apps/examples/udp: The UDP test example has been extend to support IPv6 domain sockets

examples/nettest/Makefile

@@ -121,18 +121,19 @@ $(TARG_COBJS) $(TARG_MAINOBJ): %$(OBJEXT): %.c
 
 $(HOST_OBJS): %$(HOSTOBJEXT): %.c
 	@echo "CC:  $<"
-	@$(HOSTCC) -c $(HOSTCFLAGS) $< -o $@
+	$(Q) $(HOSTCC) -c $(HOSTCFLAGS) $< -o $@
+
+config.h: $(TOPDIR)/include/nuttx/config.h
+	@echo "CP:  $<"
+	$(Q) cp $< $@
 
 $(HOST_BIN): config.h $(HOST_OBJS)
 	@echo "LD:  $@"
-	@$(HOSTCC) $(HOSTLDFLAGS) $(HOST_OBJS) -o $@
+	$(Q) $(HOSTCC) $(HOSTLDFLAGS) $(HOST_OBJS) -o $@
-
-config.h: $(TOPDIR)/include/nuttx/config.h
-	@cp $< $@
 
 .built: config.h $(TARG_OBJS)
 	$(call ARCHIVE, $(TARG_BIN), $(TARG_OBJS))
-	@touch .built
+	$(Q) touch .built
 
 ifeq ($(CONFIG_BUILD_KERNEL),y)
 $(BIN_DIR)$(DELIM)$(PROGNAME): $(OBJS) $(TARG_MAINOBJ)

examples/udp/Kconfig

@@ -6,6 +6,7 @@
 config EXAMPLES_UDP
 	bool "UDP example"
 	default n
+	depends on NET_UDP
 	---help---
 		Enable the UDP example
 
@@ -15,6 +16,25 @@ config EXAMPLES_UDP_SERVER
 	bool "Target is the server"
 	default n
 
+choice
+	prompt "IP Domain"
+	default EXAMPLES_UDP_IPv4 if NET_IPv4
+	default EXAMPLES_UDP_IPv6 if NET_IPv6 && !NET_IPv4
+
+config EXAMPLES_UDP_IPv4
+	bool "IPv4"
+	depends on NET_IPv4
+
+config EXAMPLES_UDP_IPv6
+	bool "IPv6"
+	depends on NET_IPv6
+
+endchoice # IP Domain
+
+if EXAMPLES_UDP_IPv4
+
+comment "IPv4 addresses"
+
 config EXAMPLES_UDP_IPADDR
 	hex "Target IP address"
 	default 0x0a000002
@@ -32,4 +52,387 @@ config EXAMPLES_UDP_SERVERIP
 	default 0x0a000001 if !EXAMPLES_UDP_SERVER
 	default 0x0a000002 if EXAMPLES_UDP_SERVER
 
