Commit Graph

2108 Commits

Author SHA1 Message Date
Xiang Xiao
6ddbffd200 examples/pty_test: Remove O_NONBLOCK from open
to avoid the log storm:
ERROR Failed to read from serial: 11
ERROR Failed to read from serial: 11
ERROR Failed to read from serial: 11
ERROR Failed to read from serial: 11
ERROR Failed to read from serial: 11
...

Change-Id: I821743411c33b5412165f1e9020b6c9ce6c24660
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-01-13 16:40:18 +08:00
Nathan Hartman
538c757340 apps/examples/webserver: nxstyle fixes
apps/examples/webserver/webserver_main.c:

    * Fix nxstyle errors.
2021-01-03 21:10:38 -06:00
Nathan Hartman
819454ee6e apps/examples/webserver: When NSH app, allow terminating
The examples/webserver app can be built in two modes:

    (1) in standalone mode, or
    (2) as a NSH built-in app.

When run in standalone mode, the webserver program is responsible for
bringing up the network (including DHCP if configured).  Also, the
webserver program must never exit, so if httpd fails (i.e., if
httpd_listen() returns), webserver_main() goes into an endless loop.

When run as a NSH built-in app, network bring-up is the responsibility
of other processes and the webserver program assumes the network is
already properly configured when it starts.  Also, if httpd_listen()
returns, the webserver program should terminate.

Prior to this change, the webserver program would *not* terminate,
even when running as a NSH built-in app.  For example:

    nsh> webserver &
    webserver [6:100]
    nsh> Starting webserver

    nsh> kill -9 6
    nsh> webserver_main: Still running
    nsh> webserver_main: Still running
    nsh> webserver_main: Still running
    nsh> webserver_main: Still running

The line "webserver_main: Still running" would be forever printed
every 3 seconds, however httpd_listen() is no longer running and the
webserver is not functional.

This change makes the webserver play nicely when running as a NSH
built-in app.  With this change applied:

    nsh> webserver &
    webserver [6:100]
    nsh> Starting webserver

    nsh> kill -9 6
    nsh> webserver_main: Exiting

apps/examples/webserver/webserver_main.c:

    * main(): Infer from CONFIG_NSH_BUILTIN_APPS if this is a
      standalone program or a NSH built-in app.  (See [1], where
      similar logic was added to decide whether to do network bring-up
      or not.)  If standalone, run forever as before.  If built-in
      app, exit when httpd terminates.

References:
[1] Commit 3a21b0b222
2021-01-03 21:10:38 -06:00
yjdwbj
92cfd092f7 added: Using nRF24L01+ as A Bluetooth Low Energy Broadcaster/Beacon 2020-12-29 21:13:17 -08:00
Huang Qi
3040c59ae9 Replace all wget with curl
wget is missing from some system (like macOS and Windows native),
it's better to use curl to simplify build environment.

Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
2020-12-21 22:45:46 -06:00
Sara Souza
cb1a424bc1 examples/readme.txt: Added information about watcher example. 2020-12-18 09:10:33 -03:00
Sara Souza
c3494c310a examples: Added watcher and watched examples. 2020-12-18 09:10:33 -03:00
Juha Niskanen
5105474e77 examples/ftpc: proper dual-stack support, also fix getopt re-entrancy issues
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
2020-12-16 00:40:52 -06:00
John Bampton
db0b595b4b Remove unneeded semicolons and parentheses from Python files 2020-12-12 19:20:38 +01:00
YAMAMOTO Takashi
2bafb70ce1 examples/touchscreen/tc_main.c: Fix a syslog format 2020-12-04 00:04:35 +01:00
Matias N
02c3298fca LVGL: use NuttX's printf() 2020-11-30 22:28:29 -06:00
Diego Herranz
e066cd177c examples/pwm: fix style issue found in CI 2020-11-29 21:59:39 +01:00
Diego Herranz
37c8e5486c examples/pwm: fix help message
- Fix bug for multiple PWM outputs (CONFIG_PWM_MULTICHAN). Wrong define
was in use and only the information about the first channel was shown.
- Fix formatting (a few line breaks and spaces missing).
2020-11-29 21:59:39 +01:00
chao.an
fe915679b1 style/Document: remove unnecessary trailing whitespace
N/A

Signed-off-by: chao.an <anchao@xiaomi.com>
2020-11-28 12:20:10 +01:00
chao.an
b5692d8034 style/code: remove unnecessary trailing whitespace
N/A

Signed-off-by: chao.an <anchao@xiaomi.com>
2020-11-28 12:20:10 +01:00
Xiang Xiao
d64929d736 Fix nxstyle warning
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-11-28 12:19:39 +01:00
Xiang Xiao
12a5a5cce9 examples: Ignore the default action if app call sigwait
Because the configured signo may have the default action(e.g. SIGPIPE),
and then will generate the bad side effect before the caller wakeup.

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-11-28 12:19:39 +01:00
Xiang Xiao
0eac035245 examples/cctye: change std::isascii to isascii
since isascii isn't a standard defined function and then
may not exist in all cctype header file(e.g. libc++):
cctype_main.cxx: In function 'int cctype_main(int, char**)':
cctype_main.cxx:64:45: error: 'isascii' is not a member of 'std'; did you mean 'isascii'?
   64 |                       std::isspace(i), std::isascii(i), std::isprint(i), std::isgraph(i),
      |                                             ^~~~~~~

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I8c4fd5ccf120ae5a1566cd4d90695e47ffc30cad
2020-11-27 09:48:40 +09:00
Xiang Xiao
24b6f9199a examples/mld: Fix undefined reference to `mld_catfile'
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I0948b75fe3aea2351c3584cda9bcb7dd41cdd1f9
2020-11-24 19:33:57 +01:00
Xiang Xiao
a4ae159277 examples/i2schar: Fix the compile error
2schar_main.c: In function 'parse_args':
i2schar_main.c:199:20: error: 'struct i2schar_state_s' has no member named 'rxcount'
  199 |             i2schar->rxcount = (uint32_t)value;
      |                    ^~
i2schar_main.c:211:20: error: 'struct i2schar_state_s' has no member named 'txcount'
  211 |             i2schar->txcount = (uint32_t)value;
      |                    ^~
i2schar_main.c: In function 'i2schar_main':
i2schar_main.c:276:16: error: 'struct i2schar_state_s' has no member named 'rxcount'
  276 |       g_i2schar.rxcount = CONFIG_EXAMPLES_I2SCHAR_RXBUFFERS;
      |                ^

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ie85a9bc46516f44e4a286da3d40f1b02a2bbfde0
2020-11-24 04:07:55 -08:00
Xiang Xiao
736a21f0d5 examples/chrono: Rename button_daemon to chrono_daemon
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I1aaf0a6ec8466c35c96a35b30896def7917c8c03
2020-11-24 04:07:36 -08:00
Xiang Xiao
54d5def4d5 examples/chrono: Fix error: 'CONFIG_EXAMPLES_SLCD_DEVNAME' undeclared
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I04c09878ec55cbf910159ab84e0b402cc94dad9b
2020-11-24 04:07:36 -08:00
Philippe Coval
4e4c92fa98 fxos8700cq_test: Adjust rate and lint json output
Change-Id: Iab80381e4f451ac186515cd5593434d80e4c7421
Relate-to: https://github.com/rzr/aframe-smart-home/issues/3
Signed-off-by: Philippe Coval <rzr@users.sf.net>
2020-11-17 20:11:38 -08:00
YAMAMOTO Takashi
2d4d8aa643 examples/touchscreen/tc_main.c: Fix a printf format warning 2020-11-15 21:33:25 -08:00
YAMAMOTO Takashi
3690669242 examples/fboverlay/fboverlay_main.c: Fix a printf format warning 2020-11-15 19:43:36 -08:00
YAMAMOTO Takashi
c408462892 examples/romfs/romfs_main.c: Fix a printf format warning 2020-11-14 17:49:14 -08:00
YAMAMOTO Takashi
473fef4e58 examples/romfs/romfs_main.c: Appease nxstyle 2020-11-14 17:49:14 -08:00
YAMAMOTO Takashi
fa727e08f1 examples/fboverlay/fboverlay_main.c: Fix printf format warnings 2020-11-14 17:49:14 -08:00
YAMAMOTO Takashi
0d3fde2d6b examples/media/media_main.c: Fix printf format warnings 2020-11-14 17:49:14 -08:00
YAMAMOTO Takashi
780891f8aa examples/media/media_main.c: Appease nxstyle 2020-11-14 17:49:14 -08:00
Alan C. Assis
03284a07b9 Fix license headers on Make.defs and Makefile 2020-11-13 05:52:38 -08:00
Alan C. Assis
048c44cd61 Add ESP32 High Memory Application Example 2020-11-13 05:52:38 -08:00
YAMAMOTO Takashi
590e6432cb examples/udp/udp_client.c: Fix a printf format warning 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
4f99572f65 examples/chrono/chrono_main.c: Fix a few printf format warnings 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
a0c7a719c4 examples/chrono/chrono_main.c: Appease nxstyle 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
229d62eddb examples/mount/mount_main.c: Fix printf format warnings 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
e2b94845b8 examples/can/can_main.c: Fix printf format warnings 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
8532f0ee96 examples/ina219/ina219_main.c: Fix a printf format warning 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
e4823bc62c examples/bmp180/bmp180_main.c: Fix a printf format warning 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
1c30ff6fe4 examples/dac/dac_main.c: Fix a printf format warning 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
31118b0a94 examples/dac/dac_main.c: Appease nxstyle 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
b2299b4c8f examples/can/can_main.c: Fix printf format warnings 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
ff130be078 examples/fboverlay/fboverlay_main.c: Fix printf format warnings 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
20c7a06a84 examples/fboverlay/fboverlay_main.c: Appease nxstyle 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
379c0c1fd4 examples/fb/fb_main.c: Fix printf format warnings 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
69b6bb32a8 examples/nrf24l01_term/nrf24l01_term.c: Fix a printf format warning 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
2ff55ac151 examples/nrf24l01_term/nrf24l01_term.c: Appease nxstyle
Still has a few errors because of include/nuttx/wireless/nrf24l01.h.

examples/nrf24l01_term/nrf24l01_term.c:125:33: error: Mixed case identifier found
examples/nrf24l01_term/nrf24l01_term.c:129:15: error: Mixed case identifier found
2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
0b792be90a examples/pwm/pwm_main.c: Fix printf format warnings 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
acc750c8d6 examples/can/can_main.c: Fix printf format warnings 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
a9e8b5c3b0 examples/can/can_main.c: Appease nxstyle 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
4ff27f2a03 examples/serialrx/serialrx_main.c: Fix a printf format warning 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
575063150d examples/serialrx/serialrx_main.c: Appease nxstyle 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
6d2bba1004 examples/pwlines/pwlines_update.c: Fix a printf format warning 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
2556c6f800 examples/pwlines/pwlines_update.c: Appease nxstyle 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
20b7b28f55 examples/bridge/bridge_main.c: Fix printf format warnings 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
c3e63c2a3b examples/bridge/bridge_main.c: Appease nxstyle 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
5a766cd93b examples/elf/elf_main.c: Fix a printf format warning 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
1723a68b0a examples/posix_spawn/spawn_main.c: Fix a type mismatch 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
67f18f8f2c examples/touchscreen/tc_main.c: Fix a printf format warning 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
c8f2f0f262 examples/touchscreen/tc_main.c: Appease nxstyle 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
89a4d02fce examples/adc/adc_main.c: Fix a printf format warning 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
5576c127fd examples/adc/adc_main.c: Appease nxstyle 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
7fa6f69756 examples/sx127x_demo/sx127x_demo.c: Fix printf format warnings 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
53f9f600d2 sx127x_demo.c: Appease nxstyle 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
c5c327ab02 examples/gpio/gpio_main.c: Fix a printf format warning 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
99884e40f1 examples/buttons/buttons_main.c: Fix a printf format warning 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
700b10f2aa examples/buttons/buttons_main.c: Appease nxstyle 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
54cb3ca933 examples/mtdrwb/mtdrwb_main.c: Fix a printf format warning 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
3993e99471 examples/mtdrwb/mtdrwb_main.c: Appease nxstyle 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
ffc32ad70d examples/mtdpart/mtdpart_main.c: Fix printf format warnings 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
2aa2e0d897 examples/mtdpart/mtdpart_main.c: Appease nxstyle 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
20b0ebfd08 examples/mount/mount_main.c: Fix fprintf format warnings 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
175432f54b examples/pf_ieee802154/pf_client.c: Fix a printf format warning 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
16f805cb22 examples/pf_ieee802154/pf_client.c: Appease nxstyle 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
0d09a09f33 examples/module/module_main.c: Fix printf format warnings 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
4736d33410 examples/ipforward/ipforward.c: Fix printf format warnings 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
dcfebf1cea examples/ipforward/ipforward.c: Appease nxstyle 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
5b1eeb5cae examples/nxlines/nxlines_bkgd.c: Fix printf format warnings 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
5ee054186c examples/nxlines/nxlines_bkgd.c: Appease nxstyle 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
862a9fcbda examples/pwm/pwm_main.c: Fix printf format warnings 2020-11-13 05:51:23 -08:00
YAMAMOTO Takashi
b04e19ffc7 examples/pwm/pwm_main.c: Appease nxstyle 2020-11-13 05:51:23 -08:00
saramonteiro
2e8f068a61 examples/watchdog/watchdog_main.c: Elapsed var is now being updated through clock 2020-11-07 23:36:14 -08:00
Subhra Sankha Sarkar
c431c25d14 Fix for sim:mount selftest failure 2020-11-05 18:44:15 -08:00
Matias N
0d7ef382c8 hello: update to Apache license 2020-10-31 09:27:23 -07:00
Matias N
5bcaeff541 lvgl: use malloc/free for memory handling and "tickless" tick interface
This makes LVGL use malloc/free to handle its memory (instead of
their own memory handling) and supports a tick interface by which
LVGL can ask NuttX the elapsed time, instead of having to periodically
"tick" LVGL internal time in a thread.
2020-10-29 22:26:32 -07:00
Xiang Xiao
e76ab9c868 Remove all fclose with stdin, stdout and stderr
since it is wrong to close the builtin stream and specially note
https://pubs.opengroup.org/onlinepubs/9699919799/functions/fclose.html:

Since after the call to fclose() any use of stream results in
undefined behavior, fclose() should not be used on stdin, stdout,
or stderr except immediately before process termination (see XBD
Process Termination), so as to avoid triggering undefined behavior
in other standard interfaces that rely on these streams. If there
are any atexit() handlers registered by the application, such a
call to fclose() should not occur until the last handler is
finishing. Once fclose() has been used to close stdin, stdout, or
stderr, there is no standard way to reopen any of these streams.

and it is also unnecessary because the stream always get flushed.

