sergiotarxz/nuttx-apps
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
3,364 Commits 1 Branch 0 Tags 24 MiB
3c4ca6a35e
Commit Graph

629 Commits

Author SHA1 Message Date
Gregory Nutt
976ce0550c NSH: eliminate a warning 2017-09-27 12:05:19 -06:00
Masayuki Ishikawa
4822878990 nshlib/nsh_netcmds.c: Fix a compilation error when IPv4/IPv6 dual stack is enabled 2017-09-26 11:28:40 +09:00
Bruno Herrera
3fe720d1e2 Fixes for problems found by Coverity in the apps/ repository: 
nshlib/nsh_parse.c: Avoid truncating the strcmp result into a unsigned char variable.

    nshlib/nsh_netcmds.c: Check for valid hostip before using it.

    nshlib/nsh_ddcmd.c: Fix resouce leak when 'if=' or 'of=' params are repeated in the command line.  For example:

       dd if=/dev/null if=/dev/zero of=/dev/null or
       dd if=/dev/zero of=/dev/zero of=/dev/null
 2017-09-25 07:34:34 -06:00
Gregory Nutt
cdf0528933 examples/dac: Lets use printf instead of _info in application code. 2017-09-01 07:39:39 -06:00
Gregory Nutt
3367bde8fe NSH: Add conditions so that ifconfig and ifup will not be disabled if we are using only PF_IEEE802154 2017-08-21 09:32:07 -06:00
Gregory Nutt
41ce937ed0 Changes to netlib and nsh so that you build build with PF_IEEE802154 enabled and 6LoWPAN disabled. 2017-08-20 09:09:47 -06:00
Gregory Nutt
767b29335c Eliminate some warnings found in build testing. 2017-08-13 12:25:22 -06:00
Gregory Nutt
7a8561728c The last change added .PRECIOUS: $(BIN) to everyway Makefile in hopes the libapps.a will not be deleted on Control-C (unproven so far). However, $(BIN) may contain back slashes in some build platforms and that causes problems for make: It can't handle the backslashes in the .PRECIOUS dependency list. $(BIN) replaced with ../../libapp.a, where the number of ../ depends on the depth of the Makefile in the apps/ source tree. 2017-08-13 11:03:17 -06:00
Gregory Nutt
a66da34f18 All Makefiles: Add .PRECIOUS: apps/libapps.a to every Makefile. Hopefully this will end awkward problems when you Control-C out of a build and libapps.a is deleted. 2017-08-13 09:35:14 -06:00
Gregory Nutt
970e98a902 Additional changes associated with last commit. 2017-08-12 12:11:22 -06:00
Gregory Nutt
90ebda9120 Eliminate another warning about an unused function 2017-08-12 12:09:01 -06:00
Gregory Nutt
1cdf4ad8d1 Fix a warning found in build testing 2017-08-12 11:14:30 -06:00
Gregory Nutt
7a7c7ee93a Update README and fix some conditional compilation from the last commit. 2017-08-11 15:56:53 -06:00
Gregory Nutt
5dcf5620e3 NSH Library: Add a route command that will dump the content of routing table. 2017-08-11 15:33:26 -06:00
Gregory Nutt
1e23b30afe more issues with last change: netmask must be in network order. 2017-08-10 16:08:09 -06:00
Gregory Nutt
654d526a69 NSH addroute/delroute: Fix an indexing problem introduced with previous commit. 2017-08-10 11:40:12 -06:00
Gregory Nutt
52e4da1e41 NSH addroute and delroute: All expression of the netmask in IPv4 CIDR or IPv6 slash notation. This really reduces the pain of using the commands, especially for IPv6. 2017-08-10 10:30:20 -06:00
Gregory Nutt
f58768db3d NSH library: Update addroute and delroute command. The would support either IPv4 or IPv6, but not both. 2017-08-10 09:15:44 -06:00
Gregory Nutt
3b8c97747d netutils/netlib: Fix netlib_nodaddrconv() so that its return type is the same as other address conversion functions. NSH: Correct parsing of ifconfig so that you can specify the HW address without specifying the IP address. 2017-08-02 14:30:34 -06:00
Gregory Nutt
d6050d70a2 NSH library: Extend ifconfig command so that it can set variable length packet radio addresss. 2017-08-02 13:13:19 -06:00
Gregory Nutt
c343fc618e apps/netutils/netlib: Add support for PktRadio IOCTL commands. 2017-08-02 12:40:50 -06:00
Gregory Nutt
7d0037b08a NSH: Misc changes needed for PktRadio support. 2017-07-30 16:03:56 -06:00
Gregory Nutt
7441c5422f Socket I/F: Cleanup for good CONFIG_NET_PKT build. 2017-07-14 13:43:04 -06:00
Masayuki Ishikawa
ef04aeaead NSH library: Fix build break in nsh_command.c with IPv4/IPv6 dual stack. 2017-07-04 10:13:26 +09:00
Gregory Nutt
d81d9c419b Eliminat a warning when both Ethernet and 6LoWPAN are enabled; improve some naming. 2017-07-02 11:28:12 -06:00
Gregory Nutt
28415d662b netutils/telnetd and users of telnetd: Add support for IPv6. 2017-06-27 09:14:13 -06:00
Gregory Nutt
98204bad94 system/telnet: POLL must not be disabled in configuration. Telnet client port argument is no optional. 2017-06-27 07:46:16 -06:00
Gregory Nutt
9091716419 revise some of the state handling in the previous commit. 2017-06-26 18:16:05 -06:00
Gregory Nutt
342de81641 NSH library: Add a Telnetd command. This is needed when network initialization is deferred. In that case, telnet daemon cannot be started until the network is finally initialized. The telnetd command was added just for that case: So that the telnet daemon can be started from the NSH command line after the network is configured. 2017-06-26 18:00:13 -06:00
Gregory Nutt
d5a897fa1b Merge branch 'master' of bitbucket.org:nuttx/apps into ieee802154 2017-06-19 13:35:34 -06:00
Gregory Nutt
2f975e8f06 nshlib: fix size of 6LoWPAN extended address. 2017-06-19 09:47:17 -06:00
Oleg Evseev
f13d4125a4 Merged in lukegluke/apps (pull request #91) 
fix copy-paste typo in nsh_usbconsole.c