+
+endif # EXAMPLES_UDP_IPv4
+
+if EXAMPLES_UDP_IPv6
+
+comment "Target IPv6 address"
+
+config EXAMPLES_UDP_IPv6ADDR_1
+	hex "[0]"
+	default 0xfc00
+	range 0x0 0xffff
+	---help---
+		Target IPv6 address.  This is a 16-bit integer value in host order.
+		Each of the eight values forming the full IP address must be
+		specified individually.  This is the first of the 8-values.  The
+		default for all eight values is fc00::2.
+
+config EXAMPLES_UDP_IPv6ADDR_2
+	hex "[1]"
+	default 0x0000
+	range 0x0 0xffff
+	---help---
+		Target IPv6 address.  This is a 16-bit integer value in host order.
+		Each of the eight values forming the full IP address must be
+		specified individually.  This is the second of the 8-values.  The
+		default for all eight values is fc00::2.
+
+config EXAMPLES_UDP_IPv6ADDR_3
+	hex "[2]"
+	default 0x0000
+	range 0x0 0xffff
+	---help---
+		Target IPv6 address.  This is a 16-bit integer value in host order.
+		Each of the eight values forming the full IP address must be
+		specified individually.  This is the third of the 8-values.  The
+		default for all eight values is fc00::2.
+
+config EXAMPLES_UDP_IPv6ADDR_4
+	hex "[3]"
+	default 0x0000
+	range 0x0 0xffff
+	---help---
+		Target IPv6 address.  This is a 16-bit integer value in host order.
+		Each of the eight values forming the full IP address must be
+		specified individually.  This is the fourth of the 8-values.  The
+		default for all eight values is fc00::2.
+
+config EXAMPLES_UDP_IPv6ADDR_5
+	hex "[4]"
+	default 0x0000
+	range 0x0 0xffff
+	---help---
+		Target IPv6 address.  This is a 16-bit integer value in host order.
+		Each of the eight values forming the full IP address must be
+		specified individually.  This is the fifth of the 8-values.  The
+		default for all eight values is fc00::2.
+
+config EXAMPLES_UDP_IPv6ADDR_6
+	hex "[5]"
+	default 0x0000
+	range 0x0 0xffff
+	---help---
+		Target IPv6 address.  This is a 16-bit integer value in host order.
+		Each of the eight values forming the full IP address must be
+		specified individually.  This is the sixth of the 8-values.  The
+		default for all eight values is fc00::2.
+
+config EXAMPLES_UDP_IPv6ADDR_7
+	hex "[6]"
+	default 0x0000
+	range 0x0 0xffff
+	---help---
+		Target IPv6 address.  This is a 16-bit integer value in host order.
+		Each of the eight values forming the full IP address must be
+		specified individually.  This is the seventh of the 8-values.  The
+		default for all eight values is fc00::2.
+
+config EXAMPLES_UDP_IPv6ADDR_8
+	hex "[7]"
+	default 0x0002
+	range 0x0 0xffff
+	---help---
+		Target IPv6 address.  This is a 16-bit integer value in host order.
+		Each of the eight values forming the full IP address must be
+		specified individually.  This is the last of the 8-values.  The
+		default for all eight values is fc00::2.
+
+comment "Router IPv6 address"
+
+config EXAMPLES_UDP_DRIPv6ADDR_1
+	hex "[0]"
+	default 0xfc00
+	range 0x0 0xffff
+	---help---
+		Default router IP address (aka, Gateway).  This is a 16-bit integer
+		value in host order.  Each of the eight values forming the full IP
+		address must be specified individually.  This is the first of the
+		8-values.  The default for all eight values is fc00::1.
+
+config EXAMPLES_UDP_DRIPv6ADDR_2
+	hex "[1]"
+	default 0x0000
+	range 0x0 0xffff
+	---help---
+		Default router IP address (aka, Gateway).  This is a 16-bit integer
+		value in host order.  Each of the eight values forming the full IP
+		address must be specified individually.  This is the second of the
+		8-values.  The default for all eight values is fc00::1.
+
+config EXAMPLES_UDP_DRIPv6ADDR_3
+	hex "[2]"
+	default 0x0000
+	range 0x0 0xffff
+	---help---
+		Default router IP address (aka, Gateway).  This is a 16-bit integer
+		value in host order.  Each of the eight values forming the full IP
+		address must be specified individually.  This is the third of the
+		8-values.  The default for all eight values is fc00::1.
+
+config EXAMPLES_UDP_DRIPv6ADDR_4
+	hex "[3]"
+	default 0x0000
+	range 0x0 0xffff
+	---help---
+		Default router IP address (aka, Gateway).  This is a 16-bit integer
+		value in host order.  Each of the eight values forming the full IP
+		address must be specified individually.  This is the fourth of the
+		8-values.  The default for all eight values is fc00::1.
+
+config EXAMPLES_UDP_DRIPv6ADDR_5
+	hex "[4]"
+	default 0x0000
+	range 0x0 0xffff
+	---help---
+		Default router IP address (aka, Gateway).  This is a 16-bit integer
