Gregory Nutt
064d4024e4
apps/examples/popen: Add a test of popen/pclose. apps/system/popen: Fix some errors found using the new popen/pclose test.
2018-08-17 14:25:33 -06:00
Gregory Nutt
f198e32c17
apps/system/popen: Add an implementation of the standard popen() and pclose() OS interfaces. These are implementated as applications vs. part of the OS because they depend on NSH. Untested on initial commit.
2018-08-17 10:45:06 -06:00
Gregory Nutt
a89f0e3a07
Add missing function names in function headers.
2018-08-13 15:52:59 -06:00
Gregory Nutt
a57610c2c4
Remove trailing spaces at the end of lines.
2018-08-13 07:47:26 -06:00
mst
62134a0419
apps/system/cle: Usage improvements including command line history (taken from readline) and support for addition control characters.
2018-08-05 16:05:59 -06:00
Gregory Nutt
a1e5bf6bf3
apps/system/i2c: Adapt to rename I2C_M_RESTART->i2C_M_START. I2C_M_NOSTOP should be in flags of first message in every write-read and write-write mesage sequence.
2018-08-03 08:47:10 -06:00
Masayuki Ishikawa
d9cb9175ac
Merged in masayuki2009/nuttx.apps/refactor_nxplayer (pull request #149 )
...
nxplayer: Refactor nxplayer.c
Apply netlib_parsehttpurl() and remove unnecessary usleep().
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Approved-by: GregoryN <gnutt@nuttx.org>
2018-07-31 12:16:31 +00:00
Masayuki Ishikawa
67e6e330a8
Merged in masayuki2009/nuttx.apps/taskset_command (pull request #140 )
...
apps/system/taskset: Add taskset command for SMP systems
This command can be used to retrieve or set a process's CPU affinity.
For example,
nsh> taskset -p 4
pid 4's current affinity mask: 2
nsh> taskset -p 3 4
pid 4's current affinity mask: 3
nsh> taskset -p 1 busyloop &
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-06-08 13:24:03 +00:00
Gregory Nutt
634dd7709b
apps/, Various Makefiles: Fix mixed references to nuttx/lib. These need to be changed to nuttx/staging.
2018-05-30 11:08:13 -06:00
Gregory Nutt
06dae98ce2
Fix some trivial typos. Add a comment to a C file.
2018-05-28 08:01:18 -06:00
Gregory Nutt
63db94efbc
Update README
2018-05-28 07:46:24 -06:00
Gregory Nutt
430a088784
Update README
2018-05-27 17:10:57 -06:00
Gregory Nutt
dd59d4f946
Update a readme and some comments.
2018-05-27 15:13:19 -06:00
Gregory Nutt
b84f5841d5
apps/system/zmodem: Call tcflush() before closing the serial port. This is necessary because that close operation may hang if hardware flow control is enabled. Consider this scenario: After the host sz runs on the host, it exits and leaves CTS high. The target rz completes, and tries to close the serial port. But if there is buffered Tx data, then the close will hang when it tries to drain the buffered Tx data since there is no where it can go. tcflush() discards the buffered data and permits the close to continue. There additional logic in nuttx/drivers/serial needed tow work with this.
2018-05-27 11:44:43 -06:00
Gregory Nutt
22e5af9320
apps/system/zmodem: Allow stack size and priority to be configured.
2018-05-27 10:22:06 -06:00
Gregory Nutt
9ac16049b8
apps/system/zmodem: Fix an incompatibility with the way that CRCs are calculated.
2018-05-27 08:43:22 -06:00
Gregory Nutt
d413571621
apps/system/zmodem: Fix Makefile.host. It was broken when zmodem.h was moved to apps/include/system.
2018-05-26 18:53:49 -06:00
Gregory Nutt
89c630fe55
Update a README file.
2018-05-26 17:29:53 -06:00
Gregory Nutt
1e94c78e2e
apps/system/zmodem: Add an option to enable hardware flow control via termios.
2018-05-26 15:59:58 -06:00
Gregory Nutt
803323c213
apps/system/zmodem/README.txt: Break a long lone and remove some duplicated text.
