Giorgio Groß
|
5f73f290a1
|
Implement powermonitor example for ltc4151 current and voltage monitor
|
2017-07-28 15:26:11 +02:00 |
|
Gregory Nutt
|
915b42f870
|
apps/examples/ipforward: Test extended to test forwarding of ICMPv6 multicast messages.
|
2017-07-09 12:05:23 -06:00 |
|
Gregory Nutt
|
1657d1fff5
|
apps/examples/ipforward: A few fixes, but still no cigar.
|
2017-07-07 17:32:37 -06:00 |
|
Gregory Nutt
|
37bb767089
|
Completes code for apps/examples/ipforward. Still untested.
|
2017-07-07 15:00:00 -06:00 |
|
Gregory Nutt
|
47a42852e5
|
apps/examples/ipforward: Add beginning of an IP forwarding example using only TUN devices.
|
2017-07-07 15:00:00 -06:00 |
|
Gregory Nutt
|
3e37dbc4ab
|
apps/examples/nettest: Fix incorrectly named file.
|
2017-07-05 12:52:46 -06:00 |
|
Gregory Nutt
|
abc01c0e5b
|
apps/examples/keypadtest: REMOVED and warehoused in the Obsoleted repository. This was just a bad clone of apps/examples/hidkbd for a keypad driver that was removed years ago. It also uses illegal function calls into the OS. So it has no purpse: It is redundant, it uses illegal interfaces, and is a test for non-existent code.
|
2017-07-04 15:57:30 -06:00 |
|
Gregory Nutt
|
9aa35b2799
|
apps/examples/thttpd: Remove the netstats demo. This depends on an illegal function call and cannot be supported. That example could be replaced with logic that uses the procfs network entries as was done for NSH which had the same issue. But I am too lazy to implement that
|
2017-07-01 08:03:54 -06:00 |
|
Gregory Nutt
|
28415d662b
|
netutils/telnetd and users of telnetd: Add support for IPv6.
|
2017-06-27 09:14:13 -06:00 |
|
Gregory Nutt
|
342de81641
|
NSH library: Add a Telnetd command. This is needed when network initialization is deferred. In that case, telnet daemon cannot be started until the network is finally initialized. The telnetd command was added just for that case: So that the telnet daemon can be started from the NSH command line after the network is configured.
|
2017-06-26 18:00:13 -06:00 |
|
Gregory Nutt
|
ace5bdc7c0
|
examples/nettest: Add more printf output
|
2017-06-26 10:54:32 -06:00 |
|
Gregory Nutt
|
6b25b0d65e
|
examples/nettest: Fix some printf output
|
2017-06-25 13:01:21 -06:00 |
|
Gregory Nutt
|
664ab42da7
|
examples/udp and examples/nettest: Fix some naming collisions; examples/nettest: Fix some build issues with two targets.
|
2017-06-25 09:15:27 -06:00 |
|
Gregory Nutt
|
b868fbe879
|
examples/nettest: The send buffer size is now a configuration option.
|
2017-06-24 09:49:44 -06:00 |
|
Gregory Nutt
|
3c97bfeae6
|
examples/nettest: Fixes for building with loopback device again after the last changes.
|
2017-06-23 19:14:39 -06:00 |
|
Gregory Nutt
|
a3ac695f17
|
examples/nettest: Add support for both enpoints on target boards vs. one on a target and one on the host PC.
|
2017-06-23 18:12:34 -06:00 |
|
Gregory Nutt
|
1c0f237c06
|
examples/nettest: More prep for a second target
|
2017-06-23 15:49:27 -06:00 |
|
Gregory Nutt
|
cde3cb1544
|
Forgot to add files before last commit.
|
2017-06-23 12:30:11 -06:00 |
|
Gregory Nutt
|
a0251ae974
|
examples/nettest: Fix client/server naming confusion; add command line option to select the server address on the target; examples/udp: Fix naming of a configuration setting
|
2017-06-23 12:21:13 -06:00 |
|
Gregory Nutt
|
c88cf75064
|
examples/nettest: Separate out network initialization so that it may, eventually, be used by both a target server and a target client.
|
2017-06-23 11:40:02 -06:00 |
|
Gregory Nutt
|
41457d6fe8
|
examples/nettest: Renaming some files to prevent name collision in libapps.a and to prepare to support target boards on both ends of the test
|
2017-06-23 11:23:43 -06:00 |
|
Gregory Nutt
|
4f64213758
|
examples/udp: Renaming some files to prevent name collision in libapps.a
|
2017-06-23 10:58:41 -06:00 |
|
Gregory Nutt
|
593f224950
|
Merge remote-tracking branch 'origin/master' into ieee802154
|
2017-06-20 15:11:33 -06:00 |
|
Gregory Nutt
|
c0286c1276
|
examples/udp: Port numbers need to be configurable to work with 6LoWPAN. Need to bind the client socket to a port number. This was not required before so is a apparently a change in the UDP packet dispatch logic.
