From 108e0571966422a5891627b9277f2a76e223d566 Mon Sep 17 00:00:00 2001 From: Gregory Nutt Date: Fri, 24 Apr 2020 12:43:14 -0600 Subject: [PATCH] Remove the obsolete ChangeLog.txt file We do not intend to update the ChangeLog.txt file for releases past 8.2. It used to be a stepping stone between the 'git log' and the ReleaseNotes. However, it no longer serves that purpose. In fact it has no purpose at all; all of the change history is in the 'git log'. That is where people look for historical information, not in the obsolete ChangeLog. --- ChangeLog.txt | 4567 ------------------------------------------------- 1 file changed, 4567 deletions(-) delete mode 100644 ChangeLog.txt diff --git a/ChangeLog.txt b/ChangeLog.txt deleted file mode 100644 index 556923ec4..000000000 --- a/ChangeLog.txt +++ /dev/null @@ -1,4567 +0,0 @@ -5.19 2011-03-12 Gregory Nutt - - * Initial version of the apps/ directory was released as contributed by - Uros Platise. - -6.0 2011-03-21 Gregory Nutt - - * README.txt -- README cosmetics - * hello/ -- hello world minor changes - * Makefile -- Makefile cosmetics (I am slowly adding the Darjeeling JVM) - * Make.defs -- New file adds common make definitions for applications. - * hello/Makefile -- Now uses new Make.defs definitions. Added README.txt. - * apps/poweroff -- New application to turn off board power. - * Moved NSH library, netutils, and examples from the nuttx/ directory to - the apps/ directory - * Moved exec_nuttapp machinery into the nuttapp/ directory. - -6.1 2011-04-10 Gregory Nutt - - * Creation of auto-generated header files now occurs during the context - build phase. - * Added sdcard insert and eject, nsh command '?' and some code remarks - * Renamed nuttapp to namedapp - * namedapp/binfs.c -- Create a tiny filesystem that can be used - to show the internal named apps under /bin. - * Numerous fixes to build system required to support building with native - Windows toolchain. - -6.2 2011-05-06 Gregory Nutt - - * apps/examples/nxffs: Add a test a a configuration that will be used to - verify NXFFS. - -6.3 2011-05-15 Gregory Nutt - - * apps/interpreter: Add a directory to hold interpreters. The Pascal add- - on module now installs and builds under this directory. - * apps/interpreter/ficl: Added logic to build Ficl (the "Forth Inspired - Command Language"). See http://ficl.sourceforge.net/. - * apps/netutils/dhcpc, dhcpcd, and tftp. If these directories are included - in the configuration but CONFIG_NET_UDP is disable (which is not very wise), - then a make error occurs because tools/mkdep.sh is called with no files. - * system/free: Move Uros' custom free command from vsn/free - * system/install: Add a new install command submitted by Uros Platise. - * examples/rgmp. Add a placeholder for an RGMP build example. - RGMP is a project for running GPOS and RTOS simultaneously on - multi-processor platforms. See http://rgmp.sourceforge.net/wiki/index.php/Main_Page - for further information about RGMP. NOTE: This is an empty example - on initial check-in. - -6.4 2011-06-06 Gregory Nutt - - * nshlib/nsh_netcmds.c: If a network device name and IP address are provided - with the ifconfig command, then this command will now set the network address. - (Contributed by Yu Qiang). - * netutils/ftpc: A library to support client-side FTP. - * examples/ftpc: A simple add-on to the NSH. From NSH, you can start - this simple FTP shell to transfer files to/from a remote FTP server. - -6.5 2011-06-21 Gregory Nutt - - * netutils/ftpc: Simpflication and size reduction. - -6.6 2011-07-11 Gregory Nutt - - * Make.defs, namedapp/namedapp.c: Several structural changes made to get a - clean compile under the ez80 ZDS-II toolchain (no design changes). - * apps/examples/buttons: Add a test for the new standardized button interfaces - * apps/examples/nxtext: Add another NX graphics test. This one focus on - placing text on the background while pop-up windows occur. Text should - continue to update normally with or without the popup windows present. - -6.7 2011-08-02 Gregory Nutt - - * apps/examples/nx and nxtext: These examples can now be built as NSH - "built-in" commands. - * apps/examples/nxhello: The simplest graphics example: It just says - "Hello, World!" in the center of the display. This example can also be - built as an NSH "built-in" command. - * apps/examples/nx, ntext, and nxhello: All updated to use the new - NuttX font interfaces. - * apps/examples/nximage: Another super simple graphics example: It just puts - the NuttX logo in the center of the display. This example can also be - built as an NSH "built-in" command. - * apps/examples/usbstorage: Can now be built as two NSH "built-in" commands: - 'msconn' will connect the USB mass storage device; 'msdis' will disconnect - the USB storage device. - * apps/examples/nx*: All NX header files moved from nuttx/include/nuttx to - nuttx/include/nuttx/nx. - * apps/examples/usbstorage: Added instrumentation to monitor memory usage - to check for memory leaks in the USB storage driver. - * apps/examples/nxhello/nxhello_bkgd.c: Fix handling of allocated glyph - memory. - -6.8 2011-08-11 Gregory Nutt - - * apps/examples/nxlines: Added a test for NX line drawing capabilities. - -6.9 2011-09-11 Gregory Nutt - - * apps/examples/nxlines: Extend the line drawing text to include drawing - of circles. - * apps/system/i2c: Add an I2C test tool that should help to bring up I2C - devices (when it is fully functional). - * apps/nshlib/nsh_timcmds.c: Add the date command that can be used to - show or set the time (only if CONFIG_RTC is set). - -6.10 2011-10-06 Gregory Nutt - - * apps/system/i2c: Add repetition and address auto-incrementing so that - and command can be executed numerous times. Add a new verify command - that will write to a register, read from register, and verify that - returned value. - * apps/graphics/tiff: Add a library that can be used to create TIFF files. - * apps/examples/tiff: Add a unit test for the TIFF file creation logic - * apps/examples/lcdrw: Add a test to verify if you can or can or read - data from an LCD correctly. - * apps/examples/usbterm: A USB terminal example.. more of a USB chat or - serial bridge: Data received on local console echoed via USB serial; - data received on USB serial is echoed on the local console. - * apps/examples/touchscreen: Add a simple, generic test for any - touschscreen driver. - * Makefile: The apps/ Makefile now checks for an apps/external directory - or symbolic link. If such a directory/link exists (and has a Makefile), - it will be added to the apps/ build. This allows external directories - to be included into the apps/ build by simply creating a symbolic link. - -6.11 2011-11-12 Gregory Nutt - - (No major changes from 6.10) - -6.12 2011-12-06 Gregory Nutt - - * apps/examples/buttons: The button test can now be executed as an NSH - built in command. - -6.13 2012-12-26 Gregory Nutt - - * apps/examples/dhcpd: May now be built as an NSH built-in application - by setting CONFIG_NSH_BUILTIN_APPS. - * apps/netutils/dhcpd/dhcpd.c: Fix several problems using host order address - where network addresses expected (and vice versa). - * apps/examples/nettest: May now be built as an NSH built-in application - by setting CONFIG_NSH_BUILTIN_APPS. - * apps/examples/nettest: Correct some build issues with the nettest is - built for performance evaluation. - * apps/examples/adc: Add a very simple test to drive and test an ADC - driver. - * apps/examples/pwm: Add an NSH PWM command to drive and test a PWM - driver. - * apps/examples/can: Add an NSH CAN command to drive and test a CAN - driver in loopback mode. - -6.14 2012-01-15 Gregory Nutt - - * apps/examples/buttons/main.c: The test needs to call up_buttoninit() to - properly configure the button interrupt GPIOs. - * apps/examples/pwm: Add support to test the pulse count option recently - added to the PWM interface. - -6.15 2012-02-12 Gregory Nutt - - * apps/nshlib/nsh_serial.c and nsh_usbdev.c: If NuttX is configured to use - a USB serial console, then NSH needs to wait until the USB console is - connected and available. - * apps/examples/composite: Add a test of the USB composite device. - * apps/examples/Telnetd: Move the tiny uIP shell example from - netutils/Telnetd to examples/Telnetd. Enhanced the Telnetd daemon so that - it supports Telnetd via a TTY device driver: A new TTY device driver is - created when each new Telnet connection is created. The shell thread - is started with stdin, stdout, and stderr mapped to the TTY device. - * netutils/Telnetd: The old uIP Telnet demo is gone. In its place is a new - Telnet infrastructure. The new Telnet daemon creates sessions that are - "wrapped" as character devices and mapped to stdin, stdout, and stderr. - Now the Telnet session can be inherited by spawned tasks. - * examples/Telnetd: Add a test for the new Telnet daemon. - * examples/Telnetd/telnetd_driver.c: Move the internal socket structure from - the daemon's socket array into the driver's state data so that it will be - independent from the Telnetd daemon. - * apps/system/readline: Moved the old nuttx/lib/stdio/lib_fgets.c here - and renamed it as readline(). The old fgets was simplied and the overloaded - readline functionality was removed. - * apps/netutils/ftpd: Add an FTPD server (does not even compile on initial - checkin). - * apps/examples/ftpd: Add a test for the FTPD server (untest on initial - check-in). - * apps/nshlib/nsh_fscmds.c: Add support for a 'dmesg' command that will - dump the system log if CONFIG_SYSLOG is selected. - -6.16 2012-03-10 Gregory Nutt - - * apps/examples/qencoder: Add a quadrature driver test. - * apps/examples/ostest/fpu.c: Add a test to verify that FPU registers - are properly saved and restored on context switches. - * apps/system/readline/readline.c: readline() will now treat either a - backspace or a DEL character as a backspace (i.e., deleting the character - to the left of the cursor). This makes NSH less dependent on particular - keyboard mappings of the Backspace key. Submitted by Mike Smith. - * apps/system/cdcacm: An example that illustrates how the CDC/ACM driver - may to connected and disconnected through software control. - * apps/examples/nsh/nsh_main.c: If available, call up_cxxinitialize() to - initialize all statically defined C++ classes. - * apps/nshlib: Now supports a USB serial device for NSH console I/O. This - allows NSH to be used on boards that have USB but no serial connectors. - -6.17 2012-04-14 Gregory Nutt - - * apps/examples/can: Add conditional compilation so that the test can be - configured to only send messages or to only receive messages. This will - let the test work in other modes than simple loopback testing. - * apps/examples/hello and apps/examples/ostest: Can now be built as NSH - built-int functions. - * vsn/hello: Removed. The modified apps/examples/hello is enough "Hello, - World!" - * apps/examples/nxconsole: Add a test of the NX console device. - * apps/examples/nxconsole: The NX console example now supports running - the NuttShell (NSH) within an NX window. - * apps/system/readline: Now uses standard definitions from - include/nuttx/ascii.h and vt100.h - * Kconfig, */Kconfig: Added skeleton Kconfig files to all directories that - may need them. - -6.18 2012-05-19 Gregory Nutt - - * Kconfig: Continued Kconfig file updates (no longer tracking on a per-file - basis in the ChangeLog) - * apps/examples/watchdog: Add a watchdog timer example. - * apps/examples/tiff: Fix wrong path used for temporary file. - * apps/examples/touchscreen: Standardize the board-specific, touchscreen - initialization interfaces. - -6.19 2012-06-15 Gregory Nutt - - * apps/nshlib/nsh_usbdev.c: Add the capability to use an arbitrary USB - device as the console (not necessarily /dev/console). This is a useful - option because then you can still use the serial console to debug with. - * apps/nshlib/nsh_usbdev.c: User now has to press ENTER 3 times before - USB console will start. Otherwise, the USB console starts before there - is anyone at the other end to listen. - * apps/nshlib/nsh_usbdev.c and nsh_consolemain.c: Add support for the USB - capability when a USB console is used. - * apps/nshlib/nsh_fscmds.c: Add the 'mv' command - -6.20 2012-07-12 Gregory Nutt - - * namedapp/exec_namedapp.c - Correct an error when round robin scheduling - is enabled. The priority of the new, named application was erroneously - being set to the priority of the parent thread; losing its configured - priority. Reported by Mike Smith. - -6.21 2012-08-25 Gregory Nutt - - * apps/include/: Stylistic clean-up of all header files. - * apps/modbus and apps/include/modbus: A port of freemodbus-v1.5.0 - has been added to the NuttX apps/ source tree. - * apps/examples/modbus: A port of the freemodbus-v1.5.0 "demo" - program that will be used to verify the FreeModBus port - * apps/modbus: Don't use strerror(). It is just too big. - * apps/modbus: Add CONFIG_MB_TERMIOS. If the driver doesn't support - termios ioctls, then don't bother trying to configure the baud, parity - etc. - * apps/nshlib: If waitpid() is supported, then NSH now catches the - return value from spawned applications (provided by Mike Smith) - * apps/nshlib: Lock the scheduler while starting built-in applications - in order to eliminate race conditions (also from Mike Smith). - * apps/examples/adc, pwm, and qencoder: Add support for testing - devices with multiple ADC, PWM, and QE devices. - * apps/nshlib/nsh_mntcmds.c: Separated mount-related commands out of - nsh_fscmds.c. Extended to the mount command so that if no arguments - are provided, then the current mountpoints are enumerated. - * apps/nshlib/nsh_mntcmds.c: Add an NSH df command to list the - properties of mounted file systems. - * apps/nshlib/nsh_parse.c: Extend help command options. 'help' with - no arguments outputs a short list of commands. With -v lists all - command line details. A command name can be added to just get - help on one command. - * system/readline.c: If character input/output is interrupted by a - signal, then readline() will try the read/write again. - * apps/*/Make.defs: Numerous fixes needed to use the automated - configuration (from Richard Cochran). - -6.22 2012-09-29 Gregory Nutt - - * apps/netutils/thttpd/thttpd_cgi.c: Missing NULL in argv[] - list (contributed by Kate). - * apps/nshlib/nsh_parse.c: CONFIG_NSH_DISABLE_WGET not CONFIG_NSH_DISABLE_GET - in one location (found by Kate). - * apps/examples/ostest/prioinherit.c: Limit the number of test - threads to no more than 3 of each priority. Bad things happen - when the existing logic tried to created several hundred test - threads! - * apps/nshlib/nsh.h: Both CONFIG_LIBC_STRERROR and CONFIG_NSH_STRERROR - must be defined to use strerror() with NSH. - * apps/examples/*/*_main.c, system/i2c/i2c_main.c, and others: Added - configuration variable CONFIG_USER_ENTRYPOINT that may be used to change - the default entry from user_start to some other symbol. Contributed by - Kate. - * apps/netutils/webserver/httpd/c: Fix a typo that as introduced in - version r4402: 'lese' instead of 'else' (Noted by Max Holtzberg). - * tools/mkfsdata.pl: The uIP web server CGI image making perl script was - moved from apps/netutils/webserver/makefsdata to nuttx/tools/mkfsdata.pl - (Part of a larger change submitted by Max Holtzberg). - * apps/netutils/webserver, apps/examples/uip, and apps/include/netutils/httpd.h: - The "canned" version of the uIP web servers content that was at - netutils/webserver/httpd_fsdata.c has been replaced with a dynamically - built configuration located at apps/examples/uip (Contributed by - Max Holtzberg). - * apps/netutils/webserver: Several inenhancements from Kate including the - ability to elide scripting and SERVER headers and the ability to map - files into memory before transferring them. - * apps/netutils/webserver: Add ability to map a URL to CGI function. - Contributed by Kate. - * apps/nshlib/nsh_mntcmds.c: The changes of 6.21 introduced holes in the - error handling: Now the number of arguments to mount can be 0 or 4. - Additional parameter checking is required to prevent mysterious errors - (submiteed by Kate). - * apps/netutils/webserver/httpd_mmap.c: Fix errors when the mmap() - length is zero (submitted by Kate). - * apps/netutils/webserver/httpd_sendfile.c: Add and option, - CONFIG_NETUTILS_HTTPD_SENDFILE to transfer files using the NuttX - sendfile() interface. - * apps/netutils/discover: A UDP network discovery utility contributed - by Max Holtzberg. - * apps/examples/discover: A test example for the UDP network discovery - utility (also contribed by Max Holtzberg). - * apps/examples/*/main.c: Too many files called main.c. Each renamed - to something unique so that they will not collide in the archive. - * apps/netutils/xmlrpc: The Embeddable Lightweight XML-RPC Server - discussed at http://www.drdobbs.com/web-development/\ - an-embeddable-lightweight-xml-rpc-server/184405364. Contributed by - Max Holtzberg. - * apps/netutils/uip_listenon.c: Logic in uip_server.c that creates - the listening socket was moved to this new file to support re-use. - Contributed by Kate. - * apps/netutils/webserver/httpd.c: The option CONFIG_NETUTILS_HTTPD_SINGLECONNECT - can now be used to limit the server to a single thread. Option - CONFIG_NETUTILS_HTTPD_TIMEOUT can be used to generate HTTP 408 errors. - Both from Kate. - * apps/netutils/webserver/httpd.c: Improvements to HTTP parser from - Kate. - * apps/netutils/webserver/httpd.c: Add support for Keep-alive connections - (from Kate). - * apps/NxWidget/Kconfig: This is a kludge. I created this NxWidgets - directory that ONLY contains Kconfig. NxWidgets does not live in - either the nuttx/ or the apps/ source trees. This kludge makes it - possible to configure NxWidgets/NxWM without too much trouble (with - the tradeoff being a kind ugly structure and some maintenance issues). - * apps/examples/Make.defs: Missing support for apps/examples/watchdog. - * apps/NxWidgets/Kconfig: Add option to turn on the memory monitor - feature of the NxWidgets/NxWM unit tests. - -6.23 2012-11-05 Gregory Nutt - - * vsn: Moved all NSH commands from vsn/ to system/. Deleted the vsn/ - directory. - * Makefile: Change order of includes when CONFIG_NEWCONFIG=y. In - that case, namedapp must be included first so that the namedapp - context is established first. If the namedapp context is established - later, it will overwrite any existing namedapp_list.h and nameapp_proto.h - files. - * CONFIG_EXAMPLES_*: To make things consistent, changed all occurrences - of CONFIG_EXAMPLE_* to CONFIG_EXAMPLES_*. - * Kconfig: Fleshed out apps/examples/adc/Kconfig and apps/examples/wget/Kconfig. - There are still a LOT of empty, stub Kconfig files. - * Kconfig: Fleshed out apps/examples/buttons/Kconfig. There are still a LOT - of empty, stub Kconfig files. - * apps/netutils/webserver/httpd.c: Fix a bug that I introduced in - recent check-ins (Darcy Gong). - * apps/netutils/webclient/webclient.c: Fix another but that I introduced - when I was trying to add correct handling for loss of connection (Darcy Gong) - * apps/nshlib/nsh_telnetd.c: Add support for login to Telnet session via - username and password (Darcy Gong). - * apps/netutils/resolv/resolv.c (and files using the DNS resolver): Various - DNS address resolution improvements from Darcy Gong. - * apps/nshlib/nsh_netcmds.c: The ping command now passes a maximum round - trip time to uip_icmpping(). This allows pinging of hosts on complex - networks where the ICMP ECHO round trip time may exceed the ping interval. - * apps/examples/nxtext/nxtext_main.c: Fix bad conditional compilation - when CONFIG_NX_KBD is not defined. Submitted by Petteri Aimonen. - * apps/examples/nximage/nximage_main.c: Add a 5 second delay after the - NX logo is presented so that there is time for the image to be verified. - Suggested by Petteri Aimonen. - * apps/Makefile: Small change that reduces the number of shell invocations - by one (Mike Smith). - * apps/examples/elf: Test example for the ELF loader. - * apps/examples/elf: The ELF module test example appears fully functional. - * apps/netutils/json: Add a snapshot of the cJSON project. Contributed by - Darcy Gong. - * apps/examples/json: Test example for cJSON from Darcy Gong - * apps/nshlib/nsh_netinit.c: Fix static IP DNS problem (Darcy Gong) - * apps/netutils/resolv/resolv.c: DNS fixes from Darcy Gong. - * COPYING: Licensing information added. - * apps/netutils/codec and include/netutils/urldecode.h, base64.h, and md5.h: - A port of the BASE46, MD5 and URL CODEC library from Darcy Gong. - * nsnlib/nsh_codeccmd.c: NSH commands to use the CODEC library. - Contributed by Darcy Gong. - * apps/examples/wgetjson: Test example contributed by Darcy Gong - * apps/examples/cxxtest: A test for the uClibc++ library provided by - Qiang Yu and the RGMP team. - * apps/netutils/webclient, apps/netutils.codes, and apps/examples/wgetjson: - Add support for wget POST interface. Contributed by Darcy Gong. - * apps/examples/relays: A relay example contributed by Darcy Gong. - * apps/nshlib/nsh_netcmds: Add ifup and ifdown commands (from Darcy - Gong). - * apps/nshlib/nsh_netcmds: Extend the ifconfig command so that it - supports setting IP addresses, network masks, name server addresses, - and hardware address (from Darcy Gong). - -6.24 2012-12-20 Gregory Nutt - - * apps/examples/ostest/roundrobin.c: Replace large tables with - algorithmic prime number generation. This allows the roundrobin - test to run on platforms with minimal SRAM (Freddie Chopin). - * apps/nshlib/nsh_dbgcmds.c: Add hexdump command to dump the contents - of a file (or character device) to the console Contributed by Petteri - Aimonen. - * apps/examples/modbus: Fixes from Freddie Chopin - * apps/examples/modbus/Kconfig: Kconfig logic for FreeModBus contributed - by Freddie Chopin. - * Makefile, */Makefile: Various fixes for Windows native build. Now uses - make foreach loops instead of shell loops. - * apps/examples/elf/test/*/Makefile: OSX doesn't support install -D, use - mkdir -p then install without the -D. From Mike Smith. - * apps/examples/relays/Makefile: Reduced stack requirement (Darcy Gong). - * apps/nshlib and apps/netutils/dhcpc: Extend the NSH ifconfig command plus - various DHCPC improvements(Darcy Gong). - * apps/nshlib/nsh_apps.c: Fix compilation errors when CONFIG_NSH_DISABLEBG=y. - From Freddie Chopin. - * Rename CONFIG_PCODE and CONFIG_FICL as CONFIG_INTERPRETERS_PCODE and - CONFIG_INTERPRETERS_FICL for consistency with other configuration naming. - * apps/examples/keypadtest: A keypad test example contributed by Denis - Carikli. - * apps/examples/elf and nxflat: If CONFIG_BINFMT_EXEPATH is defined, these - tests will now use a relative path to the program and expect the binfmt/ - logic to find the absolute path to the program using the PATH variable. - -6.25 2013-02-01 Gregory Nutt - - * Makefiles: Removed dependency of distclean on clean in most top-level - files. It makes sense for 'leaf' Makefiles to have this dependency, - but it does not make sense for upper-level Makefiles. - * apps/namedapp/: Renamed to builtins in preparation for another change. - * .context: Removed the .context kludge. This caused lots of problems - when changing configurations because there is no easy way to get the - system to rebuild the context. Now, the context will be rebuilt - whenever there is a change in either .config or the Makefile. - * apps/builtin/registry: Updated new built-in registration logic to handle - cases where (1) old apps/.config is used, and (2) applications ared - removed, not just added. - * apps/examples/nettest/Makefile: Fix an error that crept in during - some of the recent, massive build system changes. - * apps/builtin/Makefile: Need to have auto-generated header files - in place early in the dependency generation phase to avoid warnings. - It is not important if they are only stubbed out header files at - this build phase. - * apps/examples/hidbkd: Now supports decoding of encoded special keys - if CONFIG_EXAMPLES_HIDKBD_ENCODED is defined. - * apps/examples/hidbkd: Add support for decoding key release events - as well. However, the USB HID keyboard drier has not yet been - updated to detect key release events. That is kind of tricky in - the USB HID keyboard report data. - * apps/examples/wlan: Remove non-functional example. - * apps/examples/ostest/vfork.c: Added a test of vfork(). - * apps/exampes/posix_spawn: Added a test of posix_spawn(). - * apps/examples/ostest: Extend signal handler test to catch - death-of-child signals (SIGCHLD). - * apps/examples/ostest/waitpid.c: Add a test for waitpid(), waitid(), - and wait(). - * builtin/binfs.c: Add hooks for dup() method (not implemented). - * builtin/exec_builtin.c, nshlib/nsh_parse.c, and nshlib/nsh_builtin.c: - NSH now supports re-direction of I/O to files (but still not from). - * builtin/binfs.c: Greatly simplified (it is going to need to be - very lightweight). Now supports open, close, and a new ioctl to recover - the builtin filename. The latter will be needed to support a binfs - binfmt. - * builtin/binfs.c: Move apps/builtin/binfs.c to fs/binfs/fs_binfs.c - CONFIG_APPS_BINDIR rename CONFIG_FS_BINFS - * apps/include/builtin.h: Some of the content of - apps/include/apps.h moved to include/nuttx/binfmt/builtin.h. - apps/include/apps.h renamed builtin.h - * apps/builtin/exec_builtins.c: Move builtin - utility functions from apps/builtin/exec_builtins.c to - binfmt/libbuiltin/libbuiltin_utils.c - * apps/nshlib/nsh_mountcmds.c: The block driver/source - argument is now optional. Many files systems do not need - a source and it is really stupid to have to enter a bogus - source parameter. - * apps/nshlib/nsh_fileapp.c: Add the ability to execute a file - from a file system using posix_spawn(). - * apps/builtin/: Extensions from Mike Smith. - * apps/examples/ftpd/Makefile: Name ftpd_start is not the name of - the entrypoint. Should be ftpd_main (from Yan T.) - * apps/netutils/telnetd/telnetd_driver: Was stuck in a loop if - recv[from]() ever returned a value <= 0. - * apps/examples/nettest and poll: Complete Kconfig files. - * apps/examples/ostest/waitpid.c: Need to use WEXITSTATUS() - to decode the correct exit status. - * apps/system/usbmonitor: A daemon that can be used to monitor USB - trace outpout. - * apps/nshlib/nsh_usbdev.c, nsh_consolemain.c, nsh_session.c, nsh_script.c: - Add support for a login script. The init.d/rcS script will be executed - once when NSH starts; the .nshrc script will be executed for each session: - Once for serial, once for each USB connection, once for each Telnet - session. - * apps/system/readline: Correct readline() return value. Was not - any returning special values when end-of-file or read errors - occur (it would return an empty string which is not very useful). - -6.26 2013-03-15 Gregory Nutt - - * apps/builtin/exec_builtin.c: Now uses task_spawn() to start - builtin applications. - * Type of argv has changed from const char ** to char * const * - * apps/nshlib/nsh_parse.c: Fix memory lead: Need to detach after - creating a pthread. - * apps/examples and nshlib: Change name of _TCB to struct tcb_s to - match NuttX name change. - * apps/examples/ostest/restart.c: Add a test case to verify - task_restart(). - * apps/system/readline.c: readline() now returns EOF on any failure - (instead of a negated errno value). This is because the underlying - read is based on logic similar to getc. The value zero was being - confused with a NUL. So if a NUL was received, the NSH session - would terminate because it thought it was the end of file. - -6.27 2013-04-28 Gregory Nutt - - * apps/system/ramtest: Add a simple memory test (2013-03-26). - * apps/examples/ostest: In the non-cancelable thread test, we need - to give the thread an opportunity to run and to set the non- - cancelable state. - * apps/nshlib/nsh_ddcmd.c: Correct the test of the skip input - parameter. Was limiting the range to <= count. From Ken - Pettit (2014-4-24). - -6.28 2013-06-14 Gregory Nutt - - * apps/examples/mtdpart: Provides a simple test of MTD partitions. - * apps/nshlib/nsh_mntcmds.c: Add a -h option to the df command to show - the volume information in human readable form (Ken Pettit, 2013-4-30). - * apps/nshlib/nsh_fscmds.c: Add support for the mksmartfs command. - (Ken Pettit, 2013-4-30). - * apps/system/flash_eraseall: Add an interface to erase FLASH using a - flash_eraseall NSH command (Ken Pettit, 2013-5-1). - * apps/examples/flash_test and apps/examples/smart_test: Add tests of - the SMART block driver and file system (Ken Pettit, 2013-5-1). - * apps/examples/mtdpart: Extended the test. The original test - coverage was superficial (2013-5-3). - * apps/examples/smart: This is an adaptation of the NXFFS stress - test for the SMART file system (Ken Pettit, 2013-5-3). - * apps/examplex/nxtext: Remove the CONFIG_EXAMPLES_NXTEXT_NOGETRUN - option. The test logic was bad for the case where this options - is not selected. Also, complete the empty Kconfig file (2013-5-7). - * apps/NxWidgets/Kconfig: Updated to match NxWidgets/Kconfig by - Ken Pettit (2013-5-11). - * apps/examples/helloxx: C++ name mangling was occurring when this - example is built as an NSH built-in application. (2013-5-16). - * apps/netutils/discover: Added a runtime configuration for the - UDP discover utility. From Max Holtzberg (2013-5-21). - * apps/examples/tcpecho: Added a simple single threaded, poll based - TCP echo server based on W. Richard Stevens UNIX Network Programming - Book. Contributed by Max Holtzberg (2013-5-22). - * apps/examples/slcd: Add an example for testing alphanumeric, - segment LCDs (2013-5-24). - * apps/examples/slcd: Extend SLCD test to handle multi-line displays - (2013-5-26). - * apps/examples/slcd: This test now sets the SLCD brightness level to - the mid-point as part of its initialization (2013-5-27). - * .gitignore: Clean-up of most all .gitignore files: Make scope of - ignore to be only the current directory; Ignore .dSYM files in - directories where .exe's may be build. Also, in Makefiles, - clean .dSYM files in directories where .exe may be built (2013-5-30). - * apps/examples/nrf35l01_term: Add an example application to demo the - nRF24L01 driver. From Laurent Latil (2013-6-1). - * apps/nshlib/Kconfig: Add some missing NSH configuration values. - From Lorenz Meier (2013-6-2). - * Standardize on CONFIG_NSH_BUILTIN_APPS. Remove all other variants - of the build-as-an-NSH-application configuration settings - (2013-6-12). - -6.29 2013-07-31 Gregory Nutt - - * apps/examples/nsh, cxxtest, and helloxx: C++ initializers should be - set once and, preferably, in the context of the task that uses any C++ - statically initialized classes. These only becomes an issue if cxxtest - or helloxx are built as NSH builtin applications. Then you want the - initialization done in cxxtext or helloxx and not in NSH (and certainly - not twice). Added configuration options to control who does the C++ - initialization. NSH now does not do C++ initialization be default and - must be configured to do otherwise. Converely, cxxtest and helloxx - will do C++ initialization unless configured do otherwise (2013-6-21). - * apps/examples/cxxtext: Add ostream test as provided by Michael - (2013-6-21). - * apps/examples/nxhello: Minor fix for compilation error when the - display resolution is low (< 8bpp) due to a typo that has been there - for a long time (2013-6-23). - * apps/examplex/nxhello: Correct default colors when in Y1 code mode. - (2013-6-24). - * apps/system/Make.defs and Kconfig: The RAM test was not correctly built - into the configuration and build system (2013-6-26). - * apps/examples/composite/composite_main.c: SourceForge But Ticket #19. - Change to prevent some false alarm debug assertions (From Chia Cheng - Tao, 2013-7-9). - * apps/system/zmodem: Add configuration support and a build framework - for the Zmodem sz and rz command (which exist but have not yet been - checked in) (2013-7-12). - * apps/system/zmodem: The 'sz' command is now complete and seems - functional (given on light testing). The rz command logic exists but - is still untested and not yet checked in (2013-7-13). - * apps/system/zmodem: The 'rz' command is now complete and functional - under certain conditaions. There are, however, some data overrun - issues that I am still uncertain how should be handled (2012-7-15). - * apps/system/zmodem/Makefile.host and host/: The Zmodem utilities - can now be built to execute on a Linux host. - * apps/nshlib/nsh_fscmds.c: Add a 'cmp' command that can be used to - compare two files for equivalence. Returns an indication if the files - differ. Contributed by Andrew Tridgell (via Lorenz Meier) (2013-7-18). - -6.30 2013-09-14 Gregory Nutt - - * apps/examples/composite/: SourceForge bug #19: Fix a typo that can - cause a configuration error. From CCTSAO (2013-9-4). - * apps/examples/cc3000. Initial support for the TI CC3000 network module - on the Freescale Freedom-KL25Z board from Alan Carvalho de Assis. - Includes the test to verify the CC3000 (2013-9-3). - * apps/examples/usbmsc: apps/examples/usbstorage renamed usbmsc. - Change submitted by CCTSAO (2013-6-5). - * apps/examples/pwm: Clean-up some configuration confusion (2013-9-5). - * apps/netutils/dhcpd/dhcpd.c: Fix calculation of the next lease - address. SourceForge bug #21 from Paolo Messina (2013-9-6). - * apps/examples/usbmsc: Don't try to control USB trace if we are - an NSH built-in task. In that case our attempts are inadequate - and only interfere with with other logic that is attempting to - to do the same thing (in NSH or in the USB monitor) (2013-9-6). - * apps/examples/usbmsc: IMPORTANT bug fix: Change how the msconn - works. Because of recent changes the msconn command was hanging. - This was because the USB MSC start-up logic creates a pthread; - Now waitpid() will wait until all members of the task group - exit. So NSH was hanging in waitpid when msconn started even - though msconn returned. The USB MSC logic really should not use - a pthread, but we are stuck with that for now. The work-around - is that msconn now daemonizes itself so that it so that the pthread - is created in a different task group (2013-9-7). - * apps/system/usbmonitor: The USB monitor has been extended so - that it can be used with USB device or host trace data (2013-9-9). - * apps/nshlib/nsh_fscmds.c: Fix NSH listing output for the case - of a single file. Provided by Lorenz Meier (2013-9-13). - -6.31 2013-10-28 Gregory Nutt - - * apps/nshlib/nsh_netcmds.c: Remove a warning when DHCP is not - enabled (2013-9-17). - * apps/nshlib/Kconfig: Default IP address should be 0x0a000001 - (10.0.0.1), not 0xa0000001 (160.0.0.1). Ditto for the gateway - (2013-9017). - * apps/examples/ostest/Kconfig: Add configuration options for - the FPU test. There are still many OS test configuration - options that do not appear in Kconfig (2013-9-18). - * apps/examples/cc3000: Condition the CC3000 example on having - selected the CC3000 device. Otherwise, you are prompted for - this option on each 'make oldconfig' (2013-9-18). - * apps/system/usbmonitor/usbmonitor.c: Fix some bad conditional - compilation probably introduced on 2013-9-9 (2013-9-23). - * apps/system/stackmonitor: Add a daemon that can be used to - monitor stack usage by all threads (2013-9-24). - * system/usbmsc: Move examples/usbmsc to system/usbmsc (2013-9-25). - * system/cdcacm: Move examples/cdcacm to system/cdcacm (2013-9-25). - * system/composite: Move examples/composite to system/composite - (2013-9-25). - * apps/nshlib and apps/readline: Numerous changes to get NSH - working with no file system. Basically this suppresses I/O - redirection and replaces file I/O with calls to low-level - console read/write functions. Suggested by Alan Carvalho de Assis - in a somewhat different form. (2013-9-30). - * apps/nshlib/nsm_routecmds.c: Add addroute and delroute - commands (2013-10-5). - * apps/system/i2ctool/Kconfig: Fix default I2C frequency: 400KHz - instead of 4MHz. Suggested by Max Kriegleder (2013-10-10). - * apps/system/info/Kconfig and Makefile: Increase stack size. - Ken Pettit reports that this simple command can exceed its 768 - stack size under certain conditions. The size is marginal and - has been increased to 1024 by default but is also now configurable - (2013-10-14). - * apps/Makefile: Need to include external/Make.defs if we want - allow external applications to participate in the NuttX - configuration. Suggested by gdi@embedders.org (2013-10-14). - * apps/examples/cc3300: Updates as part of larger re-organizaion - of CC3000 logic by David Sidrane (2013-10-16). - * apps/examples/random: Add a simple test that dumps values from - /dev/random (2013-10-20). - * apps/examples/cc3000: Extensions and enhancements from David - Sidrane (2013-10-23). - * apps/netutils/telnetd/telnetd_driver.c: Missing argument to - debug statement can cause crashes in certain error conditions. - From David Sidrane (2013-10-24). - * apps/examples/cc3000: Updates from David Sidrane. Plus - some kruft removal (2013-10-24). - * apps/examples/can/can_main.c: Correct an error in a debug - statement. From Martin Lederhilger (2013-10-24). - * apps/examples/adc: Add support so that a ADC driven by - software triggering can be tested (2013-10-25). - * apps/examples/cc3000: Updates from David Sidrane (2013-10-25). - * apps/system/nxplayer: Implements a command line media - player. From Ken Pettit (2013-10-27). - * apps/system/nxplayer: Add logic to verify the audio sub-format. - From Ken Pettit (2013-10-28). - -6.32 2013-12-07 Gregory Nutt - - * apps/platform: A new home for board-specific application code - (2013-10-30). - * apps/include/platform/configdata.h: Define an interface that can be - used to manage platform-specific storage of configuration data - (2013-10-30). - * apps/examples/cc3000: Fine tuning of memory usage from David Sidrane - (2013-10-30). - * apps/platform/mikroe-stm32f4: Now supports storage of configuration - data. From Ken Pettit (2013-10-30). - * apps/nshlib/nsh_dbgcmds.c and others: Add skip= and count= - options to the hexdump command. From Ken Pettit (2013-11-1). - * apps/platform/mikroe-stm32f4: Now uses /dev/config for configuration - data storage. From Ken Pettit (2013-11-1). - * apps/platform/Makefile: Was not dealing with the bin sub-directory - correctly (2013-11-2). - * apps/examples/configdata: A unit test for the MTD configuration - data driver from Ken Pettit (2013-11-4). - * apps/platform/mikroe-stm32f4: Updated to use new MTD configuration - driver features. From Ken Pettit (2013-11-1). - * apps/nshlib/nsh.h: Allow USB trace without a USB console. From - David Sidrane (2013-11-06). - * apps/system/composite/composite_main.c: The wrong handle was getting - nullified. From David Sidrane (2013-11-7). - * apps/system/nxplayer: Play thread stack size is now configurable. All - NxPlayer threads now have names assigned via pthread_setname_np(). - From Ken Pettit (2013-11-10). - * apps/examples/i2schar: The beginning of an I2S test based on the I2S - character driver (2013-11-10). - * apps/nshlib/nsh_mntcmds.c: Mount command updates from Ken Pettit - (2013-11-17). - * apps/examples/hidkbd/hidkbd_main.c: Now calls a function named - arch_usbhost_initialize() that must be provided by the platform- - specific code (2013-11-29). - * apps/nshlib/nsh_fscmds.c: Add an option to the mkfatfs command to - specify FAT12, FAT16, or FAT32 (2013-12-5). - -6.33 2014-01-30 Gregory Nutt - - * apps/nshlib/nsh_mntcmds.c: Modified the df -h logic to eliminate - truncating numbers in conversion (like 7900 -> 7M). From Ken - Pettit (2013-12-12). - * Moved configs/stm3240g-eval/src/up_cxxinitialize.c to - apps/platform/stm3240g-eval/up_cxxinitialize.c: Now it is available - in user-space in the kernel mode build (2013-12-29). - * apps/examples/mount/Kconfig: Fill in empty Kconfig file (2013-12-31). - * builtin/Makefile: Fixes for native Windows build from Max Holtzberg - (2014-1-4). - * apps/netutils/dhcpc/Kconfig, resolv/Kconfig, telnetd/Kconfig, and - apps/nshlib/Kconfig: Refactor some configuration dependencies: NSH - features should depend on netutil selections; netutil selections - should depend on networking selections. (2014-1-9). - * apps/nshlib/nsh_command.c: Separate NSH command handling from NSH - line parsing. This re-partitioning simplifies the logic and will - enable some things to come (2014-1-10). - * apps/nshlib/nsh_parse.c: Will now support multiple commands on a - command line, each separated with a semi-colon (2014-1-10). - * apps/nshlib/nsh_parse.c: Put the logic that executes a command - after parsing parameters into a separate file so that it can be - reused (2014-1-10). - * apps/nshlib/nsh_parse.c: Add initial support of commands enclosed - in back quotes as command arguments. Functionality still incomplete - on initial commit (2014-1-10). - * Logic to support commands enclosed in back quotes is functional - but not thoroughly tested (2014-1-11). - * apps/nshlib/nsh_parse.c: Can now handle arguments that are - concatenations of constant strings, command return data, application - return data, and environment variables (2014-1-11). - * apps/nshlib/nsh_parse.c: Fix a memory leak ... forgot to close - a temporary file (2013-1-12). - * apps/system/inifile: A simple INI file parser (perhaps too simple). - This is code that I wrote a long time ago and have used many time but - is untested in its current incarnation (2014-1-15). - * aps/nshlib/nsh_parse.c: Recent changes broke redirection of output - (2014-1-14). - * apps/nshlib/nsh_parse.c: Add true and false commands (2014-1-17) - * apps/nshlib/nsh.h and nsh_parse.c: Re-name and re-organize some - if-then-else related structures to better support forthcoming until - and while loops (2014-1-17). - * apps/nshlib/nsh_script.c: Now saves the FILE stream for the script - file in the vtbl structure so that it can be accessed by forthcoming - while and until logic (2014-1-17). - * apps/nshlib/nsh.h, nsh_command.c, nsh_parse.c, and nsh_script.c: Add - support for while-do-done and until-do-done loops. These only work - when executing a script file because they depend on the ability to seek - in the file to implement the looping behaviors (2014-1-17). - * apps/nshlib/nsh_parse.c: Loosen up if-then-else-fi syntax to allow - a command to be on the same line as the then and else tokens like: - "if true; then echo true; else echo false; fi". Much more like bash! - (2014-1-17). - * apps/nshlib/Kconfig, README.txt, nsh.h, nsh_command.c, and - nsh_script.c: Add an option to conditionally compile out support for - loop and for if-then-else-fi sequence (2014-1-17). - * apps/nshlib/nsh.h, nsh_command.c, and nsh_parse.c: Add a break - command that can be executed with a loop to terminate the loop - immediately (2014-1-17). - * apps/system/vi: Add support for a tiny, VI work-alike editor. This - is still very much a work-in-progress on initial check-in (2014-1-20). - * apps/netutils/uiplib: Support new definitions and state passing for - network device status. From Maz Holtzberg (2014-1-21). - * apps/system/vi: Tiny VI is basically functional. All commands seem - to work. There are still some display artifacts and probably several - untested conditions (2014-1-21). - -7.1 2014-03-15 Gregory Nutt - - * apps/system/cle: Add a EMACS-like command line editor. This CLE, - is really more like readline than the NuttX readline is! (2014-02-02). - * apps/nshlib: Use of the standard tiny readline (about .25KB) is now - an option and can be replaces with the EMACX-like CLE (about 2KB) - (2014-02-02). - * Several changes to restore Windows native build (2014-2-7) - * apps/examples/touchscreen: Can now be configured to work with a mouse - interface as well (2014-2-10). - * Several files changes based on complaints from the tool CppCheck. Some - latent bugs were fixed (and most likely some new typos were introduced) - (2014-2-10). - * apps/examples/nximage/Kconfig and apps/examples/uip/Kconfig: Incomplete - Kconfig files fleshed out by Alan Carvalho de Assis (2014-2-18). - * apps/nshlib: 'rmdir' can now be used in the pseudo-filesystem. Hence, - the command needs to be available even if there are no write-able - filesystem enabled (2014-2-19). - * apps/nshlib: 'mkdir' can now be used in the pseudo-filesystem. Hence, - the command needs to be available even if there are no write-able - filesystem enabled (2014-2-19). - * apps/nshlib: 'mv' can now be used in the pseudo-filesystem. Hence, - the 'mv' command needs to be available even if there are no write-able - filesystem enabled (2014-2-19). - * apps/nshlib: 'rm' can now be used to remove nodes from the pseudo- - filesystem. Hence, the 'rm' command needs to be available even if there - are no write-able filesystem enabled (2014-2-20). - * CONFIG_DISABLE_PSEUDOFS_OPERATIONS: This new configuration setting - basically backs out the recent changes to mv, rm, mkdir, and rmdir - (2014-2-20). - * nshlib/Kconfig: Use CONFIG_DEFAULT_SMALL in selecting default - settings (2014-2-20). - * nshlib/nsh_telnetd.c: Use strncpy vs strcpy to avoid overrunning the - username and password buffers. From Bertold Van den Bergh (2014-2-22). - * nshlib/Kconfig, nsh_proccmds.c: If the CPU load feature and the procfs - features are enabled, then show CPU load used by each thread in the - 'ps' command (2014-2-27). - * nshlib/nsh_fscmds.c: Add a newline after printing the file in the - 'cat' command. This prevents the NSH prompt from be in the same line - as the final line of the file in the case where there is no newline - at the end of the file (2014-2-27). - * netutils/dhcpd/dhcpd.c: allocipaddr() should not call ntohl(), the - returned IP address is already in host order. - * apps/netutils/dhcpd/Kconfig: Add missing DHCPD configuration - settings(2014-3-3). - * Support for the legacy configuration mechanism (using appconfig files) - is removed. Only the newer configuration using the kconfig-frontends - tools is now supported (2014-3-6). - -7.2 2014-04-29 Gregory Nutt - - * apps/nshlib/nsh_parse.c: Fix NuttShell version number display in - welcome message. version.h was not being included (2014-3-23). - * apps/examples/igmp: Fill out Kconfig file; update makefile so - that the IGMP example can be used as an NSH built-in application. - From Manuel Stühn (2014-3-24). - * apps/system/usbmsc: Back out the USBMSC daemon... it is no longer - needed with the recent fix to the USBMSC class driver (2014-3-25). - * apps/examples/lcdrw: Fill out empty Kconfig file (2014-2-27). - * apps/netutils/dhcpd/dhcpd.c: The correct value of the PAD option - is zero, not one. From Brennan Ashton (2014-3-31). - * apps/sysinfo: CONFIG_VERSION_BUILD is a string an needs to be - printed with %s, not %d. Noted by Librae (2014-4-8). - * apps/netutils/ntpclient/ and apps/include/netufils/ntpclient.h: Add - a very primitive NTP client. The initial check-in is untested and - probably incomplete (2014-4-10). - * apps/netutils/resolv: Long needed major clean up for coding style - and unification of naming conventions (resolv vs dns) (2014-4-11). - * apps/netutils/dnsclient and include/netutils/dnsclient.h: File name - changes that are part of the overal resolv->dns renaming (2014-4-11). - * apps/netutils/dnsclient: Break the one big monolithic file into - three smaller files (2014-4-11). - * apps/netutils/ntpclient/ntpclient.c: Corrections to the NTP client - from Manuel Stuehn (2014-4-12). - * apps/examples/touchscreen: Add a configuration option to indicate if - architecture-specific initialized is required, yes or no (2014-4-14). - * apps/system/nxplayer/nxplayer.c: Compilation failure in one - configuration reported by Manuel Stuhn (2014-4-21). - * apps/system/sdcard: Remove an STM32 dependency. From Bob Doiron - (2014-4-21). - * apps/nshlib: malloc/free IOBUFFER for 'cat' and 'hexdump' commands - instead of using the stack. From Bob Doiron (2014-4-21). - * apps/examples/cpuhog, serialblaster, and serialrx: Stress test - examples added by Bob Doiron (2014-4-22). - * apps/examples/telnetd: Naming is confused. In someplaces 'telnetd', - and in others 'shell.' All changes to telnetd. Noted by Pelle - Windestam (2014-4-38). - -7.3 2014-06-25 Gregory Nutt - - * apps/examples/serialblaster: Update configuration an make logic in - order to select that the serial blaster task priority and stack size. - From Bob Doiron (2014-4-30). - * apps/nshlib/Kconfig and other NSH files: The alternate console device - CONFIG_NSH_CONDEV must not be defined unconditionally. This causes errors - when using Telnet sessions. This was solved by adding CONFIG_NSH_ALTCONDEV: - CONFIG_NSH_ALTCONDEV enables or disables the feature then, if enabled, - CONFIG_NSH_CONDEV provides the alternative console device name (2014-5-5). - * apps/system/i2c/i2c_get.c: Fix to show the updated register address on - each fetch (vs. showing the same starting address each time). From - Ryan VanSickle (2014-5-8). - * apps/interpreters/prun and apps/include/interpreters/prun.h: Broke out - the P-code execution logic from apps/examples/pashello and moved it to - these directory where it can be used more generally (2014-5-9). - * apps/system/prun and apps/include/interpreters/pexec_main.c: Move the - P-Code execution logic from apps/interpreters/prun to - apps/system/prun; Add pexec_main.c which is an NSH built-in - application that can be used to run P-Code programs from the NSH - command line (2014-5-9). - * Several files: Convert all old-style variadic macros to the C99 form. - Recent GCC changes tightens up that behavior and can cause some problems - (at least for the IAR compiler for some reason). See - https://gcc.gnu.org/onlinedocs/cpp/Variadic-Macros.html#Variadic-Macros. - Noted by Bob Grimes (2014-5-22). - * apps/system/cle: CLE was not returning the terminating newline character. - But reported by Max kriegleder; work-around reported by Lorenz Meier - (2015-5-23). - * Misc changes due to moving nuttx/net/uip/uip-arp.h to nuttx/net/arp.h - (2015-5-30). - * apps/examples/netpkt/: A "raw" socket test from Lazlo Sitzer - (2014-6-12). - * apps/system/hex2bin/: A library and built-in task to convert from - Intel HEX to binary format. Untested on initial commit (2014-6-15). - * apps/system/hex2bin/: Appears to be functional but testing is still - light (2014-6-16). - * apps/system/hex2bin/hex2mem_main: Add a variant application that will - write Intel HEX files directly to memory (2014-6-16). - * netutils/webserver: httpd_fs_open() should return OK on success and - ERROR on failure, not 1 and 0 (2014-6-23) - -7.4 2014-08-15 Gregory Nutt - - * apps/system/mdio: PHY tool from Daniel Lazlo Sizter (2014-6-27). - * apps/nshlib: Networking logic modified to handler the case of SLIP - transport. From Max Neklyudov (2014-6-27). - * apps/nshlib: if # appears on line, need to comment ignore additional - commands on the line (2014-7-1). - * apps/netlib: Renamed all occurrences of uiplib to netlib. Renamed - files under netutils/uiplib/uip_*.c to netutils/netlib/netlib_*.c. - Renamed all functions defined in netutils/netlib/ to begin with netlib_, - instead of uip_. (2014-7-2). - * apps/nshlib/nsh_usbkeyboard.c: Add a configuration to use a USB - keyboard for the stdin device (2014-7-3). - * apps/neturils/webclient/webclient.c: Fix to offset calculation from - Rony Xln. Prevents 0x0a at the beginning of lines (2014-7-7). - * netutils/webserver (and other files): Fix some configuration usage: - CONFIG_NETUTILS_HTTPD_SENDFILE was missing from Kconfig; CONFIG_NET_HAVE_SOLINGER - should be CONFIG_NET_SOLINGER; Type of CONFIG_NET_HTTPD_MAXPATH was wrong - in Kconfig file. From Max (2014-7-11). - * apps/system/nxplayer/nxplayer.c: Check for file read errors and end-of-file - with zero bytes read (2014-7-23). - * apps/system/nxplayer: Misc changes to better integrate with - NxWM::CMediaPlayer (2014-7-23). - * apps/system/nxplayer/nxplayer.c and apps/include/nxplayer.h: Add hooks - for fast-forward and rewind needed by CMediaPlayer; add hooks for - equalizer settings needed by the WM8904 (2014-7-24). - * apps/include/nxplayer.h and apps/system/nxplayer/nxplayer.c: Changes to - integrate with Ken's NxWM::CMediaPlayer (2014-7-24). - * apps/include/nxplayer.h: Move subsampling rate definitions from nxplayer.h - to audio.h *2014-7-27). - * apps/system/nxplayer/nxplayer.c: NxPlayer needs to set curbyte field to - zero before enqueuing a buffer. Otherwise, it looks like beginning of - the buffer has already been consumed. (2014-7-27). - * apps/netutils/webserver/httpd.c: Missing logic to close sockets on loop - termination. From Max (2014-7-28). - * apps/system/nxplayer/nxplayer.c: Fix some error handling, update - comments, more debug output (2014-7-31). - * apps/system/nxplayer/nxplayer.c: Change how the end of the audio - stream is detected by the leaf audio component. This used by be done - by looking for the first partial buffer. That does not work with the - in-place sub-sampling performed by the PCM decoder: That always reduces - the size of the buffer so that all buffers only partially filled by the - time they get to the leaf. Now, a flag is set in the audio buffer - flags set to indicate the final buffer in the stream (2014-7-31). - * apps/system/nxplayer/nxplayer.c: Fix an error I introduced: Need to - pass through final buffer even if is it zero length because it contains - the end of audio stream flag (2014-8-1). - * apps/system/nxplayer/nxplayer.c: Break reading and enqueueing of audio - buffers into two steps so that errors in enqueueing can be - distinguished from errors in reading. Errors in enqueueing signal a - downstream decoder error. Add logic to gracefully recover from - downstream decoder errors (2014-8-5). - * apps/nshlib/Kconfig, nsh.h, and nsh_netinit.c: Software assigned MAC - address is now configurable. From Lazlo (2014-8-6). - * apps/nshlib/Kconfig, nsh.h, and nsh_netinit.c: Also add an option to - let platform-specific logic select the MAC address (2014-8-5). - * apps/nshlib/Kconfig, nsh.h, and nsh_netinit.c: There is now a - configuration option that will bring up the network on an separate - thread. Since the network bring-up is asynchronous, there are not - serial console start-up delays due to the network negotiation time - (2014-8-6). - * apps/system/sudoku: Add a sudoku game (2014-8-11). - -7.5 2014-09-28 Gregory Nutt - - * apps/nshlib/Kconfig, nsh.h, and nsh_netinit.c: Extend the NSH network - initialization logic. There is now an option that will create a - network monitor thread that will monitor the state of the link. When - the link goes down, the code will attempt to gracefully put the - Ethernet driver in a down state; When the link comes back, the code - will attempt to bring the network back up (2014-8-17). - * apps/system/free/free.c and install/install.c: STM32 FLASH fixes: - use size_t instead of uint16_t, make interface more generic. From - Freddie Chopin (2014-8-28). - * apps/examples/elf: The ELF test/example has been extended so the - individual ELF test programs can link against the SYSCALL library - (if it is available) or against the C library to eliminate or - minimize the need for symbol tables (2014-8-29). - * apps/nshlib/nsh_proccmds.c: Fix NSH PS command: If there are no - arguments, it would print garbage for argument list (2014-9-1). - * apps/import/, apps/tools/, apps/Makefile: Beginning of logic that - will, hopefully, allow me to build applications against a NuttX export - package (vs. the nuttx/ source tree) (2014-9-4). - * apps/tools/mkimport.sh and apps/import/Makefile: Add .config file to - export package (2014-9-5). - * apps/Makefile: Add a 'make import' target. More is needed before - it will be usable (2014-9-5). - * apps/import/Make.defs and .gitignore: Added mostly empty Make.defs - file. Something like this will be bee needed for the 'make import' - build (2014-9-5). - * apps/Makefile, examples/elf/Kconfig, and import/Make.defs: Copy more - logic from nuttx/tools/Config.mk into the Make.defs file (2014-9-5). - * apps/import/Make.defs: Also need to define CFLAGS (2015-9-5) - * apps/import/scripts/gnu-elf.ld: Add GCC linker script for ELF - import builds (2014-9-5). - * All Makefiles: Add an install target to all makefiles. For the - import build, the top-level Makefile now does two passes: (1) builds - libapp.a, then (2) installs the programs (not yet finished) (2014-9-6). - * Many files: With kernel build (CONFIG_BUILD_KERNEL), entry point to - all tasks is main, not some xyz_main (2014-9-6). - * Many Makefiles: Add program installation for CONFIG_BUILD_KERNEL in - all Makefiles that build a main() (2014-9-6). - * Many Makefiles. For kernel build, the object file containing main - cannot go into library because of name collisions. The object file - must be handled as a special case in every Makefile (2014-9-7). - * apps/import/Make.defs: libapps.a needs to be added to the list of - libraries to link against (2014-9-7). - * apps/nshlib/nsh.h and nsh_ddcmd.c: Several commands must be disabled - in the kernel build because they depend on interfaces that are not - available outside of the kernel: dd, df, losetup, mkfatfs, mkdr, and - ps (2014-9-7). - * apps/import/Make.defs: ELF build requires -fno-common in CFLAGS - (2014-9-8). - * apps/tools/mkromfsimg.sh: Add a script to create a BOOT ROMFS - filesystem image (2014-9-9). - * Many makefiles: All makefiles that have separated the MAINOBJ - need to include MAINOBJ in list of C objects to be compiled. - SourceForge tick #31 from Aton (2014-9-11). - * apps/examples/elf/tests/Makefile and nxflat/tests/Makefile: Do - not build test cases that use task_create if there is an address - environment (2014-9-14). - * apps/examples/null/null_main.c: Need to include config.h it order know - if this is or is not a kernel build (2014-9-16). - * Change all occurrences of NxConsole to NxTerm (2014-9-20). - * apps/examples/Konfig, Makefile, README.txt and all of mdrwb/: Add an - example to test MTD R/W buffering (2014-9-25). - * apps/examples/ostest: Add a trivial test of sem_timedwait (2014-9-16). - -7.6 2014-11-26 Gregory Nutt - - * apps/examples/ostest: Add a simple test of named semaphores - (2014-9-23). - * apps/netutils/webclient/Kconfig and webclient.c: Add implementation of - timeouts for the apps/netutils/webclient. From Brennan Ashton - * apps/nshlib/Kconfig and nsh_romfsetc.c: Add support for a custom NSH - ROMFS startup image header file location. From Martin Lederhilger - (2014-9-30). - * apps/nshlib/nsh_fscmds.c: Fix ls -l output for regular files (14-9-30). - * apps/nshlib/nsh_ddcmd.c: Fix reversed in/out file closing when an - error occurs. From Ken Pettit (2014-10-2). - * apps/examples/ostest/aio.c, Kconfig, Makefile, and ostest_main.c: Add - AIO test case in OS test (2014-10-5). - * apps/examples and system: Remove non-portable uses of syslog - (014-10-8). - * apps/: Correct everything under apps to use the corrected syslog - interfaces (2014-10-8). - * apps/netutils/netlib/netlib_gethostaddr.c: Fix memcpy of host address - in netlib_gethostaddr(). From Brennan Ashton (2014-10-17). - * apps/system/stackmonitor.c and stackmonitor/Makefile: Fix compile - problems introduced when the syslog() prototype changed; Also update - Makefile for kernel build From Radoslaw Adamczyk (2014-10-23). - * apps/examples/nxterm/Makefile: Update makefile for kernel-build - issues. From Radoslaw Adamczyk (2014-10-23). - * apps/examples/keypadtest/keypadtest_main.c: Fixes to keypadtest from - Pierre-Noel Bouteville (2014-10-23). - * apps/nshlib/nsh_parse.c, nsh.h, and Kconfig: Move CONFIG_NSH_TMPDIR - to CONFIG_LIBC_TMPDIR (2014-11-05). - * apps/interpreter/bas: Merged in the Michael Haardt's BAS 2.4 adapted - for use by NuttX by Alan Carvalho de Assis. The bas24 branch was merged - into the master branch on this date (2014-11-7). - * apps/examples/bastest: This is a special version of Michael - Haardt's BAS 2.4 test files adapted for use by NuttX on a ROMFS file - system (2014-11-7). - * apps/interpreter/bas: Add VT100 support for color command (2014-11-10). - * nshlib/: Remove use of CONFIG_MAX_TASKS in ps command and in range - checkout (2014-11-13). - * netutils/thttpd: Remove use of CONFIG_MAX_TASKS in in 'task' CGI - example (2014-11-13). - * sysm/i2c: Remove use of CONFIG_MAX_TASKS for maximum argument I2C - tool size (2014-11-13). - * apps/netutils/dnsclient/dns_socket.c: Right now if you make a DNS - request before the dns address it set you will get an assertion. The - state of the IP setting is not something the application should be - aware of, it should only be concerned with whether or not the name - was resolved. From Brennan Ashton (2014-11-13). - * apps/nshlib/, apps/netutils, and apps/include/netutils: Misc - changes to support multiple networks with different link layers. For - example, ETHERNET + SLIP (2014-11-15). - * apps/nshlib/nsh_usbconsole.c: Add logic to restart the console wait - if an error occurs while reading from the console.In USB console - startup, the logic must be able to open the USB serial and receive 3 - newlines. However, it the USB driver is disconnected or otherwise - fails before the 3 newlines are received, the receive loop becomes a - killer, infinite loop, CPU hog. Noted by spasbyspas (2014-11-16). - * examples/, netutils/, nshlib/, various files: Rename - CONFIG_NET_BUFSIZE to CONFIG_NET_ETH_MTU; Add CONFIG_NET_SLIP_MTU. - Modify logic to handle different MTUs when both Ethernet and SLIP - are enabled (2014-11-16). - * apps/examples/discover, tcpecho, webserver, xmlrpc: These examples - all set the IP address of eth1 but the netmask and gateway of eth0 - if DHCP is enabled. That can't be right???? (2014-11-17). - * apps/examples/bridge: Add a simple UDP relay bridge for testing - configurations with multiple networks. Initial checkin is not - very usable because it lacks a host-side test driver for the - bridge (2014-11-17). - * apps/netutils/codecs/md5.c: Fix md5 hashing when digest[$i] lower - that 16. From Sergey (2015-11-20). - * apps/examples/bridge/host_main.c, host_net1.c, host_net2.c, Kconfig, - and Makefile: Add host-side test driver (2014-11-21). - -7.7 2015-01-26 Gregory Nutt - - * apps/examples/romfs/Makefile: fix romfs example builtin app registry - issue. From Librae (2014-11-27). - * apps/examples/djoystick and support files: Add a test of the discrete - joystick driver (2014-11-28). - * apps/examples/ajoystick and support files: Add a test of the analog - joystick driver (2014-12-03). - * apps/nshlib/nsh_netcmds.c: NSH TFTP get command: Wrong file namei - used for the destination. From Lazlo (2014-12-10). - * apps/system/cu: Add a minimalist implementation of the 'cu' terminal - program (part of Taylor UUCP for ages). Using it, you can simply open - a serial port and interact with it. Using '~.' you can leave the - terminal program and drop back to nsh. This might come in handy for - people that have e.g. GSM modems, GPS receivers or other devices with - text based serial communications attached to their Nuttx systems. From - Harald Welte (2014-12-13). - * apps/examples/ltdc and build-related file: Add ltdc test example. From - Marco Krahl (2014-12-19). - * apps/system/cdcacm, composite and usbmsc: Fix some strangely placed - conditional compilation. Looks like an automated update gone awry - (2014-12-28). - * apps/examples/ltdc/ltdc_main.c: Clean up documentation, some formatting - improvements. From