Gregory Nutt
|
510f325ae4
|
nshlib: Use CONFIG_NSH_PROC_MOUNTPOINT instead of literal /proc; Move readfile() from nsh_proccmds.c to nsh_fsutils.c as nsh_readfile()
|
2015-11-28 07:23:08 -06:00 |
|
Gregory Nutt
|
0fb32570ff
|
apps/nshlib: Remove all references to internal OS interface netdev_foreach(). Logic in ifconfig, ifup, and ifown now use the procfs file system to examine networking status.
|
2015-11-27 17:47:09 -06:00 |
|
Gregory Nutt
|
bb88ff9b12
|
nshlib/: ifconfig now uses /proc/net/eth0 to display network configuration. You will need to enable the procfs file system in order to use ifconfig
|
2015-11-27 16:57:22 -06:00 |
|
Gregory Nutt
|
32b992971b
|
apps/nshlib: The 'ifconfig' command now uses /proc/net/stat to show network statistics. A consequence of this is that you cannot view network statistics if the procfs is not enabled and mounted at /proc
|
2015-11-27 13:04:11 -06:00 |
|
Gregory Nutt
|
a62bf6727f
|
NSH no long calls losetup() and loteardown() directly. Now it uses /dev/loop and performs these operations using ioctl() calls
|
2015-11-25 17:55:16 -06:00 |
|
Gregory Nutt
|
178c9780a8
|
NSH: Add support for basename and dirname commands
|
2015-11-23 10:21:15 -06:00 |
|
Ken Pettit
|
ad48d89fe2
|
mksmartfs: Move into apps/fsutils from kernel, now uses only open and ioctl. Add configuration option to supported multiple root directories. From Ken Petit
|
2015-11-23 06:59:56 -06:00 |
|
Gregory Nutt
|
146f126ead
|
nshlib: Now that NuttX automatically converts block to character devices, the implemention of the DD command no longer has to muck with block to character conversion
|
2015-11-21 11:57:41 -06:00 |
|
Gregory Nutt
|
e9447c6058
|
Standardize nameing of the pre-processor definitiongs group header
|
2015-10-02 14:06:11 -06:00 |
|
Gregory Nutt
|
ce3a2dc0d4
|
NSH changes to work with the network local loopback device
|
2015-08-24 13:59:52 -06:00 |
|
Gregory Nutt
|
820c5c42dd
|
readline/NSH: Extend the tab-completion logic so that NSH commands can also be completed by pressing the tab key
|
2015-07-30 12:11:58 -06:00 |
|
Gregory Nutt
|
25d45d642f
|
Add an NSH nslookup command
|
2015-07-13 11:19:02 -06:00 |
|
Gregory Nutt
|
d710b7c3b7
|
Add support for the NSH uname command
|
2015-07-04 15:13:11 -06:00 |
|
Gregory Nutt
|
95eea325cf
|
Add poweroff and reboot NSH commands as alternatives to the shutdown command
|
2015-07-04 12:44:24 -06:00 |
|
Gregory Nutt
|
a2a1530694
|
The NSH shutdown command now supports the --reset option, if available in hardware
|
2015-07-04 11:11:16 -06:00 |
|
Gregory Nutt
|
a18ed33d99
|
NSH now supports a shutdown command if CONFIG_BOARDCTL_POWEROFF-y
|
2015-07-04 08:20:19 -06:00 |
|
Gregory Nutt
|
905f881162
|
Enhancements to NSH ifconfig for case of multi-link operation, TUN device and local connections. From Max Neklyudov.
|
2015-05-19 12:26:20 -06:00 |
|
Gregory Nutt
|
23075e0b30
|
Allow NSH date command with no RTC. This command is useful without an RTC too. Also, this permits testing on the simulator which never has an RTC
|
2015-04-11 12:13:18 -06:00 |
|
Gregory Nutt
|
9fcd34f1c4
|
NSH initialization now calls boardctl(BOARDIOC_INIT) instead of board_app_initaliaze. Modify all configurations: Make sure that CONFIG_LIB_BOARDCTL=y appears wherever CONFIG_NSH_ARCHINIT=y appears. Remove support for CONFIG_NSH_ARCHMAC. It is not used and there are better ways to do that operation
|
2015-03-31 12:14:16 -06:00 |
|
Gregory Nutt
|
6bad91308d
|
Rename arch_nshinitialize() to board_app_initialize()
|
2015-03-31 10:21:31 -06:00 |
|
Gregory Nutt
|
5060e08fcb
|
Unix domain: With these changes I can build a system with no link layer enabled, only Unix domain sockets
|
2015-01-27 15:26:03 -06:00 |
|
Gregory Nutt
|
b39fb98d86
|
apps/nshlib: Add the ping6 command to support checking IPv6 networks. NSH logic is complete but still missing some network level support
|
2015-01-23 12:49:49 -06:00 |
|
Gregory Nutt
|
71d2ae0fac
|
NSH library: Disable put and get commends of TFTP client is not enabled; disable wget command if web client is not enabled
|
2015-01-19 10:32:46 -06:00 |
|
Gregory Nutt
|
da8ba5dfd5
|
Remove use of CONFIG_MASK_TASK_ARGS from NSH
|
2014-11-13 06:27:29 -06:00 |
|
Gregory Nutt
|
eaddb9059f
|
Emit a warning if number of arguments to builtin or file app can be truncated
|
2014-11-12 14:23:14 -06:00 |
|
Gregory Nutt
|
131b8c5946
|
Move CONFIG_NSH_TMPDIR to CONFIG_LIBC_TMPDIR
|
2014-11-05 07:49:20 -06:00 |
|
Gregory Nutt
|
4eadcabc1b
|
Several commands must be disabled in the kernel build because they depend on interfaces that are not available outside of the kernel: dd, df, losetup, mkfatfs, mkdr, and ps.