+		value in host order.  Each of the eight values forming the full IP
+		address must be specified individually.  This is the fifth of the
+		8-values.  The default for all eight values is fc00::1.
+
+config EXAMPLES_UDP_DRIPv6ADDR_6
+	hex "[5]"
+	default 0x0000
+	range 0x0 0xffff
+	---help---
+		Default router IP address (aka, Gateway).  This is a 16-bit integer
+		value in host order.  Each of the eight values forming the full IP
+		address must be specified individually.  This is the sixth of the
+		8-values.  The default for all eight values is fc00::1.
+
+config EXAMPLES_UDP_DRIPv6ADDR_7
+	hex "[6]"
+	default 0x0000
+	range 0x0 0xffff
+	---help---
+		Default router IP address (aka, Gateway).  This is a 16-bit integer
+		value in host order.  Each of the eight values forming the full IP
+		address must be specified individually.  This is the seventh of the
+		8-values.  The default for all eight values is fc00::1.
+
+config EXAMPLES_UDP_DRIPv6ADDR_8
+	hex "[7]"
+	default 0x0001
+	range 0x0 0xffff
+	---help---
+		Default router IP address (aka, Gateway).  This is a 16-bit integer
+		value in host order.  Each of the eight values forming the full IP
+		address must be specified individually.  This is the last of the
+		8-values.  The default for all eight values is fc00::1.
+
+comment "IPv6 Network mask"
+
+config EXAMPLES_UDP_IPv6NETMASK_1
+	hex "[0]"
+	default 0xfe00
+	range 0x0 0xffff
+	---help---
+		Network mask.  This is a 16-bit integer value in host order.  Each
+		of the eight values forming the full IP address must be specified
+		individually.  This is the first of the 8-values.  The default for
+		all eight values is fe00::0.
+
+config EXAMPLES_UDP_IPv6NETMASK_2
+	hex "[1]"
+	default 0x0000
+	range 0x0 0xffff
+	---help---
+		Network mask.  This is a 16-bit integer value in host order.  Each
+		of the eight values forming the full IP address must be specified
+		individually.  This is the second of the 8-values.  The default for
+		all eight values is fe00::0.
+
+config EXAMPLES_UDP_IPv6NETMASK_3
+	hex "[2]"
+	default 0x0000
+	range 0x0 0xffff
+	---help---
+		Network mask.  This is a 16-bit integer value in host order.  Each
+		of the eight values forming the full IP address must be specified
+		individually.  This is the third of the 8-values.  The default for
+		all eight values is fe00::0.
+
+config EXAMPLES_UDP_IPv6NETMASK_4
+	hex "[3]"
+	default 0x0000
+	range 0x0 0x0000
+	---help---
+		Network mask.  This is a 16-bit integer value in host order.  Each
+		of the eight values forming the full IP address must be specified
+		individually.  This is the fourth of the 8-values.  The default for
+		all eight values is fe00::0.
+
+config EXAMPLES_UDP_IPv6NETMASK_5
+	hex "[4]"
+	default 0x0000
+	range 0x0 0xffff
+	---help---
+		Network mask.  This is a 16-bit integer value in host order.  Each
+		of the eight values forming the full IP address must be specified
+		individually.  This is the fifth of the 8-values.  The default for
+		all eight values is fe00::0.
+
+config EXAMPLES_UDP_IPv6NETMASK_6
+	hex "[5]"
+	default 0x0000
+	range 0x0 0xffff
+	---help---
+		Network mask.  This is a 16-bit integer value in host order.  Each
+		of the eight values forming the full IP address must be specified
+		individually.  This is the sixth of the 8-values.  The default for
+		all eight values is fe00::0.
+
+config EXAMPLES_UDP_IPv6NETMASK_7
+	hex "[6]"
+	default 0x0000
+	range 0x0 0xffff
+	---help---
+		Network mask.  This is a 16-bit integer value in host order.  Each
+		of the eight values forming the full IP address must be specified
+		individually.  This is the seventh of the 8-values.  The default for
+		all eight values is fe00::0.
+
+config EXAMPLES_UDP_IPv6NETMASK_8
+	hex "[7]"
+	default 0x0000
+	range 0x0 0xffff
+	---help---
+		Network mask.  This is a 16-bit integer value in host order.  Each
+		of the eight values forming the full IP address must be specified
+		individually.  This is the eighth of the 8-values.  The default for
+		all eight values is fe00::0.
+
+comment "Client IPv6 address"
+
+config EXAMPLES_UDP_SERVERIPv6ADDR_1
+	hex "[0]"
+	default 0xfc00
+	range 0x0 0xffff
+	---help---
+		IP address of the server.  If the target is the server, then
+		EXAMPLES_UDP_SERVERIP should be the same as
+		EXAMPLES_UDP_IPADDR (default).  If the target is the server,
+		then the default value of EXAMPLES_UDP_SERVERIP is set to the
+		host PC IP address (possibly the gateway address,
+		EXAMPLES_UDP_DRIPADDR?).
