sergiotarxz/nuttx-apps
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
7,801 Commits 1 Branch 0 Tags 24 MiB
82fb1a4511
Commit Graph

1087 Commits

Author SHA1 Message Date
Gregory Nutt
fe41f72a95 Fix typo found in building testing. There will probably be a few more. 2019-02-11 13:25:48 -06:00
Gregory Nutt
9db029e318 The file system can no longer be disabled. Remove all conditional logic based on CONFIG_NFILE_DESCRIPTORS==0 2019-02-11 13:10:10 -06:00
Gregory Nutt
b1352458ab apps/nshlib/nsh_netinit.c: Update for changes to signal notification structures. 2019-01-27 16:45:56 -06:00
David Sidrane
7db2a352fb nshlib/nsh_console.h: Fix copy paste errors. Some Kconfig configuration names needed CONFIG_ prefix. 2019-01-24 06:36:26 -06:00
Gregory Nutt
6fb399fd65 Update README 2019-01-19 08:54:01 -06:00
Masayuki Ishikawa
060a8fff4b Merged in masayuki2009/nuttx.apps/fix_redirection_error (pull request #167) 
apps/nshlib: Fix buffer overrun when redirected to a file.

SAVE_SIZE must be the same as sizeof(struct serialsave_s)

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: GregoryN <gnutt@nuttx.org>
 2019-01-19 12:38:49 +00:00
Anthony Merlino
7cde7e921d Merged in antmerlino/apps/addroute-default-gw (pull request #166) 
addroute: Adds command for setting default gateway. addroute default <ipaddr> <interface>

Approved-by: GregoryN <gnutt@nuttx.org>
 2019-01-13 14:20:15 +00:00
Ken Pettit
e08d100919 apps/nshlib/nsh_parse.c: Fixes an error in the NSH parser. There was a bug when executing an nsh shell script which contains a redirection. When the command in the script is executed, it sets the vtbl->np.np_redirect flag (as it should), but then doesn't restore it, leaving it set at the end of the script execution. Then the vtbl->np.np_redirect flag is set when the 'sh' command completes, causing a restore from un-initialized variables, thus leading to a crash. See the code snippet below for an example test case. 
Test case:

NuttShell (NSH)
nsh> mkrd -s 1024 40
nsh> mkfatfs /dev/ram0
nsh> mount -t vfat /dev/ram0 /tmp
nsh> echo "echo 1 > /dev/null" > /tmp/test.sh
nsh> cat /tmp/test.sh
echo 1 > /dev/null
nsh> sh /tmp/test.sh
...

The nsh prompt doesn't get printed.  You can type a couple of commands, but then the system will crash because of bad pointers.
 2019-01-12 10:56:48 -06:00
Gregory Nutt
eaec674e7b apps/nshlib/nsh_command.c: In all multi-column help output, make the number of rows presented dependent upon the maximum width of the widest column. 2019-01-11 09:21:59 -06:00
Gregory Nutt
d789194836 apps/nshlib/nsh_command.c: In all multi-column help output, calculate an optimal column width rather than using a hard-coded width that may or may not be appropriate. 2019-01-11 08:59:36 -06:00
Gregory Nutt
806ba4ee83 apps/nshlib/nsh_command.c: Fix a few long lines 2019-01-11 07:39:23 -06:00
Ken Pettit
a6d056cf76 apps/nshlib/nsh_command.c: display built-in apps using multi-column mode like the nsh commands 2019-01-11 07:35:04 -06:00
Gregory Nutt
3257ea42d5 apps/nshlib/nsh_parrse.c: Correct some coding standard problems in last PR. 2019-01-06 10:00:19 -06:00
Daniel Agar
c700bf9739 Merged in dagar/nuttx-apps/pr-nshlib (pull request #163) 
[WIP] nshlib add var expansion in nsh parse

Approved-by: GregoryN <gnutt@nuttx.org>
 2019-01-06 15:52:18 +00:00
GregoryN
3bf4b6d245 Merged altconsole into master 2018-12-08 18:53:54 -06:00
David Sidrane
8eb249eea5 apps/nshlib/nsh_romfsetc.c: Add support for CROMFS start-up script 2018-12-06 15:41:18 -06:00
Alan Carvalho de Assis
368f14852e apps/nshlib: Change the way SLCD is supported. Works better 2018-11-30 18:05:18 -06:00
Lwazi Dube
2b8685b63f wireless/bluetooth/btsak/btsak_main.c: Fix address parsing 2018-11-30 06:28:36 -06:00
Gregory Nutt
c0f64622e4 nshlib/nsh_slcd.c: Use file descriptor zero for the NSH console. 2018-11-30 06:18:44 -06:00
Alan Carvalho de Assis
c21d640eaf apps/nshlib: Add support to use SLCD as NSH Console 2018-11-29 18:42:02 -06:00
Lwazi Dube
6af45bdee0 wireless/bluetooth/btsak: Fix some errors in btsak 2018-11-27 08:02:43 -06:00
Xiang Xiao
2db0252e61 nshlib/nsh_envcmds.c: Fix warning g_oldpwd defined but not used [-Wunused-const-variable] 2018-11-07 11:28:28 -06:00
Xiang Xiao
6aee984c91 nshlib/nsh_netinit.c: Move call netlib_icmpv6_autoconfiguration() into nsh_net_bringup() like DHCP 2018-11-07 11:25:39 -06:00
Xiang Xiao
173c985395 nshlib/nsh_fsutils.c: nsh_catfile() should not append '\n' if the last char in file is already '\n' 2018-11-07 11:23:07 -06:00
ligd
19dc7cd3b3 nshlib/nsh_console.c: Add fflush to nsh_consolewrite(). This resolves this problem: 
> cat /dev/ttyCP &
  > echo ls >/dev/ttyCP

Can't get the 'ls' result immediately, because 'cat' cmd uses nsh_consolewrite() and that uses fwrite with no fflush. We can get the 'ls' result after type '\n', because nsh will fflush output when get '\n'.
 2018-11-07 11:18:03 -06:00
Gregory Nutt
b5e032e050 apps/nshlib/README.txt: Another trivial update. 2018-10-02 13:47:16 -06:00
Gregory Nutt
3a474c573c apps/nshlib/README.txt: Trivial correction in comparison to Bash behavior. 2018-10-02 12:15:07 -06:00
Gregory Nutt
cf6c6a9556 apps/nshlib: If CONFIG_NSH_VARS=y, the NSH 'set' command with not argument will list all of the local NSH variables. 2018-10-02 11:54:18 -06:00
Gregory Nutt
cb982ea8df apps/nshlib: Eliminate more new warnings found in build testing. 2018-10-02 11:16:15 -06:00
Gregory Nutt
2bc4d1e8e2 apps/nshlib/nsh_parse.c: Fix a warning (really a bug) detected in build testing. 2018-10-02 11:08:17 -06:00
Gregory Nutt
7f7b728231 apps/nshlib/nsh_parse.c: Correct an error in conditional compilation found in build testing. 2018-10-02 10:21:33 -06:00
Gregory Nutt
8b01ea4434 Update a README/Improve some C comments. 2018-10-02 06:53:16 -06:00
Gregory Nutt
65e0b791b7 apps/nshlib/nsh_envcmds.c: Once an NSH variable has been promoted to an environment variable, subsequent set operations should act on the environment variable rather than creating a new NSH variable that shadows the environment variable. 2018-10-01 16:22:04 -06:00
Gregory Nutt
ee01445aa2 apps/nshlib: Fix an incorrect usage of a configuration variable in a previous commit. 2018-10-01 15:44:41 -06:00
Gregory Nutt
23b32baf98 apps/nshlib: Update README.txt 2018-10-01 14:28:07 -06:00
Gregory Nutt
15da89649d Damn. Forgot to add a file before the last commit.. AGAIN. 2018-10-01 13:31:06 -06:00
Gregory Nutt
e9edfd064f apps/nshlib: Add support for NSH local variables if CONFIG_NSH_VARS are set. These are like environment variables but are local to NSH. The importance of this is that these variables are *not* inherited when NSH creates a new task. The new command 'export' was added. In this case, the NSH variable will be promoted to an environment variable and will then be inherited by any tasks executed by NSH. 2018-10-01 13:30:25 -06:00
Gregory Nutt
d376723ad2 Trivial typo fix 2018-09-30 11:16:10 -06:00
Gregory Nutt
14a262001d apps/nshlib: Add support for the 'env' command. 2018-09-30 10:55:23 -06:00
Gregory Nutt
4bbfdbb9fa nshlib/, examples/: Update to show newer file system object types returned by stat(). 2018-09-22 13:24:24 -06:00
Eunbong Song
2985d3f42b apps/nshlib: Correct maximum number of arguments that can be provided to the mksmartfs command. 2018-09-18 07:24:24 -06:00
Gregory Nutt
42e99d59ce Correct some network-related configuration variable names. All *_MTU defines were changes to *_PKTSIZE gut that was not reflected in apps/ 2018-09-14 07:06:06 -06:00
Gregory Nutt
c5edf40542 apps/examples/udpblaster: Add option to use poll() on output (only). Also picks up some fixes to various typographical errors. 2018-09-14 06:59:23 -06:00
anchao
b5cfd93444 apps/: Modification to build system: Unified application compilation rules 2018-09-03 09:29:56 -06:00
Gregory Nutt
3e396d8e4e apps/nshlib: Fix a copy paste error introduced in commit 9a42be5e9b 2018-09-02 15:33:22 -06:00
Gregory Nutt
9a42be5e9b apps/nshlib: When using waitpid() to wait for a built-in application or a file application to exit. Add the WUNTRACED options to so the the waitpid() call will also be awakened if the waited-for task is stopped as well. 2018-09-02 14:19:30 -06:00
Juha Niskanen
cef306e335 apps/nshlib/nsh_console.c: Do not dereference NULL 'pstate' 2018-08-29 06:18:30 -06:00
Gregory Nutt
c4512f5ddf apps/nshlib: Fix problem in last commit. CONFIG_BOARDCTL_FINALINIT=y is an insufficient condition for calling boardctl(BOARDIOC_FINALINIT, 0). Also need CONFIG_NSH_ARCHINIT=y. 2018-08-28 15:48:51 -06:00
ligd
93f1c13b62 apps/: Call BOARDIOC_FINALINIT after start-up script (or immediately after BOARIOC_INIT is there is no start-up script). 2018-08-28 15:44:03 -06:00
Gregory Nutt
bb4c5c49ef Replace usage of SIGKILL with SIGINIT 2018-08-28 12:02:26 -06:00
anchao
3c2396116d apps/nshlib/Kconfig: Move 'option modules' from NSH_FILE_APPS to BUILD_LOADABLE 2018-08-27 07:04:29 -06:00
ligd
d36e1c87fe apps/nshlib: Add control-C support for terminating built-in and exec'ed file tasks. 2018-08-26 07:48:38 -06:00
anchao
220653f21c Squashed commit of the following: 
Author: anchao <anchao@pinecone.net>

