sergiotarxz/nuttx-apps
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
4,814 Commits 1 Branch 0 Tags 24 MiB
7f48576218
Commit Graph

58 Commits

Author SHA1 Message Date
Xiang Xiao
deaa6c5b7b build: Replace $(TOPDIR)/Make.defs with $(APPDIR)/Make.defs 
and move NUTTXLIB defintion to the common place

Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2020-07-09 15:17:37 -03:00
Xiang Xiao
ead498a788 build: Remove the workaround for the inexistence of .config/Make.defs 
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
 2020-05-21 17:43:42 +01:00
Gregory Nutt
3a23523147 Makefiles: This reverts part of commit cf0365ea9. It restores 'conditional' inclusion of TOPDIR/Make.defs. Otherwise all make targets fail if the board has not been configured. That is okay most of the time, but not for things like clean and distclean which should not depend on being configured. 2019-10-15 09:25:48 +08:00
Xiang Xiao
cf0365ea92 Clean up Makefile under apps folder no functional changes. 2019-10-04 08:35:46 -06:00
Gregory Nutt
94a0d92b54 This commit removes the private network initialization logic from NSH and puts in a common location at apps/netutils/netinit. Now that netork initialization logic can be used by applications that do not include NSH. 
Squashed commit of the following:

    apps/nshlib:  Remove NSH initialization.  Now uses the common apps/netutils/netinit logic (which was cloned from nshlib to begin with).

    apps/netutils/netinit:  Clone network initialization logic from NSH to this directory so that it can be available for general use.
 2019-04-29 10:22:56 -06:00
Gregory Nutt
9db029e318 The file system can no longer be disabled. Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS==0 2019-02-11 13:10:10 -06:00
GregoryN
3bf4b6d245 Merged altconsole into master 2018-12-08 18:53:54 -06:00
Alan Carvalho de Assis
c21d640eaf apps/nshlib: Add support to use SLCD as NSH Console 2018-11-29 18:42:02 -06:00
Gregory Nutt
e9edfd064f apps/nshlib: Add support for NSH local variables if CONFIG_NSH_VARS are set. These are like environment variables but are local to NSH. The importance of this is that these variables are *not* inherited when NSH creates a new task. The new command 'export' was added. In this case, the NSH variable will be promoted to an environment variable and will then be inherited by any tasks executed by NSH. 2018-10-01 13:30:25 -06:00
anchao
b5cfd93444 apps/: Modification to build system: Unified application compilation rules 2018-09-03 09:29:56 -06:00
Gregory Nutt
7a8561728c The last change added .PRECIOUS: $(BIN) to everyway Makefile in hopes the libapps.a will not be deleted on Control-C (unproven so far). However, $(BIN) may contain back slashes in some build platforms and that causes problems for make: It can't handle the backslashes in the .PRECIOUS dependency list. $(BIN) replaced with ../../libapp.a, where the number of ../ depends on the depth of the Makefile in the apps/ source tree. 2017-08-13 11:03:17 -06:00
Gregory Nutt
a66da34f18 All Makefiles: Add .PRECIOUS: apps/libapps.a to every Makefile. Hopefully this will end awkward problems when you Control-C out of a build and libapps.a is deleted. 2017-08-13 09:35:14 -06:00
Gregory Nutt
8c1446671c apps/nshlib: Add a new option CONFIG_NSH_NETLOCAL that will suppress some built in operations and will support manual configuration of a wireless network 2017-05-21 12:00:55 -06:00
Simon Piriou
523d7645c4 wapi: add basic wapi_event_stream_extract implementation 2017-05-21 16:24:49 +02:00
Gregory Nutt
a0915850b9 wireless/wapi: wpa_driver_wext_associate() now accepts a configuration parameter that can be used to specify the wireless properties. nshlib: NSH now has configuration options to select the wireless properties. It builds the configuration structure and passes this to wpa_driver_wext_associate() so that it will setwork the network as configured. 2017-05-06 11:28:11 -06:00
Alan Carvalho de Assis
cdedb412ed apps/nshlib: Add printf command to NSH, e.g., controlling /dev/userleds from command line: nsh> printf \x01 > /dev/userleds 2016-10-01 07:44:15 -06:00
Gregory Nutt
4eda22b4db Revert "This commit adds nsh_consolechild(). I noticed that there are several examples that call nsh_consolemain.c to create to create a new NSH session. That will not always work because nsh_consolemain() performs the one-time initialization needed by the NSH library: Mounting, reading, and running the start-up script, configuring USB tracing. Some of those actions will cause failures if attempted twice." 
This reverts commit 4d364d836a.
 2016-08-25 14:19:36 -06:00
Gregory Nutt
4d364d836a This commit adds nsh_consolechild(). I noticed that there are several examples that call nsh_consolemain.c to create to create a new NSH session. That will not always work because nsh_consolemain() performs the one-time initialization needed by the NSH library: Mounting, reading, and running the start-up script, configuring USB tracing. Some of those actions will cause failures if attempted twice. 
Here are some offenders: examples/cc3000/shell.c, examples/nsh/nsh_main.c, examples/nxterm/nxterm_main.c, and examples/pty_test/pty_test.c.  It is possible that for some of those, that represents the first call to nsh_consolemain().  But probably not.

