c.fgcolor.c = 0x000080;
cmds.c.colorrgb.cmd = FT80X_COLOR_RGB(11, 7, 65);
cmds.c.dial.x = 100;
cmds.c.dial.r = 40;
cmds.c.dial.val = 0.45 * 65535; /* 45% */
cmds.c.text.x = 90;
cmds.c.text.y = 200;
ret = ft80x_dl_data(fd, buffer, &cmds.c, sizeof(cmds.c));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "45%");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
cmds.c.fgcolor.c = 0xffff00;
cmds.c.colorrgb.cmd = FT80X_COLOR_RGB(87, 94, 9);
cmds.c.dial.x = 210;
cmds.c.dial.r = 60;
cmds.c.dial.val = 0.60 * 65535; /* 60% */
cmds.c.text.x = 200;
cmds.c.text.y = 220;
ret = ft80x_dl_data(fd, buffer, &cmds.c, sizeof(cmds.c));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "60%");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
#ifndef CONFIG_LCD_FT80X_QVGA
cmds.c.fgcolor.c = 0x808080;
cmds.c.colorrgb.cmd = FT80X_COLOR_RGB(51, 50, 52);
cmds.c.dial.x = 360;
cmds.c.dial.r = 80;
cmds.c.dial.val = 0.75 * 65535; /* 75% */
cmds.c.text.x = 350;
cmds.c.text.y = 240;
ret = ft80x_dl_data(fd, buffer, &cmds.c, sizeof(cmds.c));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "75%");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
#endif
/* Finally, terminate the display list */
ret = ft80x_dl_end(fd, buffer);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_end failed: %d\n", ret);
}
return ret;
}
/****************************************************************************
* Name: ft80x_coproc_slider
*
* Description:
* Demonstrate the slider widget
*
****************************************************************************/
int ft80x_coproc_slider(int fd, FAR struct ft80x_dlbuffer_s *buffer)
{
int16_t xoffset;
int16_t yoffset;
int16_t xdist = FT80X_DISPLAY_WIDTH / 12;
int16_t ydist = FT80X_DISPLAY_WIDTH / 12;
int16_t wsz;
int ret;
/* Formatted output chunks */
union
{
struct
{
struct ft80x_cmd32_s clearrgb;
struct ft80x_cmd32_s clear;
struct ft80x_cmd32_s colorrgb;
} a;
struct
{
struct ft80x_cmd_fgcolor_s fgcolor;
struct ft80x_cmd_bgcolor_s bgcolor;
struct ft80x_cmd_slider_s slider;
struct ft80x_cmd32_s colora;
struct ft80x_cmd_text_s text;
} b;
struct
{
struct ft80x_cmd_fgcolor_s fgcolor;
struct ft80x_cmd_bgcolor_s bgcolor;
struct ft80x_cmd32_s colorrgb;
struct ft80x_cmd_slider_s slider;
} c;
struct
{
struct ft80x_cmd_bgcolor_s bgcolor;
struct ft80x_cmd32_s colorrgb;
struct ft80x_cmd_slider_s slider;
struct ft80x_cmd32_s colora;
} d;
struct
{
struct ft80x_cmd_bgcolor_s bgcolor;
struct ft80x_cmd32_s colorrgb;
struct ft80x_cmd_slider_s slider;
} e;
struct
{
struct ft80x_cmd_bgcolor_s bgcolor;
struct ft80x_cmd_slider_s slider;
} f;
} cmds;
/* Create the hardware display list */
ret = ft80x_dl_start(fd, buffer, true);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_start failed: %d\n", ret);
return ret;
}
cmds.a.clearrgb.cmd = FT80X_CLEAR_COLOR_RGB(64, 64, 64);
cmds.a.clear.cmd = FT80X_CLEAR(1 ,1, 1);
cmds.a.colorrgb.cmd = FT80X_COLOR_RGB(0xff, 0xff, 0xff);
/* Draw slider with flat effect */
cmds.b.fgcolor.cmd = FT80X_CMD_FGCOLOR;
cmds.b.fgcolor.c = 0xffff00;
cmds.b.bgcolor.cmd = FT80X_CMD_BGCOLOR;
cmds.b.bgcolor.c = 0x000080;
cmds.b.slider.cmd = FT80X_CMD_SLIDER; /* Slider */
cmds.b.slider.x = 20;
cmds.b.slider.y = 10;
cmds.b.slider.w = 120;
cmds.b.slider.h = 10;
cmds.b.slider.options = FT80X_OPT_FLAT;
cmds.b.slider.val = 30;
cmds.b.slider.range = 100;
cmds.b.colora.cmd = FT80X_COLOR_A(255);
cmds.b.text.cmd = FT80X_CMD_TEXT; /* Text */
cmds.b.text.x = 30;
cmds.b.text.y = 40;
cmds.b.text.font = 26;
cmds.b.text.options = 0;
ret = ft80x_dl_data(fd, buffer, &cmds.b, sizeof(cmds.b));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "Flat effect");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* Draw scroll bar with 3d effect */
cmds.b.fgcolor.c = 0x00ff00;
cmds.b.bgcolor.c = 0x800000;
cmds.b.slider.x = 180;
cmds.b.slider.options = 0;
cmds.b.slider.val = 50;
cmds.b.colora.cmd = FT80X_COLOR_A(255);
cmds.b.text.x = 180;
ret = ft80x_dl_data(fd, buffer, &cmds.b, sizeof(cmds.b));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "3D effect");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* Draw horizontal slider bars */
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 21:32:20 +01:00
xoffset = 20;
yoffset = 120;
wsz = FT80X_DISPLAY_WIDTH / 2 - 40;
apps/graphics/ft80x: Add support for reading/writing multiple registers. Add interface to obtain the touchscreen transform matrix. apps/examples/ft80x: Add more co-processor demos.