     apps/, most main() function: Correct CONFIG_BUILD_LOADABLE usage
     Loadable apps/: Correct loadable symbol table generate
     apps/system/ubloxmodem:  Fix build break
     apps/examples/ostest: start restart/waitpid/user test from main loop
     apps/nshlib:  Expand reboot and poweroff commands to include a second, optional mode argument

    Author: Gregory Nutt <gnutt@nuttx.org>

     An attempt to fix build issues.  Does not work.
     apps/examples/ostest:  Fix some inappropriate renaming of static functions introduced with recent patches.
     apps/builtin/exec_builtin.c:  Fix a error introduced by recent comments.  Found in build testing.

    Author: anchao <anchao@pinecone.net>

     apps/builtin/exec_builtin.c:  Try posix_spawn if builtin apps do not have have an entry point.
     apps/Application.mk: introduce MODULE config to simplify tristate(m)
     apps/nsh:  Change the nuttx shell module type to tristate
     apps:  Add loadable application support
     script/mksymtab:  Generate symbol table name by default
     apps/builtin:  Allow loadable applications can register with apps/builtin.
 2018-08-23 11:06:15 -06:00
Xiang Xiao
dbf152cbeb apps/nshlib: (1) NSH prompt string is now configurable. nsh> is still the default. (2) Increase the default configuration for the maximum number of command line arguments to 7 (CONFIG_NSH_MAXARGUMENTS). This is needed for 'mount' with the -o option. 2018-08-23 07:34:30 -06:00
Xiang Xiao
8116d10da3 apps/fsutils/mksmartfs: Add a check to see if the SmartFS is already formatted. apps/nshlib: Add a force flag (-f) to mksmartfs. SmartFS will be formatted only if (1) the FLASH does not already hold a SmartFS, or (2) the force flag is set 2018-08-23 07:14:30 -06:00
ligd
bee98898f0 apps/nshlib: Expand reboot and poweroff commands to include a second, optional mode argument 2018-08-23 06:21:47 -06:00
Gregory Nutt
2f982e9c77 Revert "Squashed commit of the following:" 
This reverts commit 25b92edd9f.
 2018-08-22 12:06:32 -06:00
anchao
25b92edd9f Squashed commit of the following: 
apps/builtin/exec_builtin.c:  Try posix_spawn if builtin apps do not have have an entry point.
    apps/Application.mk: introduce MODULE config to simplify tristate(m)
    apps/nsh:  Change the nuttx shell module type to tristate
    apps:  Add loadable application support
    script/mksymtab:  Generate symbol table name by default
    apps/builtin:  Allow loadable applications can register with apps/builtin.
 2018-08-22 09:30:38 -06:00
Gregory Nutt
32f50985a6 Fix references to examples/nsh left in previous commit. 2018-08-18 09:33:25 -06:00
Gregory Nutt
a57610c2c4 Remove trailing spaces at the end of lines. 2018-08-13 07:47:26 -06:00
Gregory Nutt
f2ef84f048 apps/nshlib: Back out 516a743344. While the change is fuly functional and adds a pleasing symmetry to the control commands, it is also redundant and serves no real purpose other than requiring more FLASH. 2018-08-12 06:15:29 -06:00
Gregory Nutt
f759ad3196 Backs out most of commit 093391fcff. I was confused. I re-emplemented a feature that already existed. Silly me. 2018-08-11 10:47:46 -06:00
Gregory Nutt
a7f4a9db23 Revert "apps/nshlib/nsh_command.c: Update help text." 
This reverts commit 0511002543.
 2018-08-11 10:39:48 -06:00
Gregory Nutt
0511002543 apps/nshlib/nsh_command.c: Update help text. 2018-08-11 10:34:57 -06:00
Gregory Nutt
093391fcff apps/nshlib/nsh_test.c: The test command will now accept '!' inversion when used in the form: [ ! <expression> ]. 2018-08-11 10:20:03 -06:00
Gregory Nutt
ff192a4a58 apps/nshlib: I was able to cause an assertion with some typos in an testing the 'fi' command. Not an important thing, but this will protect against the assertion. 2018-08-11 09:30:53 -06:00
Gregory Nutt
5cfe9c2787 Update README file. 2018-08-11 08:21:52 -06:00
Gregory Nutt
516a743344 apps/nshlib: Extend Beat Küng's commit 888ad352eb so that inverted logic may also be used in repeat and while loops. 2018-08-11 07:53:22 -06:00
Beat Küng
888ad352eb Merged in bkueng/nuttx-apps (pull request #150) 
nsh: add inverted logic support in the form of 'if ! <cmd>'

Approved-by: GregoryN <gnutt@nuttx.org>
 2018-08-11 13:14:41 +00:00
Gregory Nutt
303629dbe4 apps/nshlib: Small parsing improvement plus some added comments. 2018-08-06 15:52:02 -06:00
Gregory Nutt
cb556d6236 apps/nshlib: Add parsing support for back-slash quoted characters. Currenlty only implemented properly if CONFIG_NSH_ARGCAT is also selected. This commit is in response to Bitbucket Issue 11 opened by Maciej Wójcik 2018-08-06 13:28:31 -06:00
Gregory Nutt
922283ee5d Squashed commit of the following: 
Merged in masayuki2009/nuttx.apps/loadable_app (pull request #148)

    loadable app support

    * apps: Introduce a build system for loadable apps for nsh.

        This PR consits of following changes. (NOTE: Changes to each
        application will be provided separately)

        apps/nshlib/Kconfig:
        Add 'option modules' to NSH_FILE_APPS so that a user can change
        an application configuration to tristate (y/n/m)

        apps/Make.defs:
        Override COMPILE and COMPILEXX macros to compile loadable apps.
        To make loadable apps, -DLOADABLE_APP is added to the flags.
        Also, introduce ELFLD to link a lodable app.
        Please note that the variable 'LOADABLE' must be defined in
        each application Makefile if you want to make a loadable app.

        apps/Application.mk:
        Add .build target in case of 'LOADABLE=y' which is used to
        link a final loadable application and install the app to
        apps/bin.

        apps/Makefile:
        Add SYMTABSRC and SYMTABOBJ variables for loadable apps which
        will be generated under the apps directory.
        Add make_symbols target which will be called when all applications
        are installed to generate symtab_app.c which is used for
        nsh to inform symbol information to the NuttX kernel.

        Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

    * apps/examples/hello: Apply changes to support a lodable app.

        Kconfig:
        Change the application state from bool to tristate

        Make.defs:
        Change the condition to build. By default, the application is
        not selected (i.e. 'n'), so if other states (i.e. y/m) are
        selected, the application will be compiled.

        Makefile:
        If the application is specified to 'm', the variable 'LOADABLE'
        must be defined here. Also note that other variables (PRIORITY
        and STACKSIZE) can only be used for built-in apps.

        hello_main.c
        Add LOADABLE_APP condition to main().

        Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

    * apps/examples/helloxx: Apply changes to support a lodable app.

        Kconfig:
        Change the application state from bool to tristate

        Make.defs:
        Change the condition to build. By default, the application is
        not selected (i.e. 'n'), so if other states (i.e. y/m) are
        selected, the application will be compiled.

        Makefile:
        If the application is specified to 'm', the variable 'LOADABLE'
        must be defined here. Also note that other variables (PRIORITY
        and STACKSIZE) can only be used for built-in apps.

        helloxx_main.c
        Add LOADABLE_APP condition to main().

        Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

    Approved-by: GregoryN <gnutt@nuttx.org>
 2018-08-03 12:05:01 -06:00
Gregory Nutt
3403b1b0e9 apps/nshlib/README.txt: Clarify arguments to the mkrd command. 2018-06-22 11:35:44 -06:00
Gregory Nutt
36d6348368 apps/nslib: Try to eliminate and uninitialized variable warning. 2018-06-17 15:37:42 -06:00
Beat Küng
c6697c150d Merged in bkueng/nuttx-apps (pull request #138) 
nsh_parse.c: fix 'while' and 'until' loop condition

The loop condition logic was inverted:
  while true; do echo "test"; done
would exit immediately, while using 'until' would stay in the loop.
This is the opposite of how it is supposed to work.
The reason is that 'state' was set wrong because 'whilematch' is a bool.

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2018-06-06 12:50:41 +00:00
Boris Astardzhiev
940b7f8a3e apps/nshlib/nsh.h: Fix typo.. #undef not #undefine. 2018-05-14 07:24:46 -06:00
Boris Astardzhiev
2c2fc512d6 nshlib/nsh_fscmds.c: Add the -r option which can be used to specify the number of entries in the FAT12/FAT16 root directory. 2018-05-11 09:50:54 -06:00
Juha Niskanen
052a7009b3 Merged in juniskane/apps_upstream/echo_fix_pr (pull request #135) 
apps/nshlib: Fix echo command with zero arguments, broken after commit 8ecf618

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2018-04-19 04:12:51 +00:00
Juha Niskanen
c4ca133b6f apps/nshlib: Remove non-existent CONFIG_NSH_TMPDIR from README.txt 2018-04-17 05:54:00 -06:00
Gregory Nutt
0094b411da apps/netutils/netlib: Various fixes needed to get a clean netlib build with Bluetooth only. 2018-04-03 10:01:55 -06:00
Gregory Nutt
467a7980f0 apps/nshlib/: In netcommds.c, the UNUSED() macro may be applied to an undefined symbol when IPv6 is enabled but IPv4 is not. 2018-03-31 09:27:52 -06:00
Gregory Nutt
bb6877ed78 apps/nshlib: Fix compile error when CONFIG_NSH_DISABLESCRIPT is not defined. The field np_flags does not exist if scripting is disabled. 2018-01-22 08:32:40 -06:00
Gregory Nutt
e2e53117a5 Remove some section headers when the sections are empty. 2018-01-13 08:35:44 -06:00
Gregory Nutt
661718ee19 apps/nshlib: Add irqinfo command. 2018-01-12 17:58:44 -06:00
Gregory Nutt
d96c236b31 Revert "apps/nshlib: restore space delimiter that was removed in last change to the NSH echo command." 
This reverts commit 7cdf9b07d8.
 2018-01-10 07:53:03 -06:00
Gregory Nutt
7cdf9b07d8 apps/nshlib: restore space delimiter that was removed in last change to the NSH echo command. 2018-01-10 07:46:24 -06:00
Gregory Nutt
99512b90db apps/nshlib: truncate command will now use ftruncate (vs. truncate) if it had to create the file with creat(). 2018-01-10 07:26:21 -06:00
Masayuki Ishikawa
8ecf618a4d apps/nshlib: Add support for '-n' option to the echo command. 2018-01-10 07:26:20 -06:00
Masayuki Ishikawa
bd6bf35ffd nshlib/nsh_telnetd.c: Add support for telnet character mode. 
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
 2018-01-10 07:15:16 +09:00
Gregory Nutt
7a2aac8876 apps/nshlib: Add support for a truncate command. This will be used to test the new ftruncate file system support. 2018-01-04 12:52:17 -06:00
Gregory Nutt
626f41084b apps/nshlib: Correct error introduced to conditional compilation 2017-11-14 08:42:16 -06:00
Gregory Nutt
e37f4b7004 apps/nshlib: Big simplification of last change. /proc/kmm, umm, and progmem have been replaced with a single procfs file called /proc/meminfo. The NSH free command now degenerates to a simple dump of /proc/meminfo. 2017-11-13 13:35:04 -06:00
Gregory Nutt
0cda4cec15 apps/nshlib: The free commands no longer used mallinfo() to get the state of the use heap. Two reasons: That is not useful information in the kernel build. And (2) there are other memory resources of interest in other configurations such as the Kernel heap in PROTECTED and KERNEL builds, and the prog mem uses when FLASH is used to hold modifiable data. The free command has been extended to just dump the content of procfs entries and to include all of these other memory resources of the procfs entries are available. 2017-11-13 12:55:03 -06:00
Dmitriy Linikov
dea8d93f64 Merged in hardlulz/modem-3.0-nuttx-apps/fix-compile-nsh_routecmds (pull request #118) 
Fixed the compilation of nsh_routecmds.c, broken after commit 6b9d23c6aa

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-11-03 12:28:19 +00:00
Gregory Nutt
7556eb3814 nshlib/: Fix some botched conditional compilation. 2017-11-02 17:13:49 -06:00
DL
bf209bcf1d Fixed misprint in cmd_wget 2017-11-01 06:18:40 +03:00
Gregory Nutt
ef353ed632 Fix parsing of empty strings when CONFIG_NSH_CMDPARMS is not defined. Problem noted by Juha Niskanen. 2017-10-27 06:41:26 -06:00
Gregory Nutt
62f7838c5e nshlib: Tighten up some conditional logic 2017-10-26 16:07:42 -06:00
Gregory Nutt
40d9701ea0 nshlib: Remove a dangling function that is no longer used after last mount/df chagnes 2017-10-26 13:38:30 -06:00
Gregory Nutt
1f1d114901 Update some comments 2017-10-26 13:31:57 -06:00
Gregory Nutt
3788928cbf nshlib: df command no long uses the non-standard OS interface foreach_mountpoint(). No simply cats /proc/fs/blocks or /proc/fs/usage. 2017-10-26 13:28:37 -06:00
Gregory Nutt
20076688c2 nshlib: mount command no long uses the non-standard OS interface foreach_mountpoint(). No simply cats /proc/fs/mount when there are no arguments to the mount command. 2017-10-26 12:17:03 -06:00
Anthony Merlino
a8bf5718f5 apps/nshlib: ifconfig improvements 2017-10-24 17:26:17 -06:00
Gregory Nutt
749ea9e881 This commit removes the ping6 command from NSH and replaces it with the apps/system/ping6 built-in command. The NSH ping6 command had to be removed because it violated the portable POSIX OS interface. The apps/system/ping6 command uses the sem-standard IPPROTO_ICMP6 socket interface. 
Squashed commit of the following:

    apps/system ping and ping6:  Fix a backward test.
    apps/system/ping6: ping6 logic now builds without error.
    apps/system/ping and ping6:  Minor clean-up to configuration settings.
    apps/system/ping6:  Minor clean-up to be able to configure CONFIG_SYSTEM_PING6
    apps/nshlib:  Remove support for ping6 from NSH.
    apps/system/ping6:  Add IPPROTO_ICMPv6 ping6.  Initial commit is simply a clone of the IPPROTO_ICMP ping logic.
    Rename CONFIG_NET_ICMPv6_PING to CONFIG_NET_ICMPv6_SOCKET.
 2017-10-24 11:19:41 -06:00
Gregory Nutt
bccf0092a4 nshlib: Remove some dangling IPv4 ping logic. system/ping: Add DNS hostname support. 2017-10-23 09:59:03 -06:00
Gregory Nutt
ed9dd1db53 Update a README.txt file 2017-10-23 09:22:42 -06:00
Gregory Nutt
c1ec7db8a9 This commite eliminates the ping command from NSH and replaces it with a ping 'built-in' at apps/system/ping. The original NSH version of ping violated the portable POSIX interface and, hence, had to be removed. The new system/ping command uses the new IPPROTO_ICMP AF_INET datagram sockets to implement ping. 
Squashed commit of the following:

    apps/system/ping:  Fix some timing issues.
    apps/system/ping:  A few timing related corrections.
    apps/nshlib:  Remove support for the NSH 'ping' command.  The implementation of that command violated the portable POSIX interface and has been replaced with a ping 'built-in' command at apps/system/ping.
    apps/system/ping:  Add larger payload.  Verify content of echoed payload.
    apps/system/ping:  Various fixes for a clean compile
    system/ping: Add new build structure for system ping command.
 2017-10-23 08:50:01 -06:00
Gregory Nutt
35ec1b9244 Squashed commit of the following: 
apps/fsutils/mkfatfs:  New user-space fatfs appears to work fine.
    apps/fsutils/mkfatfs:  Move mkfatfs from the OS to here.  Not fully integrated on the intial commit.
 2017-10-20 12:35:19 -06:00
Gregory Nutt
976ce0550c NSH: eliminate a warning 2017-09-27 12:05:19 -06:00
Masayuki Ishikawa
4822878990 nshlib/nsh_netcmds.c: Fix a compilation error when IPv4/IPv6 dual stack is enabled 2017-09-26 11:28:40 +09:00
Bruno Herrera
3fe720d1e2 Fixes for problems found by Coverity in the apps/ repository: 
nshlib/nsh_parse.c: Avoid truncating the strcmp result into a unsigned char variable.