To give other initialization options, I added nsh_consolechild() which is identical to nsh_consolemain() other than it omits all of the one-time initialization.  Of course, you would not get the result that you wanted if nsh_consolechild() were called without nsh_consolemain().
 2016-08-25 14:14:23 -06:00
Gregory Nutt
e39cfc97c7 Add logic to support an NSH-specific system command 2016-08-25 11:34:36 -06:00
Sebastien Lorquet
bfff5e7179 Add empty preconfig rules to 'leaf' makefiles 2016-06-02 16:24:30 +02:00
Gregory Nutt
0720f9a357 NSH: Add option to use platform-specific logic to verify login credentials; Add option to add a delay after each failed login attempt 2016-01-22 10:46:19 -06:00
Gregory Nutt
07cf99130c nsh_stdsession() cannot use the same login logic as nsh_session(); Also put telnet login in a separate file for symmetry 2016-01-20 15:22:02 -06:00
Gregory Nutt
93d9d5e4ca apps/nshlib: All NSH sessions may now be protected with passwords stored in the encrypted /etc/passwd file 2016-01-20 14:42:39 -06:00
Gregory Nutt
fe05a8444f apps/nshlib: Add useradd, userdel, and passwd commends 2016-01-20 09:37:25 -06:00
Gregory Nutt
f0a21d3d48 NSH: Add module commands: insmod, rmmod, and lsmod 2015-12-13 09:55:52 -06:00
Gregory Nutt
32b992971b apps/nshlib: The 'ifconfig' command now uses /proc/net/stat to show network statistics. A consequence of this is that you cannot view network statistics if the procfs is not enabled and mounted at /proc 2015-11-27 13:04:11 -06:00
Gregory Nutt
a18ed33d99 NSH now supports a shutdown command if CONFIG_BOARDCTL_POWEROFF-y 2015-07-04 08:20:19 -06:00
Gregory Nutt
23075e0b30 Allow NSH date command with no RTC. This command is useful without an RTC too. Also, this permits testing on the simulator which never has an RTC 2015-04-11 12:13:18 -06:00
Gregory Nutt
d6bcd1a93a Add an install target to all makefiles. For the import build, the top-level Makefile now does two passes: (1) builds libapp.a, then (2) installs the programs (not yet finished) 2014-09-06 08:00:47 -06:00
Gregory Nutt
9a49735c4b NSH: Add an option to take stdin from a USB keyboard device 2014-07-03 16:25:02 -06:00
Gregory Nutt
819a4b5779 NSH: Separate command line parsing from command execution. Add support for multiple, semicolone separated commands on each line 2014-01-10 15:23:26 -06:00
Gregory Nutt
ff88e86ef2 Add NSH addroute and delroute commands 2013-10-05 15:42:20 -06:00
Gregory Nutt
c4e46f5b62 Changes to NSH and readline to permit NSH to work on a platform with no file system 2013-09-30 11:34:04 -06:00
patacongo
978d3212ff Add support for a login script (in addition to the init script); Add logic so that a USB console session can connect and reconnect to the USB serial device 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5582 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-29 22:11:04 +00:00
patacongo
140d3e4374 NSH will now run files from the file system; Add logic to unload and clean-up after running a task from a file system; Extensions to builtin apps from Mike Smith 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5529 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-17 18:32:13 +00:00
patacongo