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-10-29 20:43:59 +09:00
saramonteiro
2279eeb0a7 Examples/WDT: Added argument to select devname 2020-10-27 14:10:35 -03:00
Philippe Coval
9134ecff23 fxos8700cq: Remove unused var
Change-Id: I96821efd5f3ed78da5a51b39972596774f5645cf
Bug: https://github.com/apache/incubator-nuttx/pull/199
Signed-off-by: Philippe Coval <rzr@users.sf.net>
2020-10-22 00:13:14 +08:00
Philippe Coval
0a77cd35d8 fxos8700cq: Select SENSORS if used
SENSORS_FXOS8700CQ needs SENSORS for linking

Change-Id: Ie0f1ba57517f27fa7697b6c8cf7a1f6558107732
Bug: https://github.com/apache/incubator-nuttx/pull/1999
Forwarded: https://github.com/apache/incubator-nuttx/pulls/rzr
Signed-off-by: Philippe Coval <rzr@users.sf.net>
2020-10-21 18:05:25 +08:00
Xiang Xiao
8a63e58936 Change all 'Nuttx' to 'NuttX'
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-10-18 22:27:57 -07:00
Philippe Coval
6ef47323a2 examples: Add fxos8700cq sensor test
It was tested on NXP FRDM-64F:

    nsh> fxos8700cq
    { accel: [2174, 555, -752], magn: [0, 0, 0] }
    { accel: [-300, 547, 1951], magn: [55, -188, 276] }

Change-Id: If5180ce69913cf096e04db7772f3f9dd63f853bd
Bug: https://github.com/apache/incubator-nuttx/issues/1988
Forwarded: https://github.com/apache/incubator-nuttx-apps/pull/428
Signed-off-by: Philippe Coval <rzr@users.sf.net>
2020-10-17 23:47:04 +08:00
Gregory Nutt
a627561c8f apps/fsutils/ipcfg: Add support for IPv6 2020-10-05 00:07:05 +08:00
Gregory Nutt
707e827ded ipcfg: Add hooks for future IPv6 support.
This commit adds structures, modifies function prototypes, and renames data to support the future addition of IPv6 support.  This commit does NOT add that IPv6, only the hooks for backward compatible future support.
2020-10-02 12:30:47 -07:00
YAMAMOTO Takashi
536660d062 examples/wgetjson: Adapt to the new webclient api
tested with:
    CONFIG_EXAMPLES_WGETJSON_URL="http://httpbin.org/get"
    CONFIG_EXAMPLES_WGETPOST_URL="http://httpbin.org/post"
    wgetjson -D
    wgetjson -P -D
    wgetjson -p -D
2020-10-01 15:32:25 +08:00
YAMAMOTO Takashi
b0e7b0011b examples/wget: Adapt to the new webclient api
tested as: "nsh> wget http://example.com/"
2020-10-01 15:32:25 +08:00
YAMAMOTO Takashi
39a1950098 wgetjson: Fix a super confusing printf message 2020-09-30 08:22:16 +02:00
YAMAMOTO Takashi
b05a1f61e2 wgetjson_json_item_scan: fix a NULL dereference
I'm not sure if this is the correct fix.
wgetjson_json_item_callback seems to expect it to be formatted
as "(null)".
2020-09-30 08:22:16 +02:00
YAMAMOTO Takashi
b5d7004a8d examples/wgetjson/Kconfig: fix a typo 2020-09-30 08:22:16 +02:00
Gregory Nutt
5e1ba408b4 Add IPv4 Configuration File Access Helper
This commit adds support to access an IPv4 Configuration file similar to the Linux dhpc.client ipfcg file.  This version, tailored for deeply embedded systems supports several options to tailor the file and file access to different environments.  It supports:

- Writable as well as read-only configuration files.
- ASCII human readable files as well as smaller binary files.
- It supports using character driver access to constrained media (such as EEPROM).
- Add examples/ipcfg to exercise IPv4 Configuration File support
2020-09-29 12:24:07 -07:00
YAMAMOTO Takashi
f9ae5608ef examples/wgetjson/wgetjson_main.c: nxstyle fixes
The rest of errors are about cJSON identifiers:

    wgetjson_main.c:181:2: error: Mixed case identifier found
    wgetjson_main.c:183:9: error: Mixed case identifier found
    wgetjson_main.c:186:37: error: Mixed case identifier found
    wgetjson_main.c:190:12: error: Mixed case identifier found
    wgetjson_main.c:191:6: error: Mixed case identifier found
    wgetjson_main.c:203:39: error: Mixed case identifier found
    wgetjson_main.c:256:36: error: Mixed case identifier found
    wgetjson_main.c:283:2: error: Mixed case identifier found
    wgetjson_main.c:286:9: error: Mixed case identifier found
    wgetjson_main.c:289:37: error: Mixed case identifier found
    wgetjson_main.c:295:6: error: Mixed case identifier found
2020-09-29 14:15:26 +08:00
saramonteiro
c4ed4445f4 fixed dev name size 2020-09-27 18:18:13 -03:00
saramonteiro
d2463021a9 fixed some coding styles issues 2020-09-27 18:18:13 -03:00
saramonteiro
32f193a7e2 Added timer device path as a CLI option 2020-09-27 18:18:13 -03:00
Gregory Nutt
ad233b5a97 apps/examples/nxterm: Remove duplicated fflush() call.
fflush(stdout) was called twice to back-to-back.
2020-09-22 10:28:54 -07:00
chao.an
0f524ca013 examples/fb: correct the munmap(2) parameter type
fb_main.c: In function 'fb_main':
fb_main.c:473:15: warning: passing argument 1 of 'munmap' makes pointer from integer without a cast [-Wint-conversion]
  473 |   munmap(state.fd, state.fbmem);
      |          ~~~~~^~~
      |               |
      |               int
In file included from fb_main.c:43:
/home/archer/code/upload/incubator-nuttx/include/sys/mman.h:177:22: note: expected 'void *' but argument is of type 'int'
  177 | int munmap(FAR void *start, size_t length);
      |                ~~~~~~^~~~~
fb_main.c:473:25: warning: passing argument 2 of 'munmap' makes integer from pointer without a cast [-Wint-conversion]
  473 |   munmap(state.fd, state.fbmem);
      |                    ~~~~~^~~~~~
      |                         |
      |                         void *
In file included from fb_main.c:43:
/home/archer/code/upload/incubator-nuttx/include/sys/mman.h:177:36: note: expected 'size_t' {aka 'unsigned int'} but argument is of type 'void *'
  177 | int munmap(FAR void *start, size_t length);
      |                             ~~~~~~~^~~~~~

Signed-off-by: chao.an <anchao@xiaomi.com>
2020-09-17 04:42:06 -07:00
Xiang Xiao
ecae66fe59 Replace all CONFIG_NFILE_STREAMS with CONFIG_FILE_STREAM
follow up the kernel side change

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ic27ad65d7cc2ea570921e0c17098dcb6bfe1893a
2020-09-11 17:57:58 +08:00
Xiang Xiao
9d80399bd5 nsh: Accept the command line arguments like sh
Usage: nsh [<script-path>|-c <command>]

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ifb76b27e7fd09d26b1f6e48c391fed0972018041
2020-08-19 14:32:53 -07:00
SPRESENSE
78e8090842 examples: wget: Fix nxstyle issues 2020-08-18 10:07:47 -05:00
SPRESENSE
10386cf5b5 examples/wget: wget example to work without NSH_NETINIT config
- Network initialization codes are not needed
  with NSH_NETINIT config.
- Suppport commandline argument to set the URL to get.
- Change stack size to independent
2020-08-18 10:07:47 -05:00
Huang Qi
08c5998472 graphics/lvgl: Specific LVGL version by kconfig
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
2020-08-14 16:02:25 +01:00
Xiang Xiao
e6c5ff9208 Remove the unnecessary touch and clean from Makefile
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-08-11 19:10:19 +01:00
Xiang Xiao
4136d42596 Change FBIO_UPDATE argument from nxgl_rect_s to fb_area_s
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ibaf4b0180afecdcd3248693a3092c8a23e22a2fa
2020-08-10 10:45:37 +01:00
SPRESENSE
eaeceb516b apps/examples/usrsocktest: Fix nxstyle issue 2020-08-06 20:52:09 +09:00
SPRESENSE
f29c0dabd4 apps/examples/usrsocktest: Add test scenario of recv
Add test scenario of recv for MSG_PEEK flag.
2020-08-06 20:52:09 +09:00
SPRESENSE
4bd506b7f5 apps/examples/usrsocktest: Add MSG_PEEK flag support
Do not decrement the recv_avail_bytes if MSG_PEEK flag is specified.
2020-08-06 20:52:09 +09:00
SPRESENSE
63cd701958 Makefile: Unify ROOTDEPPATH into DEPPATH
DEPPATH is commonly used in nuttx repo, so it to be the same with them.
2020-07-29 15:22:20 +02:00
Masayuki Ishikawa
e0c27e1d21 examples: i2sloop: Replace license header with Apache License 2.0
Summary:
- This commit replaces license headers under examples/i2sloop.

Impact:
- No impact

Testing:
- Buid check only

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-07-29 01:05:31 -05:00
Maciej Wójcik
21049ece6e Rewritten READMEs to Markdown 2020-07-25 01:01:51 -07:00
Maciej Wójcik
51e6645f71 Rename README and README.txt to README.md 2020-07-25 01:01:51 -07:00
Maciej Wójcik
d85cbea7f8 Don't copy header outside of LVGL, export LVGL, add README, fix example 2020-07-16 09:16:20 -05:00
Xiang Xiao
4758151b86 examples/nrf24l01_term: Fix the nxsytyle warning 2020-07-12 15:59:54 +01:00
Xiang Xiao
942f32e22a Fix nxsytle warning
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I36099dc6c07c7ada2f9fcb06fe0267b8d213a61a
2020-07-12 13:56:00 +01:00
Xiang Xiao
deaa6c5b7b build: Replace $(TOPDIR)/Make.defs with $(APPDIR)/Make.defs
and move NUTTXLIB defintion to the common place

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-07-09 15:17:37 -03:00
Beat Küng
6daab509ca gpio: fix code style (long lines) 2020-07-09 15:17:13 -03:00
Beat Küng
31d198f5b6 gpio: add new GPIO pin types
NuttX PR: https://github.com/apache/incubator-nuttx/pull/1374
2020-07-09 15:17:13 -03:00
Xiang Xiao
4e10b692f8 example/helloxx: Remove EXAMPLES_HELLOXX_NOSTACKCONST
since this config doesn't appear inside examples/helloxx/Kconfig anymore and
there is any c++ compiler can't construct the stack object as far as I know

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I0297d192df3beaa78ae7ee75f24ae51476bb30a9
2020-07-02 08:59:02 +02:00
Xiang Xiao
9df0272279 apps: Let c++ examples/testing depends on UCLIBCXX or LIBCXX
since the test should work with either uClibc++ or libcxx

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ie6d7b1706314cbe82d4e89eb2d5c47ed36118ea4
2020-07-02 08:47:40 +02:00
Xiang Xiao
b217de70e5 apps: Remove all stuff related to CONFIG_xxx_CXXINITIALIZE
since it is moved to the central place in nuttx side instead

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I544d6110f1ca6460f7c82f970870aa9b1e7ab3dd
2020-07-01 10:03:12 -06:00
Alin Jerpelea
f571af1b2b Examples: camera: add a simple camera snapshot example
The camera example will take the specified number of pictures (default 10)
then will exit

To enable the example add the following line in your defconfig
EXAMPLES_CAMERA

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2020-07-01 07:53:25 +09:00
chao.an
8750db6090 examples: fix nxstyle warning
Change-Id: I617d9033604a4a85ae065ed67b9aa6128218ae49
Signed-off-by: chao.an <anchao@xiaomi.com>
2020-06-29 21:07:04 -05:00
chao.an
24407f16f5 net/sockopt: change the socket option style from Linux to BSD
Linux Programmer's Manual
...
IP(7)
...
NOTES
...
    Using the SOL_IP socket options level isn't portable;
    BSD-based stacks use the IPPROTO_IP level.

Change-Id: I143477d8884dd44913c5685028ee62854e4c11ac
Signed-off-by: chao.an <anchao@xiaomi.com>
2020-06-29 21:07:04 -05:00
Huang Qi
32a2207e86 examples/lvgldemo: Change to latest official release 2020-06-17 12:13:36 -03:00
Huang Qi
7a85bc75dc graphics/lvgl: Bump lvgl version to 7.0.2 2020-06-17 12:13:36 -03:00
Matias Nitsche
db338bfbb2 pty: nxstyle fixes 2020-06-15 21:22:14 +01:00
Matias Nitsche
f88e4af8af pty: support waiting for underlying serial device to appear, useful for pty over USBDEV serial device 2020-06-15 21:22:14 +01:00
Matias Nitsche
b888f5f5e6 pty: pause() instead of sleep for long time 2020-06-15 21:22:14 +01:00
Matias Nitsche
49e2c5fe70 bmp180: enable use for BMP280 as well 2020-06-15 20:11:40 +01:00
YAMAMOTO Takashi
faba0249c1 Include malloc.h instead of stdlib.h for mallinfo()
Adapt to the change in the main repo.

mallinfo is meant to be API compatible with Linux,
where it's provided by malloc.h.