2018-02-21 18:50:06 +01:00
cmds.c.fgcolor.cmd = FT80X_CMD_FGCOLOR;
cmds.c.fgcolor.c = 0x00a000;
cmds.c.bgcolor.cmd = FT80X_CMD_BGCOLOR;
cmds.c.bgcolor.c = 0x800000;
cmds.c.colorrgb.cmd = FT80X_COLOR_RGB(41, 1, 5);
cmds.c.slider.cmd = FT80X_CMD_SLIDER; /* Slider */
cmds.c.slider.x = xoffset;
cmds.c.slider.y = yoffset;
cmds.c.slider.w = wsz;
cmds.c.slider.h = 10;
cmds.c.slider.options = 0;
cmds.c.slider.val = 10;
cmds.c.slider.range = 100;
ret = ft80x_dl_data(fd, buffer, &cmds.c, sizeof(cmds.c));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 21:32:20 +01:00
yoffset += ydist;
apps/graphics/ft80x: Add support for reading/writing multiple registers. Add interface to obtain the touchscreen transform matrix. apps/examples/ft80x: Add more co-processor demos.
2018-02-21 18:50:06 +01:00
cmds.d.bgcolor.cmd = FT80X_CMD_BGCOLOR;
cmds.d.bgcolor.c = 0x000080;
cmds.d.colorrgb.cmd = FT80X_COLOR_RGB(11, 7, 65);
cmds.d.slider.cmd = FT80X_CMD_SLIDER; /* Slider */
cmds.d.slider.x = xoffset;
cmds.d.slider.y = yoffset;
cmds.d.slider.w = wsz;
cmds.d.slider.h = 10;
cmds.d.slider.options = 0;
cmds.d.slider.val = 30;
cmds.d.slider.range = 100;
cmds.d.colora.cmd = FT80X_COLOR_A(255);
ret = ft80x_dl_data(fd, buffer, &cmds.d, sizeof(cmds.d));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 21:32:20 +01:00
yoffset += ydist;
apps/graphics/ft80x: Add support for reading/writing multiple registers. Add interface to obtain the touchscreen transform matrix. apps/examples/ft80x: Add more co-processor demos.
2018-02-21 18:50:06 +01:00
cmds.e.bgcolor.cmd = FT80X_CMD_BGCOLOR;
cmds.e.bgcolor.c = 0xffff00;
cmds.e.colorrgb.cmd = FT80X_COLOR_RGB(87, 94, 9);
cmds.e.slider.cmd = FT80X_CMD_SLIDER; /* Slider */
cmds.e.slider.x = xoffset;
cmds.e.slider.y = yoffset;
cmds.e.slider.w = wsz;
cmds.e.slider.h = 10;
cmds.e.slider.options = 0;
cmds.e.slider.val = 50;
cmds.e.slider.range = 100;
ret = ft80x_dl_data(fd, buffer, &cmds.e, sizeof(cmds.e));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 21:32:20 +01:00
yoffset += ydist;
apps/graphics/ft80x: Add support for reading/writing multiple registers. Add interface to obtain the touchscreen transform matrix. apps/examples/ft80x: Add more co-processor demos.
2018-02-21 18:50:06 +01:00
cmds.e.bgcolor.c = 0x808080;
cmds.e.colorrgb.cmd = FT80X_COLOR_RGB(51, 50, 52);
cmds.e.slider.y = yoffset;
cmds.e.slider.val = 70;
ret = ft80x_dl_data(fd, buffer, &cmds.e, sizeof(cmds.e));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 21:32:20 +01:00
xoffset = FT80X_DISPLAY_WIDTH / 2 + 40;
yoffset = 80;
wsz = FT80X_DISPLAY_HEIGHT - 100;
apps/graphics/ft80x: Add support for reading/writing multiple registers. Add interface to obtain the touchscreen transform matrix. apps/examples/ft80x: Add more co-processor demos.
2018-02-21 18:50:06 +01:00
/* Draw vertical slider bars */
cmds.f.bgcolor.cmd = FT80X_CMD_BGCOLOR;
cmds.f.bgcolor.c = 0x800000;
cmds.f.slider.cmd = FT80X_CMD_SLIDER; /* Slider */
cmds.f.slider.x = xoffset;
cmds.f.slider.y = yoffset;
cmds.f.slider.w = 10;
cmds.f.slider.h = wsz;
cmds.f.slider.options = 0;
cmds.f.slider.val = 10;
cmds.f.slider.range = 100;
ret = ft80x_dl_data(fd, buffer, &cmds.f, sizeof(cmds.f));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 21:32:20 +01:00
xoffset += xdist;
apps/graphics/ft80x: Add support for reading/writing multiple registers. Add interface to obtain the touchscreen transform matrix. apps/examples/ft80x: Add more co-processor demos.
