A nuttx with the matter command can be compiled using cmake and enable CONFIG_MATTER option.
The matter compiled by the current script is just a lighting example of
a limited number of commands that can be tested by chip-tool.
After nuttx is connected to the LAN and the matter command is executed, other devices in the LAN, such as linux PCS, can run the following commands to scan, connect, turn on and off, adjust brightness and contrast, and so on.
chip-tool pairing onnetwork 1 20202021
chip-tool onoff on 1 1
chip-tool levelcontrol move-to-level 128 10 0 0 1 1
chip-tool colorcontrol move-to-hue-and-saturation 240 100 0 0 0 1 1
Depends on the following configuration options:
CONFIG_CRYPTO_MBEDTLS=y
CONFIG_DEV_URANDOM=y
CONFIG_LIBCXX=y
CONFIG_LIBM=y
CONFIG_NET_IPv6=y
CONFIG_NET_ICMPv6=y
CONFIG_NET_ICMPv6_AUTOCONF=y
CONFIG_NET_ICMPv6_NEIGHBOR=y
CONFIG_NET_ICMPv6_ROUTER=y
CONFIG_NET_ICMPv6_SOCKET=y
CONFIG_NET_IGMP=y
CONFIG_NET_MLD=y
CONFIG_NET_MLD_ROUTER=y
This initial version does not yet have Bluetooth and OTA support.
The community version needs to dynamically fetch the matter source code at compile time and apply the required nuttx adaptation patch.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Note:
The `SIOCSIFADDR` and `SIOCDIFADDR` uses different params for `AF_INET` and `AF_INET6` (`struct ifreq` vs `struct in6_ifreq`) as defined by https://man7.org/linux/man-pages/man7/netdevice.7.html
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Waiting for an hour can cause the calculated tick count in nxsem_clockwait to overflow due to the default width of sclock_t.
Reduce the long wait period on platforms not using 64-bit time.
Calling getrandom depends on 'CONFIG_DEV_URANDOM' or 'CONFIG_DEV_RANDOM'
depends on patch https://github.com/apache/nuttx/pull/10925
Signed-off-by: makejian <makejian@xiaomi.com>
Support Stateless and Stateful. The renew6 is used as follows:
- Stateless: renew6 eth0
- Stateful: renew6 eth0 1
Signed-off-by: liqinhui <liqinhui@xiaomi.com>
What works:
- Basic server & client operation
- Transmission and reception of announce, sync and follow-up
Still missing:
- SO_TIMINGS for getting more precise packet timestamps
- Implementation of delay_req and delay_resp packets
- Status and stop interfaces for the daemon
If a daemon app(e.ot_client) starts dhcpd by calling dhcpd_start and needs to shut it down after use,
then the global static variables ds_inpacket and ds_outpacket will always occupy the data area,
causing unnecessary waste.
Signed-off-by: wangyingdong <wangyingdong@xiaomi.com>
The mqttc demo under example path can not support mbedtls api.
Because of the MQTT-C source code already contains many types of
link examples, so we added the corresponding makefile to
support mbedtls mqttc connections publisher and posix mqttc
connections publisher and subscriber.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Change the timeout period of ntpclient to configurable to reduce the impact
The NTP packet is lost during the first TLS connection after the board is started.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
using popen with r+,w+ mode to interact with the remote service on
the command line, supporting input and output until the local
voluntarily exits or the remote service ends.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
Add xtables.c and xtables.h
In order to support the compilation of third-party utils, we encounter some
situations where the macro is not defined, refer to the common implementation
of other systems, add relevant definitions and empty function.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Socket binded to INADDR_ANY is not intended to receive unicast traffic before being fully configured, at least dhclient configured with socket-only won't do so on Linux and BSDs (https://github.com/isc-projects/dhcp/blob/v4_4_3/common/socket.c#L1201).
We can sometimes receive unicast traffic before being fully configured, it's good, but not always, so we need to set the broadcast flag under some situations.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Add missing FAR and CODE to pointers
Remove FAR for non-pointer variables
Remove extra spaces and align the parameters
Add do {} while(0) wrapper in macro
Use nitems to calculate number of elements in arrays
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
In dns_add_nameserver, the dns_check_nameserver is comparing addresses
with addrlen = sizeof(struct sockaddr_in) for IPv4 addresses, so the
trailing sin_zero field should be 0, otherwise it may fail to figure out
same nameserver address.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
The flag '-Wno-maybe-uninitialized' is not known by clang, so a
workaround substitutes it for '-Wno-uninitialized' when clang is
being used as C compiler.
Usage:
iperf -s --rpmsg <name>
iperf -c <cpu> --rpmsg <name>
Note:
RPMsg with SOCK_DGRAM (`-u`) doesn't have server mode (bind) yet, iperf
may not work in this case before rpsock is enhanced.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Usage:
iperf -s --local <path>
iperf -c <path> --local || iperf -c <whatever> --local <path>
Can combine with other options, e.g. '-u' will result in local
UDP (DGRAM).
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
We'll add local/rpmsg sockets later, they're mainly different in
sockaddr, we can reuse other current logic.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Argtable's builtin glossary can produce same output and we do not need
to maintain two sets of help string. Then we're easier to add more
options to iperf.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
The timer is for connect timeout, but is not cancelled on connect error,
then it may be triggered after ftpc quit and cause heap-use-after-free.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
The current WiFi configuration expects user to look at symbols in
the wireless headers to configure it. This patch will improve it.
Notice that even those symbols that are bitfields are not allowed
to have more than 1 bit set at time.