(I think the API actually originated with System V. I don't
remember how it was there though. Anyway, I guess the
compatibility with Linux is more important than System V
these days.)
2020-06-15 07:21:52 -06:00
Ouss4
6fd57ba071 examples/pca9635/pca9635_main.c: The brightness struct name was changed
in the OS driver, thus this example needs to follow suit.
2020-06-12 15:01:36 -06:00
liuhaitao
0b322c9784 examples/thttpd: update Makefile etc to fix build break
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
2020-06-10 21:31:51 +08:00
Huang Qi
afaf013832 examples/lvgldemo: Make touch calibration optional
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
2020-06-10 08:44:36 -03:00
liuhaitao
2c924f657f examples/nxflat: update Makefile etc to fix build break
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
2020-06-09 21:40:20 +08:00
Xiang Xiao
3f6343d3e7 examples/buttons: Switch dependence from ARCH_HAVE_BUTTONS to BUTTONS
application just use BUTTONS ioctl and shouldn't take care the implementation detail

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Ia4d615700de1ac17302ab9b6379340fb81e69d86
2020-06-06 01:03:20 +01:00
Xiang Xiao
8e9e49a2f8 examples/leds: Switch dependence from ARCH_HAVE_LEDS && !ARCH_LEDS to USERLED
application just use USERLED ioctl and shouldn't take care the implementation detail

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I5b707d86db1bd96d85b6fed1d5a403584739f0d7
2020-06-06 01:03:20 +01:00
Xiang Xiao
8f18b23352 examples: Fix the wrong dependence about config.h
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: Iabedaa5da6439f4bfc34fb861382276446b4224f
2020-06-02 12:49:19 +02:00
Xiang Xiao
d03ff1bde6 build: Remove the duplicated mksymtab.sh
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-24 08:26:55 -06:00
Xiang Xiao
69f013e74e build: Remve the unnecessary .gitignore
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-23 15:56:35 +01:00
Xiang Xiao
ea7437c2a8 Fix nxstyle issue
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-22 12:25:09 +01:00
Xiang Xiao
ea135b89c6 build: Replace all -I to INCDIR
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-21 17:43:42 +01:00
Xiang Xiao
ead498a788 build: Remove the workaround for the inexistence of .config/Make.defs
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-21 17:43:42 +01:00
Xiang Xiao
9be0be5d47 build: host executable should use HOSTEXEEXT not EXEEXT
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-19 08:58:10 -06:00
Xiang Xiao
6a26547dec build: Move INCDIROPT to common place
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-18 15:37:24 -06:00
Xiang Xiao
d232823e63 build: Replace WINTOOL with CYGWIN_WINTOOL Kconfig
so the correct value can be determinated by Kconfig system automatically

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-18 15:37:24 -06:00
liuhaitao
79e544f032 exmaples: some nxstyle fixes for module/sotest/thttpd
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
2020-05-15 13:36:05 +08:00
liuhaitao
0c60624276 Update make dependency for elf/module/nxflat/posix_spawn/sotest/thttpd
Update make dependency for elf/module/nxflat/posix_spawn/sotest/thttpd examples which make use of
mksymtab.sh. This could avoid them built twice in 'make depend' and 'make all' which would result
in file truncated build break. Now only build once by 'make all'.

Change-Id: I5d8f1ebbf73e3b12d7d2118f1f51b4233d0ed007
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
2020-05-15 13:36:05 +08:00
Masayuki Ishikawa
ba3baa57a5 examples: ftpc: Fix style violations in ftpc_main.c
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-05-14 18:17:57 -06:00
Masayuki Ishikawa
9a90b65355 examples: ftpc: Fix a compile warning for IPv4 only configuration
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-05-14 18:17:57 -06:00
Xiang Xiao
9d78e5b4c2 Remove executable bit from source code
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-13 06:52:34 -06:00
chao.an
3aefe08cba examples/dhcpd: reuse the router ip/mask from dhcpd lib
Change-Id: I6a9a783b9d9c8b9a4e56a885232a759f0adaeccb
Signed-off-by: chao.an <anchao@xiaomi.com>
2020-05-09 13:31:15 -06:00
chao.an
018c9420ac netutils/dhcpd: cancelable dhcp daemon
Change-Id: Iea3c0b8f91b0d6d8ececcd3932d8756a9d021608
Signed-off-by: chao.an <anchao@xiaomi.com>
2020-05-09 13:31:15 -06:00
Gregory Nutt
baea789137 examples/thttpd/content/tasks/tasks.c: nxstyle check. 2020-05-09 14:55:38 -03:00
Gregory Nutt
3abdf30e8c examples/thttpd/content/tasks/tasks.c: Update OS internal name
This logic uses the OS internal nxsched_foreach() function.  This is a violation of the POSIX OS interface.  But for now, we just update the name.
2020-05-09 14:55:38 -03:00
Pelle
0704bd2e49 Example application for the hdc1008 driver. 2020-05-07 03:09:27 +01:00
Xiang Xiao
7a99d62ca1 Fix nxstyle warning
Signed-off-by: Xiang Xiao <xiaox
iang@xiaomi.com>
2020-05-06 07:31:10 -06:00
Xiang Xiao
8a1f5ee34c debug: Reduce CONFIG_CPP_HAVE_VARARGS usage
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-06 07:31:10 -06:00
Xiang Xiao
cfe030db40 examples: Replace all -luc with -lc
follow up the kernel side change

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-05-02 03:34:25 +01:00
liuhaitao
1fbfa8669c Cleanup testdir dir in make distclean
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
2020-05-01 13:48:39 +08:00
Xiang Xiao
42bde7fb27 examples: Remove the prefix of main from bmi160 and charger
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-30 08:50:20 -06:00
Xiang Xiao
547bad9e2a Remove the unnecessary BUILD_FLAT dependence from Kconfig
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-29 11:46:53 -06:00
Xiang Xiao
dcc620e6b8 Kconfig: Change !BUILD_PROTECTED && !BUILD_KERNEL to BUILD_FLAT
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-29 07:23:51 -06:00
Xiang Xiao
7da4a34aac examples: Remove all '#undef __KERNEL__' from source code
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-28 08:58:14 -06:00
liuhaitao
e8b5c47eb8 examples/unionfs: clean up the residual files after 'make distclean'
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
2020-04-28 13:31:22 +08:00
Xiang Xiao
3bd2bc04b5 examples/unionfs: Remove [a|b]testdir.h in distclean
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-25 20:38:04 -06:00
Gregory Nutt
7b2e06b674 Fix errors from DEFAULT_TASK_SIZE change
There were several places where default sector and buffer sizes of 2048 were changed to DEFAULT_TASK_STACKSIZE.  This is not correct.  This was noted by Xiao Xiang.
2020-04-25 16:13:28 -03:00
Alin Jerpelea
c9eaf0beaa examples: i2sloop: nxstyle fixes
nxstyle fixes for i2sloop exaple

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2020-04-21 16:41:51 -06:00
Alin Jerpelea
3cdb81077b examples: i2schar: nxstyle fixes
nxstyle fixes for i2schar exaples

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2020-04-21 16:41:51 -06:00
Xiang Xiao
0c84e22aaf example: Remove all APPNAME from Makefile
which doesn't use anymore

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-19 10:29:34 -06:00
Xiang Xiao
4431d770b4 .gitignore: Add more entries found during prcheck testing
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-19 10:29:34 -06:00
Xiang Xiao
b813944a7a example/nettest: tcpclient and tcpserver to .gitignore
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-04-19 21:48:38 +08:00
YAMAMOTO Takashi
1b572ff169 Use MODULESTRIP where appropriate 2020-04-17 14:43:33 +08:00
Qi Huang
5018ee264c graphics/littlevgl: Fix lvgl internal warning with patch
examples/lvgldemo: Fix build warning with specific config

Signed-off-by: Qi Huang <huangqi3@xiaomi.com>
2020-04-16 19:06:05 +08:00
liuhaitao
b8dc15f646 examples/thttpd: align to elf/posix_spawn exmaples to fix depend build warning
Build warning logs as below:
arm-none-eabi-gcc: warning: ./hello/Makefile: linker input file unused because linking not done

Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
2020-04-15 11:39:15 -03:00
Qi Huang
771811c1d7 examples/lvgldemo: Fix nxstyle
Signed-off-by: Qi Huang <huangqi3@xiaomi.com>
2020-04-15 11:38:24 -03:00
Qi Huang
2bb4cbf9ca examples/littlevgl: Add missing btn event handler
Signed-off-by: Qi Huang <huangqi3@xiaomi.com>
Change-Id: I4048fbd4907e465fe8f3a1a57c8ff830730a5bc3
2020-04-15 11:38:24 -03:00
Qi Huang
94b8dbe7aa examples/lvgldemo: Port all demos to LVGL V6.1.2
Signed-off-by: Qi Huang <huangqi3@xiaomi.com>
Change-Id: Ie139af71e88d887bffefcd9b97977124c5a9e1c3
2020-04-15 11:38:24 -03:00
Qi Huang
13606dc253 apps/examples/lvgldemo: Port new simple demo from LVGL V6.1.2
Signed-off-by: Qi Huang <huangqi3@xiaomi.com>
Change-Id: I1051edc15b6f66ce34d2f813964e0e8630ec351f
2020-04-15 11:38:24 -03:00
Qi Huang
b7e96b473d apps/examples/lvgldemo: Update the lvgl init procedure
Signed-off-by: Qi Huang <huangqi3@xiaomi.com>
Change-Id: I36d250d7839a86d486dcb8f720fcf12f9b954327
2020-04-15 11:38:24 -03:00
Qi Huang
1fa30e59d3 apps/examples/lvgldemo: Port tp_cal.c for LVGL V6.1.2
Signed-off-by: Qi Huang <huangqi3@xiaomi.com>
Change-Id: I1fead13274822276e08d3f54016b079b174a1544
2020-04-15 11:38:24 -03:00
Qi Huang
25876e8222 apps/examples/lvgldemo: Update fb flush callback for LVGL V6.1.2
Signed-off-by: Qi Huang <huangqi3@xiaomi.com>
Change-Id: I72a6ff628f2ea2b0b505e444c84b266ba3a28d87
2020-04-15 11:38:24 -03:00
Qi Huang
20f3db7317 apps/examples/lvgldemo: Update touchpad read callback for LittleVGL V6.1
Signed-off-by: Qi Huang <huangqi3@xiaomi.com>
Change-Id: I8df8ff81832ce651a4c2678d534a6aeb85cff6a7
2020-04-15 11:38:24 -03:00
Gregory Nutt
58085e5983 Run nxstyle against files modified in previous commit. 2020-04-12 19:17:49 +01:00
Gregory Nutt
f95d753759 Fix warnings noted in PR build checks.
userfs_main.c:547:7: warning: variable 'ret' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
      if (*relpath == '\0')
          ^~~~~~~~~~~~~~~~
    userfs_main.c:564:10: note: uninitialized use occurs here
      return ret;
             ^~~
    userfs_main.c:547:3: note: remove the 'if' if its condition is always false
      if (*relpath == '\0')
      ^~~~~~~~~~~~~~~~~~~~~
    userfs_main.c:543:10: note: initialize the variable 'ret' to silence this warning
      int ret;
             ^
              = 0

    test_motor.c:1068:14: warning: explicitly assigning value of variable of type 'float' to itself [-Wself-assign]
      expected_e = expected_e;
      ~~~~~~~~~~ ^ ~~~~~~~~~~
2020-04-12 19:17:49 +01:00
Gregory Nutt
3e73991857 nxstyle fixes for PR 170 2020-04-11 20:32:53 +01:00
Gregory Nutt
05f2253a33 Remove CONFIG_CAN_PASS_STRUCT
This is the companion to PR #766.  It removes the CONFIG_CAN_PASS_STRUCT option as recommended by Issue #620

NuttX PR #766 depends on PR being in place but not vice versa.  This PR should be merge-able without #766 and then PR #766 should also pass its checks.
2020-04-11 20:32:53 +01:00
Ouss4
d7df165c45 examples/udp: When a host PC is used, take its implementation of hton/ntoh functions. 2020-04-03 18:09:02 -06:00
raiden00pl
dd95e35787 examples/dsptest: fix nxstyle issues 2020-04-03 22:23:23 +01:00
YAMAMOTO Takashi
97b439f180 examples/udp: Avoid using non-standard s6_addr16
Also, fixes endian issues.
2020-04-02 11:39:59 +01:00
YAMAMOTO Takashi
d5ec9f91ae examples/udp: Avoid common symbols 2020-04-02 11:39:59 +01:00
YAMAMOTO Takashi
d55401d3fc examples/udp: Avoid conflicts with host OS definitions 2020-04-02 11:39:59 +01:00
YAMAMOTO Takashi
d79de16657 examples/udp: Appease nxstyle errors 2020-04-02 11:39:59 +01:00
Ouss4
5e245cf34b examples/tcpblaster: When a host PC is used, take its implementation of hton/ntoh functions. 2020-03-31 14:35:57 +08:00
YAMAMOTO Takashi
326c80db72 tcpblaster: Appease nxstyle complaints 2020-03-30 02:12:02 -05:00
YAMAMOTO Takashi
7e6e19d80c tcpblaster: Fix build on macOS
s6_addr is in standard. s6_addr16 is not.
See RFC 2553.
2020-03-30 02:12:02 -05:00
YAMAMOTO Takashi
5f91364d44 tcpblaster: Avoid conflicting with host OS definitions 2020-03-30 02:12:02 -05:00
YAMAMOTO Takashi
e8b0c903bc examples/udpblaster: Fix some nxstyle errors 2020-03-28 11:56:44 -05:00
YAMAMOTO Takashi
60378318d3 udpblaster: Fix build on macOS
s6_addr is in standard. s6_addr16 is not.
See RFC 2553.
2020-03-28 11:56:44 -05:00
YAMAMOTO Takashi
4ac7744c2e Appease nxstyle complaints 2020-03-28 10:21:48 -05:00
YAMAMOTO Takashi
cf30257f1c examples/udpblaster: Avoid conflicts with host OS definitions 2020-03-28 10:21:48 -05:00
YAMAMOTO Takashi
c9c1d2bbc6 Change the default of stack size configs to DEFAULT_TASK_STACKSIZE
Where:
 * Under examples and testing
 * And the default value is less than 2048