2018-02-21 18:50:06 +01:00
cmds.f.bgcolor.c = 0x000080;
cmds.f.slider.x = xoffset;
cmds.f.slider.val = 30;
ret = ft80x_dl_data(fd, buffer, &cmds.f, sizeof(cmds.f));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 21:32:20 +01:00
xoffset += xdist;
apps/graphics/ft80x: Add support for reading/writing multiple registers. Add interface to obtain the touchscreen transform matrix. apps/examples/ft80x: Add more co-processor demos.
2018-02-21 18:50:06 +01:00
cmds.f.bgcolor.c = 0xffff00;
cmds.f.slider.x = xoffset;
cmds.f.slider.val = 50;
ret = ft80x_dl_data(fd, buffer, &cmds.f, sizeof(cmds.f));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 21:32:20 +01:00
xoffset += xdist;
apps/graphics/ft80x: Add support for reading/writing multiple registers. Add interface to obtain the touchscreen transform matrix. apps/examples/ft80x: Add more co-processor demos.
2018-02-21 18:50:06 +01:00
cmds.f.bgcolor.c = 0x808080;
cmds.f.slider.x = xoffset;
cmds.f.slider.val = 70;
ret = ft80x_dl_data(fd, buffer, &cmds.f, sizeof(cmds.f));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
/* Finally, terminate the display list */
ret = ft80x_dl_end(fd, buffer);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_end failed: %d\n", ret);
}
return ret;
}
/****************************************************************************
* Name: ft80x_coproc_toggle
*
* Description:
* Demonstrate the toggle widget
*
****************************************************************************/
int ft80x_coproc_toggle(int fd, FAR struct ft80x_dlbuffer_s *buffer)
{
int16_t xoffset;
int16_t yoffset;
int16_t ydist = 40;
int ret;
/* Formatted output chunks */
union
{
struct
{
struct ft80x_cmd32_s clearrgb;
struct ft80x_cmd32_s clear;
struct ft80x_cmd32_s colorrgb;
} a;
struct
{
struct ft80x_cmd_fgcolor_s fgcolor;
struct ft80x_cmd_bgcolor_s bgcolor;
struct ft80x_cmd32_s colorrgb;
struct ft80x_cmd_toggle_s toggle;
} b;
struct
{
struct ft80x_cmd_fgcolor_s fgcolor;
struct ft80x_cmd_bgcolor_s bgcolor;
struct ft80x_cmd_toggle_s toggle;
} c;
struct
{
struct ft80x_cmd32_s colora;
struct ft80x_cmd_text_s text;
} d;
} cmds;
/* Create the hardware display list */
ret = ft80x_dl_start(fd, buffer, true);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_start failed: %d\n", ret);
return ret;
}
cmds.a.clearrgb.cmd = FT80X_CLEAR_COLOR_RGB(64, 64, 64);
cmds.a.clear.cmd = FT80X_CLEAR(1 ,1, 1);
cmds.a.colorrgb.cmd = FT80X_COLOR_RGB(0xff, 0xff, 0xff);
/* Copy the commands into the display list */
ret = ft80x_dl_data(fd, buffer, &cmds.a, sizeof(cmds.a));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
/* Draw toggle with flat effect */
cmds.b.fgcolor.cmd = FT80X_CMD_FGCOLOR;
cmds.b.fgcolor.c = 0xffff00;
cmds.b.bgcolor.cmd = FT80X_CMD_BGCOLOR;
cmds.b.bgcolor.c = 0x000080;
cmds.b.colorrgb.cmd = FT80X_COLOR_RGB(0xff, 0xff, 0xff);
cmds.b.toggle.cmd = FT80X_CMD_TOGGLE; /* Toggle */
cmds.b.toggle.x = 40;
cmds.b.toggle.y = 10;
cmds.b.toggle.w = 30;
cmds.b.toggle.font = 27;
cmds.b.toggle.options = FT80X_OPT_FLAT;
cmds.b.toggle.state = 0.5 * 65535;
ret = ft80x_dl_data(fd, buffer, &cmds.b, sizeof(cmds.b));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "no""\xff""yes");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
cmds.d.colora.cmd = FT80X_COLOR_A(255); /* Color A */
cmds.d.text.cmd = FT80X_CMD_TEXT; /* Text */
cmds.d.text.x = 40;
cmds.d.text.y = 40;
cmds.d.text.font = 26;
cmds.d.text.options = 0;
ret = ft80x_dl_data(fd, buffer, &cmds.d, sizeof(cmds.d));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "Flat effect");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* Draw toggle bar with 3d effect */
cmds.c.fgcolor.cmd = FT80X_CMD_FGCOLOR;
cmds.c.fgcolor.c = 0x00ff00;
cmds.c.bgcolor.cmd = FT80X_CMD_BGCOLOR;
cmds.c.bgcolor.c = 0x800000;
cmds.c.toggle.cmd = FT80X_CMD_TOGGLE; /* Toggle */
cmds.c.toggle.x = 40;
cmds.c.toggle.y = 10;
cmds.c.toggle.w = 30;
cmds.c.toggle.font = 27;
cmds.c.toggle.options = 0;
cmds.c.toggle.state = 1 * 65535;
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 21:32:20 +01:00
ret = ft80x_dl_data(fd, buffer, &cmds.c, sizeof(cmds.c));
apps/graphics/ft80x: Add support for reading/writing multiple registers. Add interface to obtain the touchscreen transform matrix. apps/examples/ft80x: Add more co-processor demos.