+
+		This is a 16-bit integer value in host order. Each of the eight
+		values forming the full IP address must be specified individually.
+		This is the first of the 8-values.
+
+config EXAMPLES_UDP_SERVERIPv6ADDR_2
+	hex "[1]"
+	default 0x0000
+	range 0x0 0xffff
+	---help---
+		IP address of the server.  If the target is the server, then
+		EXAMPLES_UDP_SERVERIP should be the same as
+		EXAMPLES_UDP_IPADDR (default).  If the target is the server,
+		then the default value of EXAMPLES_UDP_SERVERIP is set to the
+		host PC IP address (possibly the gateway address,
+		EXAMPLES_UDP_DRIPADDR?).
+
+		This is a 16-bit integer value in host order. Each of the eight
+		values forming the full IP address must be specified individually.
+		This is the second of the 8-values.
+
+config EXAMPLES_UDP_SERVERIPv6ADDR_3
+	hex "[2]"
+	default 0x0000
+	range 0x0 0xffff
+	---help---
+		IP address of the server.  If the target is the server, then
+		EXAMPLES_UDP_SERVERIP should be the same as
+		EXAMPLES_UDP_IPADDR (default).  If the target is the server,
+		then the default value of EXAMPLES_UDP_SERVERIP is set to the
+		host PC IP address (possibly the gateway address,
+		EXAMPLES_UDP_DRIPADDR?).
+
+		This is a 16-bit integer value in host order. Each of the eight
+		values forming the full IP address must be specified individually.
+		This is the Third of the 8-values.
+
+config EXAMPLES_UDP_SERVERIPv6ADDR_4
+	hex "[3]"
+	default 0x0000
+	range 0x0 0xffff
+	---help---
+		IP address of the server.  If the target is the server, then
+		EXAMPLES_UDP_SERVERIP should be the same as
+		EXAMPLES_UDP_IPADDR (default).  If the target is the server,
+		then the default value of EXAMPLES_UDP_SERVERIP is set to the
+		host PC IP address (possibly the gateway address,
+		EXAMPLES_UDP_DRIPADDR?).
+
+		This is a 16-bit integer value in host order. Each of the eight
+		values forming the full IP address must be specified individually.
+		This is the fourth of the 8-values.
+
+config EXAMPLES_UDP_SERVERIPv6ADDR_5
+	hex "[4]"
+	default 0x0000
+	range 0x0 0xffff
+	---help---
+		IP address of the server.  If the target is the server, then
+		EXAMPLES_UDP_SERVERIP should be the same as
+		EXAMPLES_UDP_IPADDR (default).  If the target is the server,
+		then the default value of EXAMPLES_UDP_SERVERIP is set to the
+		host PC IP address (possibly the gateway address,
+		EXAMPLES_UDP_DRIPADDR?).
+
+		This is a 16-bit integer value in host order. Each of the eight
+		values forming the full IP address must be specified individually.
+		This is the fifth of the 8-values.
+
+config EXAMPLES_UDP_SERVERIPv6ADDR_6
+	hex "[5]"
+	default 0x0000
+	range 0x0 0xffff
+	---help---
+		IP address of the server.  If the target is the server, then
+		EXAMPLES_UDP_SERVERIP should be the same as
+		EXAMPLES_UDP_IPADDR (default).  If the target is the server,
+		then the default value of EXAMPLES_UDP_SERVERIP is set to the
+		host PC IP address (possibly the gateway address,
+		EXAMPLES_UDP_DRIPADDR?).
+
+		This is a 16-bit integer value in host order. Each of the eight
+		values forming the full IP address must be specified individually.
+		This is the sixth of the 8-values.
+
+config EXAMPLES_UDP_SERVERIPv6ADDR_7
+	hex "[6]"
+	default 0x0000
+	range 0x0 0xffff
+	---help---
+		IP address of the server.  If the target is the server, then
+		EXAMPLES_UDP_SERVERIP should be the same as
+		EXAMPLES_UDP_IPADDR (default).  If the target is the server,
+		then the default value of EXAMPLES_UDP_SERVERIP is set to the
+		host PC IP address (possibly the gateway address,
+		EXAMPLES_UDP_DRIPADDR?).
+
+		This is a 16-bit integer value in host order. Each of the eight
+		values forming the full IP address must be specified individually.
+		This is the seventh of the 8-values.
+
+config EXAMPLES_UDP_SERVERIPv6ADDR_8
+	hex "[7]"
+	default 0x0001 if !EXAMPLES_UDP_SERVER
+	default 0x0002 if EXAMPLES_UDP_SERVER
+	range 0x0 0xffff
+	---help---
+		IP address of the server.  If the target is the server, then
+		EXAMPLES_UDP_SERVERIP should be the same as
+		EXAMPLES_UDP_IPADDR (default).  If the target is the server,
+		then the default value of EXAMPLES_UDP_SERVERIP is set to the
+		host PC IP address (possibly the gateway address,
+		EXAMPLES_UDP_DRIPADDR?).
+
+		This is a 16-bit integer value in host order. Each of the eight
+		values forming the full IP address must be specified individually.
+		This is the last of the 8-values.
+
+endif # EXAMPLES_UDP_IPv6
 endif # EXAMPLES_UDP