Using a bit more memory for examples and tests should not
be a critical problem.
2020-03-27 02:43:11 -05:00
YAMAMOTO Takashi
35933d8131 examples: Replace hardcoded stack sizes to DEFAULT_TASK_STACKSIZE
Where the hardcoded values are less than 2048.
Using a bit more memory for examples should not be a critical problem.
2020-03-27 02:43:11 -05:00
YAMAMOTO Takashi
e7156be066 Change the defaults of stack size configs to DEFAULT_TASK_STACKSIZE
This commit changes only ones with the default 2048 and
leaves the others.
E.g. this leaves SYSTEM_RAMTEST_STACKSIZE, whose default is 1024.
I guess those need to be inspected one-by-one.
2020-03-27 02:43:11 -05:00
YAMAMOTO Takashi
c304624fab Replace "STACKSIZE = 2048" with CONFIG_DEFAULT_TASK_SIZE
For now, I left the following instances because it isn't
clear to me why they are using the different values.
Maybe they need one-by-one inspection.

    examples/igmp/Makefile:STACKSIZE = 1024
    examples/powerled/Makefile:STACKSIZE = 1024
    examples/powermonitor/Makefile:STACKSIZE = 768
    examples/relays/Makefile:STACKSIZE = 512
    examples/smps/Makefile:STACKSIZE = 1024
    graphics/screenshot/Makefile:STACKSIZE = 4096
    system/flash_eraseall/Makefile:STACKSIZE = 1024
    testing/cxxtest/Makefile:STACKSIZE = 4096
    testing/smart_test/Makefile:STACKSIZE = 4096
2020-03-27 02:43:11 -05:00
YAMAMOTO Takashi
2f7480d11b Use MODULECC/MODULELD when building modules 2020-03-27 01:01:30 -05:00
YAMAMOTO Takashi
9dca031f26 module: Appease nxstyle complaints 2020-03-26 18:46:13 +01:00
YAMAMOTO Takashi
e30177de4e sotest: Appease nxstyle complaints 2020-03-26 18:46:13 +01:00
YAMAMOTO Takashi
cc966d5414 module: Fix a printf format mismatch ("%s" vs int) 2020-03-26 18:46:13 +01:00
YAMAMOTO Takashi
4a4835030d sotest: Fix a printf format mismatch ("%s" vs int) 2020-03-26 18:46:13 +01:00
Xiang Xiao
f16a765cca
examples: Fix the parallel build break (#138)
1.Remove build target to avoid build and install run parallelly
2.Invoke the sub Makefile just before the parent source code compile
2020-03-23 11:40:44 -06:00
Xiang Xiao
1511403fdf Revert "Don't generate .depend anymore"
This reverts commit cc5ad09caa.
2020-03-22 23:09:40 -05:00
Xiang Xiao
f074d7f376 Makefile: let install depend on the target binary
to ensure the binary get built and install once
2020-03-22 22:42:13 +00:00
Xiang Xiao
258e014025 Revert "Ensure "build" before "install""
This reverts commit 404b330c25.
2020-03-22 22:47:16 +01:00
Xiang Xiao
8a7ea1695d Revert "examples/elf/tests: Ensure "build" before "install""
This reverts commit 2abf0f50e1.
2020-03-22 22:47:16 +01:00
Xiang Xiao
9394424b1e Revert "examples/sotest/lib: Fix dependency"
This reverts commit 0cb3712c19.
2020-03-22 22:47:16 +01:00
Xiang Xiao
cc5ad09caa
Don't generate .depend anymore 2020-03-22 18:15:21 +00:00
Xiang Xiao
6e3a9a2eda Call TESTANDREPLACEFILE instead of mv
To avoid the timestamp change even the content is same
2020-03-22 09:03:08 -06:00
Xiang Xiao
7caef179a2 Fix the typo error 2020-03-22 09:02:57 -06:00
Xiang Xiao
d614ee8efa
Strip the debug information if CONFIG_DEBUG_SYMBOLS isn't enable. 2020-03-22 14:46:58 +00:00
Gregory Nutt
da31673ddf Run nxstyle against all modified .c and .h files 2020-03-22 08:23:28 -05:00
Gregory Nutt
1a9444a68b Remove support for CONFIG_FS_WRITABLE and CONFIG_FS_READABLE 2020-03-22 08:23:28 -05:00
liuhaitao
54b375dc43 examples: Fix elf/module/posix_spawn sometimes parallel build errors at link time
It seems in the time window mksymtab.sh redirect to symtab.c, there is chance symtab.c
would also be built meantime. Then if built before symtab.c write done, link errors may
occur. So use rename and mv operation to reduce the possibility.

Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
2020-03-21 20:46:58 +09:00
liuhaitao
b27d694de4 example/module: update SYMTAB_SRC dependency to fix FSROOT not populated
In parallel build, for example maix-bit:module config, it reports:
nm: 'a.out': No such file
This is caused by FSROOT not populated with chardev when symtab.c
generated. So update SYMTAB_SRC dependency to fix it.

Change-Id: I5bb5d17db41f3bba98ae70a2acdd2ec594736611
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
2020-03-20 19:13:54 +09:00
liuhaitao
47c0df6ae6 Revert "examples: elf: Fix parallel build errors at link time"
This reverts commit 176fd27c8a.
2020-03-20 08:30:15 +09:00
liuhaitao
d7886374bc Revert "examples/posix_spawn: Fix parallel build errors at link time"
This reverts commit 73319a6968.
2020-03-20 08:30:15 +09:00
Masayuki Ishikawa
0e13730afd
Merge pull request #120 from liuguo09/posix_spawn_nightly_build_fix
examples/posix_spawn: Fix parallel build errors at link time
2020-03-19 08:20:44 +09:00
Gregory Nutt
80428f56e2 examples/slcd/slcd_main.c: Fix nxstyle issues. 2020-03-18 11:11:31 -06:00
Pierre-Olivier Vauboin
f17d89d085 examples/slcd: fix priv->fd that was used by slcd_flush before being set 2020-03-18 11:11:20 -06:00
liuhaitao
73319a6968 examples/posix_spawn: Fix parallel build errors at link time
During generating symtab.c, compile seqeuence would start with
incomplete symtab.c. This change will fix such a situation.

Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
2020-03-13 11:33:42 +08:00
Masayuki Ishikawa
176fd27c8a examples: elf: Fix parallel build errors at link time
During generating symtab.c, compile seqeuence would start with
incomplete symtab.c. This change will fix such a situation.

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-03-11 20:53:37 -05:00
Masayuki Ishikawa
b1fd3ec8d8 examples: elf: Fix parallel build errors
NOTE: Apply the same logic as in examples/posix_spawn/Makefile

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-03-11 20:53:37 -05:00
YAMAMOTO Takashi
0cb3712c19 examples/sotest/lib: Fix dependency 2020-03-10 05:19:20 -05:00
Xiang Xiao
3398aad7eb examples/tcpblaster: Fix the nightly build warning
tcpblaster_server.c: In function 'tcpblaster_server':
tcpblaster_server.c:256:71: warning: passing argument 1 of 'localtime' from incompatible pointer type [-Wincompatible-pointer-types]
           strftime(timebuff, 100, "%Y-%m-%d %H:%M:%S.000", localtime (&curr));
                                                                       ^
In file included from tcpblaster_server.c:50:0:
/usr/include/time.h:123:19: note: expected 'const time_t * {aka const long int *}' but argument is of type 'struct timespec *'
 extern struct tm *localtime (const time_t *__timer) __THROW;
                   ^~~~~~~~~
tcpblaster_client.c: In function 'tcpblaster_client':
tcpblaster_client.c:230:71: warning: passing argument 1 of 'localtime' from incompatible pointer type [-Wincompatible-pointer-types]
           strftime(timebuff, 100, "%Y-%m-%d %H:%M:%S.000", localtime (&curr));
                                                                       ^
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-03-09 09:17:07 +01:00
liuhaitao
404b330c25 Ensure "build" before "install"
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
2020-02-27 07:47:32 -03:00
liuhaitao
4c4d8b1c1c examples/elf: update elf_main.c dependency to fix parallel build break
Update elf_main.c depends on tests/symtab.c to make sure romfs.h exist
before compiling elf_main.c.

Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
2020-02-26 10:24:05 -06:00
Bhindhiya
ae36b6f8a9 examples/ipforward: IP Header issue for IPv4 fixed
Also run modified .c file through tools/nxstyle
2020-02-26 07:48:34 -06:00
YAMAMOTO Takashi
2abf0f50e1 examples/elf/tests: Ensure "build" before "install" 2020-02-26 00:05:02 -06:00
Xiang Xiao
16dc851889 Revert "examples: usrsocktest: Fix errors in NoBlockRecv and BlockRecv tests"
This reverts commit 10c715d921.
2020-02-25 18:02:46 -03:00
YAMAMOTO Takashi
45bcfa8b2e examples/elf: Add a few make rules
To fix "don't know how to create tests/dirlist.h" make complaints.
2020-02-25 07:43:23 -06:00
liuguo09
2f23d2a602
examples/elf/tests: Correct symtab.c dependency to fix parallel build break
Correct symtab dependency from build to populate instead, or tests
subdirectory programs would be built twice which resulted in errors
as below:
arm-none-eabi-ld: hello++3.o: file not recognized: file truncated
2020-02-25 13:26:51 +01:00
archer
6751aa26a6
examles/netlink: Fix a typo that resulted in build breakage. 2020-02-25 13:17:51 +01:00
Masayuki Ishikawa
5d37c68a73 examples: discover: Use htonl() instead of HTONL() in discover_main.c
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-02-25 05:02:58 -06:00
Adam Feuer
5a10c0e8e7 tcpblaster reporting and docs improvements
- changed incorrect Kb to correct KB in program output
- added readme

Squashed commit of the following:

commit b81821fd788eb08ffdf5a3084ab3d128788b75da
Author: Adam Feuer <adam@starcat.io>
Date:   Mon Feb 24 16:58:29 2020 -0800

    formatting improvements

commit a70e7109dd90522e6d7f680790d80c9328a8ba9c
Author: Adam Feuer <adam@starcat.io>
Date:   Mon Feb 24 16:58:13 2020 -0800

    formatting improvements

commit c11a5b3c8ee38fe080d121db87b7d26c0baf9f93
Author: Adam Feuer <adam@starcat.io>
Date:   Sun Feb 23 17:03:22 2020 -0800

    remove printf debugging statement

commit 94bcaa89d2df326ed2b560e935d344932c46607d
Merge: fddb3ee4 d6604922
Author: Adam Feuer <adam@starcat.io>
Date:   Sun Feb 23 16:58:35 2020 -0800

    Merge branch 'master' into feature/tcpblaster-improvements

commit fddb3ee4ee9ba185f0f4e01c205620bbcb02e40e
Author: Adam Feuer <adam@starcat.io>
Date:   Sat Feb 22 16:29:51 2020 -0800

    fixed typo

commit d398d6f3803d81e849814548be9671ac33f08168
Author: Adam Feuer <adam@starcat.io>
Date:   Sat Feb 22 16:29:04 2020 -0800

    logging now has timestamp; improved configuration
2020-02-24 20:09:35 -06:00
Xiang Xiao
41d88f06e7 Run codespell -w with the latest dictonary again 2020-02-23 07:10:14 -06:00
Xiang Xiao
d660492289 Run codespell -w against all files
and fix the wrong correction
2020-02-22 14:41:36 -06:00
Masayuki Ishikawa
10c715d921 examples: usrsocktest: Fix errors in NoBlockRecv and BlockRecv tests
NOTE: Because sin_zero field is just a padding, so should be ignored.

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-02-21 00:56:49 -06:00
chao.an
f28eca9dbc Make.defs: Use complete include path 2020-02-19 12:56:10 -06:00
Xiang Xiao
eb8678cfeb Remove CONFIG_DEV_LOWCONSOLE from source code
Follow the nuttx side change
2020-02-18 13:13:29 -06:00
Xiang Xiao
569618220a Change CONFIG_CXX_NEWLONG to CONFIG_ARCH_SIZET_LONG
Follow up nuttx side change
2020-02-18 07:37:54 -06:00
Gregory Nutt
218d8c9fe2 examples/elf/tests/mutex/mutex.c: Fix typo in a previous PR. 2020-02-15 19:08:03 +01:00
Gregory Nutt
1056cce2b5 apps/examples/elf: Correct mount point configuration error.
If an external file system is used but is not mounted by the the ELF example, then a compilation error will occur.  This configuration problem has existed for a long time but was unmasked by a recent PR.  In the failure mode, CONFIG_EXAMPLES_ELF_FSTYPE would not be defined because it depends on CONFIG_EXAMPLES_ELF_FSMOUNT which is not defined.  The resulting mountpoint, MOUNTPT, would therefore be left in an invalid state.  Previous changes to conditional logic now allowed setenv() to run and to attempt to set the PATH variable to MOUNTPT, causing a compile time failure like this:

    CC:  elf_main.c
    elf_main.c: In function 'elf_main':
    elf_main.c:113:32: error: expected ')' before 'CONFIG_EXAMPLES_ELF_FSTYPE'
     #  define MOUNTPT      "/mnt/" CONFIG_EXAMPLES_ELF_FSTYPE
                                ^~~~~~~~~~~~~~~~~~~~~~~~~~
    elf_main.c:364:18: note: in expansion of macro 'MOUNTPT'
       setenv("PATH", MOUNTPT, 1);
                       ^~~~~~~
    elf_main.c:364:3: error: too few arguments to function 'setenv'
       setenv("PATH", MOUNTPT, 1);
       ^~~~~~
    In file included from elf_main.c:47:
    D:\Spuda\Documents\projects\nuttx\master\nuttx-fork\include/stdlib.h:158:11: note: declared here
     int       setenv(FAR const char *name, FAR const char *value, int overwrite);
               ^~~~~~

This problem was found during manual build testing using configuration lx_cpu:nsh.
2020-02-15 18:06:43 +01:00
Gregory Nutt
1d8b738a2b apps/examples/elf: Resolve issue issue 63 2020-02-15 23:55:33 +08:00
YAMAMOTO Takashi
e5dd0b1eb9 mksymtab.sh: Avoid using find -executable
As it seems GNU-find only.  macOS doesn't have it.

