Standardize nameing of the pre-processor definitiongs group header

2015-10-02 14:06:11 -06:00 · 2015-10-02 14:06:11 -06:00 · e9447c6058
commit e9447c6058
parent 658165cdd5
85 changed files with 85 additions and 85 deletions
--- a/examples/adc/adc.h
+++ b/examples/adc/adc.h
@ -43,7 +43,7 @@
 #include <nuttx/config.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/
 /* Configuration ************************************************************/
 /* CONFIG_NSH_BUILTIN_APPS - Build the ADC test as an NSH built-in function.
--- a/examples/can/can.h
+++ b/examples/can/can.h
@ -43,7 +43,7 @@
 #include <nuttx/config.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/
 /* Configuration ************************************************************/
 /* This test depends on these specific CAN configurations settings (your
--- a/examples/cc3000/shell.c
+++ b/examples/cc3000/shell.c
@ -54,7 +54,7 @@
 #include <apps/nsh.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /****************************************************************************
--- a/examples/configdata/configdata_main.c
+++ b/examples/configdata/configdata_main.c
@ -55,7 +55,7 @@
 #include <sys/ioctl.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/
 /* Configuration ************************************************************/
 /* The default is to use the RAM MTD device at drivers/mtd/rammtd.c.  But
--- a/examples/elf/elf_main.c
+++ b/examples/elf/elf_main.c
@ -59,7 +59,7 @@
 #include "tests/dirlist.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /* Check configuration.  This is not all of the configuration settings that
--- a/examples/elf/tests/signal/signal.c
+++ b/examples/elf/tests/signal/signal.c
@ -47,7 +47,7 @@
 #include <errno.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 #define USEC_PER_MSEC 1000
--- a/examples/ftpc/ftpc.h
+++ b/examples/ftpc/ftpc.h
@ -52,7 +52,7 @@
 #include <apps/ftpc.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /* Maximum size of one command line */
--- a/examples/hello/hello_main.c
+++ b/examples/hello/hello_main.c
@ -41,7 +41,7 @@
 #include <stdio.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /****************************************************************************
--- a/examples/i2schar/i2schar.h
+++ b/examples/i2schar/i2schar.h
@ -44,7 +44,7 @@
 #include <pthread.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/
 /* Configuration ************************************************************/
 /* CONFIG_NSH_BUILTIN_APPS - Build the I2SCHAR test as an NSH built-in
--- a/examples/igmp/igmp.c
+++ b/examples/igmp/igmp.c
@ -54,7 +54,7 @@
 #include "igmp.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /* Check if the destination address is a multicast address
--- a/examples/keypadtest/keypadtest_main.c
+++ b/examples/keypadtest/keypadtest_main.c
@ -58,7 +58,7 @@
 #endif

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/
 /* Configuration ************************************************************/

--- a/examples/lcdrw/lcdrw_main.c
+++ b/examples/lcdrw/lcdrw_main.c
@ -47,7 +47,7 @@
 #include <nuttx/nx/nxglib.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/
 /* Configuration ************************************************************/
 /* Most of the NX configuration settings are probably *not* needed by this
--- a/examples/modbus/modbus_main.c
+++ b/examples/modbus/modbus_main.c
@ -72,7 +72,7 @@
 #include <apps/modbus/mbport.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/
 /* Configuration ************************************************************/