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-06-19 15:29:09 +00:00
Oleg Evseev
8ee1e79d03 fix copy-paste typo in nsh_usbconsole.c 2017-06-19 15:05:06 +00:00
Gregory Nutt
2bb14d854d L should be capitalized in 6LoWPAN 2017-06-18 16:02:11 -06:00
Gregory Nutt
2e4740e6bb i8sak: Missing newline in fprintf output 2017-06-18 11:28:36 -06:00
Gregory Nutt
9485744265 NSH network initialization: Do not set the IP address for 6loWPAN. The 6loWPAN stack uses IP address that derive from the ieee 802.15.4 addressing and cannot be (safely) configured by the user. 2017-06-17 11:31:04 -06:00
Gregory Nutt
22d9c69d87 NSH network configuration: Re-factor a function that has gotten too big and too complex. 2017-06-17 10:37:31 -06:00
Gregory Nutt
033b42789b NSH: Fix some ieee 802.15.4 initialization logic. It should not set the saddr or panid; those cannot be hard-coded but must come from the coordinator. 2017-06-17 10:04:18 -06:00
Masayuki Ishikawa
41dee001ad Merge branch 'master' into bug_fix_by_sony 2017-05-22 09:13:02 +09:00
Gregory Nutt
4e7b17d783 Fix some typos in comments. 2017-05-21 12:05:07 -06:00
Gregory Nutt
8c1446671c apps/nshlib: Add a new option CONFIG_NSH_NETLOCAL that will suppress some built in operations and will support manual configuration of a wireless network 2017-05-21 12:00:55 -06:00
Simon Piriou
523d7645c4 wapi: add basic wapi_event_stream_extract implementation 2017-05-21 16:24:49 +02:00
Nobutaka Toyoshima
3a8cfb6c04 nshlib: Fix a resource leak in cmd_hexdump() 
Jira: PDFW15IS-265
Coverity-ID: 10786
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
 2017-05-20 17:57:03 +09:00
Sebastien Lorquet
ea1025ead2 DHCPC: Remove hard-coded interface device. Now passed as a parameter to dhcpc_open(). 2017-05-19 15:31:22 -06:00
Sebastien Lorquet
297844b1ce Fix comments formatting 2017-05-19 17:50:26 +02:00
Sebastien Lorquet
aefddc3648 Second batch of changes (no problems) 2017-05-19 17:37:17 +02:00
Gregory Nutt
13911d9b17 Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they. 2017-05-11 13:40:03 -06:00
Gregory Nutt
1bad025c81 Cosmetic changes to comments 2017-05-11 07:46:08 -06:00
Gregory Nutt
5fbf2fd8d1 NSH wireless setup: Move call to nsh_associate(). It should be possible to associate with an AP when DHCPC is disabled. 2017-05-09 06:39:08 -06:00
Gregory Nutt
8380447e1a Merge remote-tracking branch 'origin/master' into ieee802154 2017-05-08 14:31:54 -06:00
Gregory Nutt
0376019c35 WPA associate: NSH was not setting the algorithm parameter. 2017-05-08 13:28:08 -06:00
Gregory Nutt
6ec8e56f89 Merge remote-tracking branch 'origin/master' into ieee802154 2017-05-06 11:30:48 -06:00
Gregory Nutt
40a1fbf498 Forgot to add a file in the last commit. 2017-05-06 11:28:56 -06:00
Gregory Nutt