-perm is in POSIX and should be more widely available.
2020-02-14 09:13:55 -06:00
YAMAMOTO Takashi
66e7590dd0 examples/elf: Don't bother to honor CONFIG_PATH_INITIAL
As we know where the binaries are, there's little point
to use CONFIG_PATH_INITIAL.
2020-02-14 18:38:07 +08:00
Gregory Nutt
44b8c9c5aa apps/examples/tcpblaster: Fix compile errors in loopback mode. 2020-02-10 21:05:49 +01:00
Masayuki Ishikawa
539d0854dd examples: elf: Fix warnings when compiled for RISC-V 64bit 2020-02-10 14:16:00 +08:00
Xiang Xiao
779197c63e Ensure all source code end with one and only one newline
by this command:
git ls-files -z | while IFS= read -rd '' f; do tail -c1 < "$f" | read -r _ || echo >> "$f"; done
2020-02-09 08:14:49 -06:00
Masayuki Ishikawa
bb3cd0a496 apps: elf: Fix stack corruption in task test
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-02-04 20:56:52 -08:00
YAMAMOTO Takashi
43a36996ca nettest: Avoid conflicts with host definitions 2020-02-04 09:36:50 -06:00
YAMAMOTO Takashi
bcc0f5c0a9 nettest: Avoid common symbols 2020-02-04 09:36:08 -06:00
Xiang Xiao
1d6fcfac13 Build system: Reference tools/define.sh through DEFINE macro 2020-02-03 15:09:33 -06:00
Gregory Nutt
724a34bd3b Run all files modified by pr45 through nxstyle. 2020-02-03 07:38:57 -06:00
Xiang Xiao
37135e5dfe telnetd should listen both IPv4 and IPv6 for the dual stack
Change-Id: Ic1c2878f2eda721ccdf667b0a634289c643f5220
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-02-03 07:17:22 -06:00
Xiang Xiao
1154735ca6 Refine the preprocess conditional guard style 2020-01-31 11:04:10 -06:00
Xiang Xiao
e0dcfa0c55 Remove extra whitespace from files (#43)
* Remove multiple newlines at the end of file
* Remove the white space from the end of line
2020-01-31 08:29:24 -06:00
patacongo
8c9663b6c1
apps/examples/userfs/userfs_main.c: Fix warning (#41)
Fixes warning:

    CC:  userfs_main.c
    userfs_main.c:182:3: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types]
       ufstest_truncate,
       ^
    userfs_main.c:182:3: note: (near initialization for ‘g_ufstest_ops.truncate’)

Co-authored-by: Gregory Nutt <gnutt@nuttx.org>
2020-01-30 18:58:03 +01:00
patacongo
ba6377078b
apps/testing/mm: Move from apps/examples/mm (#39) 2020-01-30 17:07:00 +01:00
Gregory Nutt
4e509c8659 Revert "examples: hello: Show CPU index when running in SMP mode"
Cannot call up_cpu_index() or any other nonstandard OS application interface.  This not only breaks the portable POSIX OS interface but also would break any PROTECTED or KERNEL mode SMP implementation.

If you want to do something like this in user space, the appropriate thing to do would be to extend prctl().  That is non-posix, but is at least Linux-like and will work in all build modes.

This reverts commit 715517b1a0.
2020-01-30 05:41:13 -06:00
Masayuki Ishikawa
715517b1a0 examples: hello: Show CPU index when running in SMP mode
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2020-01-30 09:23:12 +01:00
Ouss4
eb1af03259 examples/sendmail: Few fixes to make the example run on a local SMTP
server.
2020-01-25 16:39:21 -06:00
Gregory Nutt
72a934c6c2 Add configuration settings for apps/examples/sendmail.
The sendmail example hasn't been used in years.  I am not sure it was ever debugged.  It is so old that it still expects hand editted .config files.  As a result, all of the configuration settings were missing from the Kconfig file.

This commit adds the missing apps/examples/sendmail configuration settings so that the example at least builds.  I cannot test it because I have no smtp server that I am willing to spam.

This configuration also adds missing configuration dependencies and runs the C files in apps/examples/sendmail and apps/netutils/smtp through nxstyle.

This commit resolves an issue reported by surya prakash rased in the Google group:  https://groups.google.com/forum/#!topic/nuttx/idr-M164Y24
2020-01-24 19:07:54 -03:00
liuguo09
270b97190b Makefile: Fix more warning: jobserver unavailable: using -j1. Add '+' to parent make rule. (#27)
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
2020-01-21 17:44:45 +01:00
liuguo09
50a86f9bc7 examples/posix_spawn: update dependency to fix parallel build break (#26)
In stm32f4discovery:posix_spawn and lc823450-xgevk:posix_spawn parallel build,
it failed since apps/examples/posix_spawn/filesystem/romfs/hello is not available
which is needed by examples/posix_spawn/filesystem/symtab.c.

Change-Id: I588317396f8e3ca4d69d4ec8db8ccad219207048
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
2020-01-21 15:45:32 +01:00
liuhaitao
97fd133025 Add install dependency on chardev BIN to fix parallel build break
chardev bin may not availabe before make install in parallel build,
so add install dependency on chardev BIN here.

Change-Id: If28451ceeeed0a6463544d8c342871cecda5a057
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
2020-01-20 08:16:34 -06:00
liuhaitao
02dbab7679 Makefile: Fix warning: jobserver unavailable: using -j1. Add '+' to parent make rule.
Change-Id: I73d156f55bc82778c64defe5a8dd84bb478c9008
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
2020-01-19 07:24:21 -06:00
Ouss4
de836fed72 examples/lis3dsh_reader/lis3dsh_reader_main.c: Make an infinite loop
look similair to the rest.
2020-01-16 13:39:56 -06:00
raiden00pl
77985058f3 examples/: Add simple HTS221, LSM303 and LSM6DSL examples #19 2020-01-16 20:24:32 +00:00
Xiang Xiao
db61c92100 Fix dhcpd #17
apps/netutils/dhcpd/dhcpd.c:  Fix unused const variable

dhcpd.c:273:29: warning: 'g_anyipaddr' defined but not used [-Wunused-const-variable=]
 static const uint8_t        g_anyipaddr[4] = {0, 0, 0, 0};

apps/netutils/dhcpd:  Make dhcpd interface configurable

apps/netutils/dhcpd:  Lease address directly if hit in address range

apps/netutils/netinit: Initialize dhcpc_state

update the addresses only on request success
2020-01-16 12:06:25 -06:00
Mateusz Szafoni
782a3d25a0 examples/sx127x_demo/sx127x_demo.c: RX/TX only if RX/TX enabled (#18) 2020-01-16 19:02:25 +01:00
Gregory Nutt
b2cd439b10 Remove unselectable CONFIG_NET_TCP_READHEAD dependencies.
NuttX commit 346336bb9e5c9199b82e34d08bf23dd1bc389460 make CONFIG_NET_TCP_READADHEAD unselectable and removed all references to CONFIG_NET_TCP_READHEAD from the the NuttX repositories.  However, there was no corresponding removal of CONFIG_NET_TCP_READHEAD from the apps/ repository.  As a result, there was logic that depended on the selection of CONFIG_NET_TCP_READHEAD that could never be enabled.

This was found during build testing using the configuration olimex-lpc1766stk/thttpd-binfs.  THTTPD was not being build fully because it had dependencies on CONFIG_NET_TCP_READHEAD.  There resulted int numerous new warnings and, finally, the error:

(.../apps.examples.thttpd.o): in function `thttp_main':
thttpd_main.c:(.text+0x104): undefined reference to `thttpd_main'
2020-01-15 11:16:17 -03:00
Alan Carvalho de Assis
921131895e Include the file name to open and the fail error number
Also fix issues reported by nxstyle
2020-01-12 09:49:12 -06:00
Xiang Xiao
857158451b Unify the void cast usage
1.Remove void cast for function because many place ignore the returned value witout cast
2.Replace void cast for variable with UNUSED macro

Change-Id: Ie644129a563244a6397036789c4c3ea83c4e9b09
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2020-01-02 23:21:01 +08:00
Gregory Nutt
3da8091d30 Include nuttx/symtab.h instead of nuttx/binfmt/symtab.h since symtab.h under binfmt folder is for internal use. 2019-12-10 08:39:22 -06:00
Gregory Nutt
e305592ce6 apps/examples/tcpblaster: Fix several problems with the host is the client and the target in the server. Basic problem was that the host did not know the IP address of the target server due to several bugs and build issues that only seemed to affect this configuration. 2019-12-08 17:11:07 -06:00
Xiang Xiao
0343ea1a1b examples/udpblaster/Makefile: change UDPBLASTER_PROGNAME to CONFIG_UDPBLASTER_PROGNAME to fix the compile error:
apps\include" -Dmain  udpblaster_target.c -o  udpblaster_target.o
<command-line>:0:6: error: expected identifier or '(' before numeric constant
udpblaster_target.c:196:5: note: in expansion of macro 'main'

int main(int argc, FAR char *argv[])
2019-12-02 08:19:07 -06:00
Gregory Nutt
9f1aa3c3dc apps//examples/netlink_route: Correct format when printing ARP table entries. 2019-11-28 16:28:41 -06:00
Gregory Nutt
3ebf71095e Remove all support for the ancient Pascal compiler and pcode interpreter. 2019-11-21 07:04:34 -06:00
Gregory Nutt
5c7c34f559 examples/netlink_route/netlink_route_main.c: Use options to disable individual NETLINK_ROUTE commands. 2019-11-12 10:20:26 -06:00
Gregory Nutt
449290c8da apps/examples/netlink_route: Add test/example of NETLINK_ROUTE 'get' opeations. apps/netutils/netlib: Fixes to NETLINK_ROUTE helpers found by testing with apps/examples/netlink_route. 2019-11-11 13:40:57 -06:00
Juha Niskanen
eaeb6cc105 nshlib/Kconfig: Add missing NSH_DISABLE_DMESG, typos. 2019-11-08 07:52:22 -06:00
Alin Jerpelea
25c59ccbfe apps/examples/charger: Simple charger example that will display on the console voltage and current values. 2019-11-04 07:29:02 -06:00
Alin Jerpelea
9675e55327 apps/examples/bmi160: Add bmi160 example app. This app will read the BM160 data and list it on the NSH console. 2019-11-04 07:28:14 -06:00
Gregory Nutt
0dde32fb43 nshlib/nsh_romfsetc.c and graphics/traveler/trv_romfs.c: Replace direct calls to romdisk_register() with indirect calls via boardioctl(BOARDIOC_ROMDISK). This not only fixes the violation of the portable POSIX OS interface, but also permits use of ROM disks in PROTECTED and KERNEL modes. There are still multiple illegal calls to romdisk_register() from code under apps/examples. These all must also be converted to use boardioctl(BOARDIOC_ROMDISK) someday. 2019-10-26 13:47:03 -06:00
Gregory Nutt
e0dff13094 apps/nshlib/Kconfig and examples/mount/Kconfig: Automatically select CONFIG_DRVR_MKRD is it is needed by the configuration. 2019-10-26 11:45:00 -06:00
Gregory Nutt
0bc798c7a9 apps/examples/mount: Replace illegal call to ramdisk_register() with a call to boardctl(BOARDIOC_MKRD). 2019-10-26 10:22:34 -06:00
Gregory Nutt
3e4db5cb40 examples/nxlines/Kconfig: Correct nxlines example program name. 2019-10-19 14:39:19 -06:00
Gregory Nutt
8cb4896bdb apps/examples/flowc, tcpblaster, and udpblaster: Back out more changes that broke the makefiles fixed by commit 2830892424. This applies the same fix to other Makefiles that follow that same pattern and seem to have the same breakage. 2019-10-18 16:47:57 -06:00
Gregory Nutt
2830892424 apps/examples/udp and nettest: Back out parts of commit e806097c70 that broke the build of these examples. 2019-10-18 16:24:43 -06:00
Gregory Nutt
46612fe1a9 Trivial updates from review of PR. 2019-10-18 08:59:06 -06:00
Alin Jerpelea
67ac8e63c6 Merged in alinjerpelea/apps (pull request #203)
examples: RTTL player exaple

A simple RTTL player demo that is able to play tunes according to
an RTTL song

Refferences
https://en.wikipedia.org/wiki/Ring_Tone_Transfer_Language
https://cs.nyu.edu/courses/fall03/V22.0201-003/notes.htm

Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-10-18 14:55:23 +00:00
Gregory Nutt
eb0b5b194f apps/examples/nxterm/Makefile: PROGNAME, PRIORITY, STACKSIZE varialble names did not match declarations in Kconfig file. 2019-10-17 17:51:49 -06:00
Xiang Xiao
403b4a0178 In all Make.defs files, append CONFIGURED_APPS with the consistent ifeq/ifneq. 2019-10-17 11:42:49 -06:00
Xiang Xiao
7808eb62d2 apps/: In all Make.def files, append to CONFIGURED_APPS patch with the absolute path. 2019-10-17 11:33:59 -06:00
Gregory Nutt
3a23523147 Makefiles: This reverts part of commit cf0365ea9. It restores 'conditional' inclusion of TOPDIR/Make.defs. Otherwise all make targets fail if the board has not been configured. That is okay most of the time, but not for things like clean and distclean which should not depend on being configured. 2019-10-15 09:25:48 +08:00
Anjana ‎
da100102a7 examples/serialblaster, serialrx, udpblaster: Update to serial/UDP tests. 2019-10-11 21:23:39 +08:00
Xiang Xiao
92e7b1f400 apps/: In Makefiles remove 'INCDIROPT = -w' which is already defined in apps/Make.defs. 2019-10-07 02:53:47 -06:00
Xiang Xiao
31a7b99f9c apps.: Remove the inappropriate NSH_BUILTIN_APPS coupling
1. Check NSH_NETINIT for self network initialization
2. Check NSH_ARCHINIT for sel arch specific initialization
3. Always show help regardless of NSH_BUILTIN_APPS
4. Loop forever regardless of NSH_BUILTIN_APPS, user could:
  a.change the default behavior by the command line argument
  b.or ctrl+c to break out the loop
2019-10-07 02:37:56 -06:00
Xiang Xiao
e806097c70 Application.mk and main.c files: Change builtin's entry point from main to xxx_main by macro expansion. This change make the entry point fully compliant with POSIX/ANSI standard. 2019-10-06 06:14:56 -06:00
Xiang Xiao
e829f047bc apps/; Change space to tab and help to ---help--- in Kconfig files. 2019-10-05 21:37:19 -06:00
Xiang Xiao
cf0365ea92 Clean up Makefile under apps folder no functional changes. 2019-10-04 08:35:46 -06:00
Xiang Xiao
63c3772888 CONFIG_BUILD_LOADABLE: Check the kernel function callable by BUILD_KERNEL instead of BUILD_LOADABLE since BUILD_LOADABLE could be turned on even with BUILD_FLAT. 2019-10-03 14:10:32 -06:00
Xiang Xiao
9a27d4a697 Makefiles: Remove .PRECIOUS if Makefile doesn't touch libapps. 2019-10-01 11:48:55 -06:00
Gregory Nutt
13667a2f66 examples/romfs: Remove romfs_testdir.h. That file is regenerated whenever the example is built and so should not be in the repository. 2019-10-01 07:38:48 -06:00
Nathan Hartman
b2a3ba57ff Fix typos 2019-09-11 08:59:08 -06:00
ugusto Fraga Giachero
b3057b52ef examples/pwm/pwm_main.c: Update the pwm header path. 2019-09-02 08:01:14 -06:00
Nathan Hartman
3a75edca20 Fix minor typo/copy-paste: 'will be use when'->'will be used when' 2019-08-23 11:59:28 -06:00
Gregory Nutt
ac61c18fcc Move apps/builtins/builtin_forindex.c to nuttx/libs/libc/builtin since it is required by kernel logic as well. Other changes account for movement of builtin.h from nuttx/include/nuttx/binfmt/built.h to nuttx/include/lib/builtin.h. 2019-08-23 09:12:45 -06:00
Manuel Stühn
88d47e469f Merged in manuelstuehn/nuttx-apps/feature/bsd-portable (pull request #190)
change all occurences of /bin/(ba)sh to /usr/bin/env bash which appears more portable