--- a/examples/mount/mount.h
+++ b/examples/mount/mount.h
@ -43,7 +43,7 @@
 #include <nuttx/config.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /* Configure the test */
--- a/examples/mount/mount_main.c
+++ b/examples/mount/mount_main.c
@ -52,7 +52,7 @@
 #include "mount.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 #define TEST_USE_STAT         1
--- a/examples/mtdpart/mtdpart_main.c
+++ b/examples/mtdpart/mtdpart_main.c
@ -51,7 +51,7 @@
 #include <nuttx/fs/ioctl.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/
 /* Configuration ************************************************************/
 /* Make sure that support for MTD partitions is enabled */
--- a/examples/nettest/nettest.c
+++ b/examples/nettest/nettest.c
@ -57,7 +57,7 @@
 #include "nettest.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /****************************************************************************
--- a/examples/null/null_main.c
+++ b/examples/null/null_main.c
@ -40,7 +40,7 @@
 #include <nuttx/config.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /****************************************************************************
--- a/examples/nx/nx_events.c
+++ b/examples/nx/nx_events.c
@ -52,7 +52,7 @@
 #include "nx_internal.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /****************************************************************************
--- a/examples/nx/nx_internal.h
+++ b/examples/nx/nx_internal.h
@ -51,7 +51,7 @@
 #include <nuttx/nx/nxfonts.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /* Configuration ************************************************************/
--- a/examples/nx/nx_kbdin.c
+++ b/examples/nx/nx_kbdin.c
@ -56,7 +56,7 @@
 #ifdef CONFIG_NX_KBD

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /* Select renderer -- Some additional logic would be required to support
--- a/examples/nxffs/nxffs_main.c
+++ b/examples/nxffs/nxffs_main.c
@ -56,7 +56,7 @@
 #include <nuttx/fs/nxffs.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/
 /* Configuration ************************************************************/
 /* The default is to use the RAM MTD device at drivers/mtd/rammtd.c.  But
--- a/examples/nxflat/nxflat_main.c
+++ b/examples/nxflat/nxflat_main.c
@ -58,7 +58,7 @@
 #include "tests/symtab.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /* Check configuration.  This is not all of the configuration settings that
--- a/examples/nxflat/tests/signal/signal.c
+++ b/examples/nxflat/tests/signal/signal.c
@ -47,7 +47,7 @@
 #include <errno.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 #define USEC_PER_MSEC 1000
--- a/examples/nxhello/nxhello.h
+++ b/examples/nxhello/nxhello.h
@ -51,7 +51,7 @@
 #include <nuttx/nx/nxfonts.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /* Configuration ************************************************************/
--- a/examples/nxhello/nxhello_bkgd.c
+++ b/examples/nxhello/nxhello_bkgd.c
@ -55,7 +55,7 @@
 #include "nxhello.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /* Select renderer -- Some additional logic would be required to support
--- a/examples/nximage/nximage.h
+++ b/examples/nximage/nximage.h
@ -50,7 +50,7 @@
 #include <nuttx/nx/nxglib.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /* Configuration ************************************************************/
--- a/examples/nximage/nximage_bkgd.c
+++ b/examples/nximage/nximage_bkgd.c
@ -55,7 +55,7 @@
 #include "nximage.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /* Select renderer -- Some additional logic would be required to support
--- a/examples/nxlines/nxlines.h
+++ b/examples/nxlines/nxlines.h
@ -51,7 +51,7 @@
 #include <nuttx/video/rgbcolors.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /* Configuration ************************************************************/
--- a/examples/nxterm/nxterm_internal.h
+++ b/examples/nxterm/nxterm_internal.h
@ -54,7 +54,7 @@
 #include <nuttx/nx/nxterm.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/
 /* Configuration ************************************************************/
 /* Need NX graphics support */
--- a/examples/nxterm/nxterm_toolbar.c
+++ b/examples/nxterm/nxterm_toolbar.c
@ -54,7 +54,7 @@
 #include "nxterm_internal.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /****************************************************************************
--- a/examples/nxterm/nxterm_wndo.c
+++ b/examples/nxterm/nxterm_wndo.c
@ -55,7 +55,7 @@
 #include "nxterm_internal.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /****************************************************************************
--- a/examples/nxtext/nxtext_bkgd.c
+++ b/examples/nxtext/nxtext_bkgd.c
@ -54,7 +54,7 @@
 #include "nxtext_internal.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /****************************************************************************
--- a/examples/nxtext/nxtext_internal.h
+++ b/examples/nxtext/nxtext_internal.h
@ -51,7 +51,7 @@
 #include <nuttx/nx/nxfonts.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /* Configuration ************************************************************/
--- a/examples/nxtext/nxtext_popup.c
+++ b/examples/nxtext/nxtext_popup.c
@ -53,7 +53,7 @@
 #include "nxtext_internal.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 #define NBM_CACHE    8
--- a/examples/nxtext/nxtext_putc.c
+++ b/examples/nxtext/nxtext_putc.c
@ -54,7 +54,7 @@
 #include "nxtext_internal.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /* Select renderer -- Some additional logic would be required to support
--- a/examples/ostest/barrier.c
+++ b/examples/ostest/barrier.c
@ -44,7 +44,7 @@
 #include "ostest.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 #define HALF_SECOND 500000L
--- a/examples/ostest/ostest.h
+++ b/examples/ostest/ostest.h
@ -43,7 +43,7 @@
 #include <nuttx/config.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /* The task_create task size can be specified in the defconfig file */
--- a/examples/ostest/ostest_main.c
+++ b/examples/ostest/ostest_main.c
@ -58,7 +58,7 @@
 #include "ostest.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 #define PRIORITY         100
--- a/examples/ostest/prioinherit.c
+++ b/examples/ostest/prioinherit.c
@ -52,7 +52,7 @@
 #if defined(CONFIG_PRIORITY_INHERITANCE) && !defined(CONFIG_DISABLE_SIGNALS) && !defined(CONFIG_DISABLE_PTHREAD)