    nshlib/nsh_netcmds.c: Check for valid hostip before using it.

    nshlib/nsh_ddcmd.c: Fix resouce leak when 'if=' or 'of=' params are repeated in the command line.  For example:

       dd if=/dev/null if=/dev/zero of=/dev/null or
       dd if=/dev/zero of=/dev/zero of=/dev/null
 2017-09-25 07:34:34 -06:00
Gregory Nutt
cdf0528933 examples/dac: Lets use printf instead of _info in application code. 2017-09-01 07:39:39 -06:00
Gregory Nutt
3367bde8fe NSH: Add conditions so that ifconfig and ifup will not be disabled if we are using only PF_IEEE802154 2017-08-21 09:32:07 -06:00
Gregory Nutt
41ce937ed0 Changes to netlib and nsh so that you build build with PF_IEEE802154 enabled and 6LoWPAN disabled. 2017-08-20 09:09:47 -06:00
Gregory Nutt
767b29335c Eliminate some warnings found in build testing. 2017-08-13 12:25:22 -06:00
Gregory Nutt
7a8561728c The last change added .PRECIOUS: $(BIN) to everyway Makefile in hopes the libapps.a will not be deleted on Control-C (unproven so far). However, $(BIN) may contain back slashes in some build platforms and that causes problems for make: It can't handle the backslashes in the .PRECIOUS dependency list. $(BIN) replaced with ../../libapp.a, where the number of ../ depends on the depth of the Makefile in the apps/ source tree. 2017-08-13 11:03:17 -06:00
Gregory Nutt
a66da34f18 All Makefiles: Add .PRECIOUS: apps/libapps.a to every Makefile. Hopefully this will end awkward problems when you Control-C out of a build and libapps.a is deleted. 2017-08-13 09:35:14 -06:00
Gregory Nutt
970e98a902 Additional changes associated with last commit. 2017-08-12 12:11:22 -06:00
Gregory Nutt
90ebda9120 Eliminate another warning about an unused function 2017-08-12 12:09:01 -06:00
Gregory Nutt
1cdf4ad8d1 Fix a warning found in build testing 2017-08-12 11:14:30 -06:00
Gregory Nutt
7a7c7ee93a Update README and fix some conditional compilation from the last commit. 2017-08-11 15:56:53 -06:00
Gregory Nutt
5dcf5620e3 NSH Library: Add a route command that will dump the content of routing table. 2017-08-11 15:33:26 -06:00
Gregory Nutt
1e23b30afe more issues with last change: netmask must be in network order. 2017-08-10 16:08:09 -06:00
Gregory Nutt
654d526a69 NSH addroute/delroute: Fix an indexing problem introduced with previous commit. 2017-08-10 11:40:12 -06:00
Gregory Nutt
52e4da1e41 NSH addroute and delroute: All expression of the netmask in IPv4 CIDR or IPv6 slash notation. This really reduces the pain of using the commands, especially for IPv6. 2017-08-10 10:30:20 -06:00
Gregory Nutt
f58768db3d NSH library: Update addroute and delroute command. The would support either IPv4 or IPv6, but not both. 2017-08-10 09:15:44 -06:00
Gregory Nutt
3b8c97747d netutils/netlib: Fix netlib_nodaddrconv() so that its return type is the same as other address conversion functions. NSH: Correct parsing of ifconfig so that you can specify the HW address without specifying the IP address. 2017-08-02 14:30:34 -06:00
Gregory Nutt
d6050d70a2 NSH library: Extend ifconfig command so that it can set variable length packet radio addresss. 2017-08-02 13:13:19 -06:00
Gregory Nutt
c343fc618e apps/netutils/netlib: Add support for PktRadio IOCTL commands. 2017-08-02 12:40:50 -06:00
Gregory Nutt
7d0037b08a NSH: Misc changes needed for PktRadio support. 2017-07-30 16:03:56 -06:00
Gregory Nutt
7441c5422f Socket I/F: Cleanup for good CONFIG_NET_PKT build. 2017-07-14 13:43:04 -06:00
Masayuki Ishikawa
ef04aeaead NSH library: Fix build break in nsh_command.c with IPv4/IPv6 dual stack. 2017-07-04 10:13:26 +09:00
Gregory Nutt
d81d9c419b Eliminat a warning when both Ethernet and 6LoWPAN are enabled; improve some naming. 2017-07-02 11:28:12 -06:00
Gregory Nutt
28415d662b netutils/telnetd and users of telnetd: Add support for IPv6. 2017-06-27 09:14:13 -06:00
Gregory Nutt
98204bad94 system/telnet: POLL must not be disabled in configuration. Telnet client port argument is no optional. 2017-06-27 07:46:16 -06:00
Gregory Nutt
9091716419 revise some of the state handling in the previous commit. 2017-06-26 18:16:05 -06:00
Gregory Nutt
342de81641 NSH library: Add a Telnetd command. This is needed when network initialization is deferred. In that case, telnet daemon cannot be started until the network is finally initialized. The telnetd command was added just for that case: So that the telnet daemon can be started from the NSH command line after the network is configured. 2017-06-26 18:00:13 -06:00
Gregory Nutt
d5a897fa1b Merge branch 'master' of bitbucket.org:nuttx/apps into ieee802154 2017-06-19 13:35:34 -06:00
Gregory Nutt
2f975e8f06 nshlib: fix size of 6LoWPAN extended address. 2017-06-19 09:47:17 -06:00
Oleg Evseev
f13d4125a4 Merged in lukegluke/apps (pull request #91) 
fix copy-paste typo in nsh_usbconsole.c