Marco Krahl (2014-12-29). - * apps/system/lm75 and build-related files: Add a tiny application to - read the temperature from an LM-75 (or compatible) temperature sensor - (2015-01-06). - * apps/interpreters/micropython: A port of Micro Python to NuttX. - Contributed by Dave Marples (2015-01-11). - * apps/examples/timer: Add a trivial test of the timer driver - (2015-01-13). - * apps/netutils/dnsclient: Can select to be either IPv4 or IPv6, but - not both (IPv6 still does not compile) (2015-01-18). - * apps/netutils/netlib: Add new library functions to manipulate IPv6 - addresses (2015-01-13). - * apps/nshlib/Kconfig and nsh_netinit.c: Add logic to initialize - IPv6 addresses (2015-01-19). - * apps/netutils/netlib: All IOCTLs must use a valid address family -- - even if the address family does not matter such as when getting the - MAC address or the network flags (2015-01-19). - * apps/examples/nettest: Update test so that it can be used to test - IPv6 TCP sockets (2015-01-20). - * Many files: Correct name of fields in struct sockaddr_in6: sin6_port - and sin6_family, not sin_port and sin_family (2015-01-20). - * apps/netutils/telnetd: Add protection when CONFIG_SCHED_HAVE_PARENT - is enabled: Call sigaction with SA_NOCLDWAIT so that exit status is - not retained (no zombies) and block receipt of SIGCHLD so that accept - is not awakened by a signal. If accept() is awakened by a signal, do - not do anything crazy like exit. Most from Rony Xln (2015-01-22). - * apps/examples/udp: The UDP test example has been extend to support - IPv6 domain sockets (2015-01-22). - * apps/nshlib: Add the ping6 command to support checking IPv6 networks. - (2015-01-23). - * apps/nsh: Clean up network status presentation for IPv6 (2015-01-24). - -7.8 2015-02-11 Gregory Nutt - - * apps/interpreters/micropython: Add math library defines for nan(), - copysign(), and trunc() functions. From Brennan Ashton (2015-01-26). - * apps/examples/ustream: Add a simple test of Unix domain sockets - (2015-01-27). - * apps/examples/udgram: Add a simple test of Unix domain datagram - sockets (2015-01-28) - * apps/Makefile and builtin/Makefile: Fix for building with parallel - make. Build-server sometimes failed 'make -j24' with errors in the - builtin line or or sometimes silently succeeds but generated builds - that contain a random subset of configured NuttX applications. There - are two root causes for this: (1) Recipes for building builtin_list.h - and builtin_proto.h are not linearizable, and (2) Nothing ensures - that 'make context' is run first for apps/builtin. This change - address both issues. From Juha Niskanen (2015-02-03). - * apps/netutils/netlib: Add utilities to convert to/from prefix lengths - from/to 128-bit network masks (2015-02-06). - * apps/nshlib: Modify the NSH IPv6 ifconfig command to show the more - standard post-pended prefix value, rather than the full 128-bit netmask - (2015-02-06). - -7.9 2015-04-14 Gregory Nutt - - * apps/examples/ostest: Improved error checking for sem_timedwait() - from Juha Niskanen (2015-02-20). - * apps/netutils/Kconfig, Make.defs, and pppd/: Add a PPP daemon. From - Max Neklyudov (2015-03-11). - * Rename arch_nshinitialize() to board_app_initialize() (2015-03-30). - * apps/nshlib: NSH initialization now calls boardctl(BOARDIOC_INIT) - instead of board_app_initaliaze(). Remove support for - CONFIG_NSH_ARCHMAC. It is not used and there are better ways to do - that operation (2015-03-31). - * apps/examples/touchscreen: No longer calls arch_tcinitialize() or - arch_tcuninitialize(). Instead the new OS interface boardctl() is - called to perform these test operations on the touchscreen driver - (2015-03-31). - * apps/examples/adc: Change apps/examples/adc to that is now calls - boardctl() instead of adc_devinit() in order to initialize the ADC - device(2015-03-31). - * apps/examples/pwm/: Replace calls to pwm_devinit() in - apps/examples/pwm with calls to boardctl() (2015-03-31). - * apps/examples/: More renaming: up_lcdinitialize->board_lcd_initialize, - up_lcdgetdev->board_lcd_getdev, up_lcduninitialize->board_lcd_uninitialize - (2015-04-04). - * apps/examples/nxlines/: Add the new 'capped' parameter to nx_drawline() - calls (2015-04-05). - * apps/modbus/tcp: Fix some compile problems when TCP is enabled - (2015-04-06). - * apps/system: Clean up Kconfig menus. The way it worked before, it was - difficult to see what was enabled and what was not. menus replaced - with menuconfig (2015-04-07). - * apps/examples/ostest/sigprocmask.c: Add a simple test of sigprocmask, - sighold, and sigrelse (2015-04-09). - * apps/modbus: Includes extensions to support RTU master mode by - Armink(383016632@qq.com): - https://github.com/armink/FreeModbus_Slave-Master-RTT-STM32. Ported - to NuttX by Darcy Gong. - * apps/nshlib: Allow NSH 'date' command with no hardware RTC. Thisi - command is useful without an RTC too. Also, this permits testing on - the simulator which never has an RTC (2015-04-11). - * apps/netutils/ppp: Make pppd PAP authentication optional. From - Brennan Ashton - * apps/examples/pppd: Add PPPD test case. Split out from - apps/netutils/pppd by Brennan Ashton. - * apps/netutils/pppd: Spit up pppd utils. From Brennan Ashton. - * apps/system/zoneinfo: All logic to build timezone info. Does not do - much else yet (2015-04-14). - -7.10 2015-06-09 Gregory Nutt - - * apps/system/zoneinfo: Add logic to build a ROMFS file system - containing the timezone data (2015-04-15). - * apps/nshlib/nsh_timcmds.c: Check return values from time functions - (2015-04-15). - * apps/examples/nxlines: Fix missing right bracket that causes - compile error when CONFIG_NX_XYINPUT=y. From Librae (2015-04-16). - * apps/examples: When boardctl() fails, need to print errno not the - returned value which will always be -1 (2015-04-16). - * apps/examples: Correct use of the BOARDIOC_GRAPHICS_SETUP boardctl() - call (2015-04-16). - * apps/examples/ltdc: Add testing support for the STM32 LTDC's 2D - DMA. From Marco Krahl (2015-04-16). - * apps/nshlib/: Fix handling of gmtime_r return value in time commands. - gmtime_r returns a pointer, not an int (2015-04-21). - * apps/netutils/ntp: Fix mismatched sched_lock/unlock. Noted by - Juha Niskanen (2015-05-06). - * apps/examples: Modify/simpify apps/examples build files. From Roman - Saveljev (2015-05-06). - * apps/nshlib/nsh_netinit.c and apps/examples/ustream/: Add poll - support for Unix stream sockets. From Jussi Kivilinna (2015-05-12). - * apps/examples/ostest: Add a test of nested signals. There are no - failures to handle signals but neither am I getting any nested - signal handling (2015-05-12). - * apps/nshlib: Enhancements to NSH ifconfig for case of multi-link - operation, TUN device and local connections. From Max Neklyudov - (2015-05-19). - * apps/nshlib: Enhanced output to NSH ping command from Max Neklyudov - (2015-05-27). - * apps/examples/elf: Add configuration options to support building the - hello++4 example that depends upon having uClibc++ available. From - Leo aloe3132 (2015-05-29). - * apps/platform/stm32f4discovery: Move up_cxxinitialize from - nuttx/configs/stm32f4discovery/src to apps/platform/stm32f4discovery - where it belongs (2015-05-29). - * apps/examples/elf/tests/helloxx: Add hello++5 to ELF example. From - Leo Aloe3132 (2015-06-01). - * apps/netutils/thttpd/ and apps/examples/thttpd/: Add support for using - binfs/ instead of NXFLAT. NXFLAT is probably the better solution but - recently compiler changes make it unusable. binfs or ELF are fallback - binary formats. This commit adds an option to use binfs (2015-06-02). - * apps/examples/unionfs: Add a test of the union file system to - apps/examples (2015-06-05). - * apps/examples/thttpd now uses the Union File System if BINFS is - selected for CGI binaries (2015-06-06). - * apps/nshlib/: The NSH mount command now recognizes the Union file - system type when listing mounted file systems (2015-06-07). - -7.11 2015-08-13 Gregory Nutt - - * apps/netutils/thttpd: Fix compilation problems when - CONFIG_THTTPD_GENERATE_INDICES is defined (2015-06-12). - * apps/include: Clean up and review of header files for conformance to - standards (2015-06-12). - * apps/examples/ostest/: Extend the OS test to include a test of - pthread_mutex_trylock() for recursive mutexes. From Juha Niskanen - (2015-06-16). - * apps/netutils/thttpd: Missing gci-src as a dependency path when - building with BINFS enabled (2015-06-18). - * The apps/ directory has been removed from the NuttX GIT repository - and now stands alone in its own repository (2015-06-27). - * apps/examples/poll: Fix a few bit-rot compilation errors (2015-07-01). - * apps/nshlib: NSH will now support an (optional) shutdown command if - the board provides the option CONFIG_BOARDCTL_POWEROFF. The command can - also be used to reset the system if CONFIG_BOARDCTL_RESET=y. - (2015-07-04). - * apps/system/poweroff: Remove the system poweroff command. This is - replaced with the NSH shutdown command (2015-07-02). - * apps/nshlib: Add support for a uname command (2015-07-04). - * apps/system/sysinfo: Remove the system sysinfo command. This is - replaced with the NSH uname command (2015-07-04). - * apps/system/netdb: Add a command to access the network database - (2015-07-08). - * apps/netutils/dnsclient and include/netutils/dnsclient.h: Move the - DNS client logic into the NuttX C library. It is a necessary part - for the full implementation of the netdb logic and provides more - flexibility in that location (2015-07-10). - * apps/examples/ and apps/netutils: Remove calls to obsolete, non- - functional DNS interfaces (2015-07-11). - * apps/netutils and apps/nshlib: Replace calls to the non-standard - dns_gethotip with calls to standard gethostbyname (2015-07-11). - * apps/netutils/netlib and other files: Create netlib wrapper functions - around dns_getserver() and dns_setserver() to isolate application - code from changes to those interfaces (2015-07-12). - * apps/nshlib: Add an nslookup command (2015-07-13). - * apps/examples/nxlines: If CONFIG_NX_ANTIALIASING=y, then the nxlines - example now erases a line that is 2 pixels longer and 2 pixels wideri - than the line it drew. That eliminates edges effects due to applying - the anti-aliasing algorithm twice. A better solution would be to makei - anti-aliasing an option for each graphics call so you would rend the - line with anti-aliasing ON and clear it with anti-aliasing OFF. but I - don't have the wherewithal for that change today (2015-04-14)`. - * apps/nshlib and apps/examaples/thttpd: Change decoding to handle the - increased size of the scheduling policy field in the TCB (2015-07-23). - * apps/examples/ostest: Improve synchronization in round robin tests. - On very fast processors, there are race conditions that make the test - failure. Need better interlocking to assure that the threads actually - do start at the same time (2015-07-24). - * apps/examples/ostest: Add a test for the sporadic scheduler. This - test is failing as of this commit (2015-07-24). - * apps/system/readline: Add support for Unix-style tab complete to - readline. This currently works only for built-in functions. - Contributed by Nghia Ho (2015-07-28). - * apps/system/readline and apps/nshlib: Extended the tab-completion - support to also expand NSH command names (2015-07-30). - * apps/system/readline and apps/nshlib: Add support for an in-memory - command line history that can be retrieved using the up and down - arrows. Contributed by Nghia Ho (2015-08-09). - * apps/Makefile: No longer depends on hardcoded lists of directories. - Instead, it does a wildcard search to find all appropriate - directories. This means that to install a new application, you - simply have to copy the directory (or link it) into the apps/ - directory. If the new directory includes a Makefile and Make.defs - file, then it will automatically be included in the build (2015-08-11). - * apps/Makefile, Kconfig, */Kconfig, tools/mkkconfig.sh: Add the tool - mkkconfig.sh that dynamically builds the apps/Kconfig file at - configuration time. The hardcoded configuration file has been removed - and now the top-level Makefile executes tools/mkkconfig.sh to auto- - generate the top-level Kconfig file. A new apps/ make target call - preconfig: was added to support this operation. Now you do not have - to modify the top-level Kconfig file to add a new directory into the - configuration; the top-level subdirectory simply needs to include a - Kconfig file and it will automatically be included in the - configuration. The native Windows build is temporarily broken until - a new apps/tools/mkconfig.bat script is generated (2015-08-11). - * apps/tools/mkkconfig.bat: Add the Windows script corresponding to - apps/tools/mkkconfig.sh. Needed for a Windows native build. Untested - on initial commit (2015-08-12). - -7.12 2015-10-01 Gregory Nutt - - * apps/examples/can: Extend the CAN loopback test by adding more - command line options (2015-08-17). - * apps/examples/usbserial: Can now be run as an NSH builtin-function. - Now uses a configurable IO buffer size (2015-08-20). - * Various Kconfig files in netutils: Fix some changes from from - NETUTILS_DNSCLIENT to NETDB_DNSCLIENT. From Pavel Pisa (2015-08-20). - * system/netdb: Failed to build if CONFIG_NET_HOSTFILE was not defined - because gethostbyaddr() was not available. Noted by OrbitalFox - (2015-08-21). - * apps/system/symtab: Optional canned symtab inclusion to the build. When - option CONFIG_SYSTEM_SYMTAB is selected and symbol table file - libc/symtab/canned_symtab.inc is prepared then application can - use system provided complete symbol table. The option has - substantial effect on system image size. Mainly code/text. If - loading of applications at runtime is not planned do not select - this. From Pavel Pisa (2015-08-23). - * apps/examples/nettest: Add option to suppress network initialization. - This is necessary if the nettest is run from NSH which has already - initialized the network (2015-08-26). - * apps/examples/nettest: Extend test so that can be performed using the - local loopback device (2015-08-26). - * apps/nshlib: Fix error handling in 'cat' command. On a failure to - allocate memory, a file was not being closed. From Bruno Herrera - (2015-08-26). - * apps/nshlib: Fix error handling in 'mv' command. On a failure to - expand the second path, the memory allocated for the expansion of the - first path was not being freed. From Bruno Herrera (2015-08-26). - * apps/examples/netloop: Add a test of the local loopback device - (2015-09-02). - * apps/modbus and apps/include/modbus: Macros PR_BEGIN_EXTERN_C and - PR_END_EXTERN_C were not defined in all contexts. Replace with - explicit expansion in all cases. From Stefan Kolb (2015-09-03). - * apps/canutils/uavcan: Add support for libuavcan. From Paul - Alexander Patience (2015-09-25). - * apps/examples/udpblaster: Add a test to stress the network by - sending UDP packets at a very high rate. (2015-09-30). - * apps/examples/uavcan: libuavcan example from Paul Alexander - Patience (2015-10-01). - -7.13 2015-12-05 Gregory Nutt - - * apps/examples/fstest: Add a generic file system test. This is - essentially the same as examples/smart, but has all of the SmartFS - specific logic ripped out. This was created for testing the new - tmpfs (2015-10-10). - * apps/examples/zerocross: Add a Zero Cross application example. - From Alan Carvalho de Assis (2015-10-13). - * apps/examples/media: Add a simple test for access of media via - a block driver or MTD driver (2015-11-09). - * apps/nshlib/nsh_ddcmd.c: Now that NuttX automatically converts - block devices to character devices, all of the BCH stuff in NSH - can be removed (2015-11-21). - * apps/system/hexed: Port the hexed command line hexadeciamal - editor to Nuttx. See http://apps.venomdev.net/hexed/. - Initial port is not functional (2015-11-21). - * apps/fsutils/smartfs: Move into apps/fsutils from kernel, now - uses only open and ioctl. From Ken Pettit (2015-11-23). - * apps/fsutils/smartfs/ and apps/nshlib/: Add configuration option - to supported multiple root directories. From Ken Pettit (2015-11-23). - * apps/nshlib: Add support for 'basename' and 'dirname' commands - (2015-11-23). - * apps/nshlib: Like bash, NSH set command should strip off any - leading or trailing whitespace (2015-11-23). - * apps/nshlib: The mount commands now accepts mount options (currently - needed only for the hostfs file system). From Ken Pettit (2015-11-25). - * apps/nshlib: NSH no longer calls losetup() and loteardown directly. - Now it opens /dev/loop and accomplishes these things using ioctl() - calls (2015-11-25). - * apps/nshlib: If CONFIG_NETDEV_STATISTICS=y, then print the network - driver statistics in the ifconfig (15-11-26). - * apps/nshlib: The 'ifconfig' command now uses /proc/net/ to view - network device configuration and status and /proc/net/stat to show - network statistics. A consequence of this is that you cannot view - this network information if the procfs is not enabled and mounted at - /proc (2015-11-27). - * apps/nshlib: Remove all references to internal OS interface - netdev_foreach(). Logic in ifconfig, ifup, and ifown now use the - procfs file system to examine networking status. (2015-11-27). - * apps/nshlib: Add a new NSH losmart command. losmart setups up - a loop device for the smart MTD driver similar to losetup but - with different syntax. From Ken Pettit (2015-11-28). - * apps/nshlib: The I/O buffer, g_iobuffer, should not be a global - buffer. That will not work in an environment where there are multiple - NSH sessions. The I/O buffer must, instead, be a part part of the - session-specific data defined in nsh_console.h (2015-11-28). - * apps/nshlib: The 'ps' command now uses /proc// to obtain - task status information. A consequence of this is that you cannot use - the 'ps' command if the procfs is not enabled and mounted at - /proc (2015-11-28). - -7.14 2016-xx-xx Gregory Nutt - - * netutils/telnetd: Move the Telnet driver from netutils/telnetd to - nuttx/drivers/net. It is a driver an belongs in the OS. There are - still some partitioning issues with the interface to the Telnet - driver (2015-12-07). - * netutils/telnetd: No longer calls OS interface telnet_driver. Now - creates Telnet sessions by opening a new factory device at /dev/telnet - and then using ioctl calls to create the session character drivers - at /dev/telnetN (2015-12-07). - * netutils/ping: Unfinished implementation of ping/ping6 using raw - sockets (2015-12-11). - * examples/module: Add a test harness for verifying NuttX kernel - modules (2015-12-12). - * apps/nshlib: Add module commands: insmod, rmmod, and lsmod - (2015-12-13). - * apps/examples/pca9635: Add a simple test of PCA9635PW PWM LED - driver. From Alan Carvalho de Assis (2015-12-15). - * apps/examples/ostest: Add a test of POSIX timers using - SIGEV_THREAD (2015-12-30). - * apps/nshlib: Add a 'time' command that may be used to time the - execution of other commands (2015-12-31). - * apps/netutils/netlib: Add netlib_get_dripv4addr() and - netlib_get_ipv4netmask(). From Pelle Windestam (2016-01-14). - * apps/fsutils/passwd: Utility library for accessing a password - file like /etc/passwd (2016-01-19). - * apps/nshlib/nsh_passwdcmds.c: Add useradd, userdel, and passwd - commands (2016-01-20). - * apps/nshlib: Now supports a Message of the Day (MOTD) that will - be presented after the NSH greeting (2015-01-20). - * apps/nshlib: All sessions may be protected with logins using - the encrypted password in /etc/passwd (2016-01-20). - * apps/fsutils/inifile: Move system/inifile to fsutils/inifile - where it seems to fit in better (2016-01-20). - * apps/nshlib: Extend logins. Added: Optional platform-specific - function to perform password verification and optional delay - after each failed login attempt (2016-01-22). - * system/ramtron: Removed completely. It inappropriately used - an internal OS interface (up_spiinitialize), that has been - obsoleted. That's what happens when you violate interface - boundaries between the application and the OS (2016-01-27). - * apps/platform/Makefile: Use a relative path to the board - directory link rather than the absolute path. For Cygwin, the - absolute would would need converted with cygpath. But just using - the relative path is a simpler solution (2016-01-27). - -7.15 2016-03-27 Gregory Nutt - - * apps/examples/chat and apps/netutils/chat: Contributed by - Vladimir Komendantskiy (2016-01-29). - * apps/examples/ubloxmodem: app to control the power state of the - modem in nsh. From Vladimir Komendantskiy (2016-01-31). - * apps/system/ubloxmodem: Moved the modem application from - examples/ to system/ (2016-01-31). - * apps/system/i2c: The I2C tool now obeys it OS interfacing: - it now uses an I2C character driver to access the I2C bus - (2016-02-02). - * apps/netutils/netlib: Add utility functions to support accesses - to the ARP table (2016-02-08). - * apps/netutils/dhcpd: DHCPD no longer calls directly into the - OS but uses the new network IOCTL commands to modify the ARP - table (2016-02-08). - * apps/nshlib: Add an 'arp' command that will support access to - the OS ARP table (2016-02-08). - * apps/nshlib: 'ps' command will show CPU if SMP is enabled - (2016-02-19). - * apps/examples/leds: An example to demonstrate use of LED - driver (2016-02-20). - * apps/examples/smp: Add a test to verify SMP configurations - (2016-02-21). - * apps/examples/rgbled: Example using the RGB LED driver to - drive an RGB LED via PWM. From Alan Carvalho de Assis - (2016-02-23). - * apps/platform/sabre-6quad: Add a platform directory for the - Sabre 6Quad board (2016-03-01). - * apps/examples/ostest: Add a test of TLS (2016-03-11). - * apps/modbus/nuttx/portserial.c: Was not returning an error - on failure to open the device driver. From Olololshka kokoko - (2016-03-16). - * apps/examples/sched_note: Add a simple example to exercise - the scheduler instrumentation logic. Kind of buggy right now - (2016-03-17). - * apps/system/cdcacm, usbmsc, and composite, apps/examples/usbserial, - composite, usbterm: Use new boardctl() instead of calling directly - in the OS when possible. There are still a few bad OS calls for - USB device interfaces that do not yet have boardctl() commands - (2016-03-25). - -7.16 2016-06-01 Gregory Nutt - - * apps/system/sdcard: Remove the SD card application. This - application violates OS/application interface rules and has been - moved to Obsoleted/apps/system/sdcard (2016-03-29). - * apps/examples/alarm: Add a simple test of the ALARM iotcl calls - of the RTC driver (2016-04-03). - * apps/examples/nximage: No configuration option to select - greyscale. - * apps/canutils/uavcan: Update UAVCAN version. From Paul Alexander - Patience (2016-05-03) - * Several Makefiles: Add .PHONY definitions to prevent 'clean up to date' - message weirdness; Add default definitions for some commonly used - things when 'make clean' is used without .config or Make.defs files - installed (2016-05-10). - * apps/canutils/libcanard: Add libcanard UAVCAN library. From Paul - Alexander Patience (2016-05-12) - * apps/examples/watchdog: Remove call to up_wdginitialize(). This - interface should not be accessed from application code (2016-05-18). - * apps/system/sched_note: Move the schduler note monitor from examples/ - to system/ (2016-05-18). - * apps/platform/nucleo-144: Add platform files for NUCLEO-144 - (NUCLEO-F746ZG). From Mark Olsson (2016-05-19). - * apps/netutils/esp8266: ESP8266 driver application. From Pierre-noel - Bouteville (2016-05-21). - * apps/canutils/: Rename uavcan to libuavcan. From Paul Alexander - Patience (2016-05-25). - * apps/examples/media: You can now override the default device driver - path by providing an alternal path on the command line. From Sébastien - Lorquet (2016-06-01). - -7.17 2016-07-25 Gregory Nutt - - * apps/examples/alarm: ioctl call was clobbering file descriptor - (2016-06-02). - * apps/system/flash_eraseall: Removed! This logic violates the OS/ - application interface and cannot be supported. The old code can still - be found in the 'Obsoleted' repository (2016-06-03). - * apps/fsutils/flash_eraseall: IOCTL wrapper for MDCIO_BULKERASE command - (2016-06-04). - * apps/system/flash_eraseall: Restored! Using the new IOCTL wrapper at - apps/fsutils/flash_eraseall (2016-06-04). - * apps/canutils/libuavcan: Fix for recent change to STM32 timer frequency - definiitions (2016-06-05). - * Many files: Change to the way that Kconfig files are generated in order - to better support reuse of the apps/ directory in NuttX products. Changes - include: Make the full tree use wildcards make.defs, Add empty preconfig - rules to 'leaf' makefiles, Use directory.mk for recursive dir makefiles, - Individual app kconfig fixes, Recursive Kconfig autogeneration, Add - kconfig files for pcode and tiff, and fix a gitignore rule, From - Sébastien Lorquet (2016-06-06). - * apps/nshlib: Make NSH net-initialization be a configuration option. From - Marten Svanfeld (2016-06-09). - * netutils/ntpc and nshlib: NTP Client: All retries; Add initialization - in NSH network startup logic. From David S. Alessio (2016-06-09) . - * Rearrange make to eliminate Kmenu files From Sebastien Lorquet - (2016-06-09). - * apps/nshlib: Make NSH net-initialization be a configuration option. - From Marten Svanfeldt (2016-06-09). - * Make sure that APPNAME is defined in all Makefiles that generate - applications. From Sebastien Lorquet (2016-06-09). - * apps/netutils/esp8266/: Add logic to set the BAUD rate. From Pierre- - noel Bouteville (2016-06-11). - * apps/netutils/esp8266/: CONFIG_SERIAL_TERMIOS must be defined in - order to set BAUD (2016-06-11). - * Change dbg() and vdbg() to err() and info() (2016-06-11). - * Change some *err() message to *info() messages if what was a *dbg() - message does not indicate and error condition (2016-06-14). - * Add _ to front of debug macros (2016-06-16). - * SYSLOG: Remove llinfo(), *llwarn(), and llerr(). These are no longer - supported in the redesigned syslog() logic (2016-06-20). - * apps/canutils/libcanard: update version. From Paul Alexander Patience - (2016-06-22). - * apps/examples/can: Some variables were not declared in all required - cases. From Sebastien Lorquet (2016-06-23). - * apps/gpsutils/minmean: Fix minmea Makefile to find the libapp at the - apps/. From Alan Carvalho de Assis (2016-06-23). - * apps/canutils/canlib: Basic CAN utility library. From Sebastien Lorquet - (2016-06-24). - * apps/nshlib/Kconfig: Move some NSH settings out of nuttx/configs/Kconfig - to here. Why was it in the NuttX tree (2016-06-24). - * apps/platform/olimex-stm32-e407: Add platform files for Olimex STM32 - E407. From Mateusz Szafoni (2016-06-27). - * apps/system/hex2bin: Move the portable library portion of hex2bin to - nuttx/libc/hex2bin where it can be shared with the OS internals - (2016-06-27). - * apps/nshlib: 'ps' command now prints out the stack usage if stack - coloration is enabled. From Frank Benkert (2016-06-30). - * All inclusion of apps/ header files were removed from the nuttx/ - repository. This caused a lot of reshuffling of logic: binfmt pcode - support, usbmonitor is now a kernel thread, TZ/Olson database moved to - libc/zoneinfo (2016-06-29). - * apps/include directory structure reorganized. There are no longer any - header files in the apps/include/. directory. Rather, sub-directories - were added to match the partitioning of apps/ sub-directories and the - header files were moved into the appropriate sub-directory. This - change is intended to help with some changes be considered by - Sébastien Lorquet (2016-07-01). - * apps/nshlib: Allow stack usage to be disabled on constrained systems. - From David Sidrane (2016-07-01). - * apps/examples/canard: Add canard example application. From Matthias - Renner (2016-07-08). - * apps/builtins: exec_builtin was not using the provided open flags. As - a result >> redirection was not working (2016-07-10). - * apps/netutils/ntpclient: The NTP client will now optionally use - pool.ntp.org as the NTP server; and reset the retry count upon success - -- more robust. From David Alessio (2016-07-10). - * apps/nshlib/nsh_proccmds.c: Recent enhancements to cmd_ps trips a - floating point exception if LIBC_FLOATINGPOINT is not defined (at - least on Cortex M4 w/ hardfloat). I’m using a buildroot gcc - configured to support Cortex-M4F and the hard float ABI, target files - are compiles with: -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 - -mfloat-abi=hard. I’m not sure the best way to address this, but the - this change is the first that comes to mind. Note, I added the float - qualifier ‘F’ after a few constants to prevent the compiler from - promoting the multiplication and division to double (expensive on - M4F) then demoting to single float for the store. From David - Alessio (2016-07-10). - * Call all includes fronm to "bla/bla.h". From - Sebastien Lorquet (2016-07-11). - * Build System: Add apps/include to include path in top-level - Make.defs file. Remove multiple definitions of INCDIR opt - (2016-07-11). - * apps/netutils, uIP webserver: Fix a data declaration in a header file - (2016-07-11). - * apps/nshlib: In ps command, don't show stack usage if - CONFIG_STACK_COLORATION is not enabled (2016-07-13). - * apps/netutils/esp8266: In Kconfig, select ARCH_HAVE_NET when - NETUTILS_ESP8266 is selected. This allows, among other things, - support for network debug output. From Pierre-noel Bouteville - (2016-07-14). - * apps/nshlib: PS Command: When Priority Inheritance is enabled, the - format of /proc//status changes to show both the current priority - and the thread’s base priority. This messes up the format of cmd_ps. - From David Alessio (2016-07-15). - * apps/examples/pty_test: PTY test program. From Alan Carvalho de Assis - (2016-07-15). - * apps/examples/media: media example was intended to take either a - command line argument, or a compiled-in default value from config. - However, the default was ignored, leading to confusing error messages. - From ziggurat29 (2016-07-17). - -7.18 2016-10-08 Gregory Nutt - - * apps/canutils/libuavcan: Under certain circumstances, DELIM make not - be defined in Makefile (2016-07-28). - * Add the dirlinks target to some Makefiles. This plugs some holes - opened by last chicken-and-egg build fix (2016-07-28). - * apps/examples/gpio: Add a simple test of the GPIO driver (2016-08-01). - * Add definition for APPNAME in apps/canutils/canlib. From Sebastien - Lorquet (2016-08-01). - * Add DIRLINK and DIRUNLOBK tool definitions to Make.defs (2016-08-02). - * apps/exmples/gpio: Should not claim an error if we are only asked to - read an output pin (2016-08-03). - * apps/nshlib/: Fix FIFO_SIZE vs PIPE_SIZE (2016-08-04). - * apps/examples/rfid-readuid: Add RFID_READUID sample application. From - Alan Carvalho de Assis (2016-08-06). - * apps/interpreters/minibasic: Add a port of Mini Basic, version 1.0, - written by Malcom McLean and released under the Creative Commons - Attribution license (2016-08-11). - * apps/examples: Add Oneshot timer example (2016-08-12). - * apps/system/tee: Port tee command from NetBSD (2016-08-12). - * apps/examples/oneshot: If the requested delay is > max_delay, then - break the delay up into several pieces (2016-08-15). - * apps/examples/oneshot: A thought about how we might improve accuracy - of long delays (2016-08-15). - * nshlib/Kconfig: Fix hex representation of IP address. Noted by - Michal Lyszczek (2016-08-19). - * apps/gpsutils: Fix an error min minmea. From Aleksandr Vyhovanec - (2016-08-24). - * apps/nshlib/nsh_syscmds.c: missing semicolon. From Mateusz Szafoni - (2016-08-25). - * nshlib/: Add logic to support