The current essid setting(SIOCSIWESSID) are not satisfactory in case
of specified bssid connection, if there are multiple essids with same name,
we need additional bssid information to connect to the specified softap.
The extended flag "WAPI_ESSID_DELAY_ON" instructs the driver to delay the
connection behavior of essid, so that which can accept more accurate
information before generating a connection.
About flow of wapi command, drivers that support WAPI_ESSID_DELAY_ON semantics
will have the following behavior changes:
1. Station mode without bssid set:
$ ifup wlan0
$ wapi mode wlan0 2
$ wapi psk wlan0 12345678 3
$ wapi essid wlan0 archer 1
$ renew wlan0
2. Station mode with bssid set:
$ ifup wlan0
$ wapi mode wlan0 2
$ wapi psk wlan0 12345678 3
$ wapi essid wlan0 archer 2 <----- WAPI_ESSID_DELAY_ON will indicate the driver delay
$ the connection event late to bssid set (SIOCSIWAP).
$ wapi ap wlan0 ec:41:18:e0:76:7e
$ renew wlan0
Signed-off-by: chao.an <anchao@xiaomi.com>
Allow multiple NTP servers, also with runtime configurable list
Add validation of received NTP packets
NTPv4 support with 'Kiss o' Death' message handling
IPv6 support
Collect multiple NTP samples and filter outsiders
Check if system clock has been altered during NTP (if CONFIG_CLOCK_MONOTONIC)
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
N/A
which record and play raw data using audio subsystem
to verify audio record and playback function
Signed-off-by: danguanghua <danguanghua@xiaomi.com>
Change-Id: I2c768b8e8234a31f9622cb9955f785329cf402a5
Signed-off-by: danguanghua <danguanghua@xiaomi.com>
This fixes the case when webclient_set_static_body is used
for data larger than webclient_context::buflen.
Note: as of writing this, webclient_set_static_body is the
only user of body_callback in NuttX apps tree.
Therefore, the associate can support the connection of specified
channel if the scan results contain the multiple AP with same essids.
Change-Id: I4e657c52e638693e7ae19aea2a4fe8a431885547
Signed-off-by: chao.an <anchao@xiaomi.com>
Uses logic from apps/fsutils/ipcfg to obtain the IP address configuration from a file, if available. This only effects the behavior of netinit if CONFIG_FSUTILS_IPCFG is selected and if an IP configuration file is available on a file system. Otherwise, it reverts to the preceding behavior.
Also adds definitions to apps/include/fsutils/ipcfg.h to formalize a bit encoding of the prototype which was already in use, but not documented.
Also fixes some bad assertions (duplication of PR #420) and makes use of variable names consistent in ipcfg.h comments and in ipcfg_text implementation.
This commit adds structures, modifies function prototypes, and renames data to support the future addition of IPv6 support. This commit does NOT add that IPv6, only the hooks for backward compatible future support.
Highlights:
* TLS support (a hook to allow users to provide TLS implementation)
* ability to add extra request headers
* ability to use PUT method
* ability to report http status
* error handling improvements
Proposed on the ML while ago:
https://www.mail-archive.com/dev@nuttx.apache.org/msg03803.html
The original API is kept for now.
I plan to remove them after adapting the existing users.
(examples in this repo)
This commit adds support to access an IPv4 Configuration file similar to the Linux dhpc.client ipfcg file. This version, tailored for deeply embedded systems supports several options to tailor the file and file access to different environments. It supports:
- Writable as well as read-only configuration files.
- ASCII human readable files as well as smaller binary files.
- It supports using character driver access to constrained media (such as EEPROM).