|
2014-09-07 10:46:06 -06:00 |
|
Gregory Nutt
|
7c7a81aa69
|
Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL
|
2014-08-29 14:47:22 -06:00 |
|
Gregory Nutt
|
c18504f820
|
Minor corrections during integration of link status monitor
|
2014-08-17 11:26:02 -06:00 |
|
Gregory Nutt
|
5943cf2c2b
|
Extend the NSH network initialization logic. There is now an option that will create a network monitor thread that will monitor the state of the link. When the link goes down, the code will attempt to gracefully put the Ethernet driver in a down state; When the link comes back, the code will attempt to bring the network back up.
|
2014-08-17 09:51:26 -06:00 |
|
Gregory Nutt
|
b651f37ce7
|
Remove CONFIG_DISABLE_CLOCK
|
2014-08-07 12:35:24 -06:00 |
|
Gregory Nutt
|
dc57af80fc
|
NSH networking: There is now a configuration option that will bring up the network on an separate thread. Since the network bring-up is asynchronous, there are not serial console start-up delays due to the network negotiation time.
|
2014-08-06 11:59:41 -06:00 |
|
Gregory Nutt
|
d4aa9e7b6d
|
NSH Networking: Also add an option to let platform-specific logic select the MAC address.
|
2014-08-06 10:12:10 -06:00 |
|
Gregory Nutt
|
16b2090ca0
|
NSH Networking: Software assigned MAC address is now configurable. From Lazlo
|
2014-08-06 09:19:26 -06:00 |
|
Gregory Nutt
|
187e4f204d
|
NSH Keyboard Input: Worked okay until you try to disabled the keyboard
|
2014-07-06 08:09:33 -06:00 |
|
Gregory Nutt
|
9a49735c4b
|
NSH: Add an option to take stdin from a USB keyboard device
|
2014-07-03 16:25:02 -06:00 |
|
Gregory Nutt
|
7a98f10283
|
The alternate console device CONFIG_NSH_CONDEV must not be defined unconditionally. This causes errors when using Telnet sessions. This was solved by adding CONFIG_NSH_ALTCONDEV: CONFIG_NSH_ALTCONDEV enables or disables the feature then, if enabled, CONFIG_NSH_CONDEV provides the alternative console device name
|
2014-05-05 08:52:02 -06:00 |
|
Gregory Nutt
|
2bc6d67866
|
unlink/rm can now be used on nodes in the pseudo-filesystem. There is new configuration option to suppress these costly and mostly useless operations on the pseudo-filesystem
|
2014-02-20 18:14:02 -06:00 |
|
Gregory Nutt
|
c88b844190
|
Nodes in the pseudo-filesystem can now be renamed or moved within the pseduo-filesystem
|
2014-02-19 13:14:39 -06:00 |
|
Gregory Nutt
|
b39f432020
|
mkdir can now be used to create empty directories in the pseudo-filesystem.
|
2014-02-19 10:30:50 -06:00 |
|
Gregory Nutt
|
b70ce5f634
|
rmdir now may be used to remove empty nodes from the pseudo-filesystem
|
2014-02-19 10:01:26 -06:00 |
|
Gregory Nutt
|
612d8ed14c
|
NSH: Add a break command; if-then-else and looping behavior can not be configured out of the build for small systems that need minimal scripting capability
|
2014-01-18 09:39:16 -06:00 |
|
Gregory Nutt
|
cfb7c77ed3
|
NSH: Add support for while-do-done and until-do-done loops
|
2014-01-17 15:56:32 -06:00 |
|
Gregory Nutt
|
97e1d8b535
|
Add true and false commands; repartition some logic to better support forthcoming looping
|
2014-01-17 13:24:44 -06:00 |
|
Gregory Nutt
|
65b4921b23
|
Back quoted NSH arguments now functional
|
2014-01-11 09:50:54 -06:00 |
|
Gregory Nutt
|
d499f287ad
|
Add support for backquoated commands as command arguments
|
2014-01-10 18:42:24 -06:00 |
|
Gregory Nutt
|
819a4b5779
|
NSH: Separate command line parsing from command execution. Add support for multiple, semicolone separated commands on each line
|
2014-01-10 15:23:26 -06:00 |
|
Gregory Nutt
|
cdd15a12f6
|
NSH library: Allow USB trace without a USB console
|
2013-11-06 07:09:00 -06:00 |
|
Gregory Nutt
|
ff88e86ef2
|
Add NSH addroute and delroute commands
|
2013-10-05 15:42:20 -06:00 |
|
Gregory Nutt
|
c4e46f5b62
|
Changes to NSH and readline to permit NSH to work on a platform with no file system
|
2013-09-30 11:34:04 -06:00 |
|