2018-02-21 18:50:06 +01:00
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "stop""\xff""run");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
cmds.d.colora.cmd = FT80X_COLOR_A(255); /* Color A */
cmds.d.text.cmd = FT80X_CMD_TEXT; /* Text */
cmds.d.text.x = 140;
cmds.d.text.y = 40;
cmds.d.text.font = 26;
cmds.d.text.options = 0;
ret = ft80x_dl_data(fd, buffer, &cmds.d, sizeof(cmds.d));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "3D effect");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* Draw horizontal toggle bars */
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 21:32:20 +01:00
xoffset = 40;
yoffset = 80;
apps/graphics/ft80x: Add support for reading/writing multiple registers. Add interface to obtain the touchscreen transform matrix. apps/examples/ft80x: Add more co-processor demos.
2018-02-21 18:50:06 +01:00
cmds.c.fgcolor.cmd = FT80X_CMD_FGCOLOR;
cmds.c.fgcolor.c = 0x800000;
cmds.c.bgcolor.cmd = FT80X_CMD_BGCOLOR;
cmds.c.bgcolor.c = 0x410105;
cmds.c.toggle.cmd = FT80X_CMD_TOGGLE; /* Toggle */
cmds.c.toggle.x = xoffset;
cmds.c.toggle.y = yoffset;
cmds.c.toggle.w = 30;
cmds.c.toggle.font = 27;
cmds.c.toggle.options = 0;
cmds.c.toggle.state = 0 * 65535;
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 21:32:20 +01:00
ret = ft80x_dl_data(fd, buffer, &cmds.c, sizeof(cmds.c));
apps/graphics/ft80x: Add support for reading/writing multiple registers. Add interface to obtain the touchscreen transform matrix. apps/examples/ft80x: Add more co-processor demos.
2018-02-21 18:50:06 +01:00
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "-ve""\xff""+ve");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 21:32:20 +01:00
yoffset += ydist;
apps/graphics/ft80x: Add support for reading/writing multiple registers. Add interface to obtain the touchscreen transform matrix. apps/examples/ft80x: Add more co-processor demos.
2018-02-21 18:50:06 +01:00
cmds.c.fgcolor.c = 0x0b0721;
cmds.c.bgcolor.c = 0x000080;
cmds.c.toggle.y = yoffset;
cmds.c.toggle.state = 0.25 * 65535;
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 21:32:20 +01:00
ret = ft80x_dl_data(fd, buffer, &cmds.c, sizeof(cmds.c));
apps/graphics/ft80x: Add support for reading/writing multiple registers. Add interface to obtain the touchscreen transform matrix. apps/examples/ft80x: Add more co-processor demos.
2018-02-21 18:50:06 +01:00
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "zero""\xff""one");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 21:32:20 +01:00
yoffset += ydist;
apps/graphics/ft80x: Add support for reading/writing multiple registers. Add interface to obtain the touchscreen transform matrix. apps/examples/ft80x: Add more co-processor demos.
2018-02-21 18:50:06 +01:00
cmds.b.fgcolor.cmd = FT80X_CMD_FGCOLOR;
cmds.b.fgcolor.c = 0x575e1b;
cmds.b.bgcolor.cmd = FT80X_CMD_BGCOLOR;
cmds.b.bgcolor.c = 0xffff00;
cmds.b.colorrgb.cmd = FT80X_COLOR_RGB(0, 0, 0);
cmds.b.toggle.cmd = FT80X_CMD_TOGGLE; /* Toggle */
cmds.b.toggle.x = xoffset;
cmds.b.toggle.y = yoffset;
cmds.b.toggle.w = 30;
cmds.b.toggle.font = 27;
cmds.b.toggle.options = 0;
cmds.b.toggle.state = 0.50 * 65535;
ret = ft80x_dl_data(fd, buffer, &cmds.b, sizeof(cmds.b));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "exit""\xff""init");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 21:32:20 +01:00
yoffset += ydist;
apps/graphics/ft80x: Add support for reading/writing multiple registers. Add interface to obtain the touchscreen transform matrix. apps/examples/ft80x: Add more co-processor demos.