examples/udp/Makefile

@@ -70,11 +70,7 @@ else
 endif
 endif
 
-HOSTCFLAGS += -DCONFIG_EXAMPLES_UDP_HOST=1
+HOSTCFLAGS += -DEXAMPLES_UDP_HOST=1
-ifeq ($(CONFIG_EXAMPLES_UDP_SERVER),y)
-HOSTCFLAGS += -DCONFIG_EXAMPLES_UDP_SERVER=1 \
-              -DCONFIG_EXAMPLES_UDP_SERVERIP="$(CONFIG_EXAMPLES_UDP_SERVERIP)"
-endif
 
 HOST_SRCS = host.c
 ifeq ($(CONFIG_EXAMPLES_UDP_SERVER),y)
@@ -114,13 +110,18 @@ $(TARG_BIN): $(TARG_OBJS) $(HOST_BIN)
 	$(call ARCHIVE, $@, $(TARG_OBJS))
 
 $(HOST_OBJS): %.o: %.c
-	$(HOSTCC) -c $(HOSTCFLAGS) $< -o $@
+	@echo "CC:  $<"
+	$(Q) $(HOSTCC) -c $(HOSTCFLAGS) $< -o $@
 
-$(HOST_BIN): $(HOST_OBJS)
+config.h: $(TOPDIR)/include/nuttx/config.h
-	$(HOSTCC) $(HOSTLDFLAGS) $(HOST_OBJS) -o $@
+	@echo "CP:  $<"
+	$(Q) cp $< $@
 
-.built: $(TARG_BIN) $(HOST_BIN)
+$(HOST_BIN): config.h $(HOST_OBJS)
-	@touch .built
+	$(Q) $(HOSTCC) $(HOSTLDFLAGS) $(HOST_OBJS) -o $@
+
+.built: config.h $(TARG_BIN) $(HOST_BIN)
+	$(Q) touch .built
 
 ifeq ($(CONFIG_BUILD_KERNEL),y)
 $(BIN_DIR)$(DELIM)$(PROGNAME): $(OBJS) $(TARG_MAINOBJ)
@@ -148,6 +149,7 @@ clean:
 	$(call DELFILE, $(TARG_BIN))
 	$(call DELFILE, $(HOST_BIN))
 	$(call DELFILE, *.dSYM)
+	$(call DELFILE, config.h)
 	$(call CLEAN)
 
 distclean: clean

examples/udp/host.c

@@ -37,6 +37,7 @@
  * Included Files
  ****************************************************************************/
 
+#include "config.h"
 #include "udp-internal.h"
 
 /****************************************************************************

examples/udp/target.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * examples/udp/target.c
  *
- *   Copyright (C) 2007, 2011 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2007, 2011, 2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -37,7 +37,8 @@
  * Included Files
  ****************************************************************************/
 
-#include <nuttx/config.h>
+#include "config.h"
+
 #include <stdio.h>
 #include <debug.h>
 
@@ -56,6 +57,50 @@
  * Private Data
  ****************************************************************************/
 