2018-05-25 18:49:36 -06:00
Michał Łyszczek
b6410136b7
apps/system/embedlog: Support for embedlog data loggin package from https://embedlog.kurwinet.pl/
2018-05-06 15:34:45 -06:00
Gregory Nutt
29c576c820
libc/lzf: Define structures to represent LZF headers.
2018-03-18 12:32:15 -06:00
Gregory Nutt
d35a3e847e
apps/system/lzf:
...
- The maximum block size is now configuration setting in order to give finer control over memory usage.
- The compression/decompression buffers have been moved out the stack and are now global variables. This eliminates the need to set large stack sizes to use this utility.
- Added semaphore protection of all global variables for the case of the FLAT or PROTECTED builds. Unlike the KERNEL build, the same global variables will be used by each instance of the LZF utility. If you want thread safety, then you must either (a) serialize all access to the global variables, or (b) pack the global variables into a structure and allocate that structure on each execution of lzf_main().
2018-03-17 15:35:19 -06:00
Boris Astardzhiev
a7979e4c3b
apps/system/lzf: Refactor so that the user is no longer required to generate the LZF header
2018-03-16 09:55:27 -06:00
Gregory Nutt
14e9a0255b
apps/system/lzf: Don't build the LZF tool if the LZF library is not enabled.
2018-03-16 09:33:36 -06:00
Gregory Nutt
d1a3a58fbe
apps/system/lzf: Move the LZF tool from apps/examples/ to apps/system.
2018-03-16 09:10:01 -06:00
Gregory Nutt
139b008fc9
apps/system and wireless: Applications should use the standard clock() interface, not the internal NuttX clock_systimer() interface.
2018-03-14 07:59:44 -06:00
Juha Niskanen
b36ac8df0a
apps/system/stackmonitor: Fix comparison between pointer and zero character constant.
2018-03-13 07:46:52 -06:00
Gregory Nutt
84ceda663d
system/stackmonitor/: Minor design improvement.
2018-01-20 13:37:38 -06:00
Gregory Nutt
8830a841b4
system/stackmonitor: Re-design the stack monitor so that it does not make forbidden calls directly into the OS, breaking the portable POSIX OS interface. It now properly uses the PROCFS file system to glean information about stack usage.
2018-01-20 13:05:13 -06:00
Fabio D'Urso
da4472a978
apps/system/usbmsc: Added Kconfig options to configure write protection for each LUN
2018-01-14 17:11:32 -06:00
Anthony Merlino
5600b287a5
Merged in antmerlino/apps/setlogmask (pull request #127 )
...
Adds 'setlogmask' application that allows you to set the syslog priority via a simple command
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-12-19 17:15:45 +00:00
Masayuki Ishikawa
021839224f
nxplayer: Add support for http streaming in nxplayer
...
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2017-12-19 15:08:29 +09:00
Masayuki Ishikawa
77ac05c383
nxplayer: Fix warnings by nxstyle
...
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2017-12-19 15:08:26 +09:00
Gregory Nutt
fd63b607b5
apps/system/free: Removed because it violates the portable POSIX OS interface.
2017-11-13 07:59:38 -06:00
Gregory Nutt
402306635a
system/composite: Eliminate warning about dumptrace being defined but not used.
2017-11-12 10:11:30 -06:00
DL
42ec1aad65
Fixed i2ctool write operation in no restart mode (flag -n).
...
It seems that I2C driver has changed a bit since i2ctool was written,
so now i2ctool sends repeated start even if `no restart` flag (-n)
was passed to it.
2017-11-01 06:11:53 +03:00
Gregory Nutt
a27294d788
apps/system/ping6: Use inet_ntop() to improve the appearance of the ping6 IPv6 address output.
2017-10-24 15:38:37 -06:00
Gregory Nutt
bf9bc28fcf
system/ping and ping6: Fix a typo and also a place where = used when == intended.
2017-10-24 12:27:27 -06:00
Gregory Nutt
749ea9e881
This commit removes the ping6 command from NSH and replaces it with the apps/system/ping6 built-in command. The NSH ping6 command had to be removed because it violated the portable POSIX OS interface. The apps/system/ping6 command uses the sem-standard IPPROTO_ICMP6 socket interface.