- Add examples/ipcfg to exercise IPv4 Configuration File support
since it is moved to the central place in nuttx side instead
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I544d6110f1ca6460f7c82f970870aa9b1e7ab3dd
src/cwindowfactory.cxx: In member function 'void Twm4Nx::CWindowFactory::redrawIcons(const nxgl_rect_s*)':
src/cwindowfactory.cxx:461:38: warning: 'iconPos.nxgl_point_s::y' may be used uninitialized in this function [-Wmaybe-uninitialized]
461 | iconBounds.pt2.y = iconPos.y + iconSize.h - 1;
| ~~~~~~~~^
src/cwindowfactory.cxx:460:38: warning: 'iconPos.nxgl_point_s::x' may be used uninitialized in this function [-Wmaybe-uninitialized]
460 | iconBounds.pt2.x = iconPos.x + iconSize.w - 1;
| ~~~~~~~~^
nsh_netcmds.c:424:20: warning: 'nsh_addrconv' defined but not used [-Wunused-function]
static inline bool nsh_addrconv(FAR const char *hwstr,
^
nsh_netcmds.c:446:20: warning: 'nsh_sethwaddr' defined but not used [-Wunused-function]
static inline void nsh_sethwaddr(FAR const char *ifname,
^
nsh_envcmds.c:94:21: warning: 'nsh_getdirpath' defined but not used [-Wunused-function]
static inline char *nsh_getdirpath(FAR struct nsh_vtbl_s *vtbl,
^
In file included from bas.c:84:0:
bas.c: In function 'bas_interpreter':
bas_error.h:110:37: warning: left-hand operand of comma expression has no effect [-Wunused-value]
#define NOSUCHLINE STATIC+40, _("No such line")
^
bas.c:2425:52: note: in expansion of macro 'NOSUCHLINE'
FS_putChars(STDCHANNEL, (NOSUCHLINE));
^~~~~~~~~~
bas_fs.c:107:22: warning: 'g_vt100_colormap' defined but not used [-Wunused-const-variable=]
static const uint8_t g_vt100_colormap[8] =
^~~~~~~~~~~~~~~~
<stdout>:4048:16: warning: 'input' defined but not used [-Wunused-function]
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I62610b4c90e67637250cbd0107c2935c8abc542f
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Check POLLHUP and POLLERR in telnet poll loop
to handle the remote end close correctly
Send "NVT"(network virtual terminal) as the default if getenv("TERM") return NULL
telnet should trigger the error handling if inet_pton return zero
since zero mean the string has format error
Don't return 1 in _environ_telnet to avoid trigger the compression
and remove the redundant TELNET_TELOPT_COMPRESS2 check
Change telnet_error_u to telnet_error_e required by the coding standard
Ensure telnet object get freed before the abnormal exit
Run all .c and .h files in last PR through nxstyle and fix all complaints.
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Wapi improvement (#16)
* wireless: add passphrase control
* wireless: add disconnect control
apps/netutils/dhcpd/dhcpd.c: Fix unused const variable
dhcpd.c:273:29: warning: 'g_anyipaddr' defined but not used [-Wunused-const-variable=]
static const uint8_t g_anyipaddr[4] = {0, 0, 0, 0};
apps/netutils/dhcpd: Make dhcpd interface configurable
apps/netutils/dhcpd: Lease address directly if hit in address range
apps/netutils/netinit: Initialize dhcpc_state
update the addresses only on request success
1.Remove void cast for function because many place ignore the returned value witout cast
2.Replace void cast for variable with UNUSED macro
Change-Id: Ie644129a563244a6397036789c4c3ea83c4e9b09
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Some improvements to netutils/cjson and testing/unity
* netutils/cjson/Makefile: fix the error when creating Make.dep
* testing/unity/Makefile: fix the error when creating Make.dep
* include/.gitignore: ignore cJSON headers
* netutils/cjson/Kconfig: update default version to 1.7.12. Previous releases raise compilation warnings about redefined true/false
Approved-by: Gregory Nutt <gnutt@nuttx.org>
I8sak improvements
* wireless/ieee802154: Adds support for getting/setting maxretries and promsicuous mode from i8sak
* wireless/ieee802154/i8sak: Fixes a build warning and handles a few cases where a fault can occur due to not catching missing arguments.