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 #ifndef CONFIG_SEM_PREALLOCHOLDERS
--- a/examples/pashello/pashello.c
+++ b/examples/pashello/pashello.c
@ -48,7 +48,7 @@
 #include "pashello.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 #ifndef CONFIG_EXAMPLES_PASHELLO_VARSTACKSIZE
--- a/examples/pashello/pashello.h
+++ b/examples/pashello/pashello.h
@ -41,7 +41,7 @@
 ****************************************************************************/

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /****************************************************************************
--- a/examples/pipe/interlock_test.c
+++ b/examples/pipe/interlock_test.c
@ -50,7 +50,7 @@
 #include "pipe.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /****************************************************************************
--- a/examples/pipe/pipe.h
+++ b/examples/pipe/pipe.h
@ -45,7 +45,7 @@
 ****************************************************************************/

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 #define FIFO_PATH1 "/tmp/testfifo-1"
--- a/examples/pipe/pipe_main.c
+++ b/examples/pipe/pipe_main.c
@ -49,7 +49,7 @@
 #include "pipe.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /****************************************************************************
--- a/examples/pipe/redirect_test.c
+++ b/examples/pipe/redirect_test.c
@ -49,7 +49,7 @@
 #include "pipe.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 #define READ_SIZE 37
--- a/examples/posix_spawn/spawn_main.c
+++ b/examples/posix_spawn/spawn_main.c
@ -58,7 +58,7 @@
 #include "filesystem/romfs.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /* Check configuration.  This is not all of the configuration settings that
--- a/examples/pwm/pwm.h
+++ b/examples/pwm/pwm.h
@ -43,7 +43,7 @@
 #include <nuttx/config.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/
 /* Configuration ************************************************************/
 /* CONFIG_NSH_BUILTIN_APPS - Build the PWM test as an NSH built-in function.
--- a/examples/qencoder/qe.h
+++ b/examples/qencoder/qe.h
@ -43,7 +43,7 @@
 #include <nuttx/config.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/
 /* Configuration ************************************************************/
 /* CONFIG_NSH_BUILTIN_APPS - Build the QE test as an NSH built-in function.
--- a/examples/relays/relays_main.c
+++ b/examples/relays/relays_main.c
@ -54,7 +54,7 @@
 #ifdef CONFIG_ARCH_RELAYS