+#ifdef CONFIG_EXAMPLES_UDP_IPv6
+/* Our host IPv6 address */
+
+static const uint16_t g_ipv6_hostaddr[8] =
+{
+  HTONS(CONFIG_EXAMPLES_UDP_IPv6ADDR_1),
+  HTONS(CONFIG_EXAMPLES_UDP_IPv6ADDR_2),
+  HTONS(CONFIG_EXAMPLES_UDP_IPv6ADDR_3),
+  HTONS(CONFIG_EXAMPLES_UDP_IPv6ADDR_4),
+  HTONS(CONFIG_EXAMPLES_UDP_IPv6ADDR_5),
+  HTONS(CONFIG_EXAMPLES_UDP_IPv6ADDR_6),
+  HTONS(CONFIG_EXAMPLES_UDP_IPv6ADDR_7),
+  HTONS(CONFIG_EXAMPLES_UDP_IPv6ADDR_8),
+};
+
+/* Default routine IPv6 address */
+
+static const uint16_t g_ipv6_draddr[8] =
+{
+  HTONS(CONFIG_EXAMPLES_UDP_DRIPv6ADDR_1),
+  HTONS(CONFIG_EXAMPLES_UDP_DRIPv6ADDR_2),
+  HTONS(CONFIG_EXAMPLES_UDP_DRIPv6ADDR_3),
+  HTONS(CONFIG_EXAMPLES_UDP_DRIPv6ADDR_4),
+  HTONS(CONFIG_EXAMPLES_UDP_DRIPv6ADDR_5),
+  HTONS(CONFIG_EXAMPLES_UDP_DRIPv6ADDR_6),
+  HTONS(CONFIG_EXAMPLES_UDP_DRIPv6ADDR_7),
+  HTONS(CONFIG_EXAMPLES_UDP_DRIPv6ADDR_8),
+};
+
+/* IPv6 netmask */
+
+static const uint16_t g_ipv6_netmask[8] =
+{
+  HTONS(CONFIG_EXAMPLES_UDP_IPv6NETMASK_1),
+  HTONS(CONFIG_EXAMPLES_UDP_IPv6NETMASK_2),
+  HTONS(CONFIG_EXAMPLES_UDP_IPv6NETMASK_3),
+  HTONS(CONFIG_EXAMPLES_UDP_IPv6NETMASK_4),
+  HTONS(CONFIG_EXAMPLES_UDP_IPv6NETMASK_5),
+  HTONS(CONFIG_EXAMPLES_UDP_IPv6NETMASK_6),
+  HTONS(CONFIG_EXAMPLES_UDP_IPv6NETMASK_7),
+  HTONS(CONFIG_EXAMPLES_UDP_IPv6NETMASK_8),
+};
+#endif /* CONFIG_EXAMPLES_UDP_IPv6 */
+
 /****************************************************************************
  * Public Functions
  ****************************************************************************/
@@ -70,6 +115,22 @@ int main(int argc, FAR char *argv[])
 int udp_main(int argc, char *argv[])
 #endif
 {
+#ifdef CONFIG_EXAMPLES_UDP_IPv6
+  /* Set up our host address */
+
+  netlib_set_ipv6addr("eth0",
+                      (FAR const struct in6_addr *)g_ipv6_hostaddr);
+
+  /* Set up the default router address */
+
+  netlib_set_dripv6addr("eth0",
+                        (FAR const struct in6_addr *)g_ipv6_draddr);
+
+  /* Setup the subnet mask */
+
+  netlib_set_ipv6netmask("eth0",
+                        (FAR const struct in6_addr *)g_ipv6_netmask);
+#else
   struct in_addr addr;
 
   /* Set up our host address */
@@ -86,6 +147,7 @@ int udp_main(int argc, char *argv[])
 
   addr.s_addr = HTONL(CONFIG_EXAMPLES_UDP_NETMASK);
   netlib_set_ipv4netmask("eth0", &addr);
+#endif
 
 #ifdef CONFIG_EXAMPLES_UDP_SERVER
   recv_server();

examples/udp/udp-client.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * examples/udp/udp-client.c
  *
- *   Copyright (C) 2007 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2007, 2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -37,6 +37,8 @@
  * Included Files
  ****************************************************************************/
 