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-08-10 17:16:33 +00:00
Gregory Nutt
e6ba3ccff8 Update comments, README's, etc. to reflect changes to nuttx/boards directory reorganization. 2019-08-09 08:40:22 -06:00
Gregory Nutt
dd36f7ca4d Fix paths in README.txt files which have changed due to the restructuring of nuttx/boards directory. 2019-08-05 10:22:56 -06:00
Gregory Nutt
2a8dccb75d Change name configs/ to boards/ in comments, Documentation, Tools, etc. 2019-08-05 07:33:16 -06:00
Gregory Nutt
eef399b369 apps//examples/uid/uid_main.c: Corrections/updates from futher testing. 2019-08-04 14:38:07 -06:00
Gregory Nutt
1fc73b2d45 apps/examples/uid: Demo used to verify PASSWD and GROUP interfaces. 2019-08-04 08:54:08 -06:00
Nathan Hartman
d6a3beadfb Remove 'executable' bit on several files 2019-08-01 14:19:02 -06:00
Gregory Nutt
b3c705d70c examples/dac/dac_main.c: Fix warning found in build testing. Also lots of coding standard violations. 2019-07-28 17:52:28 -06:00
Gregory Nutt
9e1cda95fb Cosmetic fixes to spacing. 2019-07-27 08:49:34 -06:00
Nathan Hartman
3a21b0b222 apps/examples/webserver/webserver_main.c: Init network & run forever only if not builtin app. Infer from CONFIG_NSH_BUILTIN_APPS if we are a NSH built-in app or not. If built-in app (CONFIG_NSH_BUILTIN_APPS defined) then we assume network is initialized prior to webserver starting and we exit on webserver failure. If running standalone (CONFIG_NSH_BUILTIN_APPS is undefined) then behavior is unchanged: webserver initializes network and runs forever. 2019-07-26 11:04:05 -06:00
Alan Carvalho de Assis
d868e2f726 apps/examples/chrono: Add chronometer apps example. 2019-07-17 12:48:39 +02:00
Masayuki Ishikawa
b12b61df69 Merged in masayuki2009/nuttx.apps/fix_webserver (pull request #179)
apps/examples/webserver: Fix to compile with CONFIG_NETUTILS_HTTPD_SENDFILE=y

Also, in this PR, some configs such as CONFIG_NETUTILS_HTTPDFILESTATS
can be selected by menuconfig.

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-07-03 12:20:29 +00:00
Gregory Nutt
18a8032c4d examples/vl53l1x: Remove. The driver does not compile. 2019-06-29 06:28:40 -06:00
Juan Flores
94ac7dceab examples/vl53l1x: Add VL53L1X example demo. 2019-06-28 15:07:13 -06:00
Alan Carvalho de Assis
656157399d industry/abnt_codi, include/industry/abnt_code.h, examples.abntcodi: Adds support for ABNT CODI library. This is an energy meter protocol used in Brazil. 2019-06-15 08:38:04 -06:00
Gregory Nutt
a38c85dbaa Fix a warning found in build testing. 2019-05-25 12:11:12 -06:00
Gregory Nutt
dd35a7cacc apps/: Removed all references to CONFIG_DISABLE_POLL. The standard POSIX poll() can not longer be disabled. 2019-05-21 19:08:12 -06:00
Gregory Nutt
73ab5e2750 Remove some cases in Kconfig files of 'comment' with 'depends on'. That is probably a good practice. I removed these because (1) is not done elsewhere so it is just an inconsistency, and (2) the HTML generation tool at nuttx/tools/kconfig2html.c would need to be extended to parse that case. I don't have time to do that now. 2019-05-19 09:49:50 -06:00
Gregory Nutt
e76bfbb74e Squashed commit of the following:
apps/graphics/twm4nx:  Other toolbar buttons need to be disabled while resizing.  Lots of problems if you decide to iconify or exit while resizing.  CResize now disables all buttons except for the RESIZE button while resizing.

    apps/graphics/twm4nx:  Add an event and logic to support notification of changes in the size of a window to NxTerm.

    Various updates to adapt to change in boardctl() interface.

    apps/graphics/twm4nx:  Correct an error in the NxTerm resize logic

    apps/graphics/twm4nx:  Update debug output when failures to send a message occur.  The returned value of -1 is not interested, need to show the errno value instead.

    apps/graphics/twm4nx:  Correct the maximum size of a message.  Recent changes caused message send failures because a message exceed that previous maximum size.

    apps/graphics/twm4nx:  Fix routing of redraw events.
2019-05-16 13:51:57 -06:00
Gregory Nutt
8f5944c4a8 Squashed commit of the following:
include/ and netutils/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    nshlib/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    system/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    testing/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
    examples/:  Remove references to CONFIG_DISABLE_SIGNALS.  Signals can no longer be disabled.
2019-04-29 14:53:38 -06:00
raiden00pl
75aca388a4 Merged in raiden00/apps/cjson (pull request #175)
netutils: support for the current version of cJSON

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-04-28 12:34:20 +00:00
raiden00pl
0a6726bc3e Merged in raiden00/apps (pull request #174)
Small fixes

examples/pca9635/pca9635_main.c: fix compilation

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-04-28 11:33:21 +00:00
Gregory Nutt
ad7f76f3a8 apps/examples/pwfb: Fix more cursor-related problems. Currently cursor is presented but the system dies due to memory corruption. 2019-04-10 15:00:36 -06:00
Gregory Nutt
fa05ad35e1 app/examples/pwfb: Add options to reduce the number of windows. This is helpful during debug to reduce the complexity. 2019-04-10 12:33:31 -06:00
Gregory Nutt
99382df286 apps/examples/pwfb: Extend example to verify software cursors. Untested on initial commit. 2019-04-10 09:24:08 -06:00
Matthew Koch
f09bc1a01b Squashed commit of the following:
Add note to file header of MIT-licensed code
    Compat for older kconfig
    Fixup OOB build experience
    Apply coding standards to imported code
    Upgrade littlevgl to 5.3 - demo
    Upgrade littlevgl to 5.3
2019-04-08 06:57:42 -06:00
Gregory Nutt
61eb262142 Various graphics apps: If CONFIG_VNCSERVER=y, don't vnc_default_fbinitialize() directly. That is a violation of the portable POSIX interface. Instead, call boardctl(BOARDIOC_VNC_START);. 2019-04-02 07:06:06 -06:00
Gregory Nutt
11b6bc9447 exmamples/, graphics/NxWidgets: Update NX window clients so that they use the new 'event' callback (vs. the obsoluted 'blocked' callback). 2019-03-25 13:01:52 -06:00
Matthew Koch
fab0ac6e82 Merged in mjkoch/apps/fb (pull request #172)
Add some awareness of overlays to apps/examples/fb

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-03-25 17:09:25 +00:00
Gregory Nutt
25528de5c7 examples/nxhello/nxhello_main.c: Fix trivial typo in printf statement. 2019-03-22 14:47:22 -06:00
Gregory Nutt
e26d78f40a This commit adds apps/examples/pwlines, another test of the pw-window framebuffer lgoic.
Squashed commit of the following:

    apps/examples/pwlines:  The example is complete and verified.

    apps/examples/pwlines:  A little more progress between distractions.

    apps/examples/pwlines:  Beginning of another per-window framebuffer test/examples.
2019-03-20 12:36:46 -06:00
Gregory Nutt
1a6c6e2eb4 Minor typo in README 2019-03-19 12:17:30 -06:00
Gregory Nutt
431333ad16 apps/examples/nxlines/nxlines_bkgd.c: Fix a bad, copy-paste comment. 2019-03-19 08:17:14 -06:00
Gregory Nutt
1bdb63b742 apps/examples/pwfb: Add a toolbar to the example windows. 2019-03-18 12:14:49 -06:00
Gregory Nutt
6513d9107c Update a README file. 2019-03-18 08:15:58 -06:00
Gregory Nutt
16b55d05be apps/examples/pwfb/pwfb_main.c: Fix typo in printf text 2019-03-17 14:39:04 -06:00
Gregory Nutt
13555f30f9 Squashed commit of the following:
apps/examples/pwfb: Solve a race condition by changin some relative priorities.  Also removes a delay kludge that used as a workaround.

    apps/examples/pwfb:  Add rate control.  Examples becomes unstable at high update rates.
2019-03-17 13:51:03 -06:00
Gregory Nutt
11d7ac7abe apps/examples/pwfb/pwfb_motion.c: Trivil spacing fix. 2019-03-17 11:38:59 -06:00
Gregory Nutt
c534f38358 apps/examples/pwfb/pwfb_events.c: Trivial typo in printf() 2019-03-16 17:36:25 -06:00
Gregory Nutt
51befb3fa7 apps/examples/pwfb/pwfb_main.c: Temporarily work around a race condition by adding a delay. 2019-03-16 15:54:08 -06:00
Gregory Nutt
9cd5d5c9ac apps/examples/pwfb: Change b32_t's to b16_t's; don't need so much precision. Some improvements to motion. Add VERBOSE debug output. Still lots of bugs. 2019-03-16 14:14:20 -06:00
Gregory Nutt
98b4394c9d This commit adds a test example at apps/examples/pwfb that will be used for testing the per-window framebuffer feature. The test does not work correctly yet.
Squashed commit of the following:

    apps/examples/pwfb:  Fixes compile and early debug issues.

    apps/examples/pwfb:  Code complete!

    apps/examples/pwfb:  Flesh out the motion logic.

    apps/examples/pwfb:  Add an example/test case that will, eventually be used verify the per-window framebuffer logic.  This is not even code complete at this point.
2019-03-16 12:27:45 -06:00
Gregory Nutt
d33ce2c3ae graphics: nx_openwindow() and nxtk_openwindow() now accept an addtional 'flag' parameter. This argument is not used at present but will, eventually enable a RAM backed, per-window framebuffer. 2019-03-13 12:33:13 -06:00
Gregory Nutt
e063e93f77 apps/examples/nxterm: NxWM passed the size of the NxTK sub-window but nxterm example passed the size of the complete NxTK window. They must be made consistent. 2019-03-09 13:17:22 -06:00
Gregory Nutt
e4e00f716f apps/examples/sx127x_demo/Kconfig: Fix misplaced 'if' 2019-03-07 18:08:31 -06:00
Alan Carvalho de Assis
c019c9d7af apps/examples/modbusmaster/mbmaster_main.c: eMBMasterRegHoldingCB cannot be static. 2019-03-07 16:11:45 -06:00
Gregory Nutt
53e6f4bf13 apps/examples/nxterm, graphics/NxWidgets: Replace illegal direct calls to nxterm_redraw() and nxterm_kbdin() with new boardctl() calls. 2019-03-06 15:23:02 -06:00
Gregory Nutt
6529a8444a apps/examples/nxterm: Most configuration options were not available in the Kconfig file. 2019-03-06 12:52:22 -06:00
Gregory Nutt
061b4338c9 apps/examples/nxterm and graphics/NxWidgets/nxwm: Replace direct calls to nxtk_register with legal, indirect calls via boardctrl(BOARDIOC_NXTERM). Replace calls to (deleted) nxterm_unregister(). The correc way to delete a driver is by unlink'ing it. 2019-03-06 10:53:13 -06:00
raiden00pl
81c7bdd2a1 Merged in raiden00/apps/lora (pull request #170)
examples: add sx127x demo

