sergiotarxz/nuttx-apps
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Update README.txt, remove references to appconfig and apps/.config

Browse Source
This commit is contained in:
Gregory Nutt 2014-03-07 14:17:59 -06:00
parent 2527f728f4
commit 5cef1de5a2
1 changed files with 17 additions and 17 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

34
UnitTests/README.txt
View File

@ -11,8 +11,9 @@ Contents
a) Configure NuttX a) Configure NuttX
b) Enable C++ Support b) Enable C++ Support
c) Enable Debug Options c) Enable Debug Options
d) Other Possible nuttx/.config changes d) NxWM
e) Other Possible apps/.config changes e) Other Possible .config file changes
f) Other Possible .config file changes
2. Configure in the Selected Unit Test 2. Configure in the Selected Unit Test
o Work-Arounds o Work-Arounds
1. Build Issues 1. Build Issues
@ -65,7 +66,7 @@ Installing and Building the Unit Tests
b) Enable C++ Support b) Enable C++ Support
If you are not using the sim/nsh2 or stm3210e-eval, you will need to add If you are not using the sim/nsh2 or stm3210e-eval, you will need to add
the following definitions to the nuttx configuration at nuttx/.config to the following definitions to the NuttX configuration at nuttx/.config to
enable C++ support: enable C++ support:
CONFIG_HAVE_CXX=y CONFIG_HAVE_CXX=y
@ -74,7 +75,7 @@ Installing and Building the Unit Tests
writing *ONLY* the sim/nsh2 and stm321-e-eval configurations have C++ support writing *ONLY* the sim/nsh2 and stm321-e-eval configurations have C++ support
pre-enabled). pre-enabled).
d) Enable Debug Options c) Enable Debug Options
If you are running on a simulated target, then you might also want to If you are running on a simulated target, then you might also want to
enable debug symbols: enable debug symbols:
@ -84,12 +85,12 @@ Installing and Building the Unit Tests
Then you can run the simulation using GDB or DDD which is a very powerful Then you can run the simulation using GDB or DDD which is a very powerful
debugging environment! debugging environment!
e) Special configuration requirements for the nxwm unit test: d) Special configuration requirements for the nxwm unit test:
CONFIG_NXCONSOLE=y CONFIG_NXCONSOLE=y
CONFIG_NX_MULTIUSER=y CONFIG_NX_MULTIUSER=y
f) Other nuttx/.config changes -- NSH configurations only. e) Other .config file changes -- NSH configurations only.
If the configuration that you are using supports NSH and NSH built-in tasks If the configuration that you are using supports NSH and NSH built-in tasks
then all is well. If it is an NSH configuration, then you will have to define then all is well. If it is an NSH configuration, then you will have to define
@ -101,7 +102,7 @@ Installing and Building the Unit Tests
to change anything further in the nuttx/.config file if you are using either to change anything further in the nuttx/.config file if you are using either
of these configurations. of these configurations.
g) Other apps/.config changes -- NON-NSH configurations only. f) Other .config file changes -- NON-NSH configurations only.
Entry Point. You will need to set the entry point in the .config file. Entry Point. You will need to set the entry point in the .config file.
For NSH configurations, the entry point will always be "nsh_main" and you For NSH configurations, the entry point will always be "nsh_main" and you
@ -123,24 +124,23 @@ Installing and Building the Unit Tests
etc. etc.
For non-NSH configurations (such as the sim/touchscreen) you will have to For non-NSH configurations (such as the sim/touchscreen) you will have to
remove the CONFIGURED_APPS seting that contains the user_start function so remove the configuration setting that provided the "main" function so
that you use the user_start in the unit test code instead. So, for example, that you use the "main" in the unit test code instead. So, for example,
with the sim/touchscreen configuration you need to remove the following from with the sim/touchscreen configuration you need to remove the following from
the apps/.config file: the NuttX configuration file (.config):
CONFIGURED_APPS += examples/<example> ## REMOVE CONFIG_EXAMPLES_TOUSCHCREEN=y ## REMOVE (provided "tc_main")
The following step will then install the new, correct directory containing The following step will then install the new, correct directory containing
the user_start function for the selected unit test. If you see that NSH the user_start function for the selected unit test. If you see that NSH
is configured: is configured:
CONFIGURED_APPS += examples/nsh ## DO NOT REMOVE CONFIG_EXAMPLES_NSH=y ## DO NOT REMOVE
Then DO NOT REMOVE the CONFIGURED_APPS setting. Go back and re-read c) Then go back and re-read e) above.
above. Do either c) or d). Don't do both!
sim/nsh2 and stm3210e-eval/nsh2 both NSH configurations. You do not need sim/nsh2 and stm3210e-eval/nsh2 are both NSH configurations. You do not need
to change anything further in the apps/.config file for any NSH configuration. to change anything further in the .config file for any NSH configuration.
2. Configure/Install the Selected Unit Test 2. Configure/Install the Selected Unit Test
@ -321,7 +321,7 @@ Example
$ ./configure.sh sim/nsh2 $ ./configure.sh sim/nsh2
$ cd - $ cd -
2. Edit nuttx/.config to enable C++ support 2. Edit the NuttX .config file to enable C++ support
Do nothing... sim/nsh2 already has C++ support enabled. Do nothing... sim/nsh2 already has C++ support enabled.