2018-02-21 18:50:06 +01:00
cmds.b.fgcolor.c = 0x333234;
cmds.b.bgcolor.c = 0x808080;
cmds.b.colorrgb.cmd = FT80X_COLOR_RGB(0xff, 0xff, 0xff);
cmds.b.toggle.y = yoffset;
cmds.b.toggle.state = 0.75 * 65535;
ret = ft80x_dl_data(fd, buffer, &cmds.b, sizeof(cmds.b));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "exit""\xff""init");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* Finally, terminate the display list */
ret = ft80x_dl_end(fd, buffer);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_end failed: %d\n", ret);
}
return ret;
}
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 22:42:47 +01:00
/****************************************************************************
* Name: ft80x_coproc_number
*
* Description:
* Demonstrate the number widget
*
****************************************************************************/
int ft80x_coproc_number(int fd, FAR struct ft80x_dlbuffer_s *buffer)
{
int ret;
/* Formatted output chunks */
union
{
struct
{
struct ft80x_cmd32_s clearrgb;
struct ft80x_cmd32_s clear;
struct ft80x_cmd32_s colorrgb;
} a;
struct
{
struct ft80x_cmd32_s numcolor;
struct ft80x_cmd_number_s number;
struct ft80x_cmd32_s txtcolor;
struct ft80x_cmd_text_s text;
} b;
} cmds;
/* Create the hardware display list */
ret = ft80x_dl_start(fd, buffer, true);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_start failed: %d\n", ret);
return ret;
}
cmds.a.clearrgb.cmd = FT80X_CLEAR_COLOR_RGB(64, 64, 64);
cmds.a.clear.cmd = FT80X_CLEAR(1 ,1, 1);
cmds.a.colorrgb.cmd = FT80X_COLOR_RGB(0xff, 0xff, 0xff);
ret = ft80x_dl_data(fd, buffer, &cmds.a, sizeof(cmds.a));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
/* Draw number at 0,0 location */
cmds.b.numcolor.cmd = FT80X_CLEAR_COLOR_RGB(0x00, 0x00, 0x80);
cmds.b.number.cmd = FT80X_CMD_NUMBER;
cmds.b.number.x = 0;
cmds.b.number.y = 40;
cmds.b.number.font = 29;
cmds.b.number.options = 0;
cmds.b.number.n = 1234;
cmds.b.txtcolor.cmd = FT80X_CLEAR_COLOR_RGB(0xff, 0xff, 0xff);
cmds.b.text.cmd = FT80X_CMD_TEXT; /* Text */
cmds.b.text.x = 0;
cmds.b.text.y = 40;
cmds.b.text.font = 26;
cmds.b.text.options = 0;
ret = ft80x_dl_data(fd, buffer, &cmds.b, sizeof(cmds.b));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "Number29 at 0,0");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* Number with centerx */
cmds.b.numcolor.cmd = FT80X_CLEAR_COLOR_RGB(0x80, 0x00, 0x00);
cmds.b.number.x = FT80X_DISPLAY_WIDTH / 2;
cmds.b.number.y = 50;
cmds.b.number.options = FT80X_OPT_CENTERX | FT80X_OPT_SIGNED;
cmds.b.number.n = -1234;
cmds.b.text.x = FT80X_DISPLAY_WIDTH / 2 - 30;
cmds.b.text.y = 90;
ret = ft80x_dl_data(fd, buffer, &cmds.b, sizeof(cmds.b));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "Number29 at CenterX");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* Number with centery */
cmds.b.numcolor.cmd = FT80X_CLEAR_COLOR_RGB(0x41, 0x01, 0x05);
cmds.b.number.x = FT80X_DISPLAY_WIDTH / 5;
cmds.b.number.y = 120;
cmds.b.number.options = FT80X_OPT_CENTERY;
cmds.b.number.n = 1234;
cmds.b.text.x = FT80X_DISPLAY_WIDTH / 5;
cmds.b.text.y = 140;
ret = ft80x_dl_data(fd, buffer, &cmds.b, sizeof(cmds.b));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "Number29 at CenterY");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* Number with center */
cmds.b.numcolor.cmd = FT80X_CLEAR_COLOR_RGB(0x0b, 0x07, 0x21);
cmds.b.number.x = FT80X_DISPLAY_WIDTH / 2;
cmds.b.number.y = 180;
cmds.b.number.options = FT80X_OPT_CENTER | FT80X_OPT_SIGNED;
cmds.b.number.n = -1234;
cmds.b.text.x = FT80X_DISPLAY_WIDTH / 2 - 50;
cmds.b.text.y = 200;
ret = ft80x_dl_data(fd, buffer, &cmds.b, sizeof(cmds.b));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "Number29 at Center");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* Number with rightx */
cmds.b.numcolor.cmd = FT80X_CLEAR_COLOR_RGB(0x57, 0x5e, 0x1b);
cmds.b.number.x = FT80X_DISPLAY_WIDTH;
cmds.b.number.y = 60;
cmds.b.number.options = FT80X_OPT_RIGHTX;
cmds.b.number.n = 1234;
cmds.b.text.x = FT80X_DISPLAY_WIDTH - 100;
cmds.b.text.y = 100;
ret = ft80x_dl_data(fd, buffer, &cmds.b, sizeof(cmds.b));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "Number29 at RightX");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
/* Finally, terminate the display list */
ret = ft80x_dl_end(fd, buffer);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_end failed: %d\n", ret);
}
return ret;
}
apps/graphics/ft80x: Add support for reading/writing multiple registers. Add interface to obtain the touchscreen transform matrix. apps/examples/ft80x: Add more co-processor demos.