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-06-19 15:29:09 +00:00
Oleg Evseev
8ee1e79d03 fix copy-paste typo in nsh_usbconsole.c 2017-06-19 15:05:06 +00:00
Gregory Nutt
2bb14d854d L should be capitalized in 6LoWPAN 2017-06-18 16:02:11 -06:00
Gregory Nutt
2e4740e6bb i8sak: Missing newline in fprintf output 2017-06-18 11:28:36 -06:00
Gregory Nutt
9485744265 NSH network initialization: Do not set the IP address for 6loWPAN. The 6loWPAN stack uses IP address that derive from the ieee 802.15.4 addressing and cannot be (safely) configured by the user. 2017-06-17 11:31:04 -06:00
Gregory Nutt
22d9c69d87 NSH network configuration: Re-factor a function that has gotten too big and too complex. 2017-06-17 10:37:31 -06:00
Gregory Nutt
033b42789b NSH: Fix some ieee 802.15.4 initialization logic. It should not set the saddr or panid; those cannot be hard-coded but must come from the coordinator. 2017-06-17 10:04:18 -06:00
Masayuki Ishikawa
41dee001ad Merge branch 'master' into bug_fix_by_sony 2017-05-22 09:13:02 +09:00
Gregory Nutt
4e7b17d783 Fix some typos in comments. 2017-05-21 12:05:07 -06:00
Gregory Nutt
8c1446671c apps/nshlib: Add a new option CONFIG_NSH_NETLOCAL that will suppress some built in operations and will support manual configuration of a wireless network 2017-05-21 12:00:55 -06:00
Simon Piriou
523d7645c4 wapi: add basic wapi_event_stream_extract implementation 2017-05-21 16:24:49 +02:00
Nobutaka Toyoshima
3a8cfb6c04 nshlib: Fix a resource leak in cmd_hexdump() 
Jira: PDFW15IS-265
Coverity-ID: 10786
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
 2017-05-20 17:57:03 +09:00
Sebastien Lorquet
ea1025ead2 DHCPC: Remove hard-coded interface device. Now passed as a parameter to dhcpc_open(). 2017-05-19 15:31:22 -06:00
Sebastien Lorquet
297844b1ce Fix comments formatting 2017-05-19 17:50:26 +02:00
Sebastien Lorquet
aefddc3648 Second batch of changes (no problems) 2017-05-19 17:37:17 +02:00
Gregory Nutt
13911d9b17 Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they. 2017-05-11 13:40:03 -06:00
Gregory Nutt
1bad025c81 Cosmetic changes to comments 2017-05-11 07:46:08 -06:00
Gregory Nutt
5fbf2fd8d1 NSH wireless setup: Move call to nsh_associate(). It should be possible to associate with an AP when DHCPC is disabled. 2017-05-09 06:39:08 -06:00
Gregory Nutt
8380447e1a Merge remote-tracking branch 'origin/master' into ieee802154 2017-05-08 14:31:54 -06:00
Gregory Nutt
0376019c35 WPA associate: NSH was not setting the algorithm parameter. 2017-05-08 13:28:08 -06:00
Gregory Nutt
6ec8e56f89 Merge remote-tracking branch 'origin/master' into ieee802154 2017-05-06 11:30:48 -06:00
Gregory Nutt
40a1fbf498 Forgot to add a file in the last commit. 2017-05-06 11:28:56 -06:00
Gregory Nutt
a0915850b9 wireless/wapi: wpa_driver_wext_associate() now accepts a configuration parameter that can be used to specify the wireless properties. nshlib: NSH now has configuration options to select the wireless properties. It builds the configuration structure and passes this to wpa_driver_wext_associate() so that it will setwork the network as configured. 2017-05-06 11:28:11 -06:00
Gregory Nutt
44ace8e1cc 6loWPAN: Replace some Rime address naming with more consistent short/exended address terminology 2017-05-04 08:21:12 -06:00
Simon Piriou
33027bd66e wireless/wext: Add drivers_wext from the WPA supplicant; Integrate into NSH 2017-05-02 09:43:48 -06:00
Gregory Nutt
a5c439777d nshlib/nsh_netinit.c: If IEEE802.11 selected use wlan0 instead of eth0 for network device name. 2017-05-02 08:26:21 -06:00
Gregory Nutt
5b7f2b0ce2 Eliminate a warning 2017-04-29 08:52:10 -06:00
Gregory Nutt
08b2fee0fb NSH: Needs to include tftp.h if TFTP no disabled 2017-04-29 08:42:26 -06:00
Ian McAfee
8007332ab1 I need to look at the registers that are at or around 0xe000ef90. Using mw and xd, I see that nsh does not support pointers greater than 0x7fffffff. A quick look at the source shows that the pointers for those two commands are set with calls to strtol() rather than strtoul(). Changing the two pointer-setting instances to strtoul() fixes the problem, at least for my architecture/config. 2017-04-26 17:54:56 -06:00
Gregory Nutt
ad608c705c nshlib: nsh_netcmds.c should include netlib.h even if neither TCP nor UDP are enabled 2017-04-25 08:25:23 -06:00
Gregory Nutt
c2bdd49421 netlib and NSH: Add logic to set the IEEE802.15.4 PAN ID. 2017-04-19 18:10:39 -06:00
Masayuki Ishikawa
6b75120352 NSH library: Fix open flags in nsh_codeccmd.c 
Jira: PDFW15IS-2824
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
 2017-04-19 16:12:44 +09:00
Gregory Nutt
775d1052a5 NSH set command: Eliminate useless argc check of SCRIPTS are enabled but ENVIRONMENT is disabled 2017-04-09 12:03:18 -06:00
Gregory Nutt
169bcab331 NSH: Eliminate warning about unused variable. 2017-04-09 11:54:59 -06:00
Gregory Nutt
8369052a22 NSH library: Extend ifconfig to support 6loWPAN. Adapt to some changes in configuration variable usage. 2017-04-08 12:21:40 -06:00
Gregory Nutt
194c2d86a8 6loWPAN: Add network IOCTL support to set the node address 2017-04-06 16:00:41 -06:00
David Sidrane
35cf98d4df Print expanded variables if -x 2017-04-05 18:31:47 -06:00
David Sidrane
d03aa9112e Added support for set [{+|-}{e|x|xe|ex}] [<name> <value>] 
Set the 'exit on error control' and/or 'print a trace' of commands when parsing scripts in NSH.  The settinngs are in effect from the point of exection, until they are changed again, or in the case of the init script, the settings are returned to the default settings when it exits.

Included child scripts will run with the parents settings and changes made in the child script will effect the parent on return.

Use 'set -e' to enable and 'set +e' to disable (ignore) the exit condition on commands. The default is -e. Errors cause script to exit.

Use 'set -x' to enable and 'set +x' to disable (silence) printing a trace of the script commands as they are ececuted. The default is +x. No printing of a trace of script commands as they are executed.
 2017-04-05 18:25:59 -06:00
Gregory Nutt
eef0161dd4 examples/nettest: Trying to adapt to use for testing 6loWPAN. 2017-04-03 15:33:39 -06:00
Gregory Nutt
efa2de16a4 NSH: Fix some warnings about integer/pointer casts of different sizes (probably only effects 64-bit simulation) 2017-04-03 09:26:10 -06:00
Jussi Kivilinna
3e2743e826 nshlib: fix building when CONFIG_NET_USRSOCK enabled with other link-layer 2017-03-31 09:10:55 -06:00
Tomasz Wozniak
71b45ed2c2 built-in libc defect workaround: replace '%6.6u' format with an equivalent '%06u' 2017-03-21 09:39:51 +01:00
Gregory Nutt
2ef46ce4ba NSH library: In nsh_argexand(), if CONFIG_NSH_ARGCAT is defined but CONFIG_NSH_CMDPARMS defined and/or CONFIG_DISABLE_ENVIRON not defined, then there is a situation that causes an infinite loop in the parser. Noted by Freddie Chopin. 2017-03-09 08:07:22 -06:00
Alan Carvalho de Assis
8e7ed15cce NSHLIB uname command: Eliminate 'defined but not used' warning in some configurations 2017-03-07 15:36:18 -06:00
Alan Carvalho de Assis
d506939b59 NSHLIB ps command: Eliminate 'defined but not used' warning in some configurations 2017-03-07 15:10:17 -06:00
Gregory Nutt
a7e34f3b97 Make use of FAR storage class consistent 2017-02-27 07:54:21 -06:00
Gregory Nutt
fa4b047d35 Fix typo in last commit 2017-02-27 07:49:49 -06:00
Gregory Nutt
590791e12d NSH: Eliminate a warning when all memory inspection commands are disabled. 2017-02-27 07:30:52 -06:00
Gregory Nutt
bab5df0966 Eliminate a warning about an unused variable. 2017-02-27 07:30:52 -06:00
Gregory Nutt
81645fe18f strcasecmp, strncasecmp, bzero, bcmp, and bcopy should be defined in strings.h, not string.h. bzero, bcmp, and bcopy are legacy functions; the contemporary counterparts should be used instead. 2017-02-16 15:58:15 -06:00
Gregory Nutt
740b528199 apps/examples/stat: Add a simple test for stat(), fstat(), and statfs(). 2017-02-13 14:08:19 -06:00
Gregory Nutt
bf9ca8868e NSH: Both arguments of 'ln' command may be relative paths 2017-02-07 07:56:54 -06:00
Gregory Nutt
1a696b0367 Fix a memory leak in the 'ln' command when a failure occurs. 2017-02-06 10:20:29 -06:00
Gregory Nutt
7a0e08c37b NSH: Add readlink command. 2017-02-05 10:35:11 -06:00
Gregory Nutt
bb81a3d11d NSH ls command: if node is a symobolic link, use readlink() to get and the display the target of the symblic link. 2017-02-03 14:13:25 -06:00
Gregory Nutt
9fbca32710 Soft links: Fixed logic in RTOS. Remove NSH kludge of last commit. 2017-02-03 13:23:27 -06:00
Gregory Nutt
51f71304d1 NSH: Extend ls command to show type of symbolic link. 2017-02-03 11:21:37 -06:00
Gregory Nutt
2ac55ec4e7 NSH: Add support for the 'ln' command. 2017-02-02 19:40:59 -06:00
Gregory Nutt
d195751a90 Update NSH and examples/modules for changes in kernel module interface. 2017-01-22 15:11:49 -06:00
Masayuki Ishikawa
4bf85f7c7b NSH: dd command will show statistics 2016-12-19 18:33:34 -06:00
Gregory Nutt
9b951b4dd8 apps/nshlib: nsh_getdirpath(), use snprint instead of sprintf to avoid possibility of buffer overrun. Noted by Chung Hwan Kim. 2016-10-11 17:35:31 -06:00
Gregory Nutt
2c8ac4440a apps/nshlib: Don't try to flush output streams if stdio buffered I/O is not supported. 2016-10-06 08:36:15 -06:00
Alan Carvalho de Assis
cdedb412ed apps/nshlib: Add printf command to NSH, e.g., controlling /dev/userleds from command line: nsh> printf \x01 > /dev/userleds 2016-10-01 07:44:15 -06:00
Neil Hancock
7fc401d3c1 Correct an assertion 2016-09-12 07:26:37 -06:00
Aleksandr Vyhovanec
e832e73b99 nshlib/: Fix missing semicolon; include string.h. 2016-09-05 07:05:17 -06:00
Gregory Nutt
8cfa1dbd3b The previous commit was reverted. My concern was misplaced: There is a guard boolean to prevent running the init script more than once. This comment just restores some of the good cosmetic changes that were included in the reverted commit. 2016-08-25 14:28:25 -06:00
Gregory Nutt
4eda22b4db Revert "This commit adds nsh_consolechild(). I noticed that there are several examples that call nsh_consolemain.c to create to create a new NSH session. That will not always work because nsh_consolemain() performs the one-time initialization needed by the NSH library: Mounting, reading, and running the start-up script, configuring USB tracing. Some of those actions will cause failures if attempted twice." 
This reverts commit 4d364d836a.
 2016-08-25 14:19:36 -06:00
Gregory Nutt
4d364d836a This commit adds nsh_consolechild(). I noticed that there are several examples that call nsh_consolemain.c to create to create a new NSH session. That will not always work because nsh_consolemain() performs the one-time initialization needed by the NSH library: Mounting, reading, and running the start-up script, configuring USB tracing. Some of those actions will cause failures if attempted twice. 
Here are some offenders: examples/cc3000/shell.c, examples/nsh/nsh_main.c, examples/nxterm/nxterm_main.c, and examples/pty_test/pty_test.c.  It is possible that for some of those, that represents the first call to nsh_consolemain().  But probably not.