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 #ifndef CONFIG_EXAMPLES_RELAYS_NRELAYS
--- a/examples/rgmp/rgmp_main.c
+++ b/examples/rgmp/rgmp_main.c
@ -42,7 +42,7 @@
 #include <string.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /****************************************************************************
--- a/examples/serloop/serloop_main.c
+++ b/examples/serloop/serloop_main.c
@ -44,7 +44,7 @@
 #include <unistd.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /****************************************************************************
--- a/examples/smart/smart_main.c
+++ b/examples/smart/smart_main.c
@ -58,7 +58,7 @@
 #include <nuttx/fs/mksmartfs.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/
 /* Configuration ************************************************************/
 /* The default is to use the RAM MTD device at drivers/mtd/rammtd.c.  But
--- a/examples/telnetd/telnetd.c
+++ b/examples/telnetd/telnetd.c
@ -54,7 +54,7 @@
 #include "telnetd.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /****************************************************************************
--- a/examples/thttpd/thttpd_main.c
+++ b/examples/thttpd/thttpd_main.c
@ -80,7 +80,7 @@
 #endif

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /* Check configuration.  This is not all of the configuration settings that
--- a/examples/touchscreen/tc.h
+++ b/examples/touchscreen/tc.h
@ -43,7 +43,7 @@
 #include <nuttx/config.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/
 /* Configuration ************************************************************/
 /* CONFIG_NSH_BUILTIN_APPS - Build the touchscreen test as
--- a/examples/udp/udp-internal.h
+++ b/examples/udp/udp-internal.h
@ -48,7 +48,7 @@
 #include <arpa/inet.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 #ifdef EXAMPLES_UDP_HOST
--- a/examples/udpblaster/udpblaster_target.c
+++ b/examples/udpblaster/udpblaster_target.c
@ -52,7 +52,7 @@
 #include "udpblaster.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /****************************************************************************
--- a/examples/watchdog/watchdog.h
+++ b/examples/watchdog/watchdog.h
@ -43,7 +43,7 @@
 #include <nuttx/config.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/
 /* Configuration ************************************************************/
 /* CONFIG_NSH_BUILTIN_APPS - Build the WATCHDOG test as an NSH built-in
--- a/examples/wgetjson/wgetjson_main.c
+++ b/examples/wgetjson/wgetjson_main.c
@ -54,7 +54,7 @@
 #include <apps/netutils/cJSON.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 #ifndef CONFIG_EXAMPLES_WGETJSON_MAXSIZE
--- a/netutils/dhcpc/dhcpc.c
+++ b/netutils/dhcpc/dhcpc.c
@ -58,7 +58,7 @@
 #include <apps/netutils/netlib.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 #define STATE_INITIAL           0
--- a/netutils/webclient/webclient.c
+++ b/netutils/webclient/webclient.c
@ -96,7 +96,7 @@
 #endif

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 #ifndef CONFIG_WEBCLIENT_TIMEOUT
--- a/nshlib/nsh.h
+++ b/nshlib/nsh.h
@ -57,7 +57,7 @@
 #include <nuttx/usb/usbdev_trace.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/
 /* Configuration ************************************************************/
 /* The background commands require pthread support */
--- a/nshlib/nsh_builtin.c
+++ b/nshlib/nsh_builtin.c
@ -63,7 +63,7 @@
 #ifdef CONFIG_NSH_BUILTIN_APPS

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /****************************************************************************
--- a/nshlib/nsh_dbgcmds.c
+++ b/nshlib/nsh_dbgcmds.c
@ -54,7 +54,7 @@
 #include "nsh_console.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /****************************************************************************
--- a/nshlib/nsh_envcmds.c
+++ b/nshlib/nsh_envcmds.c
@ -50,7 +50,7 @@
 #include "nsh_console.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /****************************************************************************
--- a/nshlib/nsh_fileapps.c
+++ b/nshlib/nsh_fileapps.c
@ -54,7 +54,7 @@
 #ifdef CONFIG_NSH_FILE_APPS

