netinit: Improve WiFi configuration

The current WiFi configuration expects user to look at symbols in
the wireless headers to configure it. This patch will improve it.
Notice that even those symbols that are bitfields are not allowed
to have more than 1 bit set at time.

netutils/netinit/Kconfig

@@ -503,28 +503,89 @@ menu "WAPI Configuration"
 	depends on NET && WIRELESS_WAPI
 
 config NETINIT_WAPI_STAMODE
-	int "Wireless mode of operation"
-	default 2
-	range 0 8
+	int
+	default 0 if NETINIT_WAPI_STAMODE_AUTO
+	default 1 if NETINIT_WAPI_STAMODE_ADHOC
+	default 2 if NETINIT_WAPI_STAMODE_INFRA
+	default 3 if NETINIT_WAPI_STAMODE_MASTER
+	default 4 if NETINIT_WAPI_STAMODE_REPEAT
+	default 5 if NETINIT_WAPI_STAMODE_MONITOR
+	default 6 if NETINIT_WAPI_STAMODE_MESH
+
+choice
+	prompt "Select the WiFi Operation Mode"
+	default NETINIT_WAPI_STAMODE_INFRA
 	---help---
 		Mode of operation.  See the IW_MODE_* definitions in
 		include/nuttx/wireless/wireless.  The default value corresponds to
 		IW_MODE_INFRA
 
+
+config NETINIT_WAPI_STAMODE_AUTO
+	bool "Auto"
+
+config NETINIT_WAPI_STAMODE_ADHOC
+	bool "Adhoc"
+
+config NETINIT_WAPI_STAMODE_INFRA
+	bool "Infra"
+
+config NETINIT_WAPI_STAMODE_MASTER
+	bool "Master"
+
+config NETINIT_WAPI_STAMODE_REPEAT
+	bool "Repeater"
+
+config NETINIT_WAPI_STAMODE_MONITOR
+	bool "Monitor"
+
+config NETINIT_WAPI_STAMODE_MESH
+	bool "Mesh"
+
+endchoice # WiFi Configuration Mode
+
 config NETINIT_WAPI_AUTHWPA
-	hex "IW_AUTH_WPA_VERSION value"
-	default 0x00000004
-	range 0x00000001 0x00000004
+	hex
+	default 0x00000001 if NETINIT_WAPI_AUTHWPA_DISABLED
+	default 0x00000002 if NETINIT_WAPI_AUTHWPA_WPA
+	default 0x00000004 if NETINIT_WAPI_AUTHWPA_WPA2
+	default 0x00000006 if NETINIT_WAPI_AUTHWPA_WPA_WPA2
+
+choice
+	prompt "Select the WPA Version"
+	default NETINIT_WAPI_AUTHWPA_WPA2
 	---help---
 		IW_AUTH_WPA_VERSION values.  See the IW_AUTH_WPA_VERSION_* definitions
 		in include/nuttx/wireless/wireless.  The default value corresponds to
 		IW_AUTH_WPA_VERSION_WPA2.  NOTE that this is a bit-encoded field.  The
 		only valid values are 0x00000001, 0x00000002, and 0x00000004
 
+config NETINIT_WAPI_AUTHWPA_DISABLED
+	bool "Disabled"
+
+config NETINIT_WAPI_AUTHWPA_WPA
+	bool "WPA Only"
+
+config NETINIT_WAPI_AUTHWPA_WPA2
+	bool "WPA2 Only"
+
+config NETINIT_WAPI_AUTHWPA_WPA_WPA2
+	bool "WPA or WPA2"
+
+endchoice # WPA Version
+
 config NETINIT_WAPI_CIPHERMODE
-	hex "IW_AUTH_PAIRWISE_CIPHER and IW_AUTH_GROUP_CIPHER values"
-	default 0x00000008
-	range 0x00000001 0x00000010
+	hex
+	default 0x00000001 if NETINIT_WAPI_CIPHERMODE_NONE
+	default 0x00000002 if NETINIT_WAPI_CIPHERMODE_WEP40
+	default 0x00000004 if NETINIT_WAPI_CIPHERMODE_TKIP
+	default 0x00000008 if NETINIT_WAPI_CIPHERMODE_CCMP
+	default 0x00000010 if NETINIT_WAPI_CIPHERMODE_WEP104
+	default 0x00000020 if NETINIT_WAPI_CIPHERMODE_AES_CMAC
+
+choice
+	prompt "Select the Cipher Mode"
+	default NETINIT_WAPI_CIPHERMODE_CCMP
 	---help---
 		IW_AUTH_PAIRWISE_CIPHER and IW_AUTH_GROUP_CIPHER values. See the
 		IW_AUTH_CIPHER_* definitions in include/nuttx/wireless/wireless.
@@ -532,14 +593,94 @@ config NETINIT_WAPI_CIPHERMODE
 		this is a bit-encoded field.  The only valid values are 0x00000001,
 		0x00000002,0x00000004, ... 0x00000010
 