a0915850b9 wireless/wapi: wpa_driver_wext_associate() now accepts a configuration parameter that can be used to specify the wireless properties. nshlib: NSH now has configuration options to select the wireless properties. It builds the configuration structure and passes this to wpa_driver_wext_associate() so that it will setwork the network as configured. 2017-05-06 11:28:11 -06:00
Gregory Nutt
44ace8e1cc 6loWPAN: Replace some Rime address naming with more consistent short/exended address terminology 2017-05-04 08:21:12 -06:00
Simon Piriou
33027bd66e wireless/wext: Add drivers_wext from the WPA supplicant; Integrate into NSH 2017-05-02 09:43:48 -06:00
Gregory Nutt
a5c439777d nshlib/nsh_netinit.c: If IEEE802.11 selected use wlan0 instead of eth0 for network device name. 2017-05-02 08:26:21 -06:00
Gregory Nutt
5b7f2b0ce2 Eliminate a warning 2017-04-29 08:52:10 -06:00
Gregory Nutt
08b2fee0fb NSH: Needs to include tftp.h if TFTP no disabled 2017-04-29 08:42:26 -06:00
Ian McAfee
8007332ab1 I need to look at the registers that are at or around 0xe000ef90. Using mw and xd, I see that nsh does not support pointers greater than 0x7fffffff. A quick look at the source shows that the pointers for those two commands are set with calls to strtol() rather than strtoul(). Changing the two pointer-setting instances to strtoul() fixes the problem, at least for my architecture/config. 2017-04-26 17:54:56 -06:00
Gregory Nutt
ad608c705c nshlib: nsh_netcmds.c should include netlib.h even if neither TCP nor UDP are enabled 2017-04-25 08:25:23 -06:00
Gregory Nutt
c2bdd49421 netlib and NSH: Add logic to set the IEEE802.15.4 PAN ID. 2017-04-19 18:10:39 -06:00
Masayuki Ishikawa
6b75120352 NSH library: Fix open flags in nsh_codeccmd.c 
Jira: PDFW15IS-2824
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
 2017-04-19 16:12:44 +09:00
Gregory Nutt
775d1052a5 NSH set command: Eliminate useless argc check of SCRIPTS are enabled but ENVIRONMENT is disabled 2017-04-09 12:03:18 -06:00
Gregory Nutt
169bcab331 NSH: Eliminate warning about unused variable. 2017-04-09 11:54:59 -06:00
Gregory Nutt
8369052a22 NSH library: Extend ifconfig to support 6loWPAN. Adapt to some changes in configuration variable usage. 2017-04-08 12:21:40 -06:00
Gregory Nutt
194c2d86a8 6loWPAN: Add network IOCTL support to set the node address 2017-04-06 16:00:41 -06:00
David Sidrane
35cf98d4df Print expanded variables if -x 2017-04-05 18:31:47 -06:00
David Sidrane
d03aa9112e Added support for set [{+|-}{e|x|xe|ex}] [<name> <value>] 
Set the 'exit on error control' and/or 'print a trace' of commands when parsing scripts in NSH.  The settinngs are in effect from the point of exection, until they are changed again, or in the case of the init script, the settings are returned to the default settings when it exits.

