This happened frequently for me with Docker Desktop's
/var/run/docker.sock on macOS.
But I believe it can happen on other environments, even with TCP.
Alternatively, this case can be handled by the callback
implementations. But it's simpler to handle the corner case here.
Summary:
- This commit fixes compile warnings with Arm GCC 9.3.1
Impact:
- None
Testing:
- Tested with lm3s6965-ek:discover
- NOTE: need to add the following configs
+CONFIG_EXAMPLES_IPERF=y
+CONFIG_EXAMPLES_IPERFTEST_DEVNAME="eth0"
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
* It doesn't make much sense to have the default values for
these highly environment-dependent settings.
* netutils/netinit/netinit_associate.c calls wpa_driver_wext_associate
if the SSID is not empty. Depending on the environment, it can take
long to fail. It slows down the boot of some configurations
considerably. eg. esp32-devkitc:wapi
wget is missing from some system (like macOS and Windows native),
it's better to use curl to simplify build environment.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
The following nxstyle error is intentionally left.
It's a nested function. I guess nxstyle doesn't support it.
netutils/chat/chat.c:110:8: error: Bad comment alignment
The following nxstyle errors are intentionally left.
The first one is in the copyright notice.
The others are identifiers like ClientData etc.
netutils/thttpd/thttpd.c:10:81: error: Long line found
netutils/thttpd/thttpd.c:99:2: error: Mixed case identifier found
netutils/thttpd/thttpd.c💯2: error: Mixed case identifier found
netutils/thttpd/thttpd.c:131:17: error: Mixed case identifier found
netutils/thttpd/thttpd.c:131:57: error: Mixed case identifier found
netutils/thttpd/thttpd.c:132:36: error: Mixed case identifier found
netutils/thttpd/thttpd.c:133:52: error: Mixed case identifier found
netutils/thttpd/thttpd.c:134:23: error: Mixed case identifier found
netutils/thttpd/thttpd.c:134:63: error: Mixed case identifier found
netutils/thttpd/thttpd.c:527:2: error: Mixed case identifier found
netutils/thttpd/thttpd.c:597:17: error: Mixed case identifier found
netutils/thttpd/thttpd.c:597:57: error: Mixed case identifier found
netutils/thttpd/thttpd.c:608:14: error: Mixed case identifier found
netutils/thttpd/thttpd.c:615:38: error: Mixed case identifier found
netutils/thttpd/thttpd.c:620:14: error: Mixed case identifier found
netutils/thttpd/thttpd.c:625:37: error: Mixed case identifier found
netutils/thttpd/thttpd.c:632:36: error: Mixed case identifier found
netutils/thttpd/thttpd.c:633:52: error: Mixed case identifier found
netutils/thttpd/thttpd.c:643:23: error: Mixed case identifier found
netutils/thttpd/thttpd.c:643:63: error: Mixed case identifier found
netutils/thttpd/thttpd.c:730:35: error: Mixed case identifier found
netutils/thttpd/thttpd.c:739:29: error: Mixed case identifier found
This fixes the case when webclient_set_static_body is used
for data larger than webclient_context::buflen.
Note: as of writing this, webclient_set_static_body is the
only user of body_callback in NuttX apps tree.
Uses logic from apps/fsutils/ipcfg to obtain the IP address configuration from a file, if available. This only effects the behavior of netinit if CONFIG_FSUTILS_IPCFG is selected and if an IP configuration file is available on a file system. Otherwise, it reverts to the preceding behavior.
Also adds definitions to apps/include/fsutils/ipcfg.h to formalize a bit encoding of the prototype which was already in use, but not documented.
Also fixes some bad assertions (duplication of PR #420) and makes use of variable names consistent in ipcfg.h comments and in ipcfg_text implementation.
Highlights:
* TLS support (a hook to allow users to provide TLS implementation)
* ability to add extra request headers
* ability to use PUT method
* ability to report http status
* error handling improvements
Proposed on the ML while ago:
https://www.mail-archive.com/dev@nuttx.apache.org/msg03803.html
The original API is kept for now.
I plan to remove them after adapting the existing users.
(examples in this repo)
Summary:
- dhcpc now uses gethostname() but the hostname might be empty
- This commit fixes this issue
Impact:
- All use cases which use dhcpc
Testing:
- Tested with spresense:wifi
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Adapt to the change in the main repo.
mallinfo is meant to be API compatible with Linux,
where it's provided by malloc.h.
(I think the API actually originated with System V. I don't
remember how it was there though. Anyway, I guess the
compatibility with Linux is more important than System V
these days.)
When recv() failed, the current code assumes the return value
of recv() is a negative errno. It's wrong. Actually the return value
in case of error is -1. The wrong assumption ends up with reporting
EPERM, as EPERM happens to be -(-1).
This commit changes the code to leave the errno set by the failed
recv() as it is. It should be fine as wget_base() has the same
error returning convention as recv(). That is, return -1 (ERROR)
and set errno in the case of failure.