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /****************************************************************************
--- a/nshlib/nsh_fscmds.c
+++ b/nshlib/nsh_fscmds.c
@ -82,7 +82,7 @@
 #include "nsh_console.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 #define LSFLAGS_SIZE          1
--- a/nshlib/nsh_init.c
+++ b/nshlib/nsh_init.c
@ -47,7 +47,7 @@
 #include "nsh.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /****************************************************************************
--- a/nshlib/nsh_mmcmds.c
+++ b/nshlib/nsh_mmcmds.c
@ -45,7 +45,7 @@
 #include "nsh_console.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /****************************************************************************
--- a/nshlib/nsh_mntcmds.c
+++ b/nshlib/nsh_mntcmds.c
@ -59,7 +59,7 @@
 #include "nsh_console.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /****************************************************************************
--- a/nshlib/nsh_romfsetc.c
+++ b/nshlib/nsh_romfsetc.c
@ -62,7 +62,7 @@
 #endif

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /****************************************************************************
--- a/nshlib/nsh_script.c
+++ b/nshlib/nsh_script.c
@ -45,7 +45,7 @@
 #if  CONFIG_NFILE_DESCRIPTORS > 0 && CONFIG_NFILE_STREAMS > 0 && !defined(CONFIG_NSH_DISABLESCRIPT)

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /****************************************************************************
--- a/nshlib/nsh_test.c
+++ b/nshlib/nsh_test.c
@ -74,7 +74,7 @@
 #if !defined(CONFIG_NSH_DISABLESCRIPT) && !defined(CONFIG_NSH_DISABLE_TEST)

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 #define TEST_TRUE  OK
--- a/nshlib/nsh_timcmds.c
+++ b/nshlib/nsh_timcmds.c
@ -48,7 +48,7 @@
 #include "nsh_console.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 #define MAX_TIME_STRING 80
--- a/platform/mikroe-stm32f4/mikroe_configdata.c
+++ b/platform/mikroe-stm32f4/mikroe_configdata.c
@ -53,7 +53,7 @@
 #ifdef CONFIG_PLATFORM_CONFIGDATA

 /************************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ************************************************************************************/

 /************************************************************************************
--- a/system/i2c/i2c_bus.c
+++ b/system/i2c/i2c_bus.c
@ -44,7 +44,7 @@
 #include "i2ctool.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /****************************************************************************
--- a/system/i2c/i2c_common.c
+++ b/system/i2c/i2c_common.c
@ -44,7 +44,7 @@
 #include "i2ctool.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /****************************************************************************
--- a/system/i2c/i2c_dev.c
+++ b/system/i2c/i2c_dev.c
@ -46,7 +46,7 @@
 #include "i2ctool.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /****************************************************************************
--- a/system/i2c/i2c_set.c
+++ b/system/i2c/i2c_set.c
@ -46,7 +46,7 @@
 #include "i2ctool.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /****************************************************************************
--- a/system/i2c/i2c_verf.c
+++ b/system/i2c/i2c_verf.c
@ -46,7 +46,7 @@
 #include "i2ctool.h"

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /****************************************************************************
--- a/system/i2c/i2ctool.h
+++ b/system/i2c/i2ctool.h
@ -52,7 +52,7 @@
 #include <nuttx/i2c.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/
 /* Configuration ************************************************************/
 /* CONFIG_NSH_BUILTIN_APPS - Build the tools as an NSH built-in command
--- a/system/mdio/mdio_main.c
+++ b/system/mdio/mdio_main.c
@ -52,7 +52,7 @@
 #include <arpa/inet.h>

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 #define CONFIG_HELLO_IPADDR     0xc0a8eacd
--- a/system/prun/prun.h
+++ b/system/prun/prun.h
@ -41,7 +41,7 @@
 ****************************************************************************/

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /****************************************************************************
--- a/system/zmodem/host/nuttx/compiler.h
+++ b/system/zmodem/host/nuttx/compiler.h
@ -41,7 +41,7 @@
 ****************************************************************************/

 /****************************************************************************
- * Definitions
+ * Pre-processor Definitions
 ****************************************************************************/

 /* GCC-specific definitions *************************************************/