+#include "config.h"
+
 #include <sys/types.h>
 #include <sys/socket.h>
 
@@ -77,15 +79,20 @@ static inline void fill_buffer(unsigned char *buf, int offset)
 
 void send_client(void)
 {
+#ifdef CONFIG_EXAMPLES_UDP_IPv6
+  struct sockaddr_in6 server;
+#else
   struct sockaddr_in server;
+#endif
   unsigned char outbuf[SENDSIZE];
+  socklen_t addrlen;
   int sockfd;
   int nbytes;
   int offset;
 
   /* Create a new UDP socket */
 
-  sockfd = socket(PF_INET, SOCK_DGRAM, 0);
+  sockfd = socket(PF_INETX, SOCK_DGRAM, 0);
   if (sockfd < 0)
     {
       printf("client socket failure %d\n", errno);
@@ -100,15 +107,35 @@ void send_client(void)
 
       fill_buffer(outbuf, offset);
 
-      /* Send the message */
+      /* Set up the server address */
 
+#ifdef CONFIG_EXAMPLES_UDP_IPv6
+      server.sin6_family            = AF_INET6;
+      server.sin6_port              = HTONS(PORTNO);
+
+      server.sin6_addr.s6_addr16[0] = HTONS(CONFIG_EXAMPLES_UDP_SERVERIPv6ADDR_1);
+      server.sin6_addr.s6_addr16[1] = HTONS(CONFIG_EXAMPLES_UDP_SERVERIPv6ADDR_2);
+      server.sin6_addr.s6_addr16[2] = HTONS(CONFIG_EXAMPLES_UDP_SERVERIPv6ADDR_3);
+      server.sin6_addr.s6_addr16[3] = HTONS(CONFIG_EXAMPLES_UDP_SERVERIPv6ADDR_4);
+      server.sin6_addr.s6_addr16[4] = HTONS(CONFIG_EXAMPLES_UDP_SERVERIPv6ADDR_5);
+      server.sin6_addr.s6_addr16[5] = HTONS(CONFIG_EXAMPLES_UDP_SERVERIPv6ADDR_6);
+      server.sin6_addr.s6_addr16[6] = HTONS(CONFIG_EXAMPLES_UDP_SERVERIPv6ADDR_7);
+      server.sin6_addr.s6_addr16[7] = HTONS(CONFIG_EXAMPLES_UDP_SERVERIPv6ADDR_8);
+
+      addrlen                       = sizeof(struct sockaddr_in6);
+#else
       server.sin_family             = AF_INET;
       server.sin_port               = HTONS(PORTNO);
       server.sin_addr.s_addr        = HTONL(CONFIG_EXAMPLES_UDP_SERVERIP);
 
+      addrlen                       = sizeof(struct sockaddr_in);
+#endif
+
+      /* Send the message */
+
       printf("client: %d. Sending %d bytes\n", offset, SENDSIZE);
       nbytes = sendto(sockfd, outbuf, SENDSIZE, 0,
-                      (struct sockaddr*)&server, sizeof(struct sockaddr_in));
+                      (struct sockaddr*)&server, addrlen);
       printf("client: %d. Sent %d bytes\n", offset, nbytes);
 
       if (nbytes < 0)

examples/udp/udp-internal.h

@@ -1,7 +1,7 @@
 /****************************************************************************
  * examples/udp/udp-internal.h
  *
- *   Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2007, 2008, 2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -40,7 +40,7 @@
  * Included Files
  ****************************************************************************/
 
-#ifdef CONFIG_EXAMPLES_UDP_HOST
+#ifdef EXAMPLES_UDP_HOST
 #else
 # include <debug.h>
 #endif
@@ -51,13 +51,21 @@
  * Definitions
  ****************************************************************************/
 
-#ifdef CONFIG_EXAMPLES_UDP_HOST
+#ifdef EXAMPLES_UDP_HOST
    /* HTONS/L macros are unique to uIP */
 
 #  define HTONS(a)       htons(a)
 #  define HTONL(a)       htonl(a)
 #endif
 
+#ifdef CONFIG_EXAMPLES_UDP_IPv6
+#  define AF_INETX AF_INET6
+#  define PF_INETX PF_INET6
+#else
+#  define AF_INETX AF_INET
+#  define PF_INETX PF_INET
+#endif
+
 #define PORTNO     5471
 