2018-02-21 18:50:06 +01:00
/****************************************************************************
* Name: ft80x_coproc_calibrate
*
* Description:
* Demonstrate the calibrate widget
*
****************************************************************************/
int ft80x_coproc_calibrate(int fd, FAR struct ft80x_dlbuffer_s *buffer)
{
uint32_t matrix[6];
int ret;
/* Formatted output chunks */
union
{
struct
{
struct ft80x_cmd32_s clearrgb;
struct ft80x_cmd32_s clear;
struct ft80x_cmd32_s colorrgb;
struct ft80x_cmd_text_s text;
} a;
struct ft80x_cmd_calibrate_s calib;
} cmds;
/* Create the hardware display list */
ret = ft80x_dl_start(fd, buffer, true);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_start failed: %d\n", ret);
return ret;
}
cmds.a.clearrgb.cmd = FT80X_CLEAR_COLOR_RGB(64, 64, 64);
cmds.a.clear.cmd = FT80X_CLEAR(1 ,1, 1);
cmds.a.colorrgb.cmd = FT80X_COLOR_RGB(0xff, 0xff, 0xff);
cmds.a.text.cmd = FT80X_CMD_TEXT; /* Text */
apps/examples/ft80x: Add another co-processor demos.
2018-02-21 22:42:47 +01:00
cmds.a.text.x = FT80X_DISPLAY_WIDTH / 2;
apps/graphics/ft80x: Add support for reading/writing multiple registers. Add interface to obtain the touchscreen transform matrix. apps/examples/ft80x: Add more co-processor demos.
2018-02-21 18:50:06 +01:00
cmds.a.text.y = FT80X_DISPLAY_HEIGHT / 2;
cmds.a.text.font = 27;
cmds.a.text.options = FT80X_OPT_CENTER;
ret = ft80x_dl_data(fd, buffer, &cmds.a, sizeof(cmds.a));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "Please Tap on the dot");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
cmds.calib.cmd = FT80X_CMD_CALIBRATE;
cmds.calib.result = 0;
ret = ft80x_dl_data(fd, buffer, &cmds.calib, sizeof(cmds.calib));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
/* Terminate the display list */
apps/graphics/ft80x: Add capabilitilies to send commands to the co-processor outside of the context of a display list. apps/examples/ft80x: Add another copressor example.. spinner animation.
2018-02-22 17:01:50 +01:00
ret = ft80x_dl_flush(fd, buffer, true);
apps/graphics/ft80x: Add support for reading/writing multiple registers. Add interface to obtain the touchscreen transform matrix. apps/examples/ft80x: Add more co-processor demos.
2018-02-21 18:50:06 +01:00
if (ret < 0)
{
apps/graphics/ft80x: Add capabilitilies to send commands to the co-processor outside of the context of a display list. apps/examples/ft80x: Add another copressor example.. spinner animation.
2018-02-22 17:01:50 +01:00
ft80x_err("ERROR: ft80x_dl_flush failed: %d\n", ret);
apps/graphics/ft80x: Add support for reading/writing multiple registers. Add interface to obtain the touchscreen transform matrix. apps/examples/ft80x: Add more co-processor demos.
2018-02-21 18:50:06 +01:00
return ret;
}
/* Get the calibration results */
ret = ft80x_touch_gettransform(fd, matrix);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_touch_gettransform failed: %d\n", ret);
return ret;
}
ft80x_info("Transform A-F: {%08lx, %08lx, %08lx, %08lx, %08lx, %08lx}\n",
matrix[0], matrix[1], matrix[2], matrix[3], matrix[4], matrix[5]);
return OK;
}
apps/graphics/ft80x: Add routine to wait for logo animation to complete. apps/examples/ft80x: Add more graphic demonstrations.
2018-02-22 02:17:28 +01:00
/****************************************************************************
apps/graphics/ft80x: Add capabilitilies to send commands to the co-processor outside of the context of a display list. apps/examples/ft80x: Add another copressor example.. spinner animation.
2018-02-22 17:01:50 +01:00
* Name: ft80x_coproc_spinner
apps/graphics/ft80x: Add routine to wait for logo animation to complete. apps/examples/ft80x: Add more graphic demonstrations.
2018-02-22 02:17:28 +01:00
*
* Description:
apps/graphics/ft80x: Add capabilitilies to send commands to the co-processor outside of the context of a display list. apps/examples/ft80x: Add another copressor example.. spinner animation.
2018-02-22 17:01:50 +01:00
* Demonstrate the spinner widget
apps/graphics/ft80x: Add routine to wait for logo animation to complete. apps/examples/ft80x: Add more graphic demonstrations.
2018-02-22 02:17:28 +01:00
*
****************************************************************************/
apps/graphics/ft80x: Add capabilitilies to send commands to the co-processor outside of the context of a display list. apps/examples/ft80x: Add another copressor example.. spinner animation.
2018-02-22 17:01:50 +01:00
int ft80x_coproc_spinner(int fd, FAR struct ft80x_dlbuffer_s *buffer)
apps/graphics/ft80x: Add routine to wait for logo animation to complete. apps/examples/ft80x: Add more graphic demonstrations.
2018-02-22 02:17:28 +01:00
{
int ret;
apps/graphics/ft80x: Add capabilitilies to send commands to the co-processor outside of the context of a display list. apps/examples/ft80x: Add another copressor example.. spinner animation.
2018-02-22 17:01:50 +01:00
/* Formatted output chunks */
apps/graphics/ft80x: Add routine to wait for logo animation to complete. apps/examples/ft80x: Add more graphic demonstrations.
2018-02-22 02:17:28 +01:00
apps/graphics/ft80x: Add capabilitilies to send commands to the co-processor outside of the context of a display list. apps/examples/ft80x: Add another copressor example.. spinner animation.