an NSH-specific system command - (2016-08-25). - * apps/system/system: Add a generic system command. Current - implementation cannot use /bin/sh and spawns the custom NSH system - command directly (2016-08-25). - * apps/examples/system: Add a simple test of the system command. Fix - the first bug discovered by the test (2016-08-25). - * apps/nshlib: Add printf command to NSH, e.g., controlling - /dev/userleds from command line: nsh> printf \x01 > /dev/userleds. - From Alan Carvalho de Assis (2016-10-01). - * apps/platform: Add support for STM32L476-MDK (2016-10-06). - * apps/nshlib: Don't try to flush output streams if stdio buffered - I/O is not supported (2016-10-06). - -7.19 2016-10-08 Gregory Nutt - - * Rename examples/buttons to examples/archbuttons. From Alan Carvalho - de Assis (2016-10-11). - * Add a new buttons example that uses the button character driver - instead of the architecture buttons directly. From Alan Carvalho de - Assis (2016-10-11). - * apps/nshlib: nsh_getdirpath(), use snprint instead of sprintf to avoid - possibility of buffer overrun. Noted by Chung Hwan Kim (2016-10-11). - * examples/cctype: Add an example to verify cctype functions - (2016-10-22). - * Add platform support for the ESP32 core v2 board (2016-10-31). - * Modbus Master is missing many files and doesn't compile at all. More - details in https://groups.yahoo.com/neo/groups/nuttx/conversations/topics/13734. - From Vytautas Lukenskas (2016-11-03). - * graphics/traveler/tcledit and libwld: Add an X11 Tcl/Tk tool that can - be used to edit Traveler world files (2016-11-12). - * platform/esp32-core: Fix some naming that prenvented building the C++ - support (2016-11-14). - * Make.defs: Using wrong link script if native window tool used with - Cygwin (2016-11-17). - * apps/examples/timer: Should detach signal handler before exiting - (2016-11-18). - * Fixed bug that didn't free ftpd resources on exit. From Pascal - Speck (2016-11-21). - * The examples/qencoder app was trying to init the encoder by a direct - call into the board, cheating in a local header to declare the - normally unavailable function prototype. From Sebastien Lorquet - (2016-11-22). - * apps/examples/archbuttons: Removed because it violates OS interface - principles (2016-11-22). - * apps/system/sched_note: Extend to include additions to instumentation - for SMP (2016-11-27). - * apps/system/sched_lock: Add support for spinlock notes (2016-12-01). - * Graphics: Remove all NX server tasks. Instead, call boardctl() to the - NX server kernel thread (2016-12-01). - * Remove RGMP example (2016-12-02). - * Remove some garbage characters added by error. From Pierre-Noel - Bouteville (2016-12-04). - * netutils/ntpclient: Fix missing left parenthesis. From Pierre-Noel - Bouteville (2016-12-04). - * Import patch to fix:cJSON_PrintUnformatted() behaves unexpected if an - empty array shall be printed to text. from Jerome Lang 2012-04-19. - From Pierre-Noel Bouteville (2016-12-04). - * esp8266 update cosmetic and many bug fix. From Pierre-Noel Bouteville - (2016-12-04). - * fix bug un ftpd file or socket may be not closed. From Pierre-Noel - Bouteville (2016-12-04). - * Remove all usage of BOARDIOC_ADCTEST_SETUP, BIOARDIOC_PWMSETUP - (2016-12-05). - * Remove BOARDIOC_CAN_INITIALIZE. CAN initialization is now done in the - board initialization logic just like every other device driver - (2016-12-06). - * Add support for new scheduler instrumentation (2016-12-07). - * examples/ostest: Extend the pthread cancellation test to exercise - pthread_cleanup_push() (and pthread_cleanup_pop() indirectly via - pthread_cancel() and pthread_exit() (2016-12-08). - * examples/ostest: Add some delays to the pthread cancellation test. - With deferred cancellation enabled, things happen more asynchronously - (2016-12-10). - * OS test: enhance pthread cancellation test some (2016-12-11). - * Remove std_readline(). This called up_getc() and up_putc() directly, - violating the POSIX OS interface (2016-12-13). - * NSH: dd command will show statistics. From Masayuki Ishikawa - (2016-12-19). - * Add platform support for the Olimex STM32 P407 (2016-12-21). - -7.20 2017-03-08 Gregory Nutt - - * OS test: Was ignoring CONFIG_EXAMPLES_OSTEST_FPUTESTDISABLE (2016-12-29). - * apps/examples/nxtext: Make line spacing configurable (2017-01-03). - * apps/graphics/traveler/tools: Fix linkage issue. The -lm should come - after -o binname. From Alan Carvalho de Assis (2017-01-07). - * apps/system/zmodem/host/nuttx/compiler.h synchronized with - nuttx/nuttx/include/nuttx/compiler.h. From Aleksandr Vyhovanec - (2017-01-09). - * examples/sotest: Add a test for shared libraries (2017-01-23). - * examples/ostest: Add new error print and modify comments in cancel - test. From Juha Niskanen (2017-01-24) - * In apps/examples/mtdpart/mtdpart_main.c where - CONFIG_EXAMPLES_MTDPART_NPARTITIONS defining is checked should be - #ifndef instead of #ifdef. Noted by Oleg Evseev (2017-01-30). - * NSH: Add support for the 'ln' command (2017-02-02). - * NSH ls command: if node is a symobolic link, use readlink() to get and - the display the target of the symbolic link (2017-02-03). - * NSH: Add readlink command (2017-02-05). - * examples/ostest: Add a test of setvbuf() (2017-02-09). - * apps/examples/stat: Add a simple test for stat(), fstat(), and - statfs() (2017-02-13). - * strcasecmp, strncasecmp, bzero, bcmp, and bcopy should be defined in - strings.h, not string.h. bzero, bcmp, and bcopy are legacy functions; - the contemporary counterparts should be used instead (2017-02-16). - * examples/stat: Add test for fstatfs() (2017-02-17). - * C files that reference ANIOC_TRIGGER now need to include - nuttx/analog/ioctl.h (2017-02-25). - * Add platform files for nucleo-f334r8. From Mateusz Szafoni (2017-02-26). - * NSH: Eliminate a warning when all memory inspection commands are - disabled (2017-02-27). - * netutils/webserver: Needs to include strings.h for strcasecmp() - (2017-02-27). - * nxplayer: Needs to include strings.h for strcasecp() (2017-02-27). - * Remove an unused variable when calling sigwaitinfo() and - sigtimedwait(). From Masayuki Ishikawa (2017-03-02). - * The CONFIG_NETUTILS_HTTPD_PATH constant is used by httpd_mmap.c and - httpd_sendfile.c but It was not present in Kconfig menu. From Maciej - Wójcik (2017-03-05). - -7.21 2017-06-05 Gregory Nutt - - * Add c++ platform/bambino-200e with C++ initialization. From Alan - Carvalho de Assis (2017-03-08). - * increase number of supported PWM channels from 4 to 6. From Andreas - Bihlmaier (2017-03-09). - * NSH library: In nsh_argexand(), if CONFIG_NSH_ARGCAT is defined but - CONFIG_NSH_CMDPARMS defined and/or CONFIG_DISABLE_ENVIRON not - defined, then there is a situation that causes an infinite loop in - the parser. Noted by Freddie Chopin (2017-03-09). - * apps/examples/hidkbd: Remove call to arch_usbhost_initialize(). - That is violation of the OS interfacing rules and will no longer be - supported. USB host should be initialized as part of the normal - board bring-up logic as with any other devices and should not involve - illegal calls from applications into the OS (2017-03-09). - * apps/examples/usbterm: Removed because it is not very useful and - because it can be configured to use an illegal call into the OS - (2017-03-09). - * netutils/netlib: Add one wireless IOCTL wrapper. For now, this is - just a test to be sure that the wireless IOCTL definitions are in - place (2017-03-13). - * netutils/nshlib: Add wrapper to get the wireless ESSID (2017-03-13). - * Adds a test program for the XBox One controller driver (xbc_test). - From Brian Webb (2017-03-18). - * built-in libc defect workaround: replace '%6.6u' format with an - equivalent '%06u'. From Tomasz Wozniak (2017-03-21). - * Clicker-STM32: Add platform directory w/ C++ support (2017-03-22). - * examples/ostest: Add a test of robust mutexes (2017-03-26). - * examples/ostest: Robust mutex test needs to call - pthread_mutexattr_setrobust() (2017-03-27). - * Rename CONFIG_MUTEX_TYPES to CONFIG_PTHREAD_MUTEX_TYPES (2017-03-27). - * examples/mm: Fix Makefile. Built-in was not being registered - (2017-03-28). - * nshlib: fix building when CONFIG_NET_USRSOCK enabled with other - link-layer. From Jussi Kivilinna (2017-03-31). - * Add examples/usrsocktest application for USRSOCK testing. From Jussi - Kivilinna (2017-04-03). - * NSH: Fix some warnings about integer/pointer casts of different sizes - (probably only effects 64-bit simulation) (2017-04-03). - * examples/nettest: Trying to adapt to use for testing 6LoWPAN - (2017-04-03). - * examples/nettest: If doing loopback, but not using the official - loopback device, then use the server should use the configured client - IP address (2017-04-04). - * Added support for set [{+|-}{e|x|xe|ex}] [ ]. Set the - 'exit on error control' and/or 'print a trace' of commands when - parsing scripts in NSH. The settinngs are in effect from the point - of execution, until they are changed again, or in the case of the init - script, the settings are returned to the default settings when it - exits. Included child scripts will run with the parents settings and - changes made in the child script will effect the parent on return. - Use 'set -e' to enable and 'set +e' to disable (ignore) the exit - condition on commands. The default is -e. Errors cause script to - exit. Use 'set -x' to enable and 'set +x' to disable (silence) - printing a trace of the script commands as they are ececuted. The - default is +x. No printing of a trace of script commands as they are - executed. From David Sidrane (2017-04-05). - * Print expanded variables if -x. From David Sidrane (2017-04-05). - * examples/udpblaster: Several fixes to work with 6LoWPAN (2017-04-06). - * examples/udpblaster: Add logic to bind the local UDP socket to a - well-known address (2017-04-06). - * 6LoWPAN: Add network IOCTL support to set the node address - (2017-04-06). - * examples/ostest: Add tests for pthread_rwlock. Adding tests to be - used to verify the pthread_rwlock lock works. From Mark Schulte - (2017-04-07). - * Remove CONFIG_PTHREAD_RWLOCK. Rwlock interfaces built - unconditionally (2017-04-07). - * examples/ostest: pthread rwlock additional tests and bugfixes. From - Mark Schulte (2017-04-07). - * netutils: Add a helper function to convert a string to a 6LoWPAN node - address (2017-04-08). - * NSH library: Extend ifconfig to support 6LoWPAN. Adapt to some - changes in configuration variable usage (2017-04-08). - * NSH set command: Eliminate useless argc check of SCRIPTS are enabled - but ENVIRONMENT is disabled (2017-04-09). - * examples/ostest: additional test for rwlock and one for cancel - cleanup handlers. From Juha Niskanen (2017-04-10). - * wireless/wapi: Quick port of Wapi wireless services. No build - support yet. This also depends on features not supported by NuttX. - This is a work in progress (2017-04-10). - * wireless/wapi: Remove logic that depends on Linux netlink. Add - (untested) build support (2017-04-10). - * wireless/wapi: Remove functionality that depends on the Linux - procfs: This includes only 1) listing of available interfaces and 2) - listing of all routes (2017-04-10). - * Beginning real design of wapi application based on Wapi sample code - (2017-04-10). - * wireless/wapi: Re-write of wapi tool UI (2017-04-11). - * examples/ostest: clarify when pthread clean-up test mutex need to - remain usable. From Juha Niskanen (2017-04-12). - * examples/hidkbd: Add some missing configuration settings (2017-04-18). - * NSH library: Fix open flags in nsh_codeccmd.c. From Masayuki - Ishikawa (2017-04-19). - * netlib and NSH: Add logic to set the IEEE802.15.4 PAN ID (2017-04-18). - * wireless/ieee802154: Starts framing out iwpan tool, similar in - concept to wapi. From Anthony Merlino (2017-04-20). - * ieee802154: Move non-radio files from libradio to libutils. Add - ieee802154_getpanid() (2017-04-21). - * wireless/ieee802154: Beginning of support for IEEE 802.15.4 MAC - library (2017-04-21). - * wireless/ieee802154/libmac: Finishes all defined MAC IOCTL helpers - (there are a few that are not defined) (2017-04-21). - * netlib: Get and/or set PAN ID of IEEE 802.15.4 radio (2017-04-21). - * wireless/ieee802154: libaudio and libmac need to return the correct - error codes (2017-04-22). - * nshlib: nsh_netcmds.c should include netlib.h even if neither TCP nor - UDP are enabled (2017-04-25). - * apps/wireless/wapi: Correct an error in dependency generation - (2017-04-25). - * examples: random: avoid stack overflows. From Juha Niskanen - (2017-04-26). - * wireless/wapi: Improve error reporting IOCTL failures (2017-04-26). - * I need to look at the registers that are at or around 0xe000ef90. - Using mw and xd, I see that nsh does not support pointers greater - than 0x7fffffff. A quick look at the source shows that the pointers - for those two commands are set with calls to strtol() rather than - strtoul(). Changing the two pointer-setting instances to strtoul() - fixes the problem, at least for my architecture/config. From Ian - McAfee (2017-04-26). - * NSH: Needs to include tftp.h if TFTP not disabled (2017-04-29). - * netutils/dhcpc: Make the network device name a configuration - option. Was hardcoded to eth0 but may, instead, need to be wlan0 - (2017-05-02). - * nshlib/nsh_netinit.c: If IEEE802.11 selected use wlan0 instead of - eth0 for network device name (2017-05-02). - * wireless/wext: Add drivers_wext from the WPA supplicant; Integrate - into NSH. From Simon Piriou (2017-05-02). - * 6LoWPAN: Replace some rime address naming with more consistent - short/extended address terminology (2017-05-04). - * wireless/ieee802154: Removes libradio to coincide with removal of - ioctl with radio. Moves all functionality from libradio to libmac. - From Anthony Merlino (2017-05-05). - * wireless/wapi: wpa_driver_wext_associate() now accepts a - configuration parameter that can be used to specify the wireless - properties (2017-05-06). - * nshlib: NSH now has configuration options to select the - wireless properties. It builds the configuration structure and - passes this to wpa_driver_wext_associate() so that it will set the - network as configured (2017-05-06). - * Add platform files for nucleo-l452re and nucleo-l496zg. From Juha - Niskanen (2017-05-08). - * wireless/ieee802154: Adds rxonidle attribute helpers. From Anthony - Merlino (2017-05-08). - * wireless/ieee802154: Adds sniffer functionality back in to I8SAK - app. From Anthony Merlino (2017-05-08). - * NSH wireless setup: Move call to nsh_associate(). It should be - possible to associate with an AP when DHCPC is disabled (2017-05-09). - * Fix some calls to task_create(): argv[0] is the first parameter, not - the name of the task (2017-05-09). - * wireless/ieee802154: Restructures i8sak app and adds blaster - functionality. From Anthony Merlino (2017-05-09). - * examples/configdata: add stacksize and priority. From Juha Niskanen - (2017-05-10). - * Bitbucket Issue 5: I found an unexpected behavior in apps/ - configuration generation. Adding external symbolic link in apps/ - directory and using Make.defs for Kconfig generation, Kconfig file - has a wrong path in the source argument. It contains original dir - path outside of the source tree instead path to sub-directory in - apps/. The problem is connected with make/system symbolic link path - resolution. Corrected by a patch submitted by Artur Madrzak with - Issue 5 (2017-05-11). - * Bitbucket Issue 5, apps build system: The previous patch wasn't - complete, it was just idea how to resolve issue. Please, find - attached issue5.patch to resolve it. It can be applied on top current - apps/master. From Artur Madrzak (2017-05-12). - * Fix the new can.h header location. From Alan Carvalho de Assis - (2017-05-12). - * Fix libcanard github download link to get it compiling correctly. - From Alan Carvalho de Assis (2017-05-12). - * Fix to use the new canardInit() function. From Alan Carvalho de - Assis (2017-05-12). - * apps/platform: Create gnu/ subdirectory that contains the one and - only GNU C++ initialization function. Remove all other C++ - initialization functions (2017-05-13). - * Move up_cxxinitialize() prototype from nuttx/include/nuttx/arch.h to - apps/include/platform/cxxinitialize.h (2017-05-13). - * apps/examples/nettest: Fix an error in pre-processor expression - (2017-05-13). - * wireless/ieee802154: i8sak adds event handling from MAC char driver. - From Anthony Merlino (2017-05-16). - * apps/examples/mtdpart: Prevent part array overflow. mtdpart examples - create partitions and allocate from 1 index not a 0 index to part[] - array. This cause buffer overflow for part array. This change fixes - this problem. From EunBong Song (2017-05-17). - * apps/examples/can: Fix can example app to print data when - CONFIG_EXAMPLES_CAN_READ is defined. From Alan Carvalho de Assis - (2017-05-17). - * apps/: Make more globals static to avoid name clashes. From Juha - Niskanen (2017-05-19). - * Ensure netlib will not be broken when setip will not bring the - network up anymore. From Sebastien Lorquet (2017-05-19). - * DHCPC: Remove hard-coded interface device. Now passed as a parameter - to dhcpc_open(). From Sebastien Lorquet (2017-05-19). - * nshlib: Fix a resource leak in cmd_hexdump(). From Nobutaka - Toyoshima (2017-05-22). - * wapi: add basic wapi_event_stream_extract implementation. From Simon - Piriou (2017-05-21). - * apps/system/dhcpc: Add a command to renew or establish a lease on an - IPv4 address (2017-05-21). - * apps/system/ntpc: Add a command to start or stop the NTPC daemon - (2017-05-21). - * apps/system/dhcpc: Add missing argument of fprintf (2017-05-21). - * apps/nshlib: Add a new option CONFIG_NSH_NETLOCAL that will suppress - some built in operations and will support manual configuration of a - wireless network (2017-05-21). - * apps/system/ramtest: Make stacksize and priority conigurable - (2017-05-22). - * The dedicated windows tool at tools/mkkconfig.bat uses $APPSDIR, - which is not a windows shell variable, and is left uninitialized, but - in fact should be the current directory. From Sebastien Lorquet - (2017-05-22). - -7.22 2017-09-06 Gregory Nutt - - * apps/system/composite: Update to apps/system/composite associated with - big changes to the composite device logic. From Frank Benkert - (2017-06-01). - * wireless/ieee802154: Modifies i8 to support running various routines. - From Anthony Merlino (2017-06-14). - * wireless/ieee802154: Rewrites i8sak to be test CLI for IEEE 802.15.4 - MAC layer. From Anthony Merlino (2017-06-14). - * NSH network initialization: Fix some ieee 802.15.4 initialization - logic. It should not set the saddr or panid; those cannot be - hard-coded but must come from the coordinator. Re-factor a function - that has gotten too big and too complex. Do not set the IP address - for 6loWPAN. The 6loWPAN stack uses IP address that derive from the - ieee 802.15.4 addressing and cannot be (safely) configured by the - user (2017-06-17). - * i8sak: Missing newline in fprintf output (2017-06-18). - * correct copy-paste typo in comments in composite_main.c From Oleg - Evseev (2017-06-18). - * Switches IEEE 802.15.4 based code to using byte arrays instead of - uint16_t values for short address and PAN ID. From Anthony Merlino - (2017-06-19). - * fix copy-paste typo in nsh_usbconsole.c. From Oleg Evseev - (2017-06-19). - * examples/udp: Add configurable network device name; Add option to - suppress network initialization which is not needed if started by NSH - or for 6LoWPAN (2017-06-19). - * nshlib: fix size of 6LoWPAN extended address (2017-06-18). - * examples/udp: Fix registration as a built-in program; Change some - naming to make room for a second target. Current one endpoint is the - target and one is the host. This will (eventually) allow two targets - to be both endpoints of the test. Change build so that both server - and client can be on a target, rather than one on the target one on - the host PC. Server IP address may not be provided on the command - line (2017-06-19). - * examples/smart: Fix some compilation errors. Obviously this test has - not been used in a LONG time (2017-06-20). - * examples/udp: Port numbers need to be configurable to work with - 6LoWPAN. Need to bind the client socket to a port number. This was - not required before so is a apparently a change in the UDP packet - dispatch logic (2017-06-20). - * ieee802154: Changes to support beacon-enabled networks. From Anthony - Merlino (2017-06-21). - * wireless/ieee802154: Adds option to make it easy to send large frame - for testing purposes. From Anthony Merlino (2017-06-21). - * examples/udp: Renaming some files to prevent name collision in - libapps.a. Fix naming of a configuration setting (2017-06-23). - * examples/nettest: Renaming some files to prevent name collision in - libapps.a and to prepare to support target boards on both ends of the - test. Separate out network initialization so that it may, - eventually, be used by both a target server and a target client. Fix - client/server naming confusion; add command line option to select the - server address on the target. Add support for both endpoints on - target boards vs. one on a target and one on the host PC - (2017-06-23). - * system/dhcpc: The DHCPC renew command did not build correctly due to - naming problems. Noted by Masayuki Ishikawa (2017-06-23). - * examples/nettest: Fixes for building with loopback device again after - the last changes (2017-06-23). - * examples/nettest: The send buffer size is now a configuration option - (2017-06-24). - * examples/udp and examples/nettest: Fix some naming collisions; - examples/nettest: Fix some build issues with two targets - (2017-06-25). - * ieee802154: Adds scan command. From Anthony Merlino (2017-06-25). - * ieee802154: Minor fix to setup logic for i8sak. From Anthony Merlino - (2017-06-25). - * ieee802154: start of scan/beacon-enabled network. From Anthony - Merlino (2017-06-26). - * netutils/telnetc: This a port of libtelnet to NuttX (2017-06-26). - * system/telnet: Add Telnet Chat daemon and and client from libtelent - (2017-06-26). - * NSH library: Add a Telnetd command. This is needed when network - initialization is deferred. In that case, telnet daemon cannot be - started until the network is finally initialized. The telnetd - command was added just for that case: So that the telnet daemon can - be started from the NSH command line after the network is configured - (2017-06-26). - * revise some of the state handling in the previous commit - (2017-06-26). - * system/telnet: POLL must not be disabled in configuration. Telnet - client port argument is no optional (2017-06-27). - * netutils/telnetd and users of telnetd: Add support for IPv6 - (2017-06-27). - * ieee802154/i8sak: Adds coordinfo command allowing you to poll various - attributes related to the coordinator. From Anthony Merlino - (2017-06-27). - * i8sak: Need to increment the next_saddr after each successful - association (2017-06-29). - * i8sak: Add a option to retry on failures to the assoc command - (2017-06-29). - * apps/examples/thttpd: Remove the netstats demo. This depends on an - illegal function call and cannot be supported. That example could be - replaced with logic that uses the procfs network entries as was done - for NSH which had the same issue. But I am too lazy to implement - that (2017-07-01). - * i8sak: Adds reset command to reset the MAC layer. Adds option to - assoc command -t to specify how long to wait for a response from the - Coordinator. From Anthony Merlino (2017-07-01). - * Eliminate a warning when both Ethernet and 6LoWPAN are enabled; - improve some naming (2017-05-02). - * ieee802154: Adds reset command, adds resp_waittime option to - associate, and a few other minor tweaks. From Anthony - Merlino(2017-07-02). - * NSH library: Fix build break in nsh_command.c with IPv4/IPv6 dual - stack. From Masayuki Ishikawa (2017-07-04). - * apps/examples/keypadtest: REMOVED and warehoused in the Obsoleted - repository. This was just a bad clone of apps/examples/hidkbd for a - keypad driver that was removed years ago. It also uses illegal - function calls into the OS. So it has no purpose: It is - redundant, it uses illegal interfaces, and is a test for non-existent - code (2017-07-04). - * tools/mkkconfig.bat: Use %cd% instead of %~dp0 for usage of APPSDIR - in this batch file (2017-07-05). - * system/dhcpc: Fix warning about renew_main.o appear twice in rule - (2017-07-05). - * tools/mkkconfig.bat: Remove quotes in echo. These were begin - Echo'ed and generating double quots in the output. From Jeff - (2017-07-05). - * Windows build fixes: tools/mkkconfig.bat - switch APPSDIR path to - use forward slashes for kconfig-frontends. interpreters/ficl - - Reorder some targets that causes GNUwin32 make to behave badly. From - Jeff (2017-07-06). - * platform/Makefile: More attempts to fix for Windows native build. - Backslash as a delimiter causes problems in pattern subsitutions - (2017-07-06). - * apps/examples/ipforward: Add beginning of an IP forwarding example - using only TUN devices. Test extended to test forwarding of ICMPv6 - multicast messages. Completes code for apps/examples/ipforward. - Still untested (2017-07-09). - * apps/netutils/tftpc: Missing header file causes errors in some - configurations (2017-07-10). - * Socket I/F: Cleanup for good CONFIG_NET_PKT build (2017-07-14). - * netutils/netlib: Fixes to work when only USRSOCK is enabled - (2017-07-14). - * apps/system/composite: Remove CDC/ACM and MSC configuration logic. - This belongs in the OS composite initialization. Add and argument so - that you can select the USB composite configuration to be attached. - Restore USB tracing; remove unused field in a structure. Remove - configuration settings that are no longer used. Fix configuration - selecting.. was setting the port number, not the configure ID. Also - add a configuration option to select the default configuration - (2017-07-15). - * apps/system/composite: Add a configuration option to the boardctl() - calls to support multiple composite device configurations dynamically - (2017-07-16). - * i8sak: Minor formatting fix. From Anthony Merlino (2017-07-10). - * wireless/ieee802154/i8sak: Minor setting changes. From Anthony - Merlino (2017-07-17). - * ieee802154/i8sak: Adds command to trigger regdump of radio. From - Anthony Merlino (2017-07-18). - * apps/system/composite: Remove references to USBMSC. There still - dependencies on CDC/ACM in the serial USB trace output. That really - should be removed (2017-08-21). - * netutils/ftpc: Fix some memory leaks. From Boris Astardzhiev - (2017-07-27). - * Implement powermonitor example for ltc4151 current and voltage - monitor. From Giorgio Groß (2017-07-28). - * NSH: Misc changes needed for PktRadio support (2017-07-30). - * examples/nettest/: Loopback option should be available in Kconfig - for PktRadio (2017-08-01). - * apps/netutils/netlib: Add support for PktRadio IOCTL commands - (2017-08-02). - * NSH library: Extend ifconfig command so that it can set variable - length packet radio address (2017-08-02). - * netutils/netlib: Fix netlib_nodaddrconv() so that its return type is - the same as other address conversion functions. NSH: Correct parsing - of ifconfig so that you can specify the HW address without specifying - the IP address (2017-08-02). - * apps/examples/udp: Enable testing with the broadcast address - (2017-08-08). - * Remove references to obsoleted CONFIG_NETDEV_MULTINIC and - CONFIG_NETDEV_MULILINK (2017-08-08). - * NSH library: Update addroute and delroute command. The would - support either IPv4 or IPv6, but not both. Allow expression of the - netmask in IPv4 CIDR or IPv6 slash notation. This really reduces the - pain of using the commands, especially for IPv6 (2017-08-10). - * NSH Library: Add a route command that will dump the content of - routing table (2017-08-11). - * apps/netutils/tftpc depends on CONFIG_NET_IPv4 (2017-08-12). - * Application.mk: Add the .PRECIOUS target to prevent libapps.a from - being deleted when the make is interrupted (2017-08-12). - * apps/examples/nximage: Remove unused global variable (2017-08-12). - * netutils/thttpd: Fix a malformed if condition detected by GCC 6.x.x - (2017-08-12). - * All Makefiles: Add .PRECIOUS: apps/libapps.a to every Makefile. - Hopefully this will end awkward problems when you Control-C out of a - build and libapps.a is deleted (2017-08-13). - * The last change added .PRECIOUS: $(BIN) to everyway Makefile in hopes - the libapps.a will not be deleted on Control-C (unproven so far). - However, $(BIN) may contain back slashes in some build platforms and - that causes problems for make: It can't handle the backslashes in - the .PRECIOUS dependency list. $(BIN) replaced with ../../libapp.a, - where the number of ../ depends on the depth of the Makefile in the - apps/ source tree (2017-08-13). - * netutils/netlib: Add a helper to decode short addresses - (2017-08-18). - * apps/examples/pf_ieee802154: Add for testing PF_IEEE802154 sockets. - Add PANID to command line options; Cannot bind to address zero... - There is no counterpart to INADDR_ANY for these radios (not now at - least) (2017-08-19). - * Changes to netlib and nsh so that you build build with PF_IEEE802154 - enabled and 6LoWPAN disabled (2017-08-20). - * netutils/netlib: If only PF_IEEE802154 socket family is enabled, then - must use SOCK_DGRAM (2017-08-21). - * NSH: Add conditions so that ifconfig and ifup will not be disabled - if we are using only PF_IEEE802154 (2017-08-21). - * dhcpd: Prevent buffer overflow in dhcpd_addoption. offset represents - distance from start of option buffer. So this should be changed - current option pointer minus start of buffer. From EunBong Song - (2017-08-25). - * apps/examples/nsh: Remove APPNAME, PRIORITY, and STACKSIZE settings - from Makefile to avoid showing nsh in Builtin Apps. From Masayuki - Ishikawa (2017-08-26). - * examples: add DAC example. From Juha Niskanen (2017-09-1). - -7.23 2017-12-04 Gregory Nutt - - * examples/ostest: sem_open() now returns SEM_FAILED in the event of a - failure (2017-09-08). - * examples/adc: Fix g_adcstate.count initialization. From Masayuki - Ishikawa (2017-09-11). - * examples/fb: Flesh out the framebuffer driver test. examples/fb: - Add a simple test for the framebuffer character driver. This initial - commit just verfies some interfaces and initialization logic. Still - need to add to graphics update logic (2017-09-12). - * Rename CONFIG_AUDIO_DEVICES to CONFIG_DRIVERS_AUDIO to conform better - to the evolving configuration naming standard (2017-09-12). - * examples/fb: Extend test to include 1-bpp monochrome (2017-09-13). - * Added a simple reader example for the LIS3DSH acceleration sensor on - STM32F4Discovery. From Florian Olbrich (2017-09-14). - * wireless/ieee802154/i8sak: Adds socket interface support. You can now - use both socket or char driver to control the MAC layer. From Anthony - Merlino (2017-09-15). - * wireless/ieee802154/i8sak: Fixes several bugs. Adds sniffer port - option and a few other get/set parameters. From Anthony Merlino - (2017-09-15). - * i8sak: Updates README to include details about socket interface and - new addressing setup and fixes warning. Fix warning about - uninitialized variable. From Anthony Merlino (2017-09-15). - * apps/examples/apa102: Add a Rainbow example for APA102 LED Strip. - From Alan Carvalho de Assis (2017-09-18). - * netutils/netlib: Add netlib_ipv6adaptor() and netlib_ipv4adaptor() - (2017-09-19). - * netlib_ipv[4|6]adaptor: Add a check to handle the case where the - network device configuration changed asynchronously and the second IOCTL - returns more data than the allocated