 #define ASCIISIZE  (0x7f - 0x20)

examples/udp/udp-server.c

@@ -1,7 +1,7 @@
 /****************************************************************************
  * examples/udp/udp-server.c
  *
- *   Copyright (C) 2007, 2009, 2012 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2007, 2009, 2012, 2015 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *
  * Redistribution and use in source and binary forms, with or without
@@ -37,12 +37,15 @@
  * Included Files
  ****************************************************************************/
 
+#include "config.h"
+
 #include <sys/socket.h>
 #include <netinet/in.h>
 
 #include <stdio.h>
 #include <stdlib.h>
 #include <unistd.h>
+#include <string.h>
 #include <errno.h>
 
 #include <arpa/inet.h>
@@ -73,6 +76,7 @@ static inline int check_buffer(unsigned char *buf)
           ret = 0;
         }
     }
+
   return ret;
 }
 
@@ -82,19 +86,25 @@ static inline int check_buffer(unsigned char *buf)
 
 void recv_server(void)
 {
+#ifdef CONFIG_EXAMPLES_UDP_IPv6
+  struct sockaddr_in6 server;
+  struct sockaddr_in6 client;
+#else
   struct sockaddr_in server;
   struct sockaddr_in client;
   in_addr_t tmpaddr;
+#endif
   unsigned char inbuf[1024];
+  socklen_t addrlen;
+  socklen_t recvlen;
   int sockfd;
   int nbytes;
   int optval;
   int offset;
-  socklen_t addrlen;
 
   /* Create a new UDP socket */
 
-  sockfd = socket(PF_INET, SOCK_DGRAM, 0);
+  sockfd = socket(PF_INETX, SOCK_DGRAM, 0);
   if (sockfd < 0)
     {
       printf("server: socket failure: %d\n", errno);
@@ -112,11 +122,21 @@ void recv_server(void)
 
   /* Bind the socket to a local address */
 
+#ifdef CONFIG_EXAMPLES_UDP_IPv6
+  server.sin6_family     = AF_INET6;
+  server.sin6_port       = HTONS(PORTNO);
+  memset(&server.sin6_addr, 0, sizeof(struct in6_addr));
+
+  addrlen                = sizeof(struct sockaddr_in6);
+#else
   server.sin_family      = AF_INET;
   server.sin_port        = HTONS(PORTNO);
-  server.sin_addr.s_addr = HTONL(INADDR_ANY);
+  server.sin_addr.s_addr = HTONL(INADDR_ANY);;
 
-  if (bind(sockfd, (struct sockaddr*)&server, sizeof(struct sockaddr_in)) < 0)
+  addrlen                = sizeof(struct sockaddr_in);
+#endif
+
+  if (bind(sockfd, (struct sockaddr*)&server, addrlen) < 0)
     {
       printf("server: bind failure: %d\n", errno);
       exit(1);
@@ -127,17 +147,26 @@ void recv_server(void)
   for (offset = 0; offset < 256; offset++)
     {
       printf("server: %d. Receiving up 1024 bytes\n", offset);
-      addrlen = sizeof(struct sockaddr_in);
+      recvlen = addrlen;
       nbytes = recvfrom(sockfd, inbuf, 1024, 0,
-                        (struct sockaddr*)&client, &addrlen);
+                        (struct sockaddr*)&client, &recvlen);
 
+#ifdef CONFIG_EXAMPLES_UDP_IPv6
+      printf("server: %d. Received %d bytes from %04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x port %d\n",
+             offset, nbytes,
+             client.sin6_addr.s6_addr16[0], client.sin6_addr.s6_addr16[1],
+             client.sin6_addr.s6_addr16[2], client.sin6_addr.s6_addr16[3],
+             client.sin6_addr.s6_addr16[4], client.sin6_addr.s6_addr16[5],
+             client.sin6_addr.s6_addr16[6], client.sin6_addr.s6_addr16[7],
+             ntohs(client.sin6_port));
+#else
       tmpaddr = ntohl(client.sin_addr.s_addr);
       printf("server: %d. Received %d bytes from %d.%d.%d.%d:%d\n",
              offset, nbytes,
              tmpaddr >> 24, (tmpaddr >> 16) & 0xff,
              (tmpaddr >> 8) & 0xff, tmpaddr & 0xff,
              ntohs(client.sin_port));
-
+#endif
       if (nbytes < 0)
         {
           printf("server: %d. recv failed: %d\n", offset, errno);