Included child scripts will run with the parents settings and changes made in the child script will effect the parent on return.

Use 'set -e' to enable and 'set +e' to disable (ignore) the exit condition on commands. The default is -e. Errors cause script to exit.

Use 'set -x' to enable and 'set +x' to disable (silence) printing a trace of the script commands as they are ececuted. The default is +x. No printing of a trace of script commands as they are executed.
 2017-04-05 18:25:59 -06:00
Gregory Nutt
eef0161dd4 examples/nettest: Trying to adapt to use for testing 6loWPAN. 2017-04-03 15:33:39 -06:00
Gregory Nutt
efa2de16a4 NSH: Fix some warnings about integer/pointer casts of different sizes (probably only effects 64-bit simulation) 2017-04-03 09:26:10 -06:00
Jussi Kivilinna
3e2743e826 nshlib: fix building when CONFIG_NET_USRSOCK enabled with other link-layer 2017-03-31 09:10:55 -06:00
Tomasz Wozniak
71b45ed2c2 built-in libc defect workaround: replace '%6.6u' format with an equivalent '%06u' 2017-03-21 09:39:51 +01:00
Gregory Nutt
2ef46ce4ba NSH library: In nsh_argexand(), if CONFIG_NSH_ARGCAT is defined but CONFIG_NSH_CMDPARMS defined and/or CONFIG_DISABLE_ENVIRON not defined, then there is a situation that causes an infinite loop in the parser. Noted by Freddie Chopin. 2017-03-09 08:07:22 -06:00
Alan Carvalho de Assis
8e7ed15cce NSHLIB uname command: Eliminate 'defined but not used' warning in some configurations 2017-03-07 15:36:18 -06:00
Alan Carvalho de Assis
d506939b59 NSHLIB ps command: Eliminate 'defined but not used' warning in some configurations 2017-03-07 15:10:17 -06:00
Gregory Nutt
a7e34f3b97 Make use of FAR storage class consistent 2017-02-27 07:54:21 -06:00
Gregory Nutt
fa4b047d35 Fix typo in last commit 2017-02-27 07:49:49 -06:00
Gregory Nutt
590791e12d NSH: Eliminate a warning when all memory inspection commands are disabled. 2017-02-27 07:30:52 -06:00
Gregory Nutt
bab5df0966 Eliminate a warning about an unused variable. 2017-02-27 07:30:52 -06:00
Gregory Nutt
81645fe18f strcasecmp, strncasecmp, bzero, bcmp, and bcopy should be defined in strings.h, not string.h. bzero, bcmp, and bcopy are legacy functions; the contemporary counterparts should be used instead. 2017-02-16 15:58:15 -06:00
Gregory Nutt
740b528199 apps/examples/stat: Add a simple test for stat(), fstat(), and statfs(). 2017-02-13 14:08:19 -06:00
Gregory Nutt
bf9ca8868e NSH: Both arguments of 'ln' command may be relative paths 2017-02-07 07:56:54 -06:00
Gregory Nutt
1a696b0367 Fix a memory leak in the 'ln' command when a failure occurs. 2017-02-06 10:20:29 -06:00
Gregory Nutt
7a0e08c37b NSH: Add readlink command. 2017-02-05 10:35:11 -06:00
Gregory Nutt
bb81a3d11d NSH ls command: if node is a symobolic link, use readlink() to get and the display the target of the symblic link. 2017-02-03 14:13:25 -06:00
Gregory Nutt
9fbca32710 Soft links: Fixed logic in RTOS. Remove NSH kludge of last commit. 2017-02-03 13:23:27 -06:00