To give other initialization options, I added nsh_consolechild() which is identical to nsh_consolemain() other than it omits all of the one-time initialization.  Of course, you would not get the result that you wanted if nsh_consolechild() were called without nsh_consolemain().
 2016-08-25 14:14:23 -06:00
Gregory Nutt
e39cfc97c7 Add logic to support an NSH-specific system command 2016-08-25 11:34:36 -06:00
Mateusz Szafoni
6ff8074532 apps/nshlib/nsh_syscmds.c: missing semicolon 2016-08-25 14:26:33 +02:00
Gregory Nutt
c9378ef87e Fix hex representation of IP address. Also noted by Michał Łyszczek 2016-08-19 06:35:29 -06:00
Gregory Nutt
b9d56991f3 Update some comments. Remove trailing whitespace noted by Michał Łyszczek 2016-08-19 06:25:42 -06:00
Gregory Nutt
823b8c3981 FIFO_SIZE vs PIPE_SIZE 2016-08-04 16:25:47 -06:00
Gregory Nutt
fff8a91e52 Oops, wrong kind of comments 2016-08-04 13:32:19 -06:00
Gregory Nutt
e4914622b3 NSH: cmd_mkfifo depend son CONFIG_DEV_PIPE_SIZE > 0 2016-08-04 12:57:02 -06:00
Gregory Nutt
d5b7268d95 ramdisk.h moved from include/fs/nuttx/ to include/nuttx/drivers. 2016-07-20 14:02:41 -06:00
Gregory Nutt
7d517413cb Things that use mkfifo() and pipe() depend on CONFIG_PIPES 2016-07-20 10:46:05 -06:00
Gregory Nutt
b1230ce87a NSH: Eliminate a warning about discarding const 2016-07-15 08:31:47 -06:00
David Alessio
f48b3c73b0 When Priority Inheritance is enabled, the format of /proc/<PID>/status changes to show both the current priority and the thread’s base priority. This messes up the format of cmd_ps. 
The attached patch fixes cmd_ps to ignore the base priority.
 2016-07-15 07:01:02 -06:00
Gregory Nutt
dd7c4c9493 NSH library: Don't show stack usage is CONFIG_STACK_COLORATION is not enabled. 2016-07-13 07:06:32 -06:00
David Alessio
1d8ef23b88 Use fixed point math for cmd_ps removing dependency on floating point libs. 2016-07-12 06:48:30 -06:00
Sebastien Lorquet
2cbad44f1d This is the Pokemon patch to change all includes fronm <apps/bla/bla.h> to "bla/bla.h" 2016-07-11 10:11:18 -06:00
David Alessio
63ff107419 Fix a typo a a preceding change. 2016-07-11 06:56:34 -06:00
David Alessio
f553fd1316 Recent enhancements to cmd_ps trips a floating point exception if LIBC_FLOATINGPOINT is not defined (at least on Cortex M4 w/ hardfloat). I’m using a buildroot gcc configured to support Cortex-M4F and the hard float ABI, target files are compiles with: -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard. I’m not sure the best way to address this, but the attached patch file is the first that comes to mind. Note, I added the float qualifier ‘F’ after a few constants to prevent the compiler from promoting the multiplication and division to double (expensive on M4F) then demoting to single float for the store. (sorry, it’s one of my many pet peeves ;) 
`
 2016-07-10 17:49:58 -06:00
David Sidrane
6eab2b7811 Take 2 2016-07-01 09:45:00 -10:00
Gregory Nutt
97e41cdcc5 Add a missing blank line 2016-07-01 13:27:15 -06:00
Gregory Nutt
57a0f88728 Revert "Review of last PR" 
This reverts commit 0e4c247e1d.
 2016-07-01 13:26:34 -06:00
Gregory Nutt
0e4c247e1d Review of last PR 2016-07-01 13:22:36 -06:00
David Sidrane
cbe1d33786 Allow stack usage to be disabled on contrained systems 2016-07-01 08:59:46 -10:00
Gregory Nutt
f48a813e0e Move apps/include/builtin.h to apps/include/builtin/builtin.h 2016-07-01 07:08:03 -06:00
Gregory Nutt
0e76ca7474 Move apps/include/nsh.h to apps/include/nshlib/nshlib.h 2016-07-01 06:59:23 -06:00
Gregory Nutt
cd741c82cf apps/include: Move all header files associated with modules in apps/system to apps/include/system 2016-07-01 06:48:22 -06:00
Gregory Nutt
8a03660c72 Remove apps/system/usbmonitor. It has been moved to nuttx/drivers/usbmonitor. 2016-06-30 13:13:05 -06:00
Frank Benkert
65e050dbfb NSH: PS-Command: print out the stack usage if stack coloration is enabled. 2016-06-30 07:28:42 -06:00
Gregory Nutt
0559581b91 Trivial changes after review of PR 2016-06-27 11:36:34 -06:00
Mateusz Szafoni
d93e8e5c17 Remove references to CONFIG_SYSLOG 2016-06-27 18:39:55 +02:00
Gregory Nutt
a2a9e20c65 Move NSH stuff out of nuttx/configs/Kconfig to here. Why was it in the NuttX tree. 2016-06-24 07:47:03 -06:00
Gregory Nutt
fa4cd10d33 Trivial modification of debug statement 2016-06-23 08:05:06 -06:00
Gregory Nutt
bb06f7368f Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info(). 2016-06-20 11:48:15 -06:00
Gregory Nutt
5098539063 Add _ to front of remaining debug macros 2016-06-16 12:12:34 -06:00
Gregory Nutt
cc03ecefc8 Rename err() to _err() 2016-06-16 11:44:22 -06:00
Gregory Nutt
65899c99e6 apps/nshlib: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition. 2016-06-14 14:18:07 -06:00
Gregory Nutt
586b0aa7e0 Change names of *dbg() * *err() 2016-06-11 15:51:27 -06:00
Gregory Nutt
f4bae25e32 Rename *lldbg to *llerr 2016-06-11 14:55:13 -06:00
Gregory Nutt
468bdcf8e6 Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES 2016-06-11 14:13:39 -06:00
Gregory Nutt
344c92e2a4 Replace all occurrences of vdbg with vinfo 2016-06-11 11:55:38 -06:00
Gregory Nutt
56e75e9db8 Rename CONFIG_DEBUG_VERBOSE to CONFIG_DEBUG_INFO 2016-06-11 11:50:38 -06:00
Sebastien Lorquet
d2aa24ad88 Make sure that APPNAME is defined in all Makefiles that generate applications 2016-06-09 10:51:04 -06:00
Gregory Nutt
a9d57ca022 Merged in marten_svanfeldt/nuttx-apps-public/for_upstream/nsh_netinit (pull request #43) 
Make NSH net-initialization be a configuration option
 2016-06-09 09:25:27 -06:00
David S. Alessio
bfd5ca7cd2 NTP Client: All retries; Add initialization in NSH network startup logic. 2016-06-09 08:18:49 -06:00
Gregory Nutt
7a5ceb244e Fix error in comment 2016-06-09 08:13:42 -06:00
Marten Svanfeldt
33c6a6bb75 Make NSH net-initialization be a configuration option 
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
 2016-06-09 05:29:01 +02:00
Sebastien Lorquet
bfff5e7179 Add empty preconfig rules to 'leaf' makefiles 2016-06-02 16:24:30 +02:00
Gregory Nutt
0943afd2f9 Kconfig files: All USB-related options depend on CONFIG_LIB_BOARDCTRL and now set CONFIG_BOARDCTL_USBDEVCTL=y 2016-03-26 07:13:57 -06:00
Gregory Nutt
6951366eca Replace all calls to the OS internal usbdev_serialinitialize with proper calls to boardctl() 2016-03-25 16:00:28 -06:00
Gregory Nutt
a31300cb05 Replace calls to OS internal cdcacm_*, usbmsc_*, and composite_* with boardctl() calls 2016-03-25 13:26:00 -06:00
Gregory Nutt
c6ac4d2581 NSH: ps command will show CPU if SMP is enabled 2016-02-19 15:33:32 -06:00
Gregory Nutt
d5c3bae6cd apps/: Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section() 2016-02-14 15:15:37 -06:00
Gregory Nutt
5642e02f77 Fix some incorrect usage of INADDR_ANY 2016-02-09 11:24:30 -06:00
Gregory Nutt
b54aa2b081 NSH: Improve an error message 2016-02-08 16:29:54 -06:00
Gregory Nutt
3df8b716dc Remove some redundant logic 2016-02-08 16:19:21 -06:00
Gregory Nutt
1482732f18 NetLib: Move functions in netlib.c to separate files; improve some naming 2016-02-08 16:09:24 -06:00