|
2017-06-20 10:40:09 -06:00 |
|
Gregory Nutt
|
62f2b8a7cd
|
examples/smart: Fix some compilation errors. Obviously this test has not been used in a LONG time.
|
2017-06-20 07:08:27 -06:00 |
|
Gregory Nutt
|
3858a4afd5
|
examples/udp: Server IP address may not be provided on the command line
|
2017-06-19 13:29:58 -06:00 |
|
Gregory Nutt
|
d1fb6dec09
|
examples/udp: Change build so that both server and client can be on a target, rather than one on the target one on the host PC.
|
2017-06-19 11:58:56 -06:00 |
|
Gregory Nutt
|
bb95584aed
|
examples/udp: Fixe registration as a built-in program; Change some naming to make room for a second target. Current one endpoint is the target and one is the host. This will (eventually) allow two targets to be both endpoints of the test.
|
2017-06-19 11:03:10 -06:00 |
|
Gregory Nutt
|
7bee5ecec5
|
examples/udp: Add configurable network device name; Add option to suppress network initialization which is not needed if started by NSH or for 6LoWPAN.
|
2017-06-19 09:46:40 -06:00 |
|
Daniel Agar
|
ecab40da6a
|
remove extra semicolons
|
2017-06-04 12:25:32 -04:00 |
|
Gregory Nutt
|
2984fa3911
|
apps/system/dhcpc: Add a command to renew or establish a lease on an IPv4 address.
|
2017-05-21 10:51:26 -06:00 |
|
Sebastien Lorquet
|
ea1025ead2
|
DHCPC: Remove hard-coded interface device. Now passed as a parameter to dhcpc_open().
|
2017-05-19 15:31:22 -06:00 |
|
Sebastien Lorquet
|
297844b1ce
|
Fix comments formatting
|
2017-05-19 17:50:26 +02:00 |
|
Sebastien Lorquet
|
aefddc3648
|
Second batch of changes (no problems)
|
2017-05-19 17:37:17 +02:00 |
|
Sebastien Lorquet
|
caeb6b32fd
|
First batch of changes
|
2017-05-19 17:30:26 +02:00 |
|
Sebastien Lorquet
|
60ca4a1ef4
|
Ensure netlib will not be broken when setip will not bring the network up anymore
|
2017-05-19 17:13:27 +02:00 |
|
Juha Niskanen
|
0bcd50d7a1
|
apps/: Make more globals static to avoid name clashes
|
2017-05-19 07:13:12 -06:00 |
|
Alan Carvalho de Assis
|
22f48cfb5e
|
apps/examples/can: ix can example app to print data when CONFIG_EXAMPLE_CAN_READ is defined
|
2017-05-17 16:07:34 -06:00 |
|
EunBong Song
|
c82d8b61b9
|
apps/examples/mtdpart: Prevent part array overflow. mtdpart examples create partions and allocate from 1 index not a 0 index to part[] array. This cause buffer overflow for part array. This change fixes this problem.
|
2017-05-17 08:16:45 -06:00 |
|
Gregory Nutt
|
e8f3d7f46b
|
apps/examples/nettest: Fix an error in pre-processor expression.
|
2017-05-13 17:51:37 -06:00 |
|
Gregory Nutt
|
b08ea68a33
|
Move prototype from nuttx/include/nuttx/arch.h to apps/include/platform/cxxinitialize.h
|
2017-05-13 16:53:33 -06:00 |
|
Alan Carvalho de Assis
|
8011648ad0
|
Fix to use the new canardInit() function
|
2017-05-12 16:58:53 -03:00 |
|
Alan Carvalho de Assis
|
ed19c87029
|
Fix the new can.h header location
|
2017-05-12 11:58:57 -03:00 |
|
Gregory Nutt
|
13911d9b17
|
Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they.
|
2017-05-11 13:40:03 -06:00 |
|
Juha Niskanen
|
478049fc4f
|
examples/configdata: add stacksize and priority
|
2017-05-10 08:44:01 -06:00 |
|
Gregory Nutt
|
f473842f96
|
Fix some calls to task_create(): argv[0] is the first parameter, not the name of the task.
|
2017-05-09 10:59:24 -06:00 |
|
Juha Niskanen
|
4d09ebcaec
|
examples: random: avoid stack overflows
|
2017-04-26 10:32:20 -06:00 |
|
Gregory Nutt
|
9a49304527
|
examples/hidkbd: Add some missing configuration settings.
|
2017-04-18 07:24:15 -06:00 |
|
Juha Niskanen
|
65d59f8458
|
examples/ostest: clarify when pthread clean-up test mutex need to remain usable
|
2017-04-12 06:47:07 -06:00 |
|
Gregory Nutt
|
cfc71db80c
|
pthreads: Backed most of last pthread changes. Found the 'real' root poblem. A one like error in pthread_mutex.c.
|
2017-04-10 09:51:44 -06:00 |
|