...
Squashed commit of the following:
apps/system ping and ping6: Fix a backward test.
apps/system/ping6: ping6 logic now builds without error.
apps/system/ping and ping6: Minor clean-up to configuration settings.
apps/system/ping6: Minor clean-up to be able to configure CONFIG_SYSTEM_PING6
apps/nshlib: Remove support for ping6 from NSH.
apps/system/ping6: Add IPPROTO_ICMPv6 ping6. Initial commit is simply a clone of the IPPROTO_ICMP ping logic.
Rename CONFIG_NET_ICMPv6_PING to CONFIG_NET_ICMPv6_SOCKET.
2017-10-24 11:19:41 -06:00
Gregory Nutt
bccf0092a4
nshlib: Remove some dangling IPv4 ping logic. system/ping: Add DNS hostname support.
2017-10-23 09:59:03 -06:00
Gregory Nutt
c1ec7db8a9
This commite eliminates the ping command from NSH and replaces it with a ping 'built-in' at apps/system/ping. The original NSH version of ping violated the portable POSIX interface and, hence, had to be removed. The new system/ping command uses the new IPPROTO_ICMP AF_INET datagram sockets to implement ping.
...
Squashed commit of the following:
apps/system/ping: Fix some timing issues.
apps/system/ping: A few timing related corrections.
apps/nshlib: Remove support for the NSH 'ping' command. The implementation of that command violated the portable POSIX interface and has been replaced with a ping 'built-in' command at apps/system/ping.
apps/system/ping: Add larger payload. Verify content of echoed payload.
apps/system/ping: Various fixes for a clean compile
system/ping: Add new build structure for system ping command.
2017-10-23 08:50:01 -06:00
Alan Carvalho de Assis
cbce879d6a
Add -n samples to lm75 app and replace Centigrade with Celsius
2017-10-15 07:26:55 -06:00
Alan Carvalho de Assis
f5d7df6658
system/lm75: Fix a naming error in a dependency.
2017-10-14 15:24:38 -06:00
Gregory Nutt
7a8561728c
The last change added .PRECIOUS: $(BIN) to everyway Makefile in hopes the libapps.a will not be deleted on Control-C (unproven so far). However, $(BIN) may contain back slashes in some build platforms and that causes problems for make: It can't handle the backslashes in the .PRECIOUS dependency list. $(BIN) replaced with ../../libapp.a, where the number of ../ depends on the depth of the Makefile in the apps/ source tree.
2017-08-13 11:03:17 -06:00
Gregory Nutt
a66da34f18
All Makefiles: Add .PRECIOUS: apps/libapps.a to every Makefile. Hopefully this will end awkward problems when you Control-C out of a build and libapps.a is deleted.
2017-08-13 09:35:14 -06:00
Gregory Nutt
19acc8ad4e
apps/system/composite: Remove references to USBMSC. There still dependencies on CDC/ACM in the serial USB trace output. That really should be removed.
2017-07-21 08:35:01 -06:00
Gregory Nutt
1882fe3200
Merge remote-tracking branch 'origin/master' into composite
2017-07-16 08:54:23 -06:00
Frank Benkert
7b9ec306db
Squashed commit of the following:
...
commit 99b41a291b668179495f23f1dd5e48f8711488f100896040234afcd80089604044f913ea01ae1eeadaf913ea0179bcbdd798915b42f8bcbdd798c62219c02d1657d1ff2219c02ddbfe1e52a8d81d9c41fe1e52a83a94f82d4775f29d9d94f82d473da11806eeffe0640da11806ee5ff29dc9855f5f8878f29dc9851270faf0d1d8759ffe70faf0d1707d3b1581a77705907d3b158142b2c392d4c8ae5f16b2c392d4fe95eb2034f3dc5bea95eb20343b7652b67882
2017-07-16 08:45:26 -06:00
Gregory Nutt
c7f8540169
apps/system/composite: Fix configuration selecting.. was setting the port number, not the configure ID. Also add a configuration option to select the default configuration.
2017-07-15 12:13:17 -06:00