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2019-02-25 17:00:11 +00:00
Gregory Nutt
9c05f6540b Some updates due to NuttX renaming: CONFIG_BOARD_INITIALIZE is not CONFIG_BOARD_LATE_INITIALIZE; board_initialize() is now board_late_initialize(). 2019-02-18 13:16:23 -06:00
Michał Łyszczek
5a1fdaae54 apps/examples/ini_dumper: New example program. ini_dumper is example program that dumps content of ini file in pretty ascii table. It is using inih ini library in fsutils/inih. 2019-02-18 07:44:32 -06:00
Michał Łyszczek
c8106558d1 app/sexamples/embedlog: This example program presents most usefull features of embedlog library and how to use them. 2019-02-15 07:24:29 -06:00
Gregory Nutt
b2f46360de apps/: Remove/replace all conditional logic based on CONFIG_NSOCKET_DESCRIPTORS == 0. That value is always greater than zero now. In places just replace with #ifdef CONFIG_NET. 2019-02-11 16:23:55 -06:00
Gregory Nutt
9db029e318 The file system can no longer be disabled. Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS==0 2019-02-11 13:10:10 -06:00
Gregory Nutt
43e79ac329 Update for corrected name of standard header file. Should be dlfcn.h, not dllfcn.h. I am surprised no one ever noticed before now. 2019-02-09 14:10:16 -06:00
Alan Carvalho de Assis
87f42accc6 apps/eamples/modbusmaster: Add Simple Modbus master example. This example only supports Read/Write HoldingRegisters, but it is easy to extend it to support Read/Write Input/Coils/etc. Originally creatd bey Vytautas in 2016 and updated with minor fixes for this commit. 2019-02-02 08:17:36 -06:00
Xiang Xiao
ff54c47e64 Follow up the kernel signal-related change in:
examples/oneshot/oneshot_main.c:
  examples/alarm/alarm_main.c:
  examples/ajoystick/ajoy_main.c
  examples/djoystick/djoy_main.c
  examples/buttons/buttons_main.c
  examples/zerocross/zerocross_main.c
  graphics/traveler/src/trv_input.c
  graphics/ft80x/
2019-01-27 09:48:29 -06:00
Gregory Nutt
def2c19c68 testing/cxxtest: Move examples/cxxtest to testing. 2019-01-24 15:05:16 -06:00
Gregory Nutt
60dc0a8f2b testing/: Move all file system tests from examples/ to testing/ (fstest, nxffs, smart, smart_test). 2019-01-24 14:44:54 -06:00
Gregory Nutt
b71f6d07ac apps/testing/smp: Move apps/examples/smp to apps/testing/smp 2019-01-23 14:21:13 -06:00
Ken Pettit
c776901ac2 apps/examples/pdcurses: Minor fixes to examples/pdcurses apps to support multi-threading, cleanup RAM, etc. 2019-01-05 13:28:06 -06:00
Alan Carvalho de Assis
25c0387c44 apps/examples/battery: Add Battery Charger Monitor Example 2019-01-04 12:15:05 -06:00
Gregory Nutt
0c615ed586 Fix a few typos. 2018-12-27 08:48:52 -06:00
Masayuki Ishikawa
9b548e8ea2 Merged in masayuki2009/nuttx.apps/add_dep_to_smp (pull request #162)
apps/examples/smp: Add dependency on SMP in Kconfig

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: GregoryN <gnutt@nuttx.org>
2018-12-25 14:15:16 +00:00
Gregory Nutt
1ea316b46c apps/testing: Move apps/examples/ostest to apps/testing/ostest. 2018-12-12 16:37:38 -06:00
Alan Carvalho de Assis
7ddbe8c235 Various initialization functions in configs/: Change /dev/slcd to /dev/slcd0 for consistency 2018-11-25 14:01:37 -06:00
Gregory Nutt
e88a529010 From patch attached to nuttx/ Bitbucket Issue #136 from Vlado Vidovic:
The patch provided in issue 135, which adds support for HTTP Chunked Encoding, covers all paths in the webserver app except CGI callbacks. As a result, if a page being served happens to use CGI, it could generate stream content that does not comply with HTTP Chunked Encoding.

The patch attached amends the webserver app's CGI callbacks to use the HTTP Chunked Encoding sender function instead of using send() directly.
2018-11-23 17:29:07 -06:00
Gregory Nutt
f5e399670f apps/examples/webserver/Kconfig: The webserver "app" allows for DHCP client to be enabled. However, the Kconfig infrastructure does not contain EXAMPLES_WEBSERVER_DHCPC config.
Based on patch from "Anonymous" attached to Bitbucket Issue #130
2018-11-08 18:48:28 -06:00
wangyanjiong
bd86d9c8b8 apps/examples/gpio: Align with gpio driver update 2018-11-08 07:50:42 -06:00
anchao
3432acf7c4 apps/: Rename BINFMT_EXEPATH to LIB_ENVPATH. 2018-11-08 07:31:52 -06:00
Gregory Nutt
aeabc12536 apps/examples/mld: Fix incorrect format of IPv6 Mulitcast address. This resolves the UPD sendto() problem of commit 09691dd48f that was being blamed on the UDP stack. Nope.. cockpit error. 2018-11-07 18:19:09 -06:00
Xiang Xiao
cddfda99f0 apps/netutils/pppd: Refine and fix pppd code.
Reviewers note:  Reviewing the changes I also see that these file did not follow the NuttX codings standard.  I ran all files through nuttx/tools/indent.sh, manually reviewed all files for coding style issues.  I also changed occurrences of non-standard types u8_t, u16_t, and u32_t to the standard uint8_t, uint16_t, and uint32_t.
2018-11-07 12:43:42 -06:00
Xiang Xiao
c1f0653c85 apps/netutils/chat and apps/examples/chat: 'constify' chat variables and parameters 2018-11-07 11:55:09 -06:00
Gregory Nutt
09691dd48f apps/examples/mld: Add logic to set up the routing table before attempting to send the multicast packet. Still some problem, probably in NuttX stack: Still reports that the the multicast address is unreachable. 2018-11-07 10:43:03 -06:00
Gregory Nutt
dc02239347 apps/examples/mld/mld_main.c: Improve test by periodically dumping the content of /proc/net/mld (if available). 2018-11-06 10:41:01 -06:00
Daniel P. Carvalho
bc4735ce2a apps/examples/ina226: Added INA226 example 2018-11-05 16:45:00 -06:00
Gregory Nutt
74ac55308c examples/mld/mld_main.c: ifdef out some bogus logic in the test. 2018-11-05 09:39:55 -06:00
Gregory Nutt
44e2505038 apps/examples/mld: Add a test of MLD. Not much of a test, but it does provide a mechansim for some low-level bring-up operations. 2018-11-04 18:21:32 -06:00
Alan Carvalho de Assis
47e647c56a examples/mlx90614/mlx90614_main.c: Include support to change device address on mlx90614 2018-11-02 07:07:36 -06:00
Gregory Nutt
a26a7f9767 apps/netutils/netlib and apps/examples/igmp: Adapt to use the corrected, semi-standard version of struct ip_msfilter. 2018-10-29 06:51:56 -06:00
Alan Carvalho de Assis
3a4faf944a apps/examples/mlx90614: Add mlx90614 test example 2018-10-28 16:04:15 -06:00
Gregory Nutt
a579bab48a apps/system/progmem: Remove this utility. It makes illegal direct calls into the OS. 2018-10-19 11:44:41 -06:00
Gregory Nutt
f7895ef681 apps/examples/fstest: Add configuration option to customize stack size. Detect when the media is full and stop writing files. Report total file size. 2018-09-29 11:52:39 -06:00
Gregory Nutt
6aacb3e03f apps/examples/fstest: Fix coding error in last commit. 2018-09-29 07:47:46 -06:00
Gregory Nutt
4e6b356123 apps/examples/fstest/Kconfig: SPIFFS GC and integrity check option interferes SPIFFS. Appears to corrupt the file system. Now marked EXPERIMENTAL. 2018-09-28 20:07:40 -06:00
Gregory Nutt
a1be83cda9 apps/examples/fstest: Add logic to dump logic content of SPIFFS 2018-09-28 11:27:01 -06:00
Gregory Nutt
3abd6f2ac8 apps/examples/fstest: Fix a situation where a file system under test could cause the fstest to get stuck in an infinit loop. 2018-09-27 19:34:32 -06:00
Gregory Nutt
65d6e8871c apps/examples/fstest: Call statfs() and show state of file system on each loop. 2018-09-27 17:01:10 -06:00
Gregory Nutt
3ba19b0d9a examples/fstest: For SPIFFS, add garbage collection and file system integrity IOCTL calls. This was to avoid running out of FLASH space while running the fstest (ENOSPC=28). However, it does not work.. still runs out of memory. 2018-09-27 12:28:33 -06:00
Gregory Nutt
4bbfdbb9fa nshlib/, examples/: Update to show newer file system object types returned by stat(). 2018-09-22 13:24:24 -06:00
Eunbong Song
525e52ff70 apps/examples/adc/Kconfig: CONFIG_BOARDCTL_ADCTEST does not exist anymore and should removed as a dependency. 2018-09-18 07:28:34 -06:00
Gregory Nutt
42e99d59ce Correct some network-related configuration variable names. All *_MTU defines were changes to *_PKTSIZE gut that was not reflected in apps/ 2018-09-14 07:06:06 -06:00
Gregory Nutt
c5edf40542 apps/examples/udpblaster: Add option to use poll() on output (only). Also picks up some fixes to various typographical errors. 2018-09-14 06:59:23 -06:00
Gregory Nutt
0d98f640b4 apps/exmples/tcpblaster: Select CONFIG_LIBC_FLOATINGPOINT automatically. Units in output are wrong: Not Kbps bus Kb/Sec. 2018-09-10 13:13:56 -06:00
Gregory Nutt
25c2756a82 apps/examples/tcpblaster: Add an option to use poll() to pace input or output. 2018-09-10 12:13:18 -06:00
Gregory Nutt
305278d1ae Application.mk: Fix some issues when building directories such as fsutils/mkfatfs that have not mainobj. In this case, the MAINSRC is undefined and it would generate a bad linker command line. 2018-09-04 13:00:03 -06:00
anchao
7f5d8dfffe apps/: Fix build break in case sama5d4-ek/elf configuration. Also fix a patch problem in mkromfsimg.h. 2018-09-04 08:05:31 -06:00
anchao
b5cfd93444 apps/: Modification to build system: Unified application compilation rules 2018-09-03 09:29:56 -06:00
Ouss4
316ffaddac apps/ examples/dhtxx: Example for the DHTxx sensor. 2018-09-01 07:49:06 -06:00
Gregory Nutt
7b5c2de165 examples/ostest/signest.c: Attempt to make the nested signal test compatible with the suspend/resume test. Some signals cannot be caught when the suspend/resume configuration is in place. 2018-08-30 13:37:37 -06:00
Gregory Nutt
8b5c28ecc2 apps/ostest/suspend.c: Add a small test for SIGSTOP, SIGCONT, and SIGKILL actions. Currently does not work! 2018-08-30 12:00:41 -06:00
ligd
93f1c13b62 apps/: Call BOARDIOC_FINALINIT after start-up script (or immediately after BOARIOC_INIT is there is no start-up script). 2018-08-28 15:44:03 -06:00
EunBong Song
1ee6fbf296 Merged in ebsong/fork-apps (pull request #152)
Master

* nettest: fix typo!

    NET_LOOPBACK -> CONFIG_NET_LOOPBACK

    Signed-off-by: EunBong Song <eunb.song@samsung.com>

* nettest: fix compilation error.

    Should enable NET_SETSOCKOPT for preventing compilation error.

    Signed-off-by: EunBong Song <eunb.song@samsung.com>

Approved-by: GregoryN <gnutt@nuttx.org>
2018-08-28 13:46:49 +00:00
Gregory Nutt
0d6c9b8fbd apps/examples/ustream: Fix a typo that generates a warning when CONFIG_BUILD_LOADABLE is selected. 2018-08-25 16:56:53 -06:00
Gregory Nutt
2ef04ff0a8 apps/examples/sotest and modules: With recent changes, LDLIBS is initialized to bad value, at least in certain contexts. 2018-08-24 16:24:58 -06:00
Xiang Xiao
5304ec5eec Replace all ASSERT calls to DEBUGASSERT 2018-08-24 06:19:35 -06:00
anchao
220653f21c Squashed commit of the following:
Author: anchao <anchao@pinecone.net>

     apps/, most main() function: Correct CONFIG_BUILD_LOADABLE usage
     Loadable apps/: Correct loadable symbol table generate
     apps/system/ubloxmodem:  Fix build break
     apps/examples/ostest: start restart/waitpid/user test from main loop
     apps/nshlib:  Expand reboot and poweroff commands to include a second, optional mode argument

    Author: Gregory Nutt <gnutt@nuttx.org>

     An attempt to fix build issues.  Does not work.
     apps/examples/ostest:  Fix some inappropriate renaming of static functions introduced with recent patches.
     apps/builtin/exec_builtin.c:  Fix a error introduced by recent comments.  Found in build testing.