buffer (2017-09-20). - * apps/netutils/netlib: Add helpers for reading the routing table: - netlib_read_ipv4route() and netlib_read_ipv6route() (2017-09-20). - * apps/netutils/netlib: Add new utilities netlib_ipv[4|6]router() that - can be used to determine the IP address of a router that would be used - some some destination IP address that is not locally accessible - (2017-09-20). - * apps/netutils/netlib: netlib_ipv[4|6]adaptor() will now use the new - routing table interfaces if they are available: If the destination IP - address does not correspond to the network served by any device, then - the address of the router that should get us to the correct sub-net is - is determined. Then the network adaptor that can communicate with the - that router has the IP address that will returned (2017-09-20). - * apps/examples/flowc: Add a simple test of serial hardware flow control - (2017-09-23). - * apps/examples/qencode: The QENCODER name was changed to - SENSORS_QENCODER fix it here. From Alan Carvalho de Assis (2017-09-24). - * nshlib/nsh_parse.c: Avoid truncating the strcmp result into a unsigned - char variable. nshlib/nsh_netcmds.c: Check for valid hostip before - using it. nshlib/nsh_ddcmd.c: Fix resource leak when 'if=' or 'of=' - params are repeated in the command line. For example: - - dd if=/dev/null if=/dev/zero of=/dev/null or - - dd if=/dev/zero of=/dev/zero of=/dev/null - From Bruno Herrera (2017-09-25). - * nshlib/nsh_netcmds.c: Fix a compilation error when IPv4/IPv6 dual - stack is enabled. From Masayuki Ishikawa (2017-09-26). - * apps/examples/flowc: Add a delay between received packets in order to - force input flow control (2017-09-26). - * apps/examples/flowc: Fix some errors in receiver's verificationg - logic. Add a 'canned' data file so that we don't need to deal with the - sender program; we can just 'cat' the canned data file (2017-09-26). - * apps/examples/flowc: Add some syslog output to flush the syslog - interrupt buffer (2017-09-27). - * apps/examples/flowc: Small improvement to break line if more than 80 . - were printed. From Alan Carvalho de Assis (2017-09-27). - * apps/examples: In elf and nxflat examples, remove low-level - interfaces and replace with call to exec() (2017-10-02). - * examples/elf and nxff: Won't build with CONFIG_BUILD_KERNEL because - the interface exec() is not available in that configuration. Also, - remove a stray comma and a stray semacolon in examples/pty_test/Kconfig - and examples/random/Kconfig (2017-10-06). - * Add powerled driver example. From Mateusz Szafoni (2017-10-08). - * examples/ostest: Works around a bug in printf() when cancellation - points are enabled. printf() is a cancellation point because it calls - write(). This is correct according to OpenGroup.org. However, printf - holds the stdio library semaphore when it is canceled and this leaves - the semaphore in a bad state. No fix for the printf bug yet (2017-10-10). - * examples/ina219: A simple infinite loop that polls the INA219 sensor - and displays the measurements. From Sebastien Lorquet (2017-10-11). - * examples/ostest: Extend cancellation test to make sure that cancelable - threads waiting on a message queue or on a signal can be canceled - (2017-10-12). - * netutils/ftpc: Fix some crazy comparisons to determine is a file is - an absolute path. Noted by Anthony Merlino (2017-10-13). - * examples/nx: The NX example no longer supports single user mode - (2017-10-14). - * examples/nxtext: The nxtext example no longer supports single user - mode (2017-10-14). - * examples/lcdrw: Remove this example. It violates the portable OS - interface and cannot be retained (2017-10-14). - * graphics/traveler: Restore most of what was removed in the previous - commit. That non-standard logic is currently needed by the simulation. - It should be replaced with use of a framebuffer driver. No longer - supports single user graphics mode (2017-10-14). - * examples/nxhello now supports only multiuser mode (2017-10-14). - * examples/nximage now supports only multiuser mode (2017-10-14). - * system/lm75: Fix a naming error in a dependency. From Alan Carvalho - de Assis (2017-10-14). - * examples/nxlines now supports only multiuser mode (2017-10-14). - * exampls/nxhello: Increase the amount of time that the text is - displayed before erasing it (2017-10-15). - * Add -n samples to lm75 app and replace Centigrade with Celsius. From - Alan Carvalho de Assis (2017-10-15). - * graphics/traveler: Convert to use the framebuffer driver (2017-10-16). - * examples/alarm: add options for reading alarm value and canceling it. - From Juha Niskanen (2017-10-17). - * apps/fsutils/mkfatfs: Move mkfatfs from the OS to here. Not fully - integrated on the initial commit (2017-10-20). - * apps/examples/adps9960: Add ADPS-9960 example. From Alan Carvalho de - Assis (2017-10-23). - * This commit eliminates the ping command from NSH and replaces it with - a ping 'built-in' at apps/system/ping. The original NSH version of ping - violated the portable POSIX interface and, hence, had to be removed. - The new system/ping command uses the new IPPROTO_ICMP AF_INET datagram - sockets to implement ping (2017-10-23). - * apps/system/ping6: Use inet_ntop() to improve the appearance of the - ping6 IPv6 address output. Fix a typo and also a place where = used - when == intended. This commit removes the ping6 command from NSH and - replaces it with the apps/system/ping6 built-in command. The NSH ping6 - command had to be removed because it violated the portable POSIX OS - interface. The apps/system/ping6 command uses the sem-standard - IPPROTO_ICMP6 socket interface (2017-10-24). - * apps/nshlib: ifconfig improvements. From Anthony Merlino (2017-10-24). - * nshlib: mount command no long uses the non-standard OS interface - foreach_mountpoint(). Now simply cats /proc/fs/mount when there are no - arguments to the mount command (2017-10-26). - * nshlib: df command no long uses the non-standard OS interface - foreach_mountpoint(). Now simply cats /proc/fs/blocks or /proc/fs/usage - (2017-10-26). - * Fix parsing of empty strings when CONFIG_NSH_CMDPARMS is not defined. - Problem noted by Juha Niskanen (2017-10-27). - * apps/canutils/libobd2: Add libobd2 for NuttX. From Alan Carvalho de - Assis (2017-10-28). - * apps/examples/obd2: Add OBD2 example application. From Alan Carvalho - de Assis (2017-10-28). - * include/netutils/netlib.h: Broaden socket definitions of previous - commit. Add definitions needed when only local Unix domain sockets are - supported (2017-10-30). - * apps/examples/userfs: Add a test case for verifying UserFS - (2017-10-31). - * Fixed i2ctool write operation in `no restart` mode (flag `-n`). It - seems that I2C driver has changed a bit since i2ctool was written, so - now i2ctool sends repeated start even if `no restart` flag (-n) was - passed to it. From Dmitriy Linikov (2017-11-01). - * Fixed misprint in cmd_wget. From Dmitriy Linikov (2017-11-01). - * apps/examples/userfs: Fix bad logic in test stat() implementation - (2017-11-01). - * i8sak: Changes 'notif' to 'primitive' corresponding to the changes in - the Kernel. From Anthony Merlino (2017-11-01). - * Adds i8shark, a sniffer "adapter" that captures all 802.15.4 traffic, - packages it into a Wireshark ZEP packet, and sends it to a host running - Wireshark From Anthony Merlino (2017-11-01). - * apps/examples/userfs: Fix check for open with write+append mode - (2017-11-01). - * apps/fsutils/mkfatfs: When fsutils/mkfats was split off from the - operating system, there were a few dangling things left. Some - references to functions in the OS (which are not available in the - protected and kernel modes) and several types and function prototeypes - that don't exist is apps/fsutils/mkfatfs (2017-11-02). - * Fixed the compilation of nsh_routecmds.c, broken after commit - 6b9d23c6aa0247c701acf1d0ecdaececf546342a. From Dmitriy Linikov - (2017-11-03). - * include/netutils/netlib.h: In order to avoid pre-processing warnings, - NETLIB_SOCK_FAMILY must always be assigned a value, even if there is no - real meaning value for it (2017-11-03). - * i8sak: Channel setting is now saved locally, so when performing a - startpan or assoc, the channel previously set is still used, even though - the MAC layer gets reset. Also fixes a few build issues. From Anthony - Merlino (2017-11-03). - * examples: add SMPS driver example. From Mateusz Szafoni (2017-11-05). - * smps, powerled examples: fix floating point format in printf. From - Mateusz Szafoni (2017-11-05). - * apps/examples/userfs: Handle the O_TRUNC open flag. Fixes a bug with - double freeing open data when dup'ed files are closed (2017-11-06). - * apps/examples/ltdc: Remove apps/examples/ltdc. It violates the - portable POSIX interface by calling directly into OS code (2017-11-06). - * FTP: Adds support for IPv6 and fixes various transfer issues. From - Anthony Merlino (2017-11-06). - * netutils/ftpc: Eliminate warnings about types of inputs to - netlib_ipv4adaptr() and about ftp_cmd_pasv() being defined but not used - (2017-11-12). - * apps/system/free: Removed because it violates the portable POSIX OS - interface (2017-11-13). - * apps/nshlib: The free commands no longer used mallinfo() to get the - state of the use heap. Two reasons: That is not useful information in - the kernel build. And (2) there are other memory resources of interest - in other configurations such as the Kernel heap in PROTECTED and KERNEL - builds, and the prog mem uses when FLASH is used to hold modifiable - data. The free command has been extended to just dump the content of - procfs entries and to include all of these other memory resources of the - procfs entries are available (2017-11-13). - * apps/nshlib: Big simplification of last change. /proc/kmm, umm, and - progmem have been replaced with a single procfs file called - /proc/meminfo. The NSH free command now degenerates to a simple dump of - /proc/meminfo (2017-11-13). - * apps/graphics/pdcurs34: This commit brings the basic public domain - pdcurses library into NuttX. This library is complete but not yet - usable because it still requires the NuttX interfacing code needed hook - pdcurses into the NuttX graphics drivers. Also test cases are needed to - verify the pdcurses integration (2017-11-17). - * apps/examples/pdcurses: Bring in pdcurses demos and make them conform - to the NuttX coding style (not yet hooked into the build system) - (2017-11-18). - * apps/graphics/pdcurs34: Extend configuration to select the font size - (2017-11-18). - * apps/example/pdcurses: Add logic to build one of the several pdcurses - demo/test programs (2017-11-18). - * apps/graphics/pdcurs34/nuttx: Completes first cut at framebuffer - rendering logic. Add NuttX framebuffer color management and beginning of - some rendering logic (2017-11-19). - * apps/examples/pdcurses/: Fix a few more bugs found in testing; Brings - in the remaining pdcurses demo programs (2017-11-19). - * apps/graphics/pdcurs34: Add support for discrete joystick input. - This is sufficient to get through all menuing tests that do not require - text input (2017-11-22). - * apps/graphics/pdcurs34: Add support for greylevels vs. RGB. Define - pdc_color_t based on pixel depth, not on specific color format. Need to - set the global COLORS or else all displays on monochrome (2017-11-22). - * i8shark: Adds CONFIG_IEEE802154_I8SHARK_XBEE_APPHDR option to remove - XBee's application header before sending to Wireshark. This option will - corrupt any traffic received that does not include this application - header. From Anthony Merlino (2017-11-22). - * apps/wireless/ieee802154/i8sak: Adds ability to get/set rxonidle - setting for MAC layer. From Anthony Merlino (2017-11-xx). - * apps/examples/fb: Fix calculation of a mask value (2017-11-22). - * NxWidgets: Move from apps/NxWidgts to apps/graphics/NxWidgets - (2017-11-24). - * apps/examples/pdcurses: Add a very simple example that just shows the - entire character set (7-bit only). It adapts to the size of the - framebuffer and, hence, can be used with very tiny displays. In fact it - looks really dumb on big displays (2017-11-24). - * apps/examples/fb: Add a small delay between updating each rectangular - region (2017-11-25). - * apps/examples: CONFIG_QENCODER was renamed to CONFIG_SENSORS_QENCODER: - update README.txt. From Fabio D'Urso (2017-11-25). - * apps/graphics/pdcurs34: Initial steps to support less than 8-pixel - fonts on less than 8-bit display. Calculation of font buffer stride - must depend on the configured BPP. Add first cut at function to copy a - font into the font buffer; Make better use of macros to reduce code - complexity (2017-11-27). - * apps/examples/nunchuck: Add Nunchuck example application. From Alan - Carvalho de Assis (2017-11-28). - * apps/graphics/pdcurs34: Correct logic that sets the font buffer to - the background color for the case of BPP < 8 (2017-11-29). - * apps/examples/pdcurses: Clean up charset example so that the display - geometry is better on very wide displays (wide with respect to the width - of a character) (2017-11-30). - -7.24 2018-03-02 Gregory Nutt - - * i8shark: Fixes special XBee compensation by purposely chopping off the - FCS. From Anthony Merlino (2017-12-08). - * nxplayer: Add support for http streaming in nxplayer. From Masayuki - Ishikawa (2017-12-19). - * Adds 'setlogmask' application that allows you to set the syslog - priority via a simple command. From Anthony Merlino (2017-12-19). - * apps/netutils/ftpc: Fix some cornercases that could cause FTP to - access past the end of valid data. From Gregory Nutt (2017-12-21). - * examples/userfs: Add truncate() support for userfs. From Gregory Nutt - (2018-01-03). - * apps/nshlib: Add support for a truncate command. This will be used - to test the new ftruncate file system support. From Gregory Nutt - (2018-01-04). - * nshlib/nsh_telnetd.c: Add support for telnet character mode. From - Masayuki Ishikawa (2018-01-10). - * apps/nshlib: Add support for '-n' option to the echo command. From - Masayuki Ishikawa (2018-01-10). - * apps/nshlib: Add irqinfo command. From Gregory Nutt (2018-01-12). - * apps/system/usbmsc: Added Kconfig options to configure write - protection for each LUN. From Fabio D'Urso (2018-01-14). - * apps/examples/lvgldemo: Add lvgldemo example. From Alan Carvalho - de Assis (2018-01-16). - * apps/graphics/littlevgl: Add littlevgl library. From Alan Carvalho - de Assis (2018-01-16). - * apps/examples/touchscreen: Eliminate BOARDIOC_TSCTEST_SETUP. From - Gregory Nutt (2018-01-17). - * apps/examples/lvgldemo: Can no longer call boardctl() to initialize - graphics hardware if needed. From Gregory Nutt (2018-01-18). - * apps/netutils/netlib: Add default route in netlib_set_dripv4addr(). - From Masayuki Ishikawa (2018-01-19). - * system/stackmonitor: Re-design the stack monitor so that it does not - make forbidden calls directly into the OS, breaking the portable POSIX - OS interface. It now properly uses the PROCFS file system to glean - information about stack usage. From Gregory Nutt (2018-01-20). - * apps/nshlib: Fix compile error when CONFIG_NSH_DISABLESCRIPT is not - defined. The field np_flags does not exist if scripting is disabled. - From Gregory Nutt (2018-01-22). - * apps/examples/veml6070: Add VEML6070 Application Example. From Alan - Carvalho de Assis (2018-01-28). - * examples/bmp180: Add BMP180 application example. From Alan Carvalho - de Assis (2018-02-04). - * apps/graphics/ft80x: Add the FTDU FT80x GUI support library. - Consists of some display list helpers, audio helpers, touch helpers, RAM - access, register access etc. From Gregory Nutt (2018-02-18). - * apps/examples/ft80x: Add a test of the FT80x based on FTDI - SampleApp. Includes tests of GPU primitives and graphics co-processor - commands From Gregory Nutt (2018-02-18). - * apps/graphics/ft80x and apps/examples/ft80x: Fix a few compile-relate - issues introduced with last merge. From Gregory Nutt (2018-02-19). - * apps/examples/ft80x: Add a few more demos of GPU primitive - operations. From Gregory Nutt (2018-02-19). - * Added ECANCELED condition to DEBUGASSERT-s checking sem_wait result. - From Dmitriy Linikov (2018-02-20). - -7.25 2018-06-03 Gregory Nutt - - * apps/netutils/tftpc: This commit modifies the TFTP client functions to - use a data read/write callback instead of a file. This allows TFTP to - write to arbitrary destination (in my case, a MTD device - for firmware - update). Two new functions are introduced for this, named tftpget_cb and - tftpput_cb. They are just made of most of the existing code. The - previously existing tftpget/tftpput functions are now wrappers on the new - ones, with callbacks that read/write from files, so my modifications are - backwards compatible with existing applications, eg the associated nsh - commands don't need to be changed. From Sebastien Lorquet (2018-03-09). - * apps/examples/ft80x: Fix some size calculations. Add option to disable - primitive tests... just too boring to have to watch over and over again. - Fix a typo in backlight fade logic; Fix error in formatted display light - debug dump output. From Gregory Nutt (2018-03-09). - * apps/examples/ft80x: Text is handled by the coprocessor and, hence, must - use RAM_CMD, not RAM_DL. From Gregory Nutt (2018-03-09). - * apps/examples/ft80x: Fix some errors in co-processor demos. Correct an - error in the spinner demo. From Gregory Nutt (2018-03-10). - * apps/examples/netloop: Update network loopback example so that it can be - used to test TCP KeepAlive. From Gregory Nutt (2018-03-12). - * apps/system/stackmonitor: Fix comparison between pointer and zero - character constant. From Juha Niskanen (2018-03-13). - * apps/system and wireless: Applications should use the standard clock() - interface, not the internal NuttX clock_systimer() interface. From - Gregory Nutt (2018-03-14). - * apps/examples/lzf: Add the test case from Marc Alexander Lehmann's - LIBLZF3.6 librrary From Boris Astardzhiev (2018-03-14). - * apps/examples/lzf: lzf_compress() now expects the hash table as user - allocated input parameter rather than declaring the huge array on the - stack. From Gregory Nutt (2018-03-15). - * apps/examples/lzf: unlzf and lzcat are not supported. From Gregory Nutt - (2018-03-15). - * apps/examples/lzf: Fix name composition and set defaults early in main. - From Boris Astardzhiev (2018-03-15). - * apps/examples/nsh and posix_spawn: Must not call exec_setsymtab() - directly. That is a non-POSIX internal OS interface. From Gregory Nutt - (2018-03-16). - * apps/system/lzf: Move the LZF tool from apps/examples/ to apps/system. - From Gregory Nutt (2018-03-16). - * apps/system/lzf: Don't build the LZF tool if the LZF library is not - enabled. From Gregory Nutt (2018-03-16). - * apps/system/lzf: Refactor so that the user is no longer required to - generate the LZF header From Boris Astardzhiev (2018-03-16). - * apps/system/lzf: (1) The maximum block size is now configuration setting - in order to give finer control over memory usage. (2) The - compression/decompression buffers have been moved out the stack and are - now global variables. This eliminates the need to set large stack sizes - to use this utility. (3) Added semaphore protection of all global - variables for the case of the FLAT or PROTECTED builds. Unlike the - KERNEL build, the same global variables will be used by each instance of - the LZF utility. If you want thread safety, then you must either (a) - serialize all access to the global variables, or (b) pack the global - variables into a structure and allocate that structure on each execution - of lzf_main(). From Gregory Nutt (2018-03-17). - * apps/examples/cromfs: Add an example of how to build a CROMFS file - system image. From Gregory Nutt (2018-03-20). - * Remove canutils/libuavcan and examples/uavcan. libuavcan has not built - for a year or so. The basic problem is that as NuttX advances, the old - frozen version of libuavcan has become absolute because it violates the - portable POSIX OS interface. No one is maintaining the port so there is - no alternative but to remove it. From Gregory Nutt (2018-03-23). - * apps/examples/elf: Extend the ELF program module demo so that you can - use compressed ELF programs with CROMFS. From Gregory Nutt (2018-03-24). - * apps/examples/elf: Use strip command to make ELF binaries MUCH smaller. - Add an option to strip debug symbols even if the debug symbols are - enabled in the base code. From Gregory Nutt (2018-03-25). - * apps/wireless/bluetooth/btsak: Add a Bluetooth debugt tool. From - Gregory Nutt (2018-04-02). - * apps/netutils/netlib: Various fixes needed to get a clean netlib build - with Bluetooth only. From Gregory Nutt (2018-04-03). - * apps/examples/cc3000: Remove the CC3000 example. From Alan Carvalho de - Assis (2018-04-04). - * apps/examples/smps: Fix typos in Kconfig. All power, voltage, current - values were strings with no default. I assume they should be 'int' with - what default? From Gregory Nutt (2018-04-04). - * examples/powerled: Add arch initialization; examples/smps: fixes in some - printf and in Kconfig From Mateusz Szafoni (2018-04-07). - * apps/examples/adxl372_test and lxm330spi_test: Add ADXL372 and LSM330 - tests. From Bob Feretich (2018-04-09). - * apps/examples/max31855: Add an example to read multiple max31855 sensors - From Tiago Almeida (2018-04-09). - * apps/examples/ostest: Do not call AIO test without - CONFIG_EXAMPLES_OSTEST_AIO From Juha Niskanen (2018-04-11). - * apps/examples/nxdemo: Add nxdemo application From Alan Carvalho de - Assis (2018-04-28). - * apps/system/embedlog: Support for embedlog data logging package from - https://embedlog.kurwinet.pl/ From Michal Lyszczek (2018-05-06). - * nshlib/nsh_fscmds.c: Add the mkfatfs -r option which can be used to - specify the number of entries in the FAT12/FAT16 root directory. From - Boris Astardzhiev (2018-05-11). - * apps/system/zmodem: Add an option to enable hardware flow control via - termios. Fix Makefile.host. It was broken when zmodem.h was moved to - apps/include/system. Fix an incompatibility with the way that CRCs are - calculated. Allow stack size and priority to be configured. From - Gregory Nutt (2018-05-27). - * apps/system/zmodem: Call tcflush() before closing the serial port. This - is necessary because that close operation may hang if hardware flow - control is enabled. Consider this scenario: After the host sz runs on - the host, it exits and leaves CTS high. The target rz completes, and - tries to close the serial port. But if there is buffered Tx data, then - the close will hang when it tries to drain the buffered Tx data since - there is no where it can go. tcflush() discards the buffered data and - permits the close to continue. There is additional logic in - nuttx/drivers/serial needed to work with this. From Gregory Nutt - (2018-05-27). - * apps/, Various Makefiles: Fix mixed references to nuttx/lib. These need - to be changed to nuttx/staging. From Gregory Nutt (2018-05-30). - * Various fixes necessary to build the simulator under MSYS1. From Gregory - Nutt (2018-05-31). - * apps/Makefile and platform/Makefile: At clean_context targets that are - now invoked from the main nuttx/Makefile. From Gregory Nutt (2018-05-31). - -7.26 2018-09-08 Gregory Nutt - - * apps/netutils/ftpc: Fix handling of url-encoded strings From - Dmitriy Linikov (2018-06-04). - * apps/examples/i2sloop: Add i2sloop application. This application - can be used to test I2S loopback like: nsh> i2sloop & - From Masayuki Ishikawa (2018-06-06). - * nsh_parse.c: fix 'while' and 'until' loop condition - The loop condition logic was inverted: while true; do echo "test"; - done - would exit immediately, while using 'until' would stay in the loop. - This is the opposite of how it is supposed to work. - The reason is that 'state' was set wrong because 'whilematch' is a - bool. From Beat Küng (2018-06-06). - * examples: Adds example to test framebuffer overlay From Marco Krahl - (2018-06-06). - * apps/examples/ostest: Signal handling tests should use the same - configurable stack size as used in other tests, not - PTHREAD_STACK_DEFAULT. From Gregory Nutt (2018-06-07). - * apps/system/taskset: Add taskset command for SMP systems. This - command can be used to retrieve or set a process's CPU affinity. - For example, - - nsh> taskset -p 4 - pid 4's current affinity mask: 2 - - nsh> taskset -p 3 4 - pid 4's current affinity mask: 3 - - nsh> taskset -p 1 busyloop & - - From Masayuki Ishikawa (2018-06-08). - * apps/gpsutils/minmea: Include wchar.h in minmea.c file to fix wint_t - error From Alan Carvalho de Assis (2018-06-09). - * apps/examples/gps: Add GPS example using MINMEA lib From Alan - Carvalho de Assis (2018-06-09). - * apps/Make.defs: Fix an error introduced with recent chagne. - MKKCONFIG may not be defined resulting in failure to create - apps/Kconfig. From Gregory Nutt (2018-06-11). - * examples/powerled: add arch initialization; examples/smps: fixes in - some printf and in Kconfig - testing: add Unity - unit testing library from ThrowTheSwitch.org - From Mateusz Szafoni (2018-06-15). - * apps/wireless/wapi: Remove dependency on CONFIG_EXPERIMENTAL from - Kconfig From Gregory Nutt (2018-06-17). - * Remove apps/interpreters/micropthon. There are several reasons for - this. (1) the current version 1.3.8 is very old and no one is - supporting it. (2) the port only includes the core micropython logic - and none of the Python libraries. As such it is useless in any real - application. (3) There have recently been compile failures - reported. It looks like this is due to changes in newlib based - toolchains that now bring in incompatible newlib header files. See - issue 104 at - https://bitbucket.org/nuttx/nuttx/issues/104/build-micropython-138-error. - With no one dedicated to the support of micropython, it can no longer - be carried in the NuttX apps/ repository. From Gregory Nutt - (2018-06-18). - * apps/nshlib/README.txt: Clarify arguments to the mkrd command. From - Gregory Nutt (2018-06-22). - * testing/unity: add configuration options for exclude setjmp and - output color From Mateusz Szafoni (2018-06-23). - * apps/netutils/dhcpc: Activates BINDTODEVICE if available, and break - up some long lines From Gregory Nutt (2018-06-25). - * apps/examples/tcpblaster: Add TCP performance measurement test. - From Gregory Nutt (2018-07-05). - * apps/examples/dsptest: Add unit test for Nuttx DSP library From - Mateusz Szafoni (2018-07-07). - * apps/examples/helloxx: Add main() for CONFIG_BUILD_KERNEL From - Masayuki Ishikawa (2018-07-13). - * apps/examples/nsh: Add logic to automatically register an - application symbol table as part of NSH initialization. From - Masayuki Ishikawa (2018-07-13). - * There many occurrences of the global variable g_exports and the - opportunity for collisions. Make the global variable names unique. - From Gregory Nutt (2018-07-14). - * apps/examples/nsh: The symbol table name and size variable names can - now be configured. From Gregory Nutt (2018-07-14). - * import/: Add Makefile.symtab which can be used to compile the - dynamically created symbol table C file. Add tools/mksymtab.sh. - From Gregory Nutt (2018-07-15). - * apps/tools: Add +x to mksymtab.sh. - apps/examples/nsh: Fix compile errors with - CONFIG_EXAMPLES_NSH_SYMTAB=y From Masayuki Ishikawa (2018-07-17). - * apps Makesystem: Fix an error when building apps/ without nuttx/, - using only the NuttX export package and assuming that the nuttx/ - directory in not even present. In this case, the problem fixed where - the apps/Make.defs file was selecting tools from the /tools directory - which does not exist because TOPDIR=apps/import. Instead, for this - build case, I have not thought of any option but to duplicate scripts - as necessary in the apps/tools directory. Also added a top-level - target to compile the symbol table. Misc fixes: quoting in scripts, - some errors in script syntax. From Gregory Nutt (2018-07-17). - * apps/tools: Fix an error in mksymtab.sh From Masayuki Ishikawa - (2018-07-19). - * examples/lvgldemo/ and graphics/littlevgl/: Update LVGL to version - 5.1.1 From Alan Carvalho de Assis (2018-07-19). - * fs/fat: Clean up some name BS_ and MBR_ refer to the same record and - should use the same naming (MBR_). From Gregory Nutt (2018-07-22). - * Add definitions for the FAT boot record (FBR). From Gregory Nutt - (2018-07-22). - * nxplayer: Refactor nxplayer.c. Apply netlib_parsehttpurl() and - remove unnecessary usleep(). From Masayuki Ishikawa (2018-07-31). - * apps/system/i2c: Adapt to rename I2C_M_RESTART->i2C_M_START. - I2C_M_NOSTOP should be in flags of first message in every write-read - and write-write message sequence. From Gregory Nutt (2018-08-03). - * include/netutils/netlib.h: Eliminate a warning about AF_UNSPEC and - AF_INET not defined. From Gregory Nutt (2018-08-03). - * Introduce a build system for loadable apps for nsh. - apps/Make.defs: Override COMPILE and COMPILEXX macros to compile - loadable apps. To make loadable apps, -DLOADABLE_APP is added to the - flags. Also, introduce ELFLD to link a lodable app. - apps/Application.mk: Add .build target in case of 'LOADABLE=y' which - is used to link a final loadable application and install the app to - apps/bin. - apps/Makefile: Add SYMTABSRC and SYMTABOBJ variables for loadable - apps which will be generated under the apps directory. Add - make_symbols target which will be called when all applications are - installed to generate symtab_app.c which is used for nsh to inform - symbol information to the NuttX kernel. If the application is - specified to 'm', the variable 'LOADABLE' must be defined here. Also - note that other variables (PRIORITY and STACKSIZE) can only be used - for built-in apps. - apps/nshlib/Kconfig: Add 'option modules' to NSH_FILE_APPS so that a - user can change an application configuration to tristate (y/n/m) - apps/examples/hello and helloxx: Apply changes to support a loadable - app. Makefile: Change the condition to build. By default, the - application is not selected (i.e. 