Gregory Nutt
b8c8bea22c Add an 'arp' command to NSH to support access to the OS ARP table 2016-02-08 14:49:05 -06:00
Gregory Nutt
c8e21ddcd6 Costmetic changes to comments and spacing. 2016-02-06 11:34:39 -06:00
Gregory Nutt
0720f9a357 NSH: Add option to use platform-specific logic to verify login credentials; Add option to add a delay after each failed login attempt 2016-01-22 10:46:19 -06:00
Gregory Nutt
6febdc60c1 Update to use 64-bit timer when available 2016-01-21 12:03:04 -06:00
Gregory Nutt
07cf99130c nsh_stdsession() cannot use the same login logic as nsh_session(); Also put telnet login in a separate file for symmetry 2016-01-20 15:22:02 -06:00
Gregory Nutt
93d9d5e4ca apps/nshlib: All NSH sessions may now be protected with passwords stored in the encrypted /etc/passwd file 2016-01-20 14:42:39 -06:00
Gregory Nutt
681bfa2605 NSH: Add logic for the case where the passwd file is read-only. ROMFS image needs to be marked as const, or it will end up in RAM. 2016-01-20 13:05:25 -06:00
Gregory Nutt
3dad8a29a2 NSH now supports an MOTD string that will be presented after the greeting 2016-01-20 11:18:08 -06:00
Gregory Nutt
fe05a8444f apps/nshlib: Add useradd, userdel, and passwd commends 2016-01-20 09:37:25 -06:00
Gregory Nutt
7f5a7a07a5 Costmetic alignment 2016-01-17 08:12:51 -06:00
Gregory Nutt
b5c5055c41 NSH: Remove partial implementation of the use of IOBJ/IPTR in NSH. There are some complications 2016-01-17 07:53:52 -06:00
Gregory Nutt
16ed293417 Revert "Revert "NSH: All nsh_output strings tagged with IOBJ so that they may be stored in FLASH on AVR"" 
This reverts commit fd083ee981.
 2016-01-17 07:41:51 -06:00
Gregory Nutt
a5fbb4cd24 Revert "NSHL: Format strings for nsh_output should all have IOBJ qualifier" 
This reverts commit 186a101d2c.
 2016-01-17 07:39:33 -06:00
Gregory Nutt
fd083ee981 Revert "NSH: All nsh_output strings tagged with IOBJ so that they may be stored in FLASH on AVR" 
This reverts commit cb6a914d08.
 2016-01-17 07:39:17 -06:00
Gregory Nutt
691bd07f2e NSH library: Costmetic change 2016-01-17 07:29:50 -06:00
Stefan Kolb
3b820bbc78 NSH: Correct an error in conditional compilation 2016-01-13 06:53:33 -06:00
Gregory Nutt
c13b9e6a51 Fix compile error in time command when certain features are disabled 2016-01-08 11:23:45 -06:00
Gregory Nutt
50f44f23f2 Fix an error in last commit; eliminate a warning 2016-01-06 10:14:09 -06:00
Gregory Nutt
186a101d2c NSHL: Format strings for nsh_output should all have IOBJ qualifier 2016-01-06 08:31:56 -06:00
Gregory Nutt
cb6a914d08 NSH: All nsh_output strings tagged with IOBJ so that they may be stored in FLASH on AVR 2016-01-05 16:38:50 -06:00
Gregory Nutt
611bd4684f Update some comments 2016-01-04 12:36:38 -06:00
Gregory Nutt
d5df336821 Trivial update to README 2016-01-01 12:16:19 -06:00
Gregory Nutt
31629ee982 Update README 2016-01-01 09:09:34 -06:00
Gregory Nutt
949b4bd520 Correct a statement in the description of the time command 2015-12-31 10:23:11 -06:00
Gregory Nutt
6c89c01cf5 Fix a scaling error in the new time command 2015-12-31 10:03:04 -06:00
Gregory Nutt
3b3b8faf68 Trivial update to README 2015-12-31 09:19:19 -06:00
Gregory Nutt
f09b7e400f NSH: Add a time command that can be used to time other commands 2015-12-31 09:16:38 -06:00
Gregory Nutt
15201642b3 Minor adjustment of spacing 2015-12-13 10:39:13 -06:00
Gregory Nutt
a620f99306 Update README; trivial changes to lsmod output format 2015-12-13 10:30:47 -06:00
Gregory Nutt
f0a21d3d48 NSH: Add module commands: insmod, rmmod, and lsmod 2015-12-13 09:55:52 -06:00
Gregory Nutt
652853c7d1 NSH DD command: Use nsh_freefullpath() instead of free(). Actually, these are the so this does not fix bug. It is just needed for symmetry. 2015-12-02 14:10:50 -06:00
Gregory Nutt
aa35ebb6b6 Correct a typo in CONFIG_NSH_IPADDR help text. 2015-12-02 16:17:50 +00:00
Gregory Nutt
eb1360d56e NSH: Add group ID or parent PID to ps command output (if available) 2015-11-30 08:05:34 -06:00
Gregory Nutt
997ba578e4 Default value for LOSMART support should be disabled if MTD_SMART is not selected 2015-11-29 07:20:09 -06:00
Gregory Nutt
cee429beac Update NSH README. Update ps examples 2015-11-28 17:52:25 -06:00
Gregory Nutt
793f445f54 Update README 2015-11-28 17:28:54 -06:00
Gregory Nutt
7e7dd916ce apps/nshlib: The 'ps' command now uses /proc/(pid)/ to obtain task status information. A consequence of this is that you cannot use the 'ps' command if the procfs is not enabled and mounted at /proc. 2015-11-28 15:03:21 -06:00
Gregory Nutt
082b452016 Move string trimming logic in nsh_fsutils.c as nsh_trimspaces() 2015-11-28 15:01:00 -06:00
Gregory Nutt
64c7e31896 nshlib: Correct an error message 2015-11-28 11:57:37 -06:00
Gregory Nutt
88d3ac1c92 apps/nshlib: nsh_readfile() should not be marked as static 2015-11-28 11:39:50 -06:00
Gregory Nutt
631c9cec12 apps/nshlib: The I/O buffer, g_iobuffer, should not be a global buffer. That will not work in an environment where there are multiple NSH sessions. The I/O buffer must, instead, be a part part of the session-specific data defined in nsh_console.h # Please enter the commit message for your changes. Lines starting # with '#' will be ignored, and an empty message aborts the commit. 2015-11-28 11:13:47 -06:00
Ken Pettit
d82b8a2e23 apps/nshlib: Add a new NSH losmart command. losmart setups up a loop device for the smart MTD driver similar to losetup but with different syntax. From Ket Petit. 2015-11-28 09:05:05 -06:00
Gregory Nutt
92b1eb36c8 nshlib: Move trim_dir() and foreach_direntry() from nsh_fscmds.c to nsh_fsutils.c as nsh_trimdir() and nsh_foreach_direntry(), respectively 2015-11-28 08:29:27 -06:00
Gregory Nutt
510f325ae4 nshlib: Use CONFIG_NSH_PROC_MOUNTPOINT instead of literal /proc; Move readfile() from nsh_proccmds.c to nsh_fsutils.c as nsh_readfile() 2015-11-28 07:23:08 -06:00
Gregory Nutt
fdb4ee7f48 Update README 2015-11-27 17:54:20 -06:00
Gregory Nutt
0fb32570ff apps/nshlib: Remove all references to internal OS interface netdev_foreach(). Logic in ifconfig, ifup, and ifown now use the procfs file system to examine networking status. 2015-11-27 17:47:09 -06:00
Gregory Nutt
bb88ff9b12 nshlib/: ifconfig now uses /proc/net/eth0 to display network configuration. You will need to enable the procfs file system in order to use ifconfig 2015-11-27 16:57:22 -06:00
Gregory Nutt
6c6df5e4ed Remove some ifdef'ed out logic 2015-11-27 13:54:04 -06:00
Gregory Nutt
ee7df4a0ab Remove carriage returns from a new file 2015-11-27 13:05:02 -06:00
Gregory Nutt
32b992971b apps/nshlib: The 'ifconfig' command now uses /proc/net/stat to show network statistics. A consequence of this is that you cannot view network statistics if the procfs is not enabled and mounted at /proc 2015-11-27 13:04:11 -06:00
Gregory Nutt
0c03c1e840 NSH ls command should strip any trailing '/' characters from paths 2015-11-27 12:28:46 -06:00
Gregory Nutt
