liqinhui
91a697a3f4
renew6: Optimize the process of obtaining an IPv6 address.
...
If Managed Address Congfiguration flag in the Router Advertisement
Messsage is set, we would obtain the IPv6 address though the stateful
DHCPv6 procedure.
Signed-off-by: liqinhui <liqinhui@xiaomi.com>
2023-12-07 06:26:50 -08:00
Zhe Weng
2f9d98cab2
netutils/netlib: Add support for add/del a single IPv6 address
...
Note:
The `SIOCSIFADDR` and `SIOCDIFADDR` uses different params for `AF_INET` and `AF_INET6` (`struct ifreq` vs `struct in6_ifreq`) as defined by https://man7.org/linux/man-pages/man7/netdevice.7.html
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2023-11-08 00:20:19 +08:00
wangchen
c2f75330f7
nshlib/netcmds:support to set MTU
...
Usage:ifconfig interfacename mtu ***
Signed-off-by: wangchen <wangchen41@xiaomi.com>
2023-04-27 18:02:23 +08:00
Petro Karashchenko
a926c8bf12
include/netutils: fix code alignments
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2023-04-19 03:11:19 +08:00
Zhe Weng
64f9dc100c
netutils: Add iptables in netlib.
...
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2022-12-29 14:26:41 +08:00
zhanghongyu
c7e8ade590
arp: change arptable get struct from arp_entry_s to arpreq
...
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
2022-12-14 21:19:37 +08:00
zhanghongyu
df3121213e
cmd_arp: add device input for arp interface
...
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
2022-12-14 21:19:37 +08:00
liyi
c5102fe504
ifconfig support set IPv6 DNS server
...
Signed-off-by: liyi <liyi25@xiaomi.com>
2022-08-04 19:47:15 +08:00
Xiang Xiao
66dbaa4539
Replace self defined macros with NET_SOCK_[FAMILY|TYPE|PROTOCOL]
...
NET_SOCK_* is defined by nuttx/net/netconfig.h and then can be shared
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-12-20 16:04:29 -03:00
Jiuzhu Dong
5c1626c764
netutils: add NETLIB_SOCK_TYPE for AF_RPMSG
...
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
2021-09-12 11:37:53 +08:00
YAMAMOTO Takashi
66650f223b
netlib: Change the type of url_s:port to uint16_t
...
uint16_t is what's used in netlib and webclient in most of places.
There is a static analizer complaining on the type mismatch.
(It's actually harmless as far as I understand though.)
2021-08-12 04:33:44 -07:00
YAMAMOTO Takashi
f6c194944c
netlib.h: Fix an nxstyle error
2021-08-12 04:33:44 -07:00
Peter van der Perk
839b3530d4
netlib: add AF_CAN family and CONFIG_NET_CAN support
2020-06-15 07:23:37 -06:00
YAMAMOTO Takashi
984b80d7cf
netlib.h: Fix nxstyle complaints
2020-05-27 16:41:13 +08:00
YAMAMOTO Takashi
4e32615ab7
netlib: #if 0 out unimplemented fields in url_s
...
- Avoid giving a wrong impression to users
- Save a little memory
2020-05-27 16:41:13 +08:00
Gregory Nutt
1859f56380
apps/netutils/netinit, apps/netutils/netlib/, and apps/include/netutils/netlib.h: Extend a few definitions to permit building netutils and netinit with only Netlink sockets enabled.
2019-11-19 09:49:36 -06:00
Gregory Nutt
449290c8da
apps/examples/netlink_route: Add test/example of NETLINK_ROUTE 'get' opeations. apps/netutils/netlib: Fixes to NETLINK_ROUTE helpers found by testing with apps/examples/netlink_route.
2019-11-11 13:40:57 -06:00
Gregory Nutt
438777cd38
netutils/netlib/netlib_getroute.c: Add function to retrieve routing tables using netlink.
2019-11-10 12:36:34 -06:00
Gregory Nutt
e260ea779c
apps/netutils/netlib/netlib_getnbtab.c: Add a utility function that will return a list of all network devices in the UP state.
2019-11-09 17:38:02 -06:00
Gregory Nutt
2507cc15e8
netutils/netlib/netlib_getnbtab.c: Add support for retrieving a snapshot of the IPv6 neighbor table using Netlink sockets.
2019-11-08 11:30:32 -06:00
Gregory Nutt
b65c3dac0e
netutils/netlib/netlib_getarptab.c: Misc fixes from initial testing with the 'arp -t' commeand.
2019-11-03 19:29:20 -06:00
Gregory Nutt
400995dec6
nshlib/nsh_netcmds.c: Add a -t option to the arp command which will enable printing the entire ARP table.
2019-11-03 16:19:14 -06:00
Gregory Nutt
768218ee81
netutils/netlib/netlib_getarptab.c: Add a function to read the entire ARP tableusing NETLINK_ROUTE protocol.
2019-11-03 15:13:47 -06:00
Sebastien Lorquet
fe0954cd62
netutils/netlib/netlib_parseurl.c: Add a more flexible version of netlib_parsehttpurl. This one can parse any URL, and is extensible so future improvements keep the same API.