Gregory Nutt
51f71304d1 NSH: Extend ls command to show type of symbolic link. 2017-02-03 11:21:37 -06:00
Gregory Nutt
2ac55ec4e7 NSH: Add support for the 'ln' command. 2017-02-02 19:40:59 -06:00
Gregory Nutt
d195751a90 Update NSH and examples/modules for changes in kernel module interface. 2017-01-22 15:11:49 -06:00
Masayuki Ishikawa
4bf85f7c7b NSH: dd command will show statistics 2016-12-19 18:33:34 -06:00
Gregory Nutt
9b951b4dd8 apps/nshlib: nsh_getdirpath(), use snprint instead of sprintf to avoid possibility of buffer overrun. Noted by Chung Hwan Kim. 2016-10-11 17:35:31 -06:00
Gregory Nutt
2c8ac4440a apps/nshlib: Don't try to flush output streams if stdio buffered I/O is not supported. 2016-10-06 08:36:15 -06:00
Alan Carvalho de Assis
cdedb412ed apps/nshlib: Add printf command to NSH, e.g., controlling /dev/userleds from command line: nsh> printf \x01 > /dev/userleds 2016-10-01 07:44:15 -06:00
Neil Hancock
7fc401d3c1 Correct an assertion 2016-09-12 07:26:37 -06:00
Aleksandr Vyhovanec
e832e73b99 nshlib/: Fix missing semicolon; include string.h. 2016-09-05 07:05:17 -06:00
Gregory Nutt
8cfa1dbd3b The previous commit was reverted. My concern was misplaced: There is a guard boolean to prevent running the init script more than once. This comment just restores some of the good cosmetic changes that were included in the reverted commit. 2016-08-25 14:28:25 -06:00
Gregory Nutt
4eda22b4db Revert "This commit adds nsh_consolechild(). I noticed that there are several examples that call nsh_consolemain.c to create to create a new NSH session. That will not always work because nsh_consolemain() performs the one-time initialization needed by the NSH library: Mounting, reading, and running the start-up script, configuring USB tracing. Some of those actions will cause failures if attempted twice." 
This reverts commit 4d364d836a.
 2016-08-25 14:19:36 -06:00
Gregory Nutt
4d364d836a This commit adds nsh_consolechild(). I noticed that there are several examples that call nsh_consolemain.c to create to create a new NSH session. That will not always work because nsh_consolemain() performs the one-time initialization needed by the NSH library: Mounting, reading, and running the start-up script, configuring USB tracing. Some of those actions will cause failures if attempted twice. 
Here are some offenders: examples/cc3000/shell.c, examples/nsh/nsh_main.c, examples/nxterm/nxterm_main.c, and examples/pty_test/pty_test.c.  It is possible that for some of those, that represents the first call to nsh_consolemain().  But probably not.

To give other initialization options, I added nsh_consolechild() which is identical to nsh_consolemain() other than it omits all of the one-time initialization.  Of course, you would not get the result that you wanted if nsh_consolechild() were called without nsh_consolemain().
 2016-08-25 14:14:23 -06:00
Gregory Nutt
e39cfc97c7 Add logic to support an NSH-specific system command 2016-08-25 11:34:36 -06:00