    Author: anchao <anchao@pinecone.net>

     apps/builtin/exec_builtin.c:  Try posix_spawn if builtin apps do not have have an entry point.
     apps/Application.mk: introduce MODULE config to simplify tristate(m)
     apps/nsh:  Change the nuttx shell module type to tristate
     apps:  Add loadable application support
     script/mksymtab:  Generate symbol table name by default
     apps/builtin:  Allow loadable applications can register with apps/builtin.
2018-08-23 11:06:15 -06:00
Gregory Nutt
d7bdf06055 apps/examples/module/Makefile: Correct module example build. Change to LDLIBs were causing a failure due to a non-existent (any unnecessary) library in this case. 2018-08-23 10:58:55 -06:00
Gregory Nutt
2f982e9c77 Revert "Squashed commit of the following:"
This reverts commit 25b92edd9f.
2018-08-22 12:06:32 -06:00
Gregory Nutt
4d9b55e623 Revert "apps/examples/ostest: Fix some inappropriae renaming of static functions introduced with recent patches."
This reverts commit b0cefbf1c7.
2018-08-22 12:06:22 -06:00
Gregory Nutt
b0cefbf1c7 apps/examples/ostest: Fix some inappropriae renaming of static functions introduced with recent patches. 2018-08-22 10:40:17 -06:00
anchao
25b92edd9f Squashed commit of the following:
apps/builtin/exec_builtin.c:  Try posix_spawn if builtin apps do not have have an entry point.
    apps/Application.mk: introduce MODULE config to simplify tristate(m)
    apps/nsh:  Change the nuttx shell module type to tristate
    apps:  Add loadable application support
    script/mksymtab:  Generate symbol table name by default
    apps/builtin:  Allow loadable applications can register with apps/builtin.
2018-08-22 09:30:38 -06:00
anchao
9fe6d2e1c3 Remove illegal calls into OS to initialize BINFMT support. This must be moved to the board initialization logic within the OS. 2018-08-22 07:53:35 -06:00
Gregory Nutt
5d72cae1d9 apps/examples/tcpblaster: Fix names several configuration setting that were changed incorrectly in a recent commit. 2018-08-22 07:53:35 -06:00
Gregory Nutt
8de513e36b apps/system/nsh: Move apps/examples/nsh to apps/system/nsh. It has become so entrenched that it is hardly an example these days. May as well formalized it as a system task. 2018-08-18 09:04:43 -06:00
Gregory Nutt
064d4024e4 apps/examples/popen: Add a test of popen/pclose. apps/system/popen: Fix some errors found using the new popen/pclose test. 2018-08-17 14:25:33 -06:00
Juha Niskanen
2e3f1c69d1 apps/examples/usrsocktest: Fix build error, 'daemon' redeclared as different kind of symbol 2018-08-15 06:15:16 -06:00
Gregory Nutt
6d01988fe8 apps/examples/calib_udelay/Kconfig: Select CONFIG_LIBC_FLOATINGPOINT needed by calibration logic. 2018-08-15 06:06:40 -06:00
Juha Niskanen
ed13a3ae27 examples/calib_udelay: Add tool for calibrating CONFIG_BOARD_LOOPSPERMSEC 2018-08-14 06:45:16 -06:00
Gregory Nutt
a89f0e3a07 Add missing function names in function headers. 2018-08-13 15:52:59 -06:00
Gregory Nutt
a57610c2c4 Remove trailing spaces at the end of lines. 2018-08-13 07:47:26 -06:00
Gregory Nutt
367093e65c apps/examples/module: Fix some chaos in conditional compilation. 2018-08-07 10:51:04 -06:00
Gregory Nutt
057eb80564 apps/examples/module: When built in the PROTECTED or KERNEL modes, the symbol table is not built by the application. That is because the build will fail since the kernel module depends on internal OS symbols thar are not available to the appliatino build. With this change the examples does not attempt to build the kernel symbol table in these modes. Instead it just copies the kernel module symbol table into the nuttx/pass1 directory where it can be build directly into the OS during pass2 of the build. 2018-08-07 09:15:01 -06:00
Gregory Nutt
af30085f9c apps/examples/module: Fix some error introduced with last changes to this example. Found in build testing. 2018-08-05 17:03:08 -06:00
Gregory Nutt
f5eeaf1fb6 examples/module: Add support for automounting removable media. This involves a wait for the block driver to become available before performing the mount. 2018-08-05 15:35:38 -06:00
Gregory Nutt
b980e943c7 apps/examples/module: Add support for CROMFS and for stripping symbols from ELF module binaries. 2018-08-05 14:10:44 -06:00
Gregory Nutt
6210fcae8b apps/examples/elf: Update some Kconfig comments. 2018-08-04 16:38:46 -06:00
Gregory Nutt
8572f223ae apps/examples/elf: If the test ELF files are on media in removable meda such as SD or USB FLASH, the wait until the media has been installed and initialized before starting the test. 2018-08-04 16:24:02 -06:00
Gregory Nutt
ba2d9e7c42 apps/examples/elf: CROMFS and ROMFS configuration currently only usable in FLAT build. Add configuration to use ELF objects on external media like SD card or USB drive instead. 2018-08-04 13:10:40 -06:00
Gregory Nutt
922283ee5d Squashed commit of the following:
Merged in masayuki2009/nuttx.apps/loadable_app (pull request #148)

    loadable app support

    * apps: Introduce a build system for loadable apps for nsh.

        This PR consits of following changes. (NOTE: Changes to each
        application will be provided separately)

        apps/nshlib/Kconfig:
        Add 'option modules' to NSH_FILE_APPS so that a user can change
        an application configuration to tristate (y/n/m)

        apps/Make.defs:
        Override COMPILE and COMPILEXX macros to compile loadable apps.
        To make loadable apps, -DLOADABLE_APP is added to the flags.
        Also, introduce ELFLD to link a lodable app.
        Please note that the variable 'LOADABLE' must be defined in
        each application Makefile if you want to make a loadable app.

        apps/Application.mk:
        Add .build target in case of 'LOADABLE=y' which is used to
        link a final loadable application and install the app to
        apps/bin.

        apps/Makefile:
        Add SYMTABSRC and SYMTABOBJ variables for loadable apps which
        will be generated under the apps directory.
        Add make_symbols target which will be called when all applications
        are installed to generate symtab_app.c which is used for
        nsh to inform symbol information to the NuttX kernel.

        Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

    * apps/examples/hello: Apply changes to support a lodable app.

        Kconfig:
        Change the application state from bool to tristate

        Make.defs:
        Change the condition to build. By default, the application is
        not selected (i.e. 'n'), so if other states (i.e. y/m) are
        selected, the application will be compiled.

        Makefile:
        If the application is specified to 'm', the variable 'LOADABLE'
        must be defined here. Also note that other variables (PRIORITY
        and STACKSIZE) can only be used for built-in apps.

        hello_main.c
        Add LOADABLE_APP condition to main().

        Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

    * apps/examples/helloxx: Apply changes to support a lodable app.

        Kconfig:
        Change the application state from bool to tristate

        Make.defs:
        Change the condition to build. By default, the application is
        not selected (i.e. 'n'), so if other states (i.e. y/m) are
        selected, the application will be compiled.

        Makefile:
        If the application is specified to 'm', the variable 'LOADABLE'
        must be defined here. Also note that other variables (PRIORITY
        and STACKSIZE) can only be used for built-in apps.

        helloxx_main.c
        Add LOADABLE_APP condition to main().

        Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

    Approved-by: GregoryN <gnutt@nuttx.org>
2018-08-03 12:05:01 -06:00
Gregory Nutt
f0b4f14396 Eliminate some new warnings reported in build testing. 2018-07-20 10:10:09 -06:00
Alan Carvalho de Assis
3cc79be2fb examples/lvgldemo/ and graphics/littlevgl/: pdate LVGL to version 5.1.1 2018-07-19 08:02:25 -06:00
Masayuki Ishikawa
9240ef5536 Merged in masayuki2009/nuttx.apps/fix_symtab_related (pull request #146)
Fix symtab related

* apps/tools: Add +x to mksymtab.sh

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

* apps/examples/nsh: Fix compile errors with CONFIG_EXAMPLES_NSH_SYMTAB=y

    Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: GregoryN <gnutt@nuttx.org>
2018-07-17 03:51:44 +00:00
Gregory Nutt
4db29bc2eb apps/examples/elf: Correct some Kconfig coments. 2018-07-16 12:10:16 -06:00
Gregory Nutt
878fa8afd5 Squashed commit of the following:
cosmetic

    import/:  Add Makefile.symtab which can be used to compile the dynamically created symbol table C file.

    Add tools/mksymtab.sh
2018-07-15 11:21:53 -06:00
Gregory Nutt
aea8d948d4 apps/examples/nsh: The symbol table name and size variale names can now be configured. 2018-07-14 16:47:06 -06:00
Gregory Nutt
5ecec24084 There many occurences of the global variable g_exports and the opportunity for collisions. Make the global variable names unique. 2018-07-14 16:36:25 -06:00
Gregory Nutt
e778a6990d Correct more improper global variable naming: All must begin with g_ 2018-07-14 16:23:42 -06:00
Gregory Nutt
7c1082bfcc apps/examples/nsh: Clean up some rather complex conditional compilation associated with the previous commit. 2018-07-13 06:52:56 -06:00
Masayuki Ishikawa
0ea260e1c3 apps/examples/nsh: Add logic to automatically register an application symbol table as part of NSH initialization. 2018-07-13 06:28:36 -06:00
Masayuki Ishikawa
6b938816d1 Merged in masayuki2009/nuttx.apps/fix_helloxx (pull request #144)
apps/examples/helloxx: Add main() for CONFIG_BUILD_KERNEL

Signed-off-by: Masayuki Ishikawa <masayuki.ishikawa@gmail.com>

Approved-by: GregoryN <gnutt@nuttx.org>
2018-07-13 11:52:46 +00:00
Gregory Nutt
654ee7e6f9 apps/examples/elf, module, posix_spawn: Correct naming of global variables that violations the naming requirements of the coding standard. 2018-07-12 09:53:38 -06:00
Gregory Nutt
db9c56e723 apps/examples/powerled: Eliminate a warning about an uninitialized variable. 2018-07-08 13:40:20 -06:00
Mateusz Szafoni
e66470df68 Merged in raiden00/apps (pull request #143)
initial commit for examples/dsptest - unit test for Nuttx DSP library

Approved-by: GregoryN <gnutt@nuttx.org>
2018-07-07 17:09:43 +00:00
Gregory Nutt
db77b1ec6c apps/examples/tcpblaster: Fix an error in time calculation. 2018-07-06 14:44:26 -06:00
Gregory Nutt
19b8a52500 apps/examples/tcpblaster/tcpblaster_server.c: Start time was not being initialized on the server side on the first pass through loop so the first output record had a crazy time. 2018-07-05 16:39:31 -06:00
Gregory Nutt
749eccb999 Squashed commit of the following:
apps/examples/tcpblaster:  Some improvements/fixes in statistics reporting.
    apps/examples/tcpblaster:  Add performance measurement functionality.
    apps/examples/tcpblaster:  Initial commit is just apps/examples/nettest/ with naming changes.
2018-07-05 16:03:54 -06:00
Alan Carvalho de Assis
36e04b3533 apps/examples/gps: Add GPS example using MINMEA lib 2018-06-09 17:54:18 -06:00
Gregory Nutt
c36a5c12cc apps/examples/ostest: Signal handling tests should use the same configurable stack size as used in other tests, not PTHREAD_STACK_DEFAULT. 2018-06-07 09:52:02 -06:00
Marco Krahl
0c867bc603 Merged in MarcoKrahl/apps/ltdc (pull request #139)
examples: Adds example to test framebuffer overlay

Signed-off-by: Marco Krahl <ocram.lhark@gmail.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-06-06 16:05:49 +00:00
Masayuki Ishikawa
0123480851 Merged in masayuki2009/nuttx.apps/i2sloop_test (pull request #137)
apps/examples/i2sloop: Add i2sloop application

This application can be used to test I2S loopback

  nsh> i2sloop &

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-06-06 12:45:51 +00:00
Gregory Nutt
6aa3e57004 Triva typo fixed. Also modify weird definition in import/Makefile. Still weird, but at least the directory exists. 2018-05-31 15:31:31 -06:00
Gregory Nutt
634dd7709b apps/, Various Makefiles: Fix mixed references to nuttx/lib. These need to be changed to nuttx/staging. 2018-05-30 11:08:13 -06:00
Alan Carvalho de Assis
9298bafa82 apps/examples/nxdemo: Add nxdemo application 2018-04-28 16:42:16 -06:00
Gregory Nutt
529cde02a2 apps/exmples/ostest: Eliminate a warning. 2018-04-22 15:29:59 -06:00
Juha Niskanen
d9210579b2 apps/examples/ostest: do not call AIO test without CONFIG_EXAMPLES_OSTEST_AIO 2018-04-11 07:09:47 -06:00
Tiago Almeida
5b85750307 apps/examples/max31855: Add an example to read multiple max31855 sensors 2018-04-09 15:19:14 -06:00
Bob Feretich
6a6ee2ffd2 apps/examples/adxl372_test and lxm330spi_test: Add ADXL372 and LSM330 tests. 2018-04-09 13:23:53 -06:00
Mateusz Szafoni
4d38b98054 Merged in raiden00/apps (pull request #134)
examples/powerled: add arch initialization; examples/smps: fixes in some printf and in Kconfig

Approved-by: Gregory Nutt <gnutt@nuttx.org>
2018-04-07 12:45:35 +00:00
Gregory Nutt
c026d5ea09 apps/exmaples/smps: Fix types in Kconfig. All power, voltage, current values were strings with no default. I assume they should be 'int' with what default? 2018-04-04 15:30:01 -06:00
Alan Carvalho de Assis
a62b8ff299 apps/examples/cc3000: This commit removes the CC3000 example. 2018-04-04 09:38:53 -06:00
Gregory Nutt
12baeaa22d apps/examples/elf: Add an option to strip debug symbols even if the debug symbols are enabled in the base code. 2018-03-25 10:13:50 -06:00
Gregory Nutt
9dcf0c5ecb apps/examples/elf: Use strip command to make ELF binaries MUCH smaller. 2018-03-25 09:39:18 -06:00
Gregory Nutt
e413211e6e apps/examples/elf: Remove some debug code that was left in the previous commit. 2018-03-24 12:49:37 -06:00
Gregory Nutt
dbdfad8ff5 apps/examples/elf: Extend the ELF program module demo so that you can use compressed ELF programs with CROMFS. 2018-03-24 11:36:20 -06:00
Gregory Nutt
28ce015fbb Remove canutils/libuavcan and examples/uavcan. libuavcan has not built for a year or so. The basic problem is that as NuttX advances, the old frozen versino of libuavcan has become absolute because it violates the portable POSIX OS interface. No one is maintaining the port so there is no alternative but to remove it. 2018-03-23 07:29:06 -06:00
Gregory Nutt
96b034d18d apps/examples/cromfs: Update Kconfig comments. 2018-03-20 19:53:29 -06:00
Gregory Nutt
08083d3b2e apps/examples/cromfs: Add an example of how to build a CROMFS file system image. 2018-03-20 08:44:16 -06:00
Gregory Nutt
de248dd952 apps/posix_spawn: Eliminate a warning. 2018-03-16 12:18:26 -06:00
Gregory Nutt
d1a3a58fbe apps/system/lzf: Move the LZF tool from apps/examples/ to apps/system. 2018-03-16 09:10:01 -06:00
Gregory Nutt
947cbf6d7b apps/examples/nsh and posix_spawn: Must not call exec_setsymtab() directly. That is a non-POSIX internal OS interface. 2018-03-16 08:51:49 -06:00
Boris Astardzhiev
df7f00b412 apps/examples/lzf: Fix name composition and set defaults early in main. 2018-03-15 10:47:51 -06:00
Gregory Nutt
177cc93051 apps/examples/lzf: unlzf and lzcat are not supported. 2018-03-15 09:23:44 -06:00
Gregory Nutt
7c70ca5006 apps/examples/lzf: lzf_compress() now expects the hash table as user allocated input parmeter rather than declaring the huge array on the stack. 2018-03-15 08:52:13 -06:00