b81afc12fd Implement redirection of output from NSH builtin commands to a file in a mounted volume 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5521 42af7a65-404d-4744-a932-0658087f49c3
 2013-01-15 21:01:37 +00:00
patacongo
b104cce86b Remove .context kludge from apps/ directory 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5455 42af7a65-404d-4744-a932-0658087f49c3
 2012-12-23 22:17:09 +00:00
patacongo
08f0823241 Missing comma in EVERY DELFILE/DELDIR macro call in every Makefile 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5373 42af7a65-404d-4744-a932-0658087f49c3
 2012-11-20 15:47:41 +00:00
patacongo
1d7bb0fa07 Most of the changes needed to support Windows native clean; distclean is has a problem 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5367 42af7a65-404d-4744-a932-0658087f49c3
 2012-11-17 18:54:53 +00:00
patacongo
c729930c69 Move some (hopefully) un-necessary quotes in Makefiles for Mike 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5356 42af7a65-404d-4744-a932-0658087f49c3
 2012-11-15 17:43:29 +00:00
patacongo
fdb8f8a0de Changes to get a clean ez80 build using the ZDS 5.1.1 toolchain 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5341 42af7a65-404d-4744-a932-0658087f49c3
 2012-11-12 15:22:27 +00:00
patacongo
3e25d82213 Correct some issues with last check-in; ez80 still does not build 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5339 42af7a65-404d-4744-a932-0658087f49c3
 2012-11-11 23:44:31 +00:00
patacongo
ffe4fc1c0c Partial change: Removing bash ARCHIVE loop 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5336 42af7a65-404d-4744-a932-0658087f49c3
 2012-11-11 16:24:40 +00:00
patacongo
97fd74fbdd Add apps/netutils/codecs and associated NSH commands from Darcy Gong 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5280 42af7a65-404d-4744-a932-0658087f49c3
 2012-10-31 14:36:00 +00:00
patacongo
f5544c80cf Extend the NSH mount command so that it will enumerate mountpoints if no arguments are provided 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5006 42af7a65-404d-4744-a932-0658087f49c3
 2012-08-03 23:47:32 +00:00
patacongo
e8c43f0463 Add support for use of a USB serial device to provide NSH console I/O. Verified on the Sure PIPIC32MX board 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4458 42af7a65-404d-4744-a932-0658087f49c3
 2012-03-06 20:21:57 +00:00
patacongo
5c43eed652 FTPD daemon and example now build without errors 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4371 42af7a65-404d-4744-a932-0658087f49c3
 2012-02-05 17:36:13 +00:00
patacongo
f392209c72 NSH now uses the new Telnet daemon and built-in tasks started by NSH can be used over Telnet 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4361 42af7a65-404d-4744-a932-0658087f49c3
 2012-02-02 16:04:09 +00:00
patacongo
c2266ac99a If we are using a USB serial console, then NSH must wait for the USB device to be connected 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4327 42af7a65-404d-4744-a932-0658087f49c3
 2012-01-24 00:00:31 +00:00
patacongo
39df853260 Add NSH date command 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3932 42af7a65-404d-4744-a932-0658087f49c3
 2011-09-01 15:09:49 +00:00