'n'), so if other states (i.e. y/m) - are selected, the application will be compiled. Please note that - the variable 'LOADABLE' must be defined in each application Makefile - if you want to make a loadable app. Change the application state - from bool to tristate in the Kconfig file. Add LOADABLE_APP - condition to main(). From Gregory Nutt (2018-08-03). - * apps/examples/elf: CROMFS and ROMFS configuration currently only - usable in FLAT build. Add configuration to use ELF objects on - external media like SD card or USB drive instead. From Gregory Nutt - (2018-08-04). - * apps/examples/elf: If the test ELF files are on media in removable - media such as SD or USB FLASH, the wait until the media has been - installed and initialized before starting the test. From Gregory - Nutt (2018-08-04). - * apps/examples/module: Add support for CROMFS and for stripping - symbols from ELF module binaries. From Gregory Nutt (2018-08-05). - * examples/module: Add support for automounting removable media. This - involves a wait for the block driver to become available before - performing the mount. From Gregory Nutt (2018-08-05). - * apps/system/cle: Usage improvements including command line history - (taken from readline) and support for addition control characters. - From mst (2018-08-05). - * apps/nshlib: Add parsing support for back-slash quoted characters. - Currently only implemented properly if CONFIG_NSH_ARGCAT is also - selected. This commit is in response to Bitbucket Issue 11 opened by - Maciej Wójcik From Gregory Nutt (2018-08-06). - * apps/examples/module: When built in the PROTECTED or KERNEL modes, - the symbol table is not built by the application. That is because - the build will fail since the kernel module depends on internal OS - symbols thar are not available to the application build. With this - change the examples does not attempt to build the kernel symbol table - in these modes. Instead it just copies the kernel module symbol - table into the nuttx/pass1 directory where it can be build directly - into the OS during pass2 of the build. From Gregory Nutt (2018-08-07). - * nsh: add inverted logic support in the form of 'if ! ' From - Beat Küng (2018-08-11). - * apps/nshlib: I was able to cause an assertion with some typos in - testing the 'fi' command. Not an important thing, but this will - protect against the assertion. From Gregory Nutt (2018-08-11). - * examples/calib_udelay: Add tool for calibrating - CONFIG_BOARD_LOOPSPERMSEC From Juha Niskanen (2018-08-14). - * apps/builtin/Makefile. This commit changes apps/builtin to search - the registry recursively. By supporting directories, external - projects can install the hooks into the registry and easily clean - them up and reinstall if something needs to be updated. Based on an - idea from Anthony Merlino. From Gregory Nutt (2018-08-15). - * apps/system/popen: Add an implementation of the standard popen() and - pclose() OS interfaces. These are implemented as applications vs. - part of the OS because they depend on NSH. Untested on initial - commit. From Gregory Nutt (2018-08-17). - * apps/examples/popen: Add a test of popen/pclose. - apps/system/popen: Fix some errors found using the new popen/pclose - test. From Gregory Nutt (2018-08-17). - * apps/Application.mk: If a loadable module is generated the we need - to add logic to remove the loadable module in the 'make clean' - logic. From Gregory Nutt (2018-08-17). - * apps/system/system and popen: Adapt so that these can be used in the - KERNEL build mode. In this case, simply replace task_spawn() with - posix_spawn(). This depends on the existence of some environment - where /bin/sh exists and can be used to execute one NSH command. For - the case of system(), this change was more complete because it - previously used task_create(). Now it uses either task_spawn() or - posix_spawn(), depending upon the configuration. From Gregory Nutt - (2018-08-18). - * apps/system/nsh: Move apps/examples/nsh to apps/system/nsh. It has - become so entrenched that it is hardly an example these days. May as - well formalized it as a system task. From Gregory Nutt (2018-08-18). - * i8sak: i8sak daemon now gets shutdown if not in use. Previously, once - the i8sak daemon was started, by running any command, it would stay - running. This means that if you want to use i8sak to setup your - network, but then want exclusive access to the char device, or - network device, you have to manually shutdown the i8sak daemon. Now - the daemon stays active as long as required to finish any commands, - or stays open if a new command keeps it on, but when all work is - finished, it shuts down. From Anthony Merlino (2018-08-19). - * Remove illegal calls into OS to initialize BINFMT support. This must - be moved to the board initialization logic within the OS. From - anchao (2018-08-22). - * Move a copy of define.bat and sh from nuttx/tools to apps/tools so - that they will be available for the import build. From Gregory Nutt - (2018-08-22). - * apps/nshlib: Expand reboot and poweroff commands to include a - second, optional mode argument From ligd (2018-08-22). - * apps/system/zmodem: - fix error "sz_main.o: No such file or directory" - support -p for rz to change the folder for the received file - switch debug output from printf to syslog - send the next packet for ZME_ACK in ZMS_SENDING to avoid rz on the - host side stuck - make send work reliable even without hardware flow control From - Xiang Xiao (2018-08-23). - * apps/system/system/system.c: Add 'const' to make function signature - compatible with OpenGroup.org From Xiang Xiao (2018-08-23). - * apps/system/ping and ping6: Send ID and seqno in network byte - order. From Xiang Xiao (2018-08-23). - * apps/system/ping and ping6: Change dependency in ping and ping6 - Kconfig. These may be implemented in users sockets and, hence, may - need to be available even if ICMP and ICMPv6 sockets are not support. - From Xiang Xiao (2018-08-23). - * apps/system/cu/cu_main.c: (1) Protect from possible re-definition of - signal values, (2) Fix CU ctrl-C hand when remote core hang. From - ligd (2018-08-23). - * apps/fsutils/mksmartfs: Add a check to see if the SmartFS is already - formatted. apps/nshlib: Add a force flag (-f) to mksmartfs. SmartFS - will be formatted only if (1) the FLASH does not already hold - a SmartFS, or (2) the force flag is set From Xiang Xiao (2018-08-23). - * apps/nshlib: (1) NSH prompt string is now configurable. nsh> is still - the default. (2) Increase the default configuration for the maximum - number of command line arguments to 7 (CONFIG_NSH_MAXARGUMENTS). - This is needed for 'mount' with the -o option. From Xiang Xiao - (2018-08-23). - * apps/examples/module/Makefile: Correct module example build. Change - to LDLIBs were causing a failure due to a non-existent (any - unnecessary) library in this case. From Gregory Nutt (2018-08-23). - * apps/, most main() function: Correct CONFIG_BUILD_LOADABLE usage - Loadable apps/: Correct loadable symbol table generate - apps/system/ubloxmodem: Fix build break - apps/examples/ostest: start restart/waitpid/user test from main loop - apps/nshlib: Expand reboot and poweroff commands to include a - second, optional mode argument - An attempt to fix build issues. Does not work. - apps/examples/ostest: Fix some inappropriate renaming of static - functions introduced with recent patches. - apps/builtin/exec_builtin.c: Fix a error introduced by recent - comments. Found in build testing. - apps/builtin/exec_builtin.c: Try posix_spawn if builtin apps do not - have have an entry point. - apps/Application.mk: introduce MODULE config to simplify tristate(m) - apps/nsh: Change the nuttx shell module type to tristate - apps: Add loadable application support - script/mksymtab: Generate symbol table name by default - apps/builtin: Allow loadable applications can register with - apps/builtin. From anchao (2018-08-23). - * Replace all ASSERT calls to DEBUGASSERT From Xiang Xiao (2018-08-24). - * apps/examples/sotest and modules: With recent changes, LDLIBS is - initialized to bad value, at least in certain contexts. From Gregory - Nutt (2018-08-24). - * apps/nshlib: Add control-C support for terminating built-in and - exec'ed file tasks. From ligd (2018-08-26). - * apps/nshlib/Kconfig: Move 'option modules' from NSH_FILE_APPS to - BUILD_LOADABLE From anchao (2018-08-27). - * apps/system/nxplayer: Release buffer before session and release - semaphore in nxplayer_setvolume - system/nxplayer/nxplayer.c: Remove & for apb->samp reference. It is - already a pointer. From Xiang Xiao (2018-08-27). - * system/nxplayer/nxplayer.c: Add playraw command From ZhongAn - (2018-08-27). - * apps/system/nxrecorder: Add nxrecorder application From ZhongAn - (2018-08-27). - * nettest: fix typo: NET_LOOPBACK -> CONFIG_NET_LOOPBACK - nettest: fix compilation error. Should enable NET_SETSOCKOPT for - preventing compilation error. From EunBong Song (2018-08-28). - * apps/system/cu: SIGKILL is more appropriate that SIGINT in this - circustance. From Gregory Nutt (2018-08-28). - * apps/: Call BOARDIOC_FINALINIT after start-up script (or immediately - after BOARIOC_INIT is there is no start-up script). From ligd - (2018-08-28). - * apps/system/cu: Fix undefined SIGKILL if CONFIG_SIG_DEFUALT is not - defined. From Gregory Nutt (2018-08-29). - * apps/nshlib/nsh_console.c: Do not dereference NULL 'pstate' From - Juha Niskanen (2018-08-29). - * apps/system/i2c: Allow registers besides 0x00 in the dev command. - From akob Haufe (2018-08-30). - * system/i2c/i2c_main.c: Fix a backward comparison. Noted by Jakob - Haufe. From Gregory Nutt (2018-08-30). - * apps/ostest/suspend.c: Add a small test for SIGSTOP, SIGCONT, and - SIGKILL actions. From Gregory Nutt (2018-08-30). - * examples/ostest/signest.c: Attempt to make the nested signal test - compatible with the suspend/resume test. Some signals cannot be - caught when the suspend/resume configuration is in place. From - Gregory Nutt (2018-08-30). - * apps/ examples/dhtxx: Example for the DHTxx sensor. From Ouss4 - (2018-09-01). - * apps/nshlib: When using waitpid() to wait for a built-in application - or a file application to exit. Add the WUNTRACED options to so the - the waitpid() call will also be awakened if the waited-for task is - stopped as well. From Gregory Nutt (2018-09-02). - * apps/: Modification to build system: Unified application compilation - rules From anchao (2018-09-03). - * apps/: Resolve some make dependency failures. From anchao - (2018-09-03). - * apps/platform/Makefile: Fix missing dependency path in Makefile. - From Gregory Nutt (2018-09-03). - * apps/: Fix build break in case sama5d4-ek/elf configuration. Also - fix a patch problem in mkromfsimg.h. From anchao (2018-09-04). - * Application.mk: Even on Cygwin, GNU make insists that targets use - Unix style paths. System/progmem: Rename the install application to - progmem. This generates a target install: which collides with the - install:: target in Application.mk. From Gregory Nutt (2018-09-04). - * Makefile: platform/Makefile must have BIN_DIR defined on command - line even though it is not used. This is because in the Cygwin - build, the value of 'BIN_DIR' is passed to 'cygpath'. 'cygpath will - fail if BIN_DIR is not defined. From Gregory Nutt (2018-09-04). - * Makefile: Fix more places where attempts to use Unix-style paths - with native Windows toolchain. tools/mksymtab.sh: Add a check just - to prevent 'cat' of an empty file list from failing. Right not the - root problem is that the are not executables being built or installed - in the exe/ directory. That needs to be done by 'make import' but is - not happening. From Gregory Nutt (2018-09-04). - * Makefile: In the make import target for kernel build, we must make - all objects and populate libapps.a. Application.mk: the PROGIST - must be executed unconditionally to support the kernel build. From - Gregory Nutt (2018-09-04). - * Application.mk: Fix some issues when building directories such as - fsutils/mkfatfs that have no mainobj. In this case, the MAINSRC is - undefined and it would generate a bad linker command line. From - Gregory Nutt (2018-09-04). - * Application.mk: Add module install logic. Possibly only needed in - KERNEL build mode? Makefile: Simplify import target for KERNEL - build. A symbol table is not needed because the KERNEL-mode programs - are completely linked. Also fix missing deletion in clean and - distclean targets. tools/mksymtab.sh: Fix a typo introduced in - previous commit. From Gregory Nutt (2018-09-04). - * Makefile: 'make distclean' should remove the exe subdirectory That - target must return the directory back to the state is was in when - freshly cloned. Application.mk: Add logic to strip unnecessary - symbols after installing a module. But then I commented it out. - Wouldn't we want to keep the symbols if we planned to debug the - module? In apps/examples/elf, there is configuration option to - determine if the symbols should be stripped or not. Perhaps that is - needed here too? From Gregory Nutt (2018-09-04). - * Application.mk: Generate temporary name for linker object From - anchao (2018-09-05). - * netutils/ping: remove unsupported ping. netutils/ping is not - supported anymore. It's better to remove this folder for preventing - confusing. ping is supported by system/ping. From EunBong Song (2018-09-05). - * Application.mk: Fix to not register a builtin app when BUILD_MODULE=y - apps/tools: Fix to generate CONFIG_SYSTEM_NSH_SYMTAB_COUNTNAME in - mksymtab.sh. From Masayuki Ishikawa (2018-09-07) - -7.27 2018-11-14 Gregory Nutt - - * Directory.mk: Fix distclean targets of directory makefiles was not - removing generated Kconfig files. There is then no way to remove this - Kconfig files without manually deleting them one at a time. From Gregory - Nutt (2018-09-08). - * apps/examples/tcpblaster: Add an option to use poll() to pace input or - output. From Gregory Nutt (2018-09-10). - * apps/examples/tcpblaster: Select CONFIG_LIBC_FLOATINGPOINT - automatically. Units in output are wrong: Not Kbps bus Kb/Sec. From - Gregory Nutt (2018-09-10). - * apps/Application.mk: Fix some build issues. (1) Unable to found target - 'context' when CONFIG_NSH_BUILTIN_APPS disabled. (2) Unable to generate - multiple programs. From Chao An (2018-09-12). - * Fixes i8sak name. Accidentally renamed to i8ask in recent changes From - Anthony Merlino (2018-09-12). - * apps/examples/udpblaster: Add option to use poll() on output (only). - Also picks up some fixes to various typographical errors. From Gregory - Nutt (2018-09-14). - * Correct some network-related configuration variable names. All *_MTU - defines were changes to *_PKTSIZE gut that was not reflected in apps/ - From Gregory Nutt (2018-09-14). - * Combine the NxWidgets repository into the apps/ repository: - - - Remove old NxWidgets directory - - Merge remote-tracking branch 'NxWidgets/master' - - Move NxWidgets files into graphics/NxWidgets - - Integrate configuration/build system - - Fix file paths in file headers. Remove some duplicate tools. - - Add new NxWidgets Unit Test configuration and build logic. - - From Gregory Nutt (2018-09-15). - * Directory.mk: If the current directory contains a Kconfig file and - MENUDESC is not defined, then Directory.mk must not trash the Kconfig in - the current directory. From Gregory Nutt (2018-09-16). - * This commit moves the NxWidgets include directories into the correct - position in the apps/ source tree. - - - Clean-up some include path problems introduced with the previous set of - changes. - - app/include/graphics, apps/NxWidgets/UnitTests: Update include paths - for file in new location. - - apps/NxWidgets/nxwidgets and nxwm: Update include paths for file in new - location. - - apps/graphics/NxWidgets: Move nxwidgets and nxwm include/ directories - to apps/include/graphics - - From Gregory Nutt (2018-09-16). - * apps/nshlib: Correct maximum number of arguments that can be provided to - the mksmartfs command. From Eunbong Song (2018-09-18). - * apps/examples/adc/Kconfig: CONFIG_BOARDCTL_ADCTEST does not exist anymore - and should removed as a dependency. From Eunbong Song (2018-09-18). - * nshlib/, examples/: Update to show newer file system object types - returned by stat(). From Gregory Nutt (2018-09-22). - * Adapt the existing fstest example for SPIFFS: - - - examples/fstest: For SPIFFS, add garbage collection and file system - integrity IOCTL calls. This was to avoid running out of FLASH space - while running the fstest (ENOSPC=28). However, it does not work.. still - runs out of memory. - - apps/examples/fstest: Call statfs() and show state of file system on - each loop. - - apps/examples/fstest: Fix a situation where a file system under test - could cause the fstest to get stuck in an infinite loop. From Gregory - Nutt (2018-09-27). - * - apps/examples/fstest: Add logic to dump logic content of SPIFFS - - apps/examples/fstest/Kconfig: SPIFFS GC and integrity check option - interferes SPIFFS. Appears to corrupt the file system. Now marked - EXPERIMENTAL. From Gregory Nutt (2018-09-28). - * - apps/examples/fstest: Ignore EINTR errors while reading or writing. - - apps/examples/fstest: Add configuration option to customize stack - size. Detect when the media is full and stop writing files. Report - total file size. From Gregory Nutt (2018-09-29). - * apps/netutils/netlib/netlib_parsehttpurl.c: Correct handling of long URLs - as noted in Bitbucket issue #119 (in the nuttx/ repository, not the apps/ - repository). From Gregory Nutt (2018-09-30). - * apps/nshlib: Add support for the 'env' command. From Gregory Nutt - (2018-09-30). - * apps/nshlib: Add support for NSH local variables if CONFIG_NSH_VARS are - set. These are like environment variables but are local to NSH. The - importance of this is that these variables are *not* inherited when NSH - creates a new task. The new command 'export' was added. In this case, - the NSH variable will be promoted to an environment variable and will then - be inherited by any tasks executed by NSH. From Gregory Nutt (2018-10-01). - * apps/nshlib: If CONFIG_NSH_VARS=y, the NSH 'set' command with no argument - will list all of the local NSH variables. From Gregory Nutt (2018-10-02). - * i8sak: Properly shuts down event thread. From Anthony Merlino (2018-10-06). - * "dst" overflow protection when base64 string ends with "=" From Aleksandr - Vyhovanec (2018-10-19). - * apps/system/progmem: Remove this utility. It makes illegal direct calls - into the OS. From Gregory Nutt (2018-10-19). - * apps/examples/mlx90614: Add mlx90614 test example From Alan Carvalho de - Assis (2018-10-28). - * apps/netutils/netlib and apps/examples/igmp: Adapt to use the corrected, - semi-standard version of struct ip_msfilter. From Gregory Nutt - (2018-10-29). - * wireless/ieee802154/i8sak: Adds support for getting/setting transmit - power. From Anthony Merlino (2018-11-01). - * examples/mlx90614/mlx90614_main.c: Include support to change device - address on mlx90614 From Alan Carvalho de Assis (2018-11-02). - * apps/include/netutils/ipmsfilter.h: Eliminate error generated by bad - pre-processor logic. From Gregory Nutt (2018-11-02). - * apps/examples/mld: Add a test of MLD. Provides a mechanism for some - low-level bring-up of MLD. From Gregory Nutt (2018-11-04). - * apps/Makefile: Fix Windows native build patch extension. From Anatol - Ivanov (2018-11-05). - * apps/examples/ina226: Added INA226 example From Daniel P. Carvalho - (2018-11-05). - * apps/examples/mld/mld_main.c: Improve test by periodically dumping the - content of /proc/net/mld (if available). From Gregory Nutt (2018-11-06). - * apps/examples/mld: Add logic to set up the routing table before - attempting to send the multicast packet. From Gregory Nutt (2018-11-07). - * nshlib/nsh_console.c: Add fflush to nsh_consolewrite(). This resolves - this problem: - - > cat /dev/ttyCP & - > echo ls >/dev/ttyCP - - Can't get the 'ls' result immediately, because 'cat' cmd uses - nsh_consolewrite() and that uses fwrite with no fflush. We can get the - 'ls' result after type '\n', because nsh will fflush output when get - '\n'. From ligd (2018-11-07). - * nshlib/nsh_fsutils.c: nsh_catfile() should not append '\n' if the last - char in file is already '\n' From Xiang Xiao (2018-11-07). - * nshlib/nsh_netinit.c: Move call netlib_icmpv6_autoconfiguration() into - nsh_net_bringup() like DHCP From Xiang Xiao (2018-11-07). - * nshlib/nsh_envcmds.c: Fix warning g_oldpwd defined but not used - [-Wunused-const-variable] From Xiang Xiao (2018-11-07). - * apps/system/hexed/src/bfile.c: Fix memory leak From zhuyanlin - (2018-11-07). - * apps/system/i2c/i2c_get.c: Fix i2c_msg freq initialization problem. Typo - prevent I2C frequency initialization in a struct i2c_msg. From From: - dongjiuzhu (2018-11-07). - * apps/system/system.c: Fix warning when passing argument 6 of 'task_spawn' - from incompatible pointer type [-Wincompatible-pointer-types] From Xiang - Xiao (2018-11-07). - * apps/system/vi/vi.c: Do not print error if the file does not exist. From - anchao (2018-11-07). - * apps/netutils/chat and apps/examples/chat: 'constify' chat variables and - parameters From Xiang Xiao (2018-11-07). - * apps/netutils/pppd: Refine and fix pppd code. From Xiang Xiao - (2018-11-07). - * apps/examples/mld: Fix incorrect format of IPv6 Multicast address. This - resolves the UDP sendto() problem. From Gregory Nutt (2018-11-07). - * apps/: Rename BINFMT_EXEPATH to LIB_ENVPATH. From anchao (2018-11-08). - * apps/examples/gpio: Align with GPIO driver update From wangyanjiong - (2018-11-08). - * - system/ping/ping.c and system/ping6/ping6.c: Set optind to zero in the - error case - - system/ping/ping.c and system/ping6/ping6.c: Move all ping preparation - work into icmp_ping - - system/ping/ping.c and system/ping6/ping6.c: Support -W and - -s option - - system/ping/ping.c and system/ping6/ping6.c: Decouple the output from - ping logic - - From Xiang Xiao (2018-11-08). - * apps/system/ping and pings and apps/netutils/ping: Extract icmp ping and - icmpv6 ping6 logic from system/ to C-callable library in netutils/. From - ligd (2018-11-08). - * apps/examples/webserver/Kconfig: The webserver "app" allows for DHCP - client to be enabled. However, the Kconfig infrastructure does not contain - EXAMPLES_WEBSERVER_DHCPC config. - - Based on patch from "Anonymous" attached to Bitbucket Issue #130 From - Gregory Nutt (2018-11-08). - * NxWidgets improvements - - - NxWidgets: fix garbage returned when CCycleButton::getValue() is called - after removeAllOptions(). - - It's a bit questionable whether returning 0 here is reasonable or - if it would be better to assert(). But either is better than reading - into random memory and returning a garbage value. - - - NXWidgets CScrollingPanel: Don't draw outside the widget area. - - The port->move() function doesn't support clipping the - copied area to the client area, so we have to manually - calculate the part that can be moved without going outside - the widget. - - - CNxString: Add string + operator and ::format() function - - - CNumericEdit: Add option to include unit name after the value - - - NxWidgets: CNxWidget: Make useWidgetStyle() public - - Makes it easier to update styles when multiple controls are nested. - - - NxWidgets: Add CLabelGrid control for displaying text in grid format. - - From Petteri Aimonen (2018-11-09). - * apps/system/ping6: Remove NET_USRSOCK from Kconfig dependence list From - Xiang Xiao (2018-11-09). - * graphics/NxWidgets/nxwidgets/src/clabelgrid.cxx: Change old-style dbg() - to current ginfo(). From Gregory Nutt (2018-11-09). - -7.28 2019-01-19 Gregory Nutt - - * netutils/webserver: The webserver/httpd app is currently broken when script - support is enabled (CONFIG_NETUTILS_HTTPD_SCRIPT_DISABLE). The root cause - has been tracked down to the "Content-length" not being available ahead of - time in this case (length of -1 passed to send_headers() ). On the other - hand, the server closing the socket does not result in FIN being sent - to the browser either (FIN not supported by NuttX yet). - - Simple solution: Add support for HTTP Chunked Encoding to - webserver/httpd (attached patch). - - The attached patch is simple. It adds a configuration option to enable - chunked encoding. When enabled, the implementation will auto-detect the - cases where content length is not available ahead of time, and will - automatically engage chunked encoding transfers. - - Without this patch, the browser/client hangs forever, as it is - expecting more data. With this patch, the browser displays the - content. From Vlado Vidovic (2018-11-23). - * From patch attached to nuttx/ Bitbucket Issue #136 from Vlado Vidovic: - - The patch provided in issue 135, which adds support for HTTP Chunked - Encoding, covers all paths in the webserver app except CGI callbacks. - As a result, if a page being served happens to use CGI, it could - generate stream content that does not comply with HTTP Chunked Encoding. - - The patch attached amends the webserver app's CGI callbacks to use the - HTTP Chunked Encoding sender function instead of using send() - directly. From Gregory Nutt (2018-11-23). - * apps/system/critmon: Add a daemon to monitor critical section usage. - From Gregory Nutt (2018-11-24). - * apps/wireless/bluetooth/btsak: 'bt bnep0 info' outputs a reversed addr. - It should print BDAddr: aa:bb:cc:dd:ee:ff instead of BDAddr: - ff:ee:dd:cc:bb:aa From Lwazi (2018-11-25). - * Various initialization functions in configs/: Change /dev/slcd to - /dev/slcd0 for consistency From Alan Carvalho de Assis (2018-11-25). - * wireless/bluetooth/btsak: Fix some errors in btsak From Lwazi Dube - (2018-11-27). - * system: Fixes build error; There is no result variable, use errcode - instead. From Anthony Merlino (2018-11-28). - * apps/system/critmon/Makefile: Stack size and priority reversed. From - Daniel Pereira Carvalho (2018-11-29). - * apps/nshlib: Add support to use SLCD as NSH Console From Alan Carvalho - de Assis (2018-11-29). - * wireless/bluetooth/btsak/btsak_main.c: Fix address parsing From Lwazi - Dube (2018-11-30). - * apps/wireless/bluetooth/btsak: Add connect and disconnect commands to - btsak From Lwazi Dube (2018-12-02). - * apps/nshlib/nsh_romfsetc.c: Add support for CROMFS start-up script. - From David Sidrane (2018-12-06). - * apps/wireless/bluetooth/btsak: Remove unnecessary gatt get commands. - From Lwazi Dube (2018-12-08). - * apps/testing: Move apps/examples/ostest to apps/testing/ostest. From - Gregory Nutt (2018-12-12). - * apps/wireless/bluetooth/btsak/btsak_scan.c: Fix reversed address From - Lwazi Dube (2018-12-17). - * apps/system/nsh/nsh_main.c: Set NSH priorirty if the NSH task was - scheduled at a different priority than the configured priority. From - Gregory Nutt (2018-12-20). - * apps/system/configdata: Adds an "cfgdata" command which allows - manipulation of the /dev/config items via the command line. One such - use for this utility would be to set a "macaddr" configdata item, etc. - The utility is sort-of like a u-boot env variable edit function: - - For instance, to set a "macaddr" when the new CONFIG_MTD_CONFIG_NAMED - option is selected, you would do: - - nsh> cfgdata set macaddr [0xfc 0x01 0x0b 0x45 0xa1 0x12] - (The brackets denotes an array of bytes) - nsh> cfgdata set hostname myboard - - or using the old ID,INSTANCE numeric method: - - nsh> cfgdata set 0,0 [0xfc 0x01 0x0b 0x45 0xa1 0x12] - (The brackets denotes an array of bytes) - nsh> cfgdata set 1,0 myboard - - You can also display all config items: - - nsh> cfgdata print all - Name Len Data - macaddr 6 0xFC 0x01 0x0B 0x45 0xA1 0x12 - hostname 8 myboard - - From Ken Pettit (2018-12-20). - * apps/examples/smp: Add dependency on SMP in Kconfig From Masayuki - Ishikawa (2018-12-25). - * apps/testing/ostest: Add test for pthread-specific data. From Gregory - Nutt (2018-12-28). - * apps/examples/battery: Add Battery Charger Monitor Example From Alan - Carvalho de Assis (2019-01-04). - * apps/system/termcurses: Addition of termcurses libraries in - apps/system/termcurses From Ken Pettit (2019-01-05). - * apps/graphics/pdcurs34: Integration of termcurses into pdcurses, plus - pdcurses updates for multi-thread support From Ken Pettit (2019-01-05). - * [WIP] nshlib add var expansion in nsh parse From Daniel Agar - (2019-01-06). - * apps/system/nxplayer: Introduce CONFIG_NXPLAYER_MAINTHREAD_STACKSIZE - From Masayuki Ishikawa (2019-01-07). - * apps/graphics/pdcurs34/nuttx and system/termcurses: This commit fixes - two issues: - 1. A memory corruption issue that occurs from a paste operation that - would overflow the fixed buffer size for keyboard processing. - 2. A stall in getch() processing when there are cached keycodes in the - termcurses emulation (tcurses_vt100.c) - From Ken Pettit (2019-01-08). - * graphics/pdcurs34: This commit adds a configuration option to pdcurses - to enable line-drawing character (ALTCHARSET) when using the short - 16-bit chtype. This is done by limiting the characters to 7-bit ASCII - values and using the 8-th bit as the A_ALTCHARSET bit. This allows a - significant RAM savings 4K - 20K depending on terminal size) while - still allowing the nicer line-graphic characters for border drawing. - From Ken Pettit (2019-01-08). - * apps/nshlib/nsh_command.c: display built-in apps using multi-column - mode like the nsh commands From Ken Pettit (2019-01-11). - * apps/system/termcurses/tcurses_vt100.c: Fix an issue where the first - curses 'getch()' call sometimes (usually) hangs waiting for a keypress. - This bug was introduced when I fixed the keyboard 'paste' overflow - error. From Ken Pettit (2019-01-11). - * apps/nshlib/nsh_command.c: In all multi-column help output, calculate - an optimal column width rather than using a hard-coded width that may - or may not be appropriate. Also make the number of rows presented - dependent upon the maximum width of the widest column. From Gregory - Nutt (2019-01-11). - * apps/nshlib/nsh_parse.c: Fixes an error in the NSH parser. There was - a bug when executing an nsh shell script which contains a redirection. - When the command in the script is executed, it sets the - vtbl->np.np_redirect flag (as it should), but then doesn't restore it, - leaving it set at the end of the script execution. Then the - vtbl->np.np_redirect flag is set when the 'sh' command completes, - causing a restore from un-initialized variables, thus leading to a - crash. See the code snippet below for an example test case. - - Test case: - - NuttShell (NSH) - nsh> mkrd -s 1024 40 - nsh> mkfatfs /dev/ram0 - nsh> mount -t vfat /dev/ram0 /tmp - nsh> echo "echo 1 > /dev/null" > /tmp/test.sh - nsh> cat /tmp/test.sh - echo 1 > /dev/null - nsh> sh /tmp/test.sh - ... - - The nsh prompt doesn't get printed. You can type a couple of commands, - but then the system will crash because of bad pointers. From Ken - Pettit (2019-01-12). - * wireless/ieee802154/i8sak: Fixes issues related to re-running daemon. - Releases lock when releasing daemon. Re-sets daemon_shutdown so that a - subsequent daemon launch does not immediately return. From Anthony - Merlino (2019-01-13). - * NSH addroute: Adds command for setting default gateway. addroute - default From Anthony Merlino (2019-01-13). - * apps/system/termcurses: Perform a bounds check to fix a random - Termcurses crash that I haven't been able to track down. The result of - of the subtraction for priv->keycount should never be negative, but I - think sometimes it is, so better to catch it and avoid a crash until I - can track it down. From Ken Pettit ? (2019-01-16). - * apps/system/vi: - - Bug fixes and changes to existing functionality - - 1. Deletion of last line in file using 'dd' caused infinite loop - searching for 'nextline'. Fixed. - 2. Insertion of line above 1st line using 'O' caused line to be - inserted on 2nd line. Fixed. - 3. Paste buffer from 'dd' was being free'd after the 'p'aste operation, - preventing multiple paste opportunity. Fixed. - 4. The cursor was not being bound to the line end and was allowed to - 'hover' over the '\n' EOL character. This caused weird (relative to - standard vi) insertion locations and cursor movement with 'a'ppend - and 'i'nsert. Fixed. - 5. The 'vi_shrinkpos' position didn't take the end of file pointer into - account when calculating 'curpos', 'prevpos' variables causing - weirdness when deleting things near the end of the file. Fixed. - 6. The 'yy'ank command was improperly deleting the text from the - document instead of simply yanking to the paste buffer. Fixed. - 7. The 'dd'elete line function was not copying the deleted line to the - paste buffer as part of the delete operation. Fixed. - 8. The bottom line of the screen was sometimes being used for document - text and other times for command / find entry. Fixed by reserving - the bottom the bottom line for status / command only. - 9. When scrolling up / down through a file, the cursor position was not - preserved and moved further and further to the left column based on - the line lengths of the lines visited. Fixed. - 10. The display was being COMPLETELY redrawn with each keystroke, - causing the responsiveness to be unbearable. Fixed. Added logic - to dynamicall indicated which portions of the screen need to be - updated (full display, current line to end of screen, current line - only, none). - 