NOTE: the close() after the errout label can also fail and overwrite
the errno. I don't feel it's a big problem as wget_base() doesn't have
any promise about which error should be reported.
http -> https redirection is rather common. The old code was
just broken in that case.
Also, this commit is a step towards https support.
* Switch to netlib_parseurl
* Fix error propagation in wget_parseheaders
* Bail out on a redirect to a URL with unsupported scheme
Not all files were correctly modified when usrsock_rpmsg was moved from apps/system to apps/netutils. Changes were overlooked in the Makefile and Make.defs file.
There were several places where default sector and buffer sizes of 2048 were changed to DEFAULT_TASK_STACKSIZE. This is not correct. This was noted by Xiao Xiang.
This is the companion to PR #766. It removes the CONFIG_CAN_PASS_STRUCT option as recommended by Issue #620
NuttX PR #766 depends on PR being in place but not vice versa. This PR should be merge-able without #766 and then PR #766 should also pass its checks.
Where:
* Under examples and testing
* And the default value is less than 2048
Using a bit more memory for examples and tests should not
be a critical problem.
This commit changes only ones with the default 2048 and
leaves the others.
E.g. this leaves SYSTEM_RAMTEST_STACKSIZE, whose default is 1024.
I guess those need to be inspected one-by-one.
Recent change from Xiao Xiang enabled the SO_REUSEADDR socket option unconditionally. This, of course, causes link time failures if socket options are not enabled:
apps/netutils/telnetd/telnetd_daemon.c:182: undefined reference to 'setsockopt'.
Observed during build testing with configuration rddrone-uavcan144:nsh
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Check POLLHUP and POLLERR in telnet poll loop
to handle the remote end close correctly
Send "NVT"(network virtual terminal) as the default if getenv("TERM") return NULL
telnet should trigger the error handling if inet_pton return zero
since zero mean the string has format error
Don't return 1 in _environ_telnet to avoid trigger the compression
and remove the redundant TELNET_TELOPT_COMPRESS2 check
Change telnet_error_u to telnet_error_e required by the coding standard
Ensure telnet object get freed before the abnormal exit
The sendmail example hasn't been used in years. I am not sure it was ever debugged. It is so old that it still expects hand editted .config files. As a result, all of the configuration settings were missing from the Kconfig file.
This commit adds the missing apps/examples/sendmail configuration settings so that the example at least builds. I cannot test it because I have no smtp server that I am willing to spam.
This configuration also adds missing configuration dependencies and runs the C files in apps/examples/sendmail and apps/netutils/smtp through nxstyle.
This commit resolves an issue reported by surya prakash rased in the Google group: https://groups.google.com/forum/#!topic/nuttx/idr-M164Y24
apps/netutils/dhcpd/dhcpd.c: Fix unused const variable
dhcpd.c:273:29: warning: 'g_anyipaddr' defined but not used [-Wunused-const-variable=]
static const uint8_t g_anyipaddr[4] = {0, 0, 0, 0};
apps/netutils/dhcpd: Make dhcpd interface configurable
apps/netutils/dhcpd: Lease address directly if hit in address range
apps/netutils/netinit: Initialize dhcpc_state
update the addresses only on request success
NuttX commit 346336bb9e5c9199b82e34d08bf23dd1bc389460 make CONFIG_NET_TCP_READADHEAD unselectable and removed all references to CONFIG_NET_TCP_READHEAD from the the NuttX repositories. However, there was no corresponding removal of CONFIG_NET_TCP_READHEAD from the apps/ repository. As a result, there was logic that depended on the selection of CONFIG_NET_TCP_READHEAD that could never be enabled.
This was found during build testing using the configuration olimex-lpc1766stk/thttpd-binfs. THTTPD was not being build fully because it had dependencies on CONFIG_NET_TCP_READHEAD. There resulted int numerous new warnings and, finally, the error:
(.../apps.examples.thttpd.o): in function `thttp_main':
thttpd_main.c:(.text+0x104): undefined reference to `thttpd_main'
* fix warning: format '%u' expects argument of type 'unsigned int *', but argument 3 has type 'uint16_t *
Change-Id: I3eccf8e2cd917f19b7a9edab233b327297d74bb7
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
* fix warning: format '%ld' expects argument of type 'long int', but argument 2 has type 'int'
Change-Id: Ic59a1e9e49256637fa73459c46b8cded036cf971
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
1. This fixes the issue reported in Bitbucket apps/ Issue 15. That is, if fopen() fails, the NULL stream handle would be used in subsequent logic. The handling of the failure was incomplete.
2. Some of the error handling was fixed. In the event of an error, it was return return an error value ONLY if we failure to report the error and even then the wrong error would be reported. This change now preserves and returns the correct error number that is the root cause of the failure.
3. Ran the file through tools/nxstyle and cleaned up many formatting problems.
1.Remove void cast for function because many place ignore the returned value witout cast
2.Replace void cast for variable with UNUSED macro
Change-Id: Ie644129a563244a6397036789c4c3ea83c4e9b09
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