2018-02-22 17:01:50 +01:00
union
{
struct
{
struct ft80x_cmd32_s clearrgb;
struct ft80x_cmd32_s clear;
struct ft80x_cmd32_s colorrgb;
} a;
struct
{
struct ft80x_cmd32_s colorrgb;
struct ft80x_cmd_spinner_s spinner;
} b;
struct ft80x_cmd_spinner_s spinner;
struct ft80x_cmd_text_s text;
struct ft80x_cmd32_s stop;
} cmds;
/* Create the hardware display list */
ret = ft80x_dl_start(fd, buffer, true);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_start failed: %d\n", ret);
return ret;
}
cmds.a.clearrgb.cmd = FT80X_CLEAR_COLOR_RGB(64, 64, 64);
cmds.a.clear.cmd = FT80X_CLEAR(1 ,1, 1);
cmds.a.colorrgb.cmd = FT80X_COLOR_RGB(0xff, 0xff, 0xff);
ret = ft80x_dl_data(fd, buffer, &cmds.a, sizeof(cmds.a));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
cmds.text.cmd = FT80X_CMD_TEXT; /* Text */
cmds.text.x = FT80X_DISPLAY_WIDTH / 2;
cmds.text.y = 20;
cmds.text.font = 27;
cmds.text.options = FT80X_OPT_CENTER;
ret = ft80x_dl_data(fd, buffer, &cmds.text, sizeof(cmds.text));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "Spinner circle");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
cmds.text.y = 80;
ret = ft80x_dl_data(fd, buffer, &cmds.text, sizeof(cmds.text));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "Please Wait ...");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
cmds.spinner.cmd = FT80X_CMD_SPINNER;
cmds.spinner.x = FT80X_DISPLAY_WIDTH / 2;
cmds.spinner.y = FT80X_DISPLAY_HEIGHT / 2;
cmds.spinner.style = 0;
cmds.spinner.scale = 1;
ret = ft80x_dl_data(fd, buffer, &cmds.spinner, sizeof(cmds.spinner));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
/* Flush the local display buffer to hardware and reset the display list. */
ret = ft80x_dl_flush(fd, buffer, true);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_flush failed: %d\n", ret);
}
sleep(1);
/* Spinner with style 1 and scale 1 */
/* Start a new the hardware display list */
ret = ft80x_dl_start(fd, buffer, true);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_start failed: %d\n", ret);
return ret;
}
cmds.a.clearrgb.cmd = FT80X_CLEAR_COLOR_RGB(64, 64, 64);
cmds.a.clear.cmd = FT80X_CLEAR(1 ,1, 1);
cmds.a.colorrgb.cmd = FT80X_COLOR_RGB(0xff, 0xff, 0xff);
ret = ft80x_dl_data(fd, buffer, &cmds.a, sizeof(cmds.a));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
cmds.text.cmd = FT80X_CMD_TEXT; /* Text */
cmds.text.x = FT80X_DISPLAY_WIDTH / 2;
cmds.text.y = 20;
cmds.text.font = 27;
cmds.text.options = FT80X_OPT_CENTER;
ret = ft80x_dl_data(fd, buffer, &cmds.text, sizeof(cmds.text));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "Spinner line");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
cmds.text.y = 80;
ret = ft80x_dl_data(fd, buffer, &cmds.text, sizeof(cmds.text));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "Please Wait ...");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
cmds.b.colorrgb.cmd = FT80X_COLOR_RGB(0x00, 0x00, 0x80);
cmds.b.spinner.cmd = FT80X_CMD_SPINNER;
cmds.b.spinner.x = FT80X_DISPLAY_WIDTH / 2;
cmds.b.spinner.y = FT80X_DISPLAY_HEIGHT / 2;
cmds.b.spinner.style = 1;
cmds.b.spinner.scale = 1;
ret = ft80x_dl_data(fd, buffer, &cmds.spinner, sizeof(cmds.spinner));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
/* Flush the local display buffer to hardware and reset the display list. */
ret = ft80x_dl_flush(fd, buffer, true);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_flush failed: %d\n", ret);
}
sleep(1);
/* Start a new the hardware display list */
ret = ft80x_dl_start(fd, buffer, true);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_start failed: %d\n", ret);
return ret;
}
cmds.a.clearrgb.cmd = FT80X_CLEAR_COLOR_RGB(64, 64, 64);
cmds.a.clear.cmd = FT80X_CLEAR(1 ,1, 1);
cmds.a.colorrgb.cmd = FT80X_COLOR_RGB(0xff, 0xff, 0xff);
ret = ft80x_dl_data(fd, buffer, &cmds.a, sizeof(cmds.a));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
cmds.text.cmd = FT80X_CMD_TEXT; /* Text */
cmds.text.x = FT80X_DISPLAY_WIDTH / 2;
cmds.text.y = 20;
cmds.text.font = 27;
cmds.text.options = FT80X_OPT_CENTER;
ret = ft80x_dl_data(fd, buffer, &cmds.text, sizeof(cmds.text));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "Spinner clockhand");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
cmds.text.y = 80;
ret = ft80x_dl_data(fd, buffer, &cmds.text, sizeof(cmds.text));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "Please Wait ...");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
cmds.b.colorrgb.cmd = FT80X_COLOR_RGB(0x80, 0x00, 0x00);
cmds.b.spinner.cmd = FT80X_CMD_SPINNER;
cmds.b.spinner.x = FT80X_DISPLAY_WIDTH / 2;
cmds.b.spinner.y = FT80X_DISPLAY_HEIGHT / 2 + 20;
cmds.b.spinner.style = 2;
cmds.b.spinner.scale = 1;
ret = ft80x_dl_data(fd, buffer, &cmds.spinner, sizeof(cmds.spinner));
apps/graphics/ft80x: Add routine to wait for logo animation to complete. apps/examples/ft80x: Add more graphic demonstrations.