+config NETINIT_WAPI_CIPHERMODE_NONE
+	bool "None"
+
+config NETINIT_WAPI_CIPHERMODE_WEP40
+	bool "WEP40"
+
+config NETINIT_WAPI_CIPHERMODE_TKIP
+	bool "TKIP"
+
+config NETINIT_WAPI_CIPHERMODE_CCMP
+	bool "CCMP"
+
+config NETINIT_WAPI_CIPHERMODE_WEP104
+	bool "WEP104"
+
+config NETINIT_WAPI_CIPHERMODE_AES_CMAC
+	bool "AES-CMAC"
+
+endchoice # WiFi Cipher
+
 config NETINIT_WAPI_ALG
-	int "Algorithm"
-	default 3
-	range 0 13
+	int
+	default 0 if NETINIT_WAPI_ALG_NONE
+	default 1 if NETINIT_WAPI_ALG_WEP
+	default 2 if NETINIT_WAPI_ALG_TKIP
+	default 3 if NETINIT_WAPI_ALG_CCMP
+	default 4 if NETINIT_WAPI_ALG_IGTK
+	default 5 if NETINIT_WAPI_ALG_PMK
+	default 6 if NETINIT_WAPI_ALG_GCMP
+	default 7 if NETINIT_WAPI_ALG_SMS4
+	default 8 if NETINIT_WAPI_ALG_KRK
+	default 9 if NETINIT_WAPI_ALG_GCMP_256
+	default 10 if NETINIT_WAPI_ALG_CCMP_256
+	default 11 if NETINIT_WAPI_ALG_GMAC_128
+	default 12 if NETINIT_WAPI_ALG_GMAC_256
+	default 13 if NETINIT_WAPI_ALG_CMAC_256
+
+choice
+	prompt "Select the Crypto Algorithm"
+	default NETINIT_WAPI_ALG_CCMP
 	---help---
 		Algorithm.  See enum wpa_alg_e in apps/include/wireless/wapi.h.  The
 		default corresponds to WPA_ALG_CCMP.
 
+config NETINIT_WAPI_ALG_NONE
+	bool "None"
+
+config NETINIT_WAPI_ALG_WEP
+	bool "WEP"
+
+config NETINIT_WAPI_ALG_TKIP
+	bool "TKIP"
+
+config NETINIT_WAPI_ALG_CCMP
+	bool "CCMP"
+
+config NETINIT_WAPI_ALG_IGTK
+	bool "IGTK"
+
+config NETINIT_WAPI_ALG_PMK
+	bool "PMK"
+
+config NETINIT_WAPI_ALG_GCMP
+	bool "GCMP"
+
+config NETINIT_WAPI_ALG_SMS4
+	bool "SMS4"
+
+config NETINIT_WAPI_ALG_KRK
+	bool "KRK"
+
+config NETINIT_WAPI_ALG_GCMP_256
+	bool "GCMP-256"
+
+config NETINIT_WAPI_ALG_CCMP_256
+	bool "CCMP-256"
+
+config NETINIT_WAPI_ALG_GMAC_128
+	bool "GMAC-128"
+
+config NETINIT_WAPI_ALG_GMAC_256
+	bool "GMAC-256"
+
+config NETINIT_WAPI_ALG_CMAC_256
+	bool "CMAC-256"
+
+endchoice # WiFi Algorithm
+
 config NETINIT_WAPI_SSID
 	string "SSID"
 	default ""