11. The individual display line updates were being performed a - character at a time by calling the vi_putch() function, causing slow - performance, especially in telnet or USBCDC sessions where there is - a lot of overhead per packet. Fixed by calling vi_write() instead - with a block of characters with breaks as needed for TAB exansion. - 12. The forward delete 'x' operation allowed deletion through '\n' - characters causing lines to be joined. This is different from - standard vi where 'x' at the end of a line performs a delete - backward operation. Fixed. - 13. When in 'ex' or find sub-modes (':' or '/' bottom line modes), - hitting backspace with empty text did not return the operation to - command mode like it does in standard vi. Fixed. - 14. Performing a 'find' opertation would only search from the current - cursor position to the end of the file and did not wrap like in - standard vi. Fixed. - 15. Loading a file that was larger than the initial text allocation - would force a call to 'vi_extendtext', marking the file as modified - when in fact it hadn't even been loaded yet. Fixed. - 16. Combined vi_insert_mode and vi_replace_mode into a single function - to save code space since they are nearly identical routines. - 17. In command mode, backspace was deleting characters which is different - from standard vi. Backspace in command mode normally simply moves - the cursor left / to the previous line. Fixed. - 18. Added code to handle boundary conditions when the file is new and - commands are applied to an empty file. - 19. Fixed vi_shrinktext so it doesn't allocate a zero-length buffer when - the last character in the file is deleted. - 20. The 'x' command was not copying to the paste buffer. Fixed. - 21. Fixed parsecolon routine to properly deal with ":wq" command - sequence. - - New feature additions - - 1. Vi startup feature to prepend the current working directory to the - supplied filename if it does not start with '/' absolute path - specifier. This allows editing files in the current directory - without needing to fully qualify the filename. - 2. Standard '~' empty screen line characters for proper identification - of empty '\n' only lines at the end of the file. - 3. Moving into insert or append mode now prints '--INSERT--' in the - status line and clears it upon exit. - 4. Integration with termcurses to detect special keystrokes and to - handle terminal type differences. Haven't yet converted all vt100 - print codes to termcurses equivalents. - 5. Support for up, down, left, right arrows, page-up, page-down keys - in command mode. - 6. Added 'b' command to move cursor 'b'ack to previous word. Honors - the command repeat value for multiple word moves. - 7. Added 'w' command to move cursor to next 'w'ord. Honors the command - repeat value for multiple word moves. - 8. Added 'f' and 't' commands to find characters on the current line. - Honors the command repeat value. - 9. Added the find 'n'ext command to repeat the previous find operation. - 10. Added the 'H', 'M', and 'L' commands to move the cursor to top, - middle and bottom of the display. - 11. Extended yank/paste to manage a paste buffer with character mode in - addition to line mode. Character mode allows cut / paste of - individual characters or groups of characters vs. full lines. - 12. Added support in the 'd'elete and 'y'ank commands for character mode - deletions such as 'dw', 'dfa', '2yw', etc. - 13. Added support in paste routine for multiple paste using command value - argument. - 14. Added support for the 'D' and 'C' delete and change to end of line - commands. - 15. Added support for 's'ubstitute key ('x' followed by insert mode). - 16. Modified yank / paste allocation scheme to avoid repeated alloc - and free of paste buffer. Uses a minimum allocation size scheme and - only does free / realloc when paste does not fit. If the paste is - smaller than the current allocation and the current allocation is - larger than the threshold, then the buffer is freed and a smaller - buffer allocated. Otherwise the existing buffer is used. - 17. Support for 'P'aste before current cursor position. - 18. Support for '?' reverse search mode. - 19. Support for 'J'oin next line with current line command. - 20. Printing of current row,col in status line of display. - 21. Command repeat '.' support for commands that modify text. - 22. Support in replace / insert mode for arrow keys, PGUP / PGDN, HOME, - and END. Using these will cause the command repeat buffer to - reset such that only the last text addition after a cursor movement - is saved. - 23. Added 'X' delete previous command. - 24. Added "gg" go to top of document command sequence. - 25. Added "ZZ" save and quit command (equivalent to :wq). - 26. Implemented '^' goto first non-whitespace on current line, along - with '+' and '-' goto first non-whitespace on next / previous line. - 27. Added CR / LF goto first non-whitespace on next line in command - mode. From Ken Pettit (2019-01-16). - * apps/nshlib: Fix buffer overrun when redirected to a file. SAVE_SIZE must - be the same as sizeof(struct serialsave_s). From Masayuki Ishikawa - (2019-01-19). - -7.29 2019-03-25 Gregory Nutt - - * apps/system/vi/vi.c: Fix an infinite loop bug that can show up in some - cases (plus a couple of other items). From Ken Pettit (2019-01-22). - * apps/system/cfgdata: Make builtin task stack size and priority - configurable. Set default to 2048 (from 1024) per recommendation of - Ken Pettit. From Gregory Nutt (2019-01-22). - * apps/testing/smp: Move apps/examples/smp to apps/testing/smp From - Gregory Nutt (2019-01-23). - * nshlib/nsh_console.h: Fix copy paste errors. Some Kconfig - configuration names needed CONFIG_ prefix. From David Sidrane - (2019-01-24). - * testing/: Move all file system tests from examples/ to testing/ - (fstest, nxffs, smart, smart_test). From Gregory Nutt (2019-01-24). - * testing/cxxtest: Move examples/cxxtest to testing. From Gregory Nutt - (2019-01-24). - * apps/system/zmodem: Switch to the raw mode before transfer and restore - to the original setting after finishing the transfer. From Xiang Xiao - (2019-01-27). - * apps/netutils/codecs/base64.c: Remove the big stack array From Xiang - Xiao (2019-01-27). - * netutils/codecs/base64.c: Add base64_[de|en]code_length() API From - ligd (2019-01-27). - * system/nxplayer/nxplayer.c: Fix build error when only enable - CONFIG_AUDIO_EXCLUDE_VOLUME is enabled. From ZhongAn (2019-01-27). - * apps/system/system/system.c: Correct a path name. From anchao - (2019-01-27). - * apps/testing/cxxtest: Add a README file. From Gregory Nutt - (2019-01-27). - * apps/tools/mksymtab.sh: 'export LC_ALL=C' to get the traditional sort - order From anchao (2019-01-27). - * Follow up the kernel signal-related change in: - - examples/oneshot/oneshot_main.c: - - examples/alarm/alarm_main.c: - - examples/ajoystick/ajoy_main.c - - examples/djoystick/djoy_main.c - - examples/buttons/buttons_main.c - - examples/zerocross/zerocross_main.c - - graphics/traveler/src/trv_input.c - - graphics/ft80x/ - From Xiang Xiao (2019-01-27). - * apps/nshlib/nsh_netinit.c: Update for changes to signal notification - structures. From Gregory Nutt (2019-01-27). - * graphics/NxWidgets/nxwm/src/ccalibration.cxx: Correct and error in the - type of the return value. From Gregory Nutt (2019-01-27). - * apps/modbus/Kconfig: Fix modbus master Kconfig. Modbus Master ASCII - compiles correctly From Alan Carvalho de Assis (2019-01-28). - * apps/netutils/dhcpc/dhcpc.c: Fix an error for DHCP REQUEST receiving a - NAK.In DHCP Request operation, no need to update ciaddr to the client - address and keep it as 0. From Kevin Liu (2019-01-30). - * apps/examples/modbusmaster: Add Simple Modbus master example. This - example only supports Read/Write HoldingRegisters, but it is easy to - extend it to support Read/Write Input/Coils/etc. Originally creatd bey - Vytautas in 2016 and updated with minor fixes for this commit. From - Alan Carvalho de Assis (2019-02-02). - * Update for corrected name of standard header file. Should be dlfcn.h, - not dllfcn.h. I am surprised no one ever noticed before now. From - Gregory Nutt (2019-02-09). - * The file system can no longer be disabled. Remove all conditional - logic based on CONFIG_NFILE_DESCRIPTORS==0 From Gregory Nutt - (2019-02-11). - * apps/: Remove/replace all conditional logic based on - CONFIG_NSOCKET_DESCRIPTORS == 0. That value is always greater than - zero now. In places just replace with #ifdef CONFIG_NET. From Gregory - Nutt (2019-02-11). - * apps/testing/scanftest: Port of Greg King's scanf test - (https://github.com/cc65). From Johannes (2019-02-14). - * apps/testing/scanftest/scanftest_main.c: Test improvements. From - Gregory Nutt (2019-02-14). - * testing/scanftest/scanftest_main.c: Initialized s3, changed Ok to - PASSED for Back to Back test. From Johannes (2019-02-15). - * configs/system/embedlog: Update to version 0.4.0. From Michal Lyszczek - (2019-02-15). - * app/examples/embedlog: This example program presents most useful - features of embedlog library and how to use them. From Michal Lyszczek - (2019-02-15). - * system/nxplayer and nxrecorder: Change 'int prio' to 'unsigned int prio'. - Required by changes to MQ function prototypes. From Michal Lyszczek - (2019-02-15). - * system/nxplayer and nxrecorder: Fix some coding standard violatins - that are just to in-yer-face to ignore: No CamelCase variable names. - This was not an extensive check for use of CamelCase. Just some I - stumbled across. From Gregory Nutt (2019-02-15). - * tools/check-hash.sh: Add a tool check hash on downloaded packages. - From Michal Lyszczek (2019-02-18). - * apps/fsutils/inih: New package. inih (INI Not Invented Here) is a - simple .INI file parser written in C. https://github.com/benhoyt/inih - From Michal Lyszczek (2019-02-18). - * apps/examples/ini_dumper: New example program. ini_dumper is example - program that dumps content of ini file in pretty ascii table. It is - using inih ini library in fsutils/inih. From Michal Lyszczek - (2019-02-18). - * Some updates due to NuttX renaming: CONFIG_BOARD_INITIALIZE is not - CONFIG_BOARD_LATE_INITIALIZE; board_initialize() is now - board_late_initialize(). From Gregory Nutt (2019-02-18). - * apps/system/psmq: New package. psmq is publish subscribe message - queue. It's a set of programs and libraries to implement - publish/subscribe way of inter-process communication on top of POSIX - message queue. From Michal Lyszczek (2019-02-18). - * apps/system/psmq/README.txt: Add a README.txt file. This is just a - copy of the description accompanying that patch that added - system/psmq. From Gregory Nutt (2019-02-18). - * pps/system/psmq/Kconfig: Fix recursive dependency. SYSTEM_PSMQ both - depended on and selected SYSTEM_EMBEDLOG From Michal Lyszczek - (2019-02-19). - * system/vi: Condition KEY_CMDMODE_REPEAT with - CONFIG_SYSTEM_VI_INCLUDE_COMMAND_REPEAT to avoid build error when - option is not selected. From Anthony Merlino (2019-02-23). - * apps//netutils/webclient/Kconfig: NET_SOCKOPTS is needed to get - webclient compiled. From Alan Carvalho de Assis (2019-02-24). - * apps/testing/ostest: Add test of pthread_mutex_timedlock() From - Gregory Nutt (2019-02-24). - * examples: Add sx127x demo From Mateuz Szafoni (2019-02-25). - * apps/system/taskset: Fix command arguments are not passed From - Masayuki Ishikawa (2019-02-25). - * testing/ostest/timedmutex.c: pthread_mutex_timedlock() returns - EDTIMEDOUT on a timedout, not eagain. From Gregory Nutt (2019-02-25). - * testing/ostest/setvbuf.c: Fix several errors in the setvbuf() test. - From Gregory Nutt (2019-02-25). - * apps/system/cu/Kconfig: CU term depends on TERMIOS and should select - it. From Alan Carvalho de Assis (2019-03-05). - * apps/examples/nxterm and graphics/NxWidgets/nxwm: Replace direct calls - to nxtk_register with legal, indirect calls via - boardctrl(BOARDIOC_NXTERM). Replace calls to (deleted) - nxterm_unregister(). The correc way to delete a driver is by - unlink'ing it. From Gregory Nutt (2019-03-06). - * apps/examples/nxterm: Most configuration options were not available in - the Kconfig file. From Gregory Nutt (2019-03-06). - * apps/examples/nxterm, graphics/NxWidgets: Replace illegal direct calls - to nxterm_redraw() and nxterm_kbdin() with new boardctl() calls. From - Gregory Nutt (2019-03-06). - * apps/examples/modbusmaster/mbmaster_main.c: eMBMasterRegHoldingCB - cannot be static. From Alan Carvalho de Assis (2019-03-07). - * apps/examples/sx127x_demo/Kconfig: Fix misplaced 'if' From Gregory - Nutt (2019-03-07). - * apps/examples/nxterm: NxWM passed the size of the NxTK sub-window but - nxterm example passed the size of the complete NxTK window. They must - be made consistent. From Gregory Nutt (2019-03-09). - * Missing semicolon at the end of function call. From Kejun ZHOU - (2019-03-11). - * graphics: nx_openwindow() and nxtk_openwindow() now accepts an - additional 'flag' parameter. This argument is not used at present but - will, eventually enable a RAM backed, per-window framebuffer. From - Gregory Nutt (2019-03-13). - * This commit adds a test example at apps/examples/pwfb that will be used - for testing the per-window framebuffer feature. The test does not work - correctly yet. From Gregory Nutt (2019-03-16). - * apps/examples/pwfb: Change b32_t's to b16_t's; don't need so much - precision. Some improvements to motion. Add VERBOSE debug output. - Still lots of bugs. From Gregory Nutt (2019-03-16). - * apps/examples/pwfb/pwfb_main.c: Temporarily work around a race - condition by adding a delay. From Gregory Nutt (2019-03-16). - * - apps/examples/pwfb: Solve a race condition by changing some relative - priorities. Also removes a delay kludge that used as a workaround. - - apps/examples/pwfb: Add rate control. Examples becomes unstable at - high update rates. - From Gregory Nutt (2019-03-17). - * nshlib/nsh_timcmds.c: Uninitialized struct tm caused 'date -s' to - fail. From Valmantas Palikša (2019-03-18). - * apps/examples/pwfb: Add a toolbar to the example windows. From - Gregory Nutt (2019-03-18). - * This commit adds apps/examples/pwlines, another test of the pw-window - framebuffer lgoic. From Gregory Nutt (2019-03-20). - -7.30 2019-05-19 Gregory Nutt - - * Add some awareness of overlays to apps/examples/fb From Matthew Koch - (2019-03-25). - * examples/, graphics/NxWidgets: Update NX window clients so that they - use the new 'event' callback (vs. the obsoleted 'blocked' callback). - From Gregory Nutt (2019-03-25). - * graphics/NxWidgets/nxwidgets/src/ccallback.cxx and - include/graphics/nxwidgets/: Add a synchronize method to every window. - This is a wrapper arounc nx[tk]_sync and permits C++ applications to - synchronize with the NX server. From Gregory Nutt (2019-03-27). - * Various graphics apps: If CONFIG_VNCSERVER=y, don't call - vnc_default_fbinitialize() directly. That is a violation of the portable - POSIX interface. Instead, call boardctl(BOARDIOC_VNC_START);. From - Gregory Nutt (2019-04-02). - * apps/system/nxplayer: Fix some logical errors from recent commits. They - broke the build of the nxplayer as a library vs. a task. - apps/graphics/nxglyphs: Fix yet more namespace problems. From Gregory - Nutt (2019-04-04). - * Separate nxwidgets and nxwm into separate directories. Remove old, - common NxWidgets directory. From Gregory Nutt (2019-04-04). - * apps/graphics/nxglyphs: Put all NxWidgets and NxWM glyphs into a common - directory where they can eventually be shared. Decouple (mostly) from - nxwidgets and nxwm so that they can be used elsewhere. Creates - include/graphics/nxglyphs.h From Gregory Nutt (2019-04-04). - * graphics/nxwm/src/nxwm_main.cxx: Move from - graphics/nxwidgets/UnitTests/nxwm/nxwm_main.cxx. It is no longer a unit - test, but the main startup entry point for NxWM. From Gregory Nutt - (2019-04-04). - * graphics/nxwidgets and inclu/graphics/nxwidgets: Add support for modal - windows. From Gregory Nutt (2019-04-05). - * apps/graphics/nxglyphs: Add some new cursor bitmap images. From Gregory - Nutt (2019-04-07). - * apps/nxglyphs/include: Add mkcursor.c. Will auto-generate cursor image - header file from Gimp C output. From Gregory Nutt (2019-04-07). - * apps/graphics/littlevgl. Update to Littlevgl 5.3. - apps/examples/lvgldemo. Update to Littlevgl 5.3 From Matthew Koch - (2019-04-08). - * apps/examples/pwfb: Extend example to verify software cursors. From - Gregory Nutt (2019-04-10). - * app/examples/pwfb: Add options to reduce the number of windows. This is - helpful during debug to reduce the complexity. From Gregory Nutt - (2019-04-10). - * graphics/nxglyphs: Update cursor images. Better to have clean, if - ragged cursor edges that weird color effects from anti-aliasing - attempts. From Gregory Nutt (2019-04-13). - * include/graphics/nxwidgets/cnxserver.hxx: Add Cursor methods to the - CNxServer class. From Gregory Nutt (2019-04-13). - * /apps/graphics/nxglyphs: Add 16x16 cursor images. 30x30 are kind of - large. From Gregory Nutt (2019-04-14). - * apps/system/nxplayer: Fix compile problems when audio debug is enabled. - From Gregory Nutt (2019-04-23). - * Twm4Nx is a port of twm, Tab Window Manager (or Tom's Window Manager) - version 1.0.10 to NuttX NX windows server. No, a port is not the right - word. It is a re-design of TWM from the inside out to work with the NuttX - NX server. The name Twm4Nx reflects this legacy. But Twm4Nx is more a - homage to TWM than a port of TWM. - - The original TWM was based on X11 which provides a rich set of features. - TWM provided titlebars, shaped windows, several forms of icon management, - user-defined macro functions, click-to-type and pointer-driven keyboard - focus, graphic contexts, and user-specified key and pointer button - bindings, etc. - - Twm4Nx, on the other hand is based on the NuttX NX server which provides - comparatively minimal support. Additional drawing support comes from - the NuttX NxWidgets library (which necessitated the change to C++). - - Twm4Nx is greatly stripped down and targeted on small embedded systems - with minimal resources. For example, no assumption is made about the - availability of a file system; no .twmrc file is used. Bitmaps are not - used (other than for fonts). - - The TWM license is, I believe compatible with the BSD license used by - NuttX. The origin TWM license required notice of copyrights within each - file and a full copy of the original license which you can find in the - COPYING file within this directory. - - STATUS: - - This port was brutal. Much TWM logic was removed because it depending on - X11 features (or just because I could not understand how to use it). The - logic is partial. A lot more needs to be done to have a complete system - (hence, it is marked EXPERIMENTAL). The kinds of things that need to - done are: - - 1. Update some logic that is only fragmentary for how like resizing, and - menus. - 2. Integrate NxWidgets into the windows: The resize menu needs a CLabel, - the menus are CListBox'es, but not completely integrated, the Icon - Manager needs to be a button array. - 3. Revist Icons. They are windows now, but need to be compound widgets - lying on the background. - 4. Widget events are only partially integrated. A lot more needs to be - done. A partial change to those event system that hints at the - redesign is in place but it is far from complete. From Gregory Nutt - (2019-04-25). - * graphics/twm4nx/src/cwindow.cxx: Finishes first cut at window event - management. Use CNXWidgets::CButtonArry for Icon manager. Implement - button event handling. From Gregory Nutt (2019-04-26). - * graphics/nxwidgets/src/cbuttonarray.cxx: Add a method to CButtonArray - that will allow us to dynamically resize the array (at the cost of losing - all button labels). From Gregory Nutt (2019-04-26). - * netutils/netlib/netlib_parseurl.c: Add a more flexible version of - netlib_parsehttpurl. This one can parse any URL, and is extensible so - future improvements keep the same API. From Sebastien Lorquet - (2019-04-26). - * apps/graphics/twm4nx: In order for widgets to draw the correct window or - toolbar, it is necessary to get the CWidgetControl instance from the - window we want to use, not to create a new instance. From Gregory Nutt - (2019-04-26). - * apps/graphics/twm4nx: Finish menu-related event handling. Extended menu - handling. Allow external application event handling using a new base - class (CTwm4NxEvent). From Gregory Nutt (2019-04-27). - * apps/graphics/twm4nx: Flesh out some of the Resize logic. Still missing - the pull events needed to do the resize. From Gregory Nutt (2019-04-27). - * apps/graphics/twm4nx: Add compound widget CIconWidget. This will - eventually replace the icon Windows with widgets that can be drawn on the - Background. From Gregory Nutt (2019-04-27). - * apps/examples/pca9635/pca9635_main.c: fix compilation From Mateusz - Szafoni (2019-04-28). - * apps/netutils: Support for the current version of cJSON From Mateusz - Szafoni (2019-04-28). - * apps/graphics/twm4nx: Remove Icon Windows; replace with IconWidgets that - are draw on the background. Add CIconWidget event generation. Add event - handling logic to CIconWidget. From Gregory Nutt (2019-04-28). - * apps/graphics/twm4nx: Suppress input thread if using the VNC server. We - don't need to catch input from keyboard or mouse devices in that case; - those inputs will be injected into NX directly by the VNC server. - Includes a couple of fixes from initial bring-up attempts. From Gregory - Nutt (2019-04-28). - * apps/netutils/netinit. This commit removes the private network - initialization logic from NSH and puts in a common location at - apps/netutils/netinit. Now that netork initialization logic can be used - by applications that do not include NSH. From Gregory Nutt (2019-04-29). - * apps/graphics/twm4nx: Add options to initialize the system via - boardctl() and to bring up the network using the new - apps/netutils/netinit. This latter is only necessary because VNC is - being used to provide graphics. From Gregory Nutt (2019-04-29). - * Many locations: Remove references to CONFIG_DISABLE_SIGNALS. Signals - can no longer be disabled. From Gregory Nutt (2019-04-29). - * apps/graphics/NxWidgets: Fix a possible deadlock condition when waiting - for window geometry data that will never come. Fixed by re-requesting - geometry data if we don't already have it. From Gregory Nutt (2019-05-01). - * apps/graphics/twm4nx: Revamp how background events are handled. From - Gregory Nutt (2019-05-01). - * include/graphics/nxwidgets/cwidgetcontrol.hxx: Add handshake to - getWindowHandle() to avoid returning a NULL handle. But now Twm4Nx hangs - waiting for the non-NULL handle, From Gregory Nutt (2019-05-01). - * apps/graphics/twm4nx: Fix various bugs found in bringup: Re-order - object instantiation to account for inter-object dependencies. Correct - mq_receive() buffer size. Fix a backward comparison. - - apps/graphics/twm4nx: Twm4Nx debug can now be separately enabled so that - it does not get overwhelmed by other graphics debug output. From Gregory - Nutt (2019-05-02). - * apps/graphic/twm4nx: Fix junk variable that was shadowing variable of - the same name in the base CNxWidget class. Resolves all start up crash - issues. Now I need to figure out why the host VNC client drops the - connection. From Gregory Nutt (2019-05-02). - * apps/netutils/libcurl4nx: This is an initial commit libcurl4nx. It is - not complete yet, but I still wish to commit the unfinished bits to - describe the roadmap, and because it is already usable. It will be - updated and fixed in the future weeks and months, certainly including - POST support and later, SSL. - - Some improvements could be made by anyone. For example, I know the main - routine in perform() shall be split into several parts for readability. I - apologize in advance for this kind of spaghetti code, but I was short on - time to refactor it. Also chunked HTTP transfer encoding would be a nice - contribution from anyone interested. It is detected but not yet - supported. From Sebastien Lorquet (2019-05-03). - * graphics/twm4nx/src/cbackground.cxx: Should set the initial background - color immediately without waiting for a redraw. From Gregory Nutt - (2019-05-04). - * graphics/twm4nx/Kconfig: Add configuration to disable keyboard/mouse - input for testing purposes. - - graphics/twm4nx/src/ciconmgr.cxx: Correct initial window size and - position in the upper right hand corner; Need to fill draw the button - array immediately on window creation. - - graphics/twm4nx/src/cwindow.cxx: Need to fill the toolbar initially - with the widget background color. - From Gregory Nutt (2019-05-04). - * apps/graphics/NxWidgets: CNxTkWindow, CNxWindow, CNxServer: Add support - to create RAM backed windows. From Gregory Nutt (2019-05-04). - * apps/graphics/twm4nx: IconMgr window now comes up correctly. Need to - revisit window width setup. All windows are now created as RAM backed - windows. From Gregory Nutt (2019-05-04). - * apps/graphics/twm4nx: Add option to use touchscreen instead of mouse - input. Add option to use the touchscreen with no keyboard. From Gregory - Nutt (2019-05-04). - * graphics/twm4nx/src/cbackground.cxx: Add logic to handle polling for - background icon events. - - graphics/twm4nx/src/window.cxx: Add flags to CWindow initializer to - support customization of toolbar buttons and other window properties. - Add framework to handle toolbar button presses. Window minimization - (aka, iconification) does not work. - - graphics/twm4nx/src/input.cxx: Add support to scaling touchscreen. Not - needed for the current testing because the touchscreen naturally matches - the display size. But will be needed, along with calibration screen, in - the future. From Gregory Nutt (2019-05-05). - * apps/graphics/twm4nx: Add logic to hide the window when it is iconified - and restore the window when it is de-iconfied. Iconification works, - de-iconification does not. From Gregory Nutt (2019-05-05). - * apps/graphics/twm4nx: Try to improve icon text spacing. Not noticeably - better, however. Split long icon title on two lines below the icon - image. Both iconification and de-iconification now work. From Gregory - Nutt (2019-05-06). - * apps/graphics/twm4nx: Add initial support for the main menu. The main - menu will come up when a left click is performed on the background. The - main menu is used for starting applications. The adds the CMainMenu - class that implements the main menu and an IApplication interface class - the provides th template for how any external C++ application can add - itself to the Main Menu. Still missing is the logic that responds to the - menu item selection and sends the event to the Main Menu as well as the - logic in the Main Menu that handles the event and either brings up a - sub-menu or starts and application. From Gregory Nutt (2019-05-06). - * apps/graphics/twm4nx: Replace most usage of NUL-terminated C strings - with NXWidgets::CNxString. From Gregory Nutt (2019-05-06). - * apps/graphics/twm4nx: Exploit the new feature to create hidden windows. - This cleans up some brief window startup anomalies. Also fixes an - initialization error in CMenus. From Gregory Nutt (2019-05-07). - * apps/graphics/twm4nx: First cut at redesigned dragging logic. Window - dragging now sort of works in an unreliable hurky-jerkky way. More to be - done. From Gregory Nutt (2019-05-07). - * apps/graphics/twm4nx: Extend the IEventTaps interfaces and user's - thereof to better handle the cases when dragging where the mouse position - gets ahead of the window updates and the reported mouse position lies not - in the toolbar window, but in the main window or even outside of the - window. From Gregory Nutt (2019-05-07). - * apps/graphics/twm4nx: Add initial files to support an NxTerm - application. On this initial commit, these are just the NxWM NxTerm - files with some renaming. These are not finished and have not yet been - hooked into the build system. From Gregory Nutt (2019-05-08). - * apps/graphics/nxwidgets: CWidgetControl::handleLeftClick now returns a - value to indicate if the click was actually processed or not. - CWidgetControl::pollMouseEvents: Correct return value. From Gregory - Nutt (2019-05-08). - * apps/graphics/twm4nx: CBackground::event(): Implement logic to handle a - left click on the background and to bring up the main Menu. - CWindowEvent: Extend message to distinguish between keyboard and mouse - input. Mouse position and buttons now accompany the mouse input data. - CMenus: Add methods to query and control the visibility of the menu. - With these changes, the main menu appears when any location on the - background not occupied by an icon is clicked. From Gregory Nutt - (2019-05-08). - * apps/graphics/twm4nx: CMenus now uses CWindows, rather that raw NX - windows. This rippled through to many other things due to conflicts - between NUL-terminated C strings and NXWidgets::CNxStrings. From Gregory - Nutt (2019-05-08). - * apps/graphics/twm4nx: CWindow: Add a global function that can be used to - determine the minimum width of a window. If the window is set to a width - smaller than this, then toolbar items will overlap and the toolbar will - be corrupted. This is a global function (rather than a method of - CWindow) because in some cases, this minimum width must be known before - the window is created. From Gregory Nutt (2019-05-08). - * apps/graphics/nxwidgets: Add methods to all windows to query if a window - is visible or hidden. From Gregory Nutt (2019-05-09). - * apps/graphics/twm4nx: Better integrate menus and iconification: Bring-up - up a menu is like de-iconifcation, except there is no icon to be erases; - taking down a menu is like iconification except that there is no icon to - present. - - apps/graphics/twm4nx: Use NxWidgets methods which work in all contexts - instead of trying to come up with a way to know if a window is displayed - through complex flags. - - apps/graphics/twm4nx: Add logic so that the main menu is placed at (or - near) the position where the background was clicked. - - apps/graphics/twm4nx: In resize operation, don't let window get narrower - than the minimum toolbar width. - - apps/graphics/twm4nx: The Icon Manager now adds a Main Menu entry that - will de-iconify the Icon Manager or raise to the top of the hierarchy if - not iconfified. This is useful when there are many open windows. - From Gregory Nutt (2019-05-09). - * apps/graphics/twm4nx: Use button array vs list box for menus. - - apps/graphics/twm4nx: Correct an error in how menu windows are created. - From Gregory Nutt (2019-05-10). - * apps/graphics/twm4nx: Add a 'Desktop' item to the main menu that will - iconify all windows and menus and just show the open desktop. - - apps/graphics/twm4nx: Add more controls for the events that will be - generated on basic window redraw, mouse/keyboard input, and keyboard input. - - apps/graphics/twm4nx: Add logic to support distribution of gnereric - application window events. - - apps/graphics/twm4nx: Window events are now communicated properly to the - application-specific event handler. Menus now seem to be receiving - events and working well. - From Gregory Nutt (2019-05-10). - * apps/system/spi: I needed a small test tool for spi in the style of the - I2C tool, but I didn't see one so I've hacked one out of the I2C tool - source. From Dave Marples (2019-05-10). - * apps/graphics/twm4nx: Add new logic to place an icon at a reasonable - spot on the background. From Gregory Nutt (2019-05-11). - * apps/graphics/twm4nx: Modify how applications register with the main - menu. Add logic to support all possible menu selection notification - methods: By putting up