2018-02-22 02:17:28 +01:00
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
apps/graphics/ft80x: Add capabilitilies to send commands to the co-processor outside of the context of a display list. apps/examples/ft80x: Add another copressor example.. spinner animation.
2018-02-22 17:01:50 +01:00
/* Flush the local display buffer to hardware and reset the display list. */
apps/graphics/ft80x: Add routine to wait for logo animation to complete. apps/examples/ft80x: Add more graphic demonstrations.
2018-02-22 02:17:28 +01:00
apps/graphics/ft80x: Add capabilitilies to send commands to the co-processor outside of the context of a display list. apps/examples/ft80x: Add another copressor example.. spinner animation.
2018-02-22 17:01:50 +01:00
ret = ft80x_dl_flush(fd, buffer, true);
apps/graphics/ft80x: Add routine to wait for logo animation to complete. apps/examples/ft80x: Add more graphic demonstrations.
2018-02-22 02:17:28 +01:00
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_flush failed: %d\n", ret);
apps/graphics/ft80x: Add capabilitilies to send commands to the co-processor outside of the context of a display list. apps/examples/ft80x: Add another copressor example.. spinner animation.
2018-02-22 17:01:50 +01:00
}
sleep(1);
/* Start a new the hardware display list */
ret = ft80x_dl_start(fd, buffer, true);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_start failed: %d\n", ret);
return ret;
}
cmds.a.clearrgb.cmd = FT80X_CLEAR_COLOR_RGB(64, 64, 64);
cmds.a.clear.cmd = FT80X_CLEAR(1 ,1, 1);
cmds.a.colorrgb.cmd = FT80X_COLOR_RGB(0xff, 0xff, 0xff);
ret = ft80x_dl_data(fd, buffer, &cmds.a, sizeof(cmds.a));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
cmds.text.cmd = FT80X_CMD_TEXT; /* Text */
cmds.text.x = FT80X_DISPLAY_WIDTH / 2;
cmds.text.y = 20;
cmds.text.font = 27;
cmds.text.options = FT80X_OPT_CENTER;
ret = ft80x_dl_data(fd, buffer, &cmds.text, sizeof(cmds.text));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
ret = ft80x_dl_string(fd, buffer, "Spinner two dots");
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_string failed: %d\n", ret);
return ret;
}
cmds.text.y = 80;
ret = ft80x_dl_data(fd, buffer, &cmds.text, sizeof(cmds.text));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
cmds.b.colorrgb.cmd = FT80X_COLOR_RGB(0x80, 0x00, 0x00);
cmds.b.spinner.cmd = FT80X_CMD_SPINNER;
cmds.b.spinner.x = FT80X_DISPLAY_WIDTH / 2;
cmds.b.spinner.y = FT80X_DISPLAY_HEIGHT / 2 + 20;
cmds.b.spinner.style = 3;
cmds.b.spinner.scale = 1;
ret = ft80x_dl_data(fd, buffer, &cmds.spinner, sizeof(cmds.spinner));
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_data failed: %d\n", ret);
return ret;
}
/* Flush the local display buffer to hardware and reset the display list. */
ret = ft80x_dl_flush(fd, buffer, true);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_dl_flush failed: %d\n", ret);
}
sleep(1);
/* Send the stop command */
cmds.stop.cmd = FT80X_CMD_STOP;
ret = ft80x_coproc_send(fd, &cmds.stop.cmd, 1);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_coproc_send failed: %d\n", ret);
return ret;
}
return ret;
}
/****************************************************************************
* Name: ft80x_coproc_logo
*
* Description:
* Demonstrate the logo command. The logo command causes the co-processor
* engine to play back a short animation of the FTDI logo. During logo
* playback the MCU should not access any FT800 resources.
*
****************************************************************************/
int ft80x_coproc_logo(int fd, FAR struct ft80x_dlbuffer_s *buffer)
{
struct ft80x_cmd_logo_s logo;
int ret;
/* Send the logo command (no display list is used) */
logo.cmd = FT80X_CMD_LOGO;
ret = ft80x_coproc_send(fd, &logo.cmd, 1);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_coproc_send failed: %d\n", ret);
apps/graphics/ft80x: Add routine to wait for logo animation to complete. apps/examples/ft80x: Add more graphic demonstrations.
2018-02-22 02:17:28 +01:00
return ret;
}
/* Wait for the logo animation to complete. */
ret = ft80x_coproc_waitlogo(fd);
if (ret < 0)
{
ft80x_err("ERROR: ft80x_coproc_waitlogo failed: %d\n", ret);
}
return ret;
}
Reference in New Issue Copy Permalink