Approved-by: Gregory Nutt <gnutt@nuttx.org>
apps/examples/webserver: Fix to compile with CONFIG_NETUTILS_HTTPD_SENDFILE=y
Also, in this PR, some configs such as CONFIG_NETUTILS_HTTPDFILESTATS
can be selected by menuconfig.
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
apps/graphics/tmw4nx and apps/graphics/slcd: This seems the last of the show stopper bugs. All seems functional.
apps/graphics/slcd: Correct some errors found in early texting. Now the Twm4Nx::CClock window comes up, but there are problems with the way that the segments are being displayed.
apps/graphicx/twm4nx: CClock is complete and compiles correctly. Crashes with a hardware when the clock is selected from the Main Menu, however.
apps/graphics/slcd: With these changes the CSLcd class now compiles
successfully. Still untested.
apps/graphics/slcd: Finish off rendering. Hook into configuration and build system.
apps/graphics/nxglyphs: Add images that will eventually be used for clock icons
apps/graphics/slcd: Completes all CLcd methods except for rendering to the window.
apps/graphics/slcd: Add beginning of SLCD class.
Add ASCII to SLCD character mapping.
apps/graphics/slcd: Represent segments as runs rather than trapezoids. Trapezoids will be synthesized later.
A little more SLCD logic
apps/graphics/slcd: Flesh out more trapezoids in the decomposition.
apps/graphics/twm4nx: Revise logic to detect clicks on the background image. The original implementation had some side effects.
apps/graphics/twm4nx: Remove some remaining, unused stuff from TWM that was never used. Menus need to close after the 'terminal' selection is made. Otherwise, the menu can become buried under a newly open menu and not easily recovered.
apps/graphics/twm4ndx: Add a 'critical' bit to the eventID. While resizing, all events will be ignore except those marked critical.
apps/graphics/twm4nx: CBackground now brings up the main menu if the background image is click. This makes the behavior the same across all of the background except when an icon is clicked.
apps/graphics/twm4nx: Adds some colors and better style control to support the CONTEMPORARY theme. Still getting a few artifacts on the display.
apps/graphics/twm4nx: Use custom CWidgetStyle to force Icon background to match selected desktop background.
apps/graphics/nxglyphs: Add more modern looking button images for the Twm4Nx CONTEMPORARY theme
apps/graphics/twm4nx: Add some definitions to support Themes. Background image is now optional.
apps/graphics/twm4nx: Fix an uninitialized variable that was causing toolbar buttons to randomly come up enabled or disabled. Remove some unused event definitions.
apps/graphics/twm4nx: Fix a calibration screen startup issue. Make an initial calibration scrren optional
Squashed commit of the following:
apps/graphics/twm4nx: The calibration seems to be functional. Needs more testing.
apps/graphics/twm4nx: Extend event handling to support receiving raw, uncalibaated touchscreen inputs. This is needed for touchscreen calibration.
apps/graphics/twm4nx: Extend event handling to support shutting down of externally controlled windows. This is need to end the calibration sequence.
apps/graphics/twm4nx: CCalibration now compiles okay, but is missing event handling logic for touchscreen input and for window termination.
apps/graphics/twm4nx: Move application-related files into different directories to separate them from the core Twm4Nx files.
apps/graphics/twm4nx: A little more progress on calibration display.
app/graphics/twm4ndx: Add files that will support a calibration display. This initial commit is simply the calibration display from NxWM and is not hooked into the configuration or build systems.
apps/graphics/twm4ndx: Compile out cursor support if we are using a mouse
apps/graphics/twm4nx: Clean up some build issues.
apps/graphics/nxglyphs: Remove some warnings due to coupling with NXWM.
apps/graphics/twmndx: Separate out the main() entry point for ctwm4nx.cxx. There is functionality there that does not involve CTwm4Nx and so it is better if the main function were totally separate.