a sub-menu, by starting an application, or be - sending an event. From Gregory Nutt (2019-05-11). - * apps/graphics/twm4nx: Add an IApplicationFactory interface. From - Gregory Nutt (2019-05-11). - * apps/graphics/twm4nx: This commit incorporates the NxTerm window hosting - NSH. This is just code complete and just compiles with no errors. The - NxTerm item does not appear in the Main Menu, however, selecting the menu - item does not yet bring up the NxTerm window. - - apps/graphics/twm4nx: Clean up some logic associated with use of - multiple Icon Managers. From Gregory Nutt (2019-05-12). - * apps/graphics/twm4nx: Add missing event generation logic when a window is - closed. - - apps/graphics/twm4nx: Fix a couple of errors in the unused resize - logic: It was not hiding the resize menu tso it appeared as a artifact - in the upplr left hand corner. Was calling setSize() on the window - instead of getSize(). That was causing errors because the size being set - was uninitialized. From Gregory Nutt (2019-05-12). - * apps/graphics/NXWidgets/: NXWidgets::CNxWidgets: Fix some issues with - returned values. On setting the widget size or position, it was - returning false if there was no change in size or position. Many places - in the code were treating the false return value as an error. From - Gregory Nutt (2019-05-12). - * apps/graphics/twm4nx: Simpify application startup. - - apps/graphics/twm4nx: Various fixes to get the NxTerm window to come - up properly. It does now come up okay, but the system basically loses - its mind thereafter. Looks good until some buttons are pressed. - From Gregory Nutt (2019-05-12). - * apps/graphics/twm4nx: Fix several errors associated with the NxTerm - buttons. Most changes involved fixing crashes with the exit button is - pressed. Now the NxTerm windows behave well. However, they are not - receiving console input so there is still more to be done. - - apps/graphics/twm4nx: Fix error in placement of icons on the desktop - From Gregory Nutt (2019-05-13). - * apps/graphics/twm4nx: Icons can now be moved, but there are artifacts: - Need to erase the old icon region on the background before drawing the - new icon image during the move. From Gregory Nutt (2019-05-13). - * apps/graphics/twm4nx: When moving icons, erase the old icon image before - drawing the new one. - - apps/graphics/twm4nx: Add logic to detect collisions with reserved - regions in the background or with other icons when moving an icon on - the desktop. - From Gregory Nutt (2019-05-14). - * apps/graphics/twm4nx: Correct logic in Icon Manager for the case where - the number of windows causes the Icon Manager to increase in size by one - row. - - apps/graphics/twm4nx: Fix an error in event notification sent by the - Icon Manager when a window is selected. - - apps/graphics/twm4nx: In the Icon Manager, do not use the window name to - identify which button press corresponds to which Window. Window names - are not unique. Instead, it now keeps track of which row x column was - assigned to the window name. That row x column uniquely associates a - window with a button and does not depend on the window name in any way. - From Gregory Nutt (2019-05-14). - * apps/graphics/nxwidgets/src/cbuttonarray.cxx: Correct an error - CButtonArray. Was not correctly resizing the widget when the dimensions - of the button array changed. From Gregory Nutt (2019-05-15). - * apps/graphics/twm4nx: This is a complete redesign of the CResize class. - Only partially functional on initial commit. Initial testing is mixed. - The resize window appears, but nothing else good happens. No hardfaults - though. - - apps/graphics/twm4nx: Forgot to install the IEventTap instance. Now - resizing kind of works, but I can't get out of it! There is a basic - problem in the window needs to be updated for the new size and there is - no mechanism in place to do that (at least not with RAM backed windows). - - apps/graphics/twm4nx: Fix a bad width calculation. - From Gregory Nutt (2019-05-15). - * apps/graphics/twm4nx: Fix routing of redraw events. - - apps/graphics/twm4nx: Other toolbar buttons need to be disabled while - resizing. Lots of problems if you decide to iconify or exit while - resizing. CResize now disables all buttons except for the RESIZE button - while resizing. - - apps/graphics/twm4nx: Add an event and logic to support notification of - changes in the size of a window to NxTerm. - - apps/graphics/twm4nx: Correct the maximum size of a message. Recent - changes caused message send failures because a message exceed that - previous maximum size. From Gregory Nutt (2019-05-16). - * Various updates to adapt to change in boardctl() interface. From Gregory - Nutt (2019-05-16). - * apps/graphics/twm4nx: During resizing, when the tool bar is drawn, the - toolbar background must be redraw before the buttons and title are - redrawn. From Gregory Nutt (2019-05-16). - * apps/graphics/nxglyphs: Add a new resize cursor image. - apps/graphics/twm4nx: Use new resize cursor image. From Gregory Nutt - (2019-05-17). - * apps/graphics/twm4ndx: Compile out cursor support if we are using a - mouse From Gregory Nutt (2019-05-17). - -7.31 2019-07-21 Gregory Nutt - - * Remove some cases in Kconfig files of 'comment' with 'depends on'. That - is probably a good practice. I removed these because (1) is not done - elsewhere so it is just an inconsistency, and (2) the HTML generation - tool at nuttx/tools/kconfig2html.c would need to be extended to parse - that case. I don't have time to do that now. From Gregory Nutt - (2019-05-19). - * This change adds a calibration screen to Twm4Nx. In addition to the - Calibration screen port from NxWM, this required extensions to the event - handling logic to support (1) receiving raw, uncalibrated touchscreen - inputs, (2) shutting down of externally controlled windows. From Gregory - Nutt (2019-05-20). - * apps/graphics/twm4nx: Move application-related files into different - directories to separate them from the core Twm4Nx files. From Gregory - Nutt (2019-05-20). - * apps/graphics/twm4ndx: Compile out cursor support if we are using a - mouse. From Gregory Nutt (2019-05-20). - * apps/graphics/twm4nx: Fix an uninitialized variable that was causing - toolbar buttons to randomly come up enabled or disabled. Remove some - unused event definitions. From Gregory Nutt (2019-05-20). - * apps/graphics/twm4nx: Fix a calibration screen startup issue. Make an - initial calibration screen optional. From Gregory Nutt (2019-05-20). - * apps/nshlib: Fix all places where cle() and readline() are used. - readline() returns EOF on a failure. cle() returns a negated errno - value. Checking only for EOF causes failures to be missed (and infinite - loops ensuing). From Valmantas Paliksa (2019-05-21). - * Add an alternative COMPONTEMPORARY theme. Still has some artifacts on - the display. From Gregory Nutt (2019-05-21). - * apps/graphics/twm4nx: Use custom CWidgetStyle to force Icon background - to match selected desktop background. From Gregory Nutt (2019-05-21). - * apps/graphics/nxglyphs: Add more modern looking button images for the - Twm4Nx CONTEMPORARY theme. From Gregory Nutt (2019-05-21). - * apps/graphics/twm4nx: Add some definitions to support Themes. - Background image is now optional. From Gregory Nutt (2019-05-21). - * apps/graphics/twm4nx: Add a configuration option to control the number of - buttons in one column of the Icon Manager. The Icon Manager no longer - relies the default window width; now it determines a preferred window - width based primarily on the font size. From Gregory Nutt (2019-05-21). - * apps/: Removed all references to CONFIG_DISABLE_POLL. The standard - POSIX poll() can not longer be disabled. From Gregory Nutt (2019-05-21). - * apps/graphics/twm4nx: Revise logic to detect clicks on the background - image. The original implementation had some side effects. From Gregory - Nutt (2019-05-23). - * apps/graphics/twm4nx: Remove some remaining, unused stuff from TWM that - was never used. Menus need to close after the 'terminal' selection is - made. Otherwise, the menu can become buried under a newly open menu and - not easily recovered. From Gregory Nutt (2019-05-23). - * apps/graphics/twm4ndx: Add a 'critical' bit to the eventID. While - resizing, all events will be ignore except those marked critical. - * apps/graphics/twm4nx: CBackground now brings up the main menu if the - background image is clicked. This makes the behavior the same across all - of the background except when an icon is clicked. From Gregory Nutt - (2019-05-23). - * apps/graphics/twm4nx: Fix a bug in placement of icons on the desktop. - When many windows are displayed, a bug in the looping logic could cause - an infinite loop. From Gregory Nutt (2019-05-26). - * apps/graphics/twm4nx: Fix some errors found when enabling NX keyboard - support. The most important being that the mouse and keyboard drivers - need to be opened non-blocking. From Gregory Nutt (2019-05-26). - * apps/graphics/twm4nx/README.txt: Add an overview of how to create Twm4Nx - applications. From Gregory Nutt (2019-05-28). - * apps/graphics/slcd: Adds a CSLcd class that will generate graphic - simulated segments of an SLCD display. From Gregory Nutt (2019-05-31). - * apps/graphics/tmw4nx and apps/graphics/slcd: Add a CClock class that - implements the Twm4Nx digital clock based on the CSLcd simulated SLCD - segments. From Gregory Nutt (2019-06-01). - * apps/graphics/slcd: Improve the representation of '1', 'l', and 'I'. - From Gregory Nutt (2019-06-01). - * netutils/telnetd/telnetd_daemon.c: Fix another C89 violation that caused - the ez80 build to fail. From Gregory Nutt (2019-06-03). - * nshlib/nsh_parse.c: Fix a warning about an uninitialized variable from - the ZDS-II compiler. From Gregory Nutt (2019-06-03). - * apps/netutils/netinit: MAC address configuration was represented by type - long long. That is a problem for architectures that do not support type - long long. Replaces by two long configuration items. From Gregory Nutt - (2019-06-03). - * apps/nshlib/nsh_ddcmd.c: Seemingly nonsense change but somehow works - around a compilation error using the ZDS-II toolchain. It was claiming - that vtbl was undefined indd_outfopen(). From Gregory Nutt (2019-06-03). - * apps/netutils/json: Removed. Replaced with apps/netutils/cjson. From - Gregory Nutt (2019-06-03). - * industry/abnt_codi, include/industry/abnt_code.h, examples.abntcodi: - Adds support for ABNT CODI library. This is an energy meter protocol - used in Brazil. From Alan Carvalho de Assis (2019-06-15). - * apps/wireless/gs2200m: Add usrsock daemon for Tilt GS2200M Wi-Fi module - From Masayuki Ishikawa (2019-06-18). - * apps/industry: Add .gitignore for Kconfig From Masayuki Ishikawa - (2019-06-28). - * apps/examples/webserver: Fix to compile with - CONFIG_NETUTILS_HTTPD_SENDFILE=y. Also some configs such as - CONFIG_NETUTILS_HTTPDFILESTATS can be selected by menuconfig. From - Masayuki Ishikawa (2019-07-03). - * netutils/webserver: Add mp3 mime type to httpd.c From Masayuki Ishikawa - (2019-07-04). - * netutils/webserver: Add directory listing to httpd From Masayuki - Ishikawa (2019-07-05). - * netutils/webserver: Add web server info based on uname() From Masayuki - Ishikawa (2019-07-05). - * netutils/webserver: Fix directory listing containing period in name From - Masayuki Ishikawa (2019-07-06). - * apps/netutils/cjson/Kconfig: stdio floating point support required. - cJSON requires floating point support in printf (specifically the 'g' - conversion specifier). Thus, select LIBC_FLOATINGPOINT when - NETUTILS_CJSON is selected. From Michael Jung (2019-07-07). - * neutils/webserver: Fix file corruption in httpd_dirlist.c From Masayuki - Ishikawa (2019-07-10). - * wireless/gs2200m: Add channel parameter for AP mode From Masayuki - Ishikawa (2019-07-10). - * apps/examples/chrono: Add chronometer apps example. From Alan Carvalho - de Assis (2019-07-17). - -8.1 2019-09-14 Gregory Nutt - - * wireless/gs2200m: Add udp support to gs2200m_main.c. From Masayuki - Ishikawa (2019-07-25). - * netutils/dhcpd: Fixes bug where hwaddr was being used instead of - ipaddr in the ARP update. This bug seems to have been introduced 3 - years ago during a rewrite to remove a direct OS call to arp. I'm not - sure how others have not run into issues with this. The behavior I - was observing was that the DHCPD would go to offer an IP address, but - then send a ARP request for the IP instead because it didn't know - where to send the data. From Anthony Merlino (2019-07-26). - * I8sak improvements: - - wireless/ieee802154: Adds support for getting/setting maxretries and - promsicuous mode from i8sak - - wireless/ieee802154/i8sak: Fixes a build warning and handles a few - cases where a fault can occur due to not catching missing - arguments. From Anthony Merlino (2019-07-26). - * apps/netutils/netinit/netinit.c: Improve cleanup, removing 1 of 2 - warnings. Unhook PHY notification signal handler when cleaning up, if - an error occurs after the signal handler is put into place. From - Nathan Hartman (2019-07-26). - * apps/examples/webserver/webserver_main.c: Init network & run forever - only if not builtin app. Infer from CONFIG_NSH_BUILTIN_APPS if we are - a NSH built-in app or not. If built-in app (CONFIG_NSH_BUILTIN_APPS - defined) then we assume network is initialized prior to webserver - starting and we exit on webserver failure. If running standalone - (CONFIG_NSH_BUILTIN_APPS is undefined) then behavior is unchanged: - webserver initializes network and runs forever. From Nathan Hartman - (2019-07-26). - * apps/nshlib/nsh_fsutils.c: As noted by David S. Alessio, 'cat' should - not output any additional newline at the end of the cat'ed file - content. This was done to assure that the NSH prompt was presented on - a new line. However, that is not the correct behavior of 'cat' per - the IEEE std: "The standard output shall contain the sequence of - bytes read from the input files. Nothing else shall be written to the - standard output." Reference: - https://pubs.opengroup.org/onlinepubs/009695399/utilities/cat.html. - This commit changes the function nsh_catfile() which underlies the - 'cat' command and well as other NSH commands. Although this is the - correct behavior for 'cat' it may not be the correct behavior for - other commands implemented via nsh_catfile(). That remains to be - determined. From Gregory Nutt (2019-07-29). - * wireless/gs2200m: Add DHCP client handling in ioctl_request() From - Masayuki Ishikawa (2019-07-30). - * apps/system/cle/cle.c: ASCII DEL should be treated by Delete-Left. - From Dave Marples (2019-08-01). - * apps/fsutils/passwd: Handle the improved the format of the - /etc/passwd file. It is now a little more similar to other systems. - From Gregory Nutt (2019-08-03). - * apps/examples/uid: Demo used to verify PASSWD and GROUP interfaces. - From Gregory Nutt (2019-08-04). - * Change name configs/ to boards/ in comments, Documentation, Tools, - etc. From Gregory Nutt (2019-08-05). - * Fix paths in README.txt files which have changed due to the - restructuring of nuttx/boards directory. From Gregory Nutt - (2019-08-05). - * Update configurations instructions in README.txt files to show ':' - delimiter vs '/' delimiter. From Gregory Nutt (2019-08-05). - * Update comments, README's, etc. to reflect changes to nuttx/boards - directory reorganization. From Gregory Nutt (2019-08-09). - * Change all occurrences of /bin/(ba)sh to /usr/bin/env bash which - appears more portable From Manuel Stühn (2019-08-10). - * wireless/ieee802154/i8sak: Fixes naming caused by naming change in - nuttx. From Anthony Merlino (2019-08-10). - * wireless/ieee802154/libmac: Adds support for getting/setting the FCS - length From Anthony Merlino (2019-08-10). - * i8sak: Allow setting the endpoint PAN ID. From Anthony Merlino - (2019-08-10). - * i8shark: Adds support for intentionally suppressing passing the FCS - so that Wireshark doesn't try to validate it. From Anthony Merlino - (2019-08-10). - * wireless/ieee802154/i8sak: Adds support for energy scan result - printout. From Anthony Merlino (2019-08-13). - * i8sak: Fixes conversion from extended address to IPv6 address. From - Anthony Merlino (2019-08-13). - * netutils/dhcpc: Add host name support to dhcp client From Masayuki - Ishikawa (2019-08-14). - * Bugfix/i2ctool dev clobbers slave config - - friendlier I2C "knock-knock" uses only read request. While many I2C - slave devices have multiple indexed registers, some have only one - register and it's not indexed. For example, the I2C bus switch - TCA9548A has only a Control Register, attempting to index to - "Reg[0]" alters its contents to 0x00 disabling all subordinate - buses. This patch fixes that problem by simply trying to read - something/anything from the slave. This also helps coax out slaves - with register files that start from a higher index, i.e. the - AT24CS0x, FLASH chips with a UUID that appears as a 2nd I2C slave at - (address+8), report their serial number at Reg[80]-Reg[8F] and will - NAK a read of Reg[0]. - - modify get/set to prevent write of reg index if not specified From - David Alessio (2019-08-20). - * Move apps/builtins/builtin_forindex.c to nuttx/libs/libc/builtin since - it is required by kernel logic as well. Other changes account for - movement of builtin.h from nuttx/include/nuttx/binfmt/built.h to - nuttx/include/lib/builtin.h. From Gregory Nutt (2019-08-23). - * Makefile: Added support for application-specific export target. Used - by nuttx/tools/mkexport.sh. From Pavel Pisa (2019-08-30). - * wireless/gs2200m/gs2200m_main.c: ioctl_request() supports - SIOCGIFHWADDR. From Masayuki Ishikawa (2019-09-02). - * examples/pwm/pwm_main.c: Update the pwm header path. From Augusto - Fraga Giachero (2019-09-02). - -8.2 2019-11-16 Gregory Nutt - - * netutils/netlib/netlib_autoconfig.c: Correct ICMPv6 socket create - error. From ligd (2019-09-15). - * Revert netutils/netlib: correct ICMPv6 socket create error. This - reverts a previous change. From Xiang Xiao (2019-09-20). - * system/symtab: Remove system/symtab since the same functionality - exist in nuttx now. From Gregory Nutt (2019-09-28). - * Fix minor typos in docs and comments. From Nathan Hartman - (2019-09-29). - * import/Makefile's: Remove symbol table generation from imports/Makefile - to avoid the confusion with the official method. From Xiang Xiao - (2019-10-01). - * examples/romfs: Remove romfs_testdir.h. That file is regenerated - whenever the example is built and so should not be in the repository. - From Gregory Nutt (2019-10-01). - * Remove the duplicated build script files from apps/impor/tools. - These will now be copied from nuttx/tools when the export package is - created. From Xiang Xiao (2019-10-01). - * tools/mksymtab.sh: Include nuttx/symtab.h instead of nuttx/binfmt/symtab.h. - From Xiang Xiao (2019-10-01). - * apps/Makefile: Remove EXE_DIR and put binary into bin folder like - nuttx. From Xiang Xiao (2019-10-01). - * apps/Makefile: Change BIN_DIR to BINDIR to follow nuttx style. From - Xiang Xiao (2019-10-01). - * apps/Makefile: Move APPDIR set to the first and remove APPDIR from - command line but ensure TOPDIR/BINDIR are always set in command line. - From Xiang Xiao (2019-10-01). - * Makefiles: Remove .PRECIOUS if Makefile doesn't touch libapps. From - Xiang Xiao (2019-10-01). - * apps/wireless Makefiles: Utilize Directory.mk for consistency. From - Xiang Xiao (2019-10-01). - * Makefiles: Change ${shell pwd} to $(CURDIR) since pwd doesn't exist on - Windows From Xiang Xiao (2019-10-02). - * Application.mk: Support the ability to change the CFLAGS for the - compilation of a single file. Set special compiler options as follows the rule: - - sourcefile + fixed suffix "_[A|C|CPP|CXX]FLAGS" - - apps/examples/hello/Makefile: - $(SRCDIR)/hello_main.c_CFLAGS = -DTEST From Xiang Xiao (2019-10-03). - * apps/Makefile: Make libapps overwritable. From Xiang Xiao (2019-10-03). - * CONFIG_BUILD_LOADABLE: Check the kernel function callable by BUILD_KERNEL - instead of BUILD_LOADABLE since BUILD_LOADABLE could be turned on even - with BUILD_FLAT. From Xiang Xiao (2019-10-03). - * Clean up Makefile under apps folder no functional changes. From Xiang - Xiao (2019-10-04). - * fsutils/passwd/passwd_lock.c: Use named semaphore by checking - CONFIG_FS_NAMED_SEMAPHORES instead of CONFIG_KERNEL_BUILD. From Xiang - Xiao (2019-10-04). - * system/lzf/lzf_main.c: Check the protection by CONFIG_SYSTEM_LZF != - CONFIG_m (not elf binary) instead of CONFIG_KERNEL_BUILD. From Xiang - Xiao (2019-10-04). - * Fix typo error in testing/cxxtest. From Xiang Xiao (2019-10-04). - * Application.mk: Correct an error in PATH usage. Use of toolchain - path causes make errors. From Gregory Nutt (2019-10-04). - * apps/; Change space to tab and help to ---help--- in Kconfig files. - From Xiang Xiao (2019-10-05). - * Some improvements to netutils/cjson and testing/unity - - netutils/cjson/Makefile: fix the error when creating Make.dep - - testing/unity/Makefile: fix the error when creating Make.dep - - include/.gitignore: ignore cJSON headers - - netutils/cjson/Kconfig: update default version to 1.7.12. Previous - releases raise compilation warnings about redefined true/false From - raiden00pl (2019-10-06). - * Application.mk and main.c files: Change builtin's entry point from - main to xxx_main by macro expansion. This change make the entry point - fully compliant with POSIX/ANSI standard. From Xiang Xiao (2019-10-06). - * apps.: Remove the inappropriate NSH_BUILTIN_APPS coupling - 1. Check NSH_NETINIT for self network initialization - 2. Check NSH_ARCHINIT for sel arch specific initialization - 3. Always show help regardless of NSH_BUILTIN_APPS - 4. Loop forever regardless of NSH_BUILTIN_APPS, user could: - a.change the default behavior by the command line argument - b.or ctrl+c to break out the loop From Xiang Xiao (2019-10-07). - * apps/system/composite: Remove usb serial loopback test code we can - achieve the same effect by cat or dd command. From Xiang Xiao - (2019-10-07). - * apps/: In Makefiles remove 'INCDIROPT = -w' which is already defined - in apps/Make.defs. From Xiang Xiao (2019-10-07). - * Makefile, Application.mk: Clean up cygpath usage - 1.Remove cygpath from the related path since the conversion isn't - necessary - 2.Call cygpath inplace for the absolute path to avoid the confusion - From Xiang Xiao (2019-10-07). - * tools/mkromfsimg.sh: Use sed to add const to ROMFS declarations so - that they like in FLASH not RAM. From Bernd Walter (2019-10-07). - * examples/serialblaster, serialrx, udpblaster: Update to serial/UDP - tests. From Anjana (2019-10-11). - * nshlib/ and system/cle: Add basic color support to the CLE editor. - From Dave Marples (2019-10-12). - * Feature/i2c dump: - - friendlier I2C "knock-knock" uses only read request. While many I2C slave - devices have multiple indexed registers, some have only one register and it's - not indexed. For example, the I2C bus switch TCA9548A has only a Control - Register, attempting to index to "Reg[0]" alters its contents to 0x00 - disabling all subordinate buses. This change fixes that problem by simply - trying to read something/anything from the slave. This also helps coax out - slaves with register files that start from a higher index, i.e. the AT24CS0x, - FLASH chips with a UUID that appears as a 2nd I2C slave at (address+8), - report their serial number at Reg[80]-Reg[8F] and will NAK a read of Reg[0]. - - modify get/set to prevent write of reg index if not specified - - add 'dump' command to issue a single transaction to retrieve multiple bytes - from an I2C slave and register/offset. - - use NuttX' isprint() - - refactor to reduce coupling, hexdump only needs outstream From David Alessio - (2019-10-14). - * apps/system/i2c: Fix up some complaints from nxstyle. From Gregory Nutt - (2019-10-15). - * Makefiles: This reverts part of a previous change. This restores 'conditional' - inclusion of TOPDIR/Make.defs. Otherwise all make targets fail if the board has - not been configured. That is okay most of the time, but not for things like - clean and distclean which should not depend on being configured. From Gregory - Nutt (2019-10-15). - * Bugfix/spitool exch parse txdata - * apps/system/cle/cle.c: Fix warning, re-order to follow coding standard. From - Xiang Xiao (2019-10-17). - * apps/: In all Make.def files, append to CONFIGURED_APPS with the absolute - path. From Xiang Xiao (2019-10-17). - * apps/: Move the common variable definitions from other build-related files into - apps/Make.defs. From Xiang Xiao (2019-10-17). - * In all Make.defs files, append CONFIGURED_APPS with the consistent ifeq/ifneq. - From Xiang Xiao (2019-10-17). - * graphics/twm4nx/Makefile: Fix a recently introduced error that broke all Twm4Nx - configurations. From Gregory Nutt (2019-10-17). - * apps/examples/nxterm/Makefile: PROGNAME, PRIORITY, STACKSIZE varialble names - did not match declarations in Kconfig file. From Gregory Nutt (2019-10-17). - * apps/system/spi: Add options to spec devtype, id for chip select. From David - S. Alessio (2019-10-18). - * examples: RTTL player example. A simple RTTL player demo that is able to play - tunes according to an RTTL song. - References - https://en.wikipedia.org/wiki/Ring_Tone_Transfer_Language - https://cs.nyu.edu/courses/fall03/V22.0201-003/notes.htm From Alin Jerpelea - (2019-10-18). - * apps/examples/udp, nettest, flowc, tcpblaster, and udpblaster: Back out parts - of a previous change that broke the build of these examples. From Gregory Nutt - (2019-10-18). - * apps/Application.mk: Fix main redefine warning by using per file - CFLAGS/CXXFLAGS. From Xiang Xiao (2019-10-19). - * examples/nxlines/Kconfig: Correct nxlines example program name. From Gregory - Nutt (2019-10-19). - * apps/nshlib/nsh_fscmds.c: The NSH mkrd command was in violation of the NuttX - portable POSIX interface. it was calling the internal OS function - ramdisk_register() directly. No only is this a violation of the interface - specification, but also prevents use of mkrd in PROTECTED or KERNEL buils. - With this change, the NSH mkrd command now used the BOARDIOC_MKRD boardctl() - command. This command is available in all build modes. The effect of this - change is to move the hear of the NSH mkrd command into to OS and provide - user-space access via boardctl(). From Gregory Nutt (2019-10-26). - * apps/examples/mount: Replace illegal call to ramdisk_register() with a call to - boardctl(BOARDIOC_MKRD). From Gregory Nutt (2019-10-26). - * apps/nshlib/Kconfig and examples/mount/Kconfig: Automatically select - CONFIG_DRVR_MKRD is it is needed by the configuration. From Gregory Nutt - (2019-10-26). - * apps/nshlib: Tighten up some of the conditional logic for mkrd. From Gregory - Nutt (2019-10-26). - * nshlib/nsh_romfsetc.c and graphics/traveler/trv_romfs.c: Replace direct calls - to romdisk_register() with indirect calls via boardioctl(BOARDIOC_ROMDISK). - This not only fixes the violation of the portable POSIX OS interface, but also - permits use of ROM disks in PROTECTED and KERNEL modes. There are still - multiple illegal calls to romdisk_register() from code under apps/examples. - These all must also be converted to use boardioctl(BOARDIOC_ROMDISK) someday. - From Gregory Nutt (2019-10-26). - * Makefile: Fix warning: jobserver unavailable: using -j1. Add '+' to parent make - rule. From Xiang Xiao (2019-10-29). - * apps/nshlib/nsh.h: nsh: Remove the redundant check for netcmd. Checking - FS_PROCFS and FS_PROCFS_EXCLUDE_NET is enough and make the type of network - device could be shown by ifconfig. From Xiang Xiao (2019-11-03). - * apps/nshlib: Add rptun cmd for boot remote core. From ligd (2019-11-03). - * apps/nshlib/README.txt: Update to include the new rptun command. From Gregory - Nutt (2019-11-03). - * apps/nshlib/README.txt: Update to include the new rptun command. From Gregory - Nutt (2019-11-03). - * netutils/netlib/netlib_getarptab.c: Add a function to read the entire ARP - table using NETLINK_ROUTE protocol. From Gregory Nutt (2019-11-03). - * nshlib/nsh_netcmds.c: Add a -t option to the arp command which will enable - printing the entire ARP table. From Gregory Nutt (2019-11-03). - * netutils/netlib/netlib_getarptab.c: Misc fixes from initial testing with the - 'arp -t' commeand. From Gregory Nutt (2019-11-03). - * apps/nshlib/nsh_netcmds.c: Fix some alignment in output of 'arp -t' command. - From Gregory Nutt (2019-11-03). - * apps/examples/bmi160: Add bmi160 example app. This app will read the BM160 - data and list it on the NSH console. From Alin Jerpelea (2019-11-04). - * apps/examples/charger: Simple charger example that will display on the console - voltage and current values. From Alin Jerpelea (2019-11-04). - * apps/nshlib: Add new NSH command, 'pmconfig'. From ligd (2019-11-04). - * apps/nshlib/README.txt: Update README to at least mention the new pmconfig - command. From Gregory Nutt (2019-11-04). - * netutils/netlib/netlib_getarptab.c: Do not initialize response buffer, it is - write-only. Also add a check to assure that the sequence number in the response - is the same as the sequence number in the request. From Gregory Nutt - (2019-11-04). - * apps/system/cle/cle.c: This change modifies the cle to use the streams file - interface more consistently and has removed the observed race conditions. It - was previously a mix of streams and fileio. It also simplifies the VT100 cursor - position handling. From Dave Marples (2019-11-04). - * apps/netutils/netlib/netlib_getarptab.c: Fix typos in comments. From Gregory - Nutt (2019-11-04). - * apps/system/cu/cu_main.c: (1) Fix early exit. getc(stdin) can return 0 the - first time around. (2) Set optind to zero. getopt() was being left in a bad - state, causing parsing errors on second use. (3) Fix priority of cu_listen(). - (4) Add support for -h. From David Alessio (2019-11-05). - * netutils/netlib/netlib_getarptab.c: Per an old Linux Journal article, the - nl_pid fild of struct sockaddr_nl should be set to the PID of the task that - created the Netlink socket. Also fixes a warning. From Gregory Nutt - (2019-11-07). - * nshlib/Kconfig: Add missing NSH_DISABLE_DMESG, typos. From Juha Niskanen - (2019-11-08). - * apps/system/usrsock_rpmsg: Add rpmsg based usrsock implementation. From Jianli - Dong (2019-11-08). - * netutils/netlib/netlib_getnbtab.c: Add support for retrieving a snapshot of the - IPv6 neighbor table using Netlink sockets. From Gregory Nutt (2019-11-08). - * apps/system/usrsock_rpmsg/Make.defs: Correct configured application name. From - chao.an (2019-11-09). - * apps/netutils/netlib/netlib_getnbtab.c: Add a utility function that will return - a list of all network devices in the UP state. From Gregory Nutt (2019-11-09). - * netutils/netlib/netlib_getroute.c: Add function to retrieve routing tables - using netlink. From Gregory Nutt (2019-11-10). - * Make.defs: Fix nuttxtoolsunlink.sh: Command not found. From Xiang Xiao - (2019-11-11). - * apps/system/usrsock_rpmsg/usrsock_rpmsg_server.c: Fix - usrsock_rpmsg_server.c:554:7: warning: 'i' may be used uninitialized in this - function [-Wmaybe-uninitialized]. From Xiang Xiao (2019-11-11). - * apps/examples/netlink_route: Add test/example of NETLINK_ROUTE 'get' - operations. apps/netutils/netlib: Fixes to NETLINK_ROUTE helpers found by - testing with apps/examples/netlink_route. From Gregory Nutt (2019-11-11). - * examples/netlink_route/netlink_route_main.c: Use options to disable individual - NETLINK_ROUTE commands. From Gregory Nutt (2019-11-12). - * netutils/netlib/netlib_getdevs.c: Add comments and a placeholder for the - RTM_NEWROUTE response. From Gregory Nutt (2019-11-12). - -8.3 2020-xx-xx Gregory Nutt