2019-04-26 13:08:38 -06:00
Gregory Nutt
3e81973cd5
include/netutils/netlib.h: Eliminate a warning about AF_UNSPEC and AF_INET not defined.
2018-08-03 10:50:24 -06:00
Gregory Nutt
0094b411da
apps/netutils/netlib: Various fixes needed to get a clean netlib build with Bluetooth only.
2018-04-03 10:01:55 -06:00
Gregory Nutt
a7157d0e3c
include/netutils/netlib.h: In order to avoid pre-processing warnings, NETLIB_SOCK_FAMILY must always be assigned a value, even if there is no real meaning value for it.
2017-11-03 09:57:33 -06:00
Gregory Nutt
6b9d23c6aa
Correct and standardize some naming used in the previous commits.
2017-10-30 14:16:37 -06:00
Gregory Nutt
dafc88ed25
include/netutils/netlib.h: Broaden socket definitions of previous commit.
2017-10-30 14:11:42 -06:00
Gregory Nutt
51b369589b
include/netutils/netlib.h: Add definitions needed when only local Unix domain sockets are supported.
2017-10-30 11:34:59 -06:00
Gregory Nutt
dc5be379a9
Squashed commit of the following:
...
apps/netutils/netlib: netlib_ipv[4|6]adaptor() will now use the new routing table interfaces if they are available: If the desination IP address does not correspond to the network served by any device, then the address of the router that should get us to the correct sub-net is is determined. Then the network adaptor that can communicate with the that router has the IP address that will returned.
apps/netutils/netlib: Add new utilities netlib_ipv[4|6]router() that can be used to determine the IP address of a router that would be used some some destination IP address that is not locally accessible.
apps/netutils/netlib: Add helpers for reading the routing table: netlib_read_ipv4route() and netlib_read_ipv6route()
2017-09-20 10:35:56 -06:00
Gregory Nutt
fb804e3498
netlib_ipv[4|6]adaptor: Add a check to handle the case where the network device configuration changed asynchronously and the second IOCTL returns more data than the allocated buffer.
2017-09-20 06:52:05 -06:00
Gregory Nutt
450624c370
Squashed commit of the following:
...
netutils/netlib: Add netlib_ipv6adaptor()
netutils/netlib: Add netlib_ipv4adaptor()
2017-09-19 15:21:13 -06:00
Gregory Nutt
e1b0821eb1
If only PF_IEEE802154 socket family is enabled, then must use SOCK_DGRAM.
2017-08-21 07:14:33 -06:00
Gregory Nutt
41ce937ed0
Changes to netlib and nsh so that you build build with PF_IEEE802154 enabled and 6LoWPAN disabled.
2017-08-20 09:09:47 -06:00
Gregory Nutt
c433e07a27
netutils/netlib: Add a help to decode short addresses.
2017-08-18 12:07:41 -06:00
Gregory Nutt
3b8c97747d
netutils/netlib: Fix netlib_nodaddrconv() so that its return type is the same as other address conversion functions. NSH: Correct parsing of ifconfig so that you can specify the HW address without specifying the IP address.
2017-08-02 14:30:34 -06:00
Gregory Nutt
c343fc618e
apps/netutils/netlib: Add support for PktRadio IOCTL commands.
2017-08-02 12:40:50 -06:00
Anthony Merlino
c2ad1d2d1c
Switches IEEE 802.15.4 based code to using byte arrays instead of uint16_t values for short address and PAN ID
2017-06-19 05:56:52 -04:00
Gregory Nutt
033b42789b
NSH: Fix some ieee 802.15.4 initialization logic. It should not set the saddr or panid; those cannot be hard-coded but must come from the coordinator.
2017-06-17 10:04:18 -06:00
Gregory Nutt
c2bdd49421
netlib and NSH: Add logic to set the IEEE802.15.4 PAN ID.
2017-04-19 18:10:39 -06:00
Gregory Nutt
ec6ff2791a
netutils: Add a helper function to convert a string to a 6loWPAN node address
2017-04-08 12:19:35 -06:00
Gregory Nutt
4c56a28016
6loWPAN: Fix some conditional compilation
2017-04-07 07:24:09 -06:00
Gregory Nutt
194c2d86a8
6loWPAN: Add network IOCTL support to set the node address
2017-04-06 16:00:41 -06:00
Gregory Nutt
84444e4dcc
netutils/nshlib: Add wrapper to get the wireless ESSID.
2017-03-13 14:16:26 -06:00
Gregory Nutt
0cb844e790
netutils/netlib: Add one wireless IOCTL wrapper. For now, this is just a test to be sure that the wireless IOCTL definitions are in place.
2017-03-13 10:16:20 -06:00
Gregory Nutt
1482732f18
NetLib: Move functions in netlib.c to separate files; improve some naming
2016-02-08 16:09:24 -06:00
Gregory Nutt
3f95e05bc2
NetLib: Add utility functions to support access to the ARP table
2016-02-08 11:44:59 -06:00
Gregory Nutt
a88338b41a
Merge remote-tracking branch 'origin/master' into resolv.conf
2016-01-14 15:17:20 -06:00
Pelle Windestam
16c02a07d7
Add netlib_get_dripv4addr() and netlib_get_ipv4netmask()
2016-01-14 07:24:36 -06:00