f48d95e941 Use lower case labels in ifconfig driver statistics to better match other labels 2015-11-27 07:36:49 -06:00
Gregory Nutt
981e74b810 If CONFIG_NETDEV_STATISTICS=y, then ifconfig will now print network driver statistics 2015-11-26 14:43:34 -06:00
Gregory Nutt
d3e08fa378 Eliminate some warnings in certain tiny configurations 2015-11-26 12:33:16 -06:00
Gregory Nutt
1150be4a7c Update README 2015-11-25 18:35:23 -06:00
Gregory Nutt
a62bf6727f NSH no long calls losetup() and loteardown() directly. Now it uses /dev/loop and performs these operations using ioctl() calls 2015-11-25 17:55:16 -06:00
Gregory Nutt
882ae41aee If CONFIG_LIBC_LOCALTIME or CONFIG_TIME_EXTENDED are defined, then the NSH date command should also show the day ofo the week 2015-11-25 12:52:36 -06:00
Ken Pettit
b34bfb02e1 NSH: Extend mount command to include mount options argument. From Ken Petit 2015-11-25 08:49:29 -06:00
Gregory Nutt
c3b09d5d8b NSH: By default, basename and dirname should be disabled if scripting is disabled 2015-11-23 17:22:37 -06:00
Gregory Nutt
f2ea88fc9e NSH: Like bash, NSH set command should strip off any leading or trailing whitespace 2015-11-23 11:18:32 -06:00
Gregory Nutt
178c9780a8 NSH: Add support for basename and dirname commands 2015-11-23 10:21:15 -06:00
Ken Pettit
ad48d89fe2 mksmartfs: Move into apps/fsutils from kernel, now uses only open and ioctl. Add configuration option to supported multiple root directories. From Ken Petit 2015-11-23 06:59:56 -06:00
Gregory Nutt
146f126ead nshlib: Now that NuttX automatically converts block to character devices, the implemention of the DD command no longer has to muck with block to character conversion 2015-11-21 11:57:41 -06:00
Gregory Nutt
646febbe86 Merged in nghiaho12/apps/nghia/improve_tab_completion (pull request #18) 
better TAB completion
 2015-11-02 06:53:30 -06:00
Nghia Ho
211f8bf76d bug fix:: Never reach readline_prompt() in nsh_initialize, moved it up to the top. Works now. 
enhancement: TAB completion now works like Unix, it will autocomplete as much as possible for
multiple matches.
 2015-11-01 01:41:01 -07:00
Gregory Nutt
5f4060ce1e NSH mount command: Add support for TMPFS 2015-10-12 09:36:42 -06:00
Gregory Nutt
aacfce081e Fix several cosmetic, C coding style issues 2015-10-03 11:03:42 -06:00
Gregory Nutt
e9447c6058 Standardize nameing of the pre-processor definitiongs group header 2015-10-02 14:06:11 -06:00
OrbitalFox
93876b5af3 Kconfig: Improved comments 2015-09-24 08:28:50 -06:00
Gregory Nutt
6b1d61c759 More references to avsprintf that need to be changed vasprintf 2015-09-07 17:09:11 -06:00
Gregory Nutt
7084ce0e02 Cosmetic: Move # of pre-processior command to column 1 2015-09-05 09:12:20 -06:00
Paul A. Patience
266cc147c4 Correct #if to #ifdef when the macro can be undefined 2015-09-01 13:44:06 -04:00
Gregory Nutt
69f578d442 Correct last change to NSH file 2015-08-30 18:57:32 -06:00
Bruno Herrera
4555282571 apps/nshlib: Fix error handling in 'mv' command. On a failure to expand the second path, the memory allocated for the expansion of the first path was not being freed. From Bruno Herrera. 2015-08-30 18:28:04 -06:00
Bruno Herrera
321924c0a5 apps/nshlib: Fix error handling in 'cat' command. On a failure to allocate memory, a file was not being closed. From Bruno Herrera. 2015-08-30 18:23:25 -06:00
Gregory Nutt
b7b943067a NSH: Fix formatting of ifconfig Local Loopback output 2015-08-26 07:59:12 -06:00
Gregory Nutt
ce3a2dc0d4 NSH changes to work with the network local loopback device 2015-08-24 13:59:52 -06:00
Pavel Pisa
64fb2c63b6 Correct numerous places where NETUTILS_DNSCLIENT was instead of NETDB_DNSCLIENT 2015-08-20 16:08:45 -06:00
Gregory Nutt
74801cf38e apps/tools/mkkconfig.sh: The top-level Kconfig file is not auto-generated. The autogenerated Kconfig file will be constructed so that every second level directory that contains a Kconfig file will automatically be sourced 2015-08-11 17:49:10 -06:00
Gregory Nutt
820c5c42dd readline/NSH: Extend the tab-completion logic so that NSH commands can also be completed by pressing the tab key 2015-07-30 12:11:58 -06:00
Gregory Nutt
0c85a9f4b3 Eliminates a warning about unused variable 2015-07-29 19:57:31 -06:00
Gregory Nutt
f1b4b4d47a Fix a few mistakes I made on the last commit 2015-07-28 07:30:05 -06:00
Gregory Nutt
766886310d readline: Update initial readline commit -- make option configurable. Add an interface to de-couple the readline implementation from NSH. Misc. updates for coding style 2015-07-28 07:17:50 -06:00
Gregory Nutt
3a57f9e2ef Adjust for increased size of the scheduling policy field from 1 to 2 bits to allow additional, planned scheduling policies 2015-07-23 10:15:57 -06:00
Gregory Nutt
62853218d3 Eliminate a warning detected by nuttx/tools/testbuild.sh 2015-07-22 14:09:29 -06:00
Gregory Nutt
25f144fd55 NSH: Fix compile issue from all of the recent NETDB changes. If NETDB is not enabled, we need to use inet_pton() instead of gethostbyname() 2015-07-17 08:33:22 -06:00
Gregory Nutt
25d45d642f Add an NSH nslookup command 2015-07-13 11:19:02 -06:00
Gregory Nutt
ba72767d09 apps/netutils/netlib and other files: Create netlib wrapper functions around dns_getserver() and dns_setserver() to isolate application code from changes to those interfaces. 2015-07-12 11:53:23 -06:00
Gregory Nutt
812450ebe6 If NSH or Webclient is selected, make sure that CONFIG_LIBC_NETDB is enabled; reanem dnsclient.h to dns.h 2015-07-12 09:25:39 -06:00
Gregory Nutt
c7bd1f4186 Replaces calls to non-standard dns_hostip() with calls to the standard gethostbyname() 2015-07-11 08:15:29 -06:00
Gregory Nutt
effda16cf5 DNS: Remove some unused, non-functional DNS functions 2015-07-11 07:17:11 -06:00
Gregory Nutt
5e8928d009 Remove bogus references to CONFIG_HAVE_GETHOSTBYNAME 2015-07-10 14:03:28 -06:00
Gregory Nutt
48c36800f5 apps/netuils/dnsclient and include/netutils/dnsclient.h: Move the DNS client logic into the NuttX C library. It is a necessary part for the full implementation of the netdb logic and provides more flexibility in that location. 2015-07-10 11:31:13 -06:00
Gregory Nutt
74aa0f21c5 NSH uname command: Uninitialized variable caused failures in some unlucky cases 2015-07-05 09:06:13 -06:00
Gregory Nutt
584284adc3 NSH uname, Use unknown if board name is not known 2015-07-05 08:42:00 -06:00
Gregory Nutt
fa8f6d53e1 Update README 2015-07-05 06:51:39 -06:00
Gregory Nutt
243694308e NSH uname command will now print the board directory for -i option 2015-07-05 06:47:29 -06:00
Gregory Nutt
d710b7c3b7 Add support for the NSH uname command 2015-07-04 15:13:11 -06:00
Gregory Nutt
f9afefe7e9 Fix a typo in a Kconfig file 2015-07-04 13:17:10 -06:00
Gregory Nutt
95eea325cf Add poweroff and reboot NSH commands as alternatives to the shutdown command 2015-07-04 12:44:24 -06:00
Gregory Nutt
165637ce27 The NSH shutdown option should be called --reboot, not --reset, for compatibility with the statndard shutdown command 2015-07-04 11:39:44 -06:00
Gregory Nutt
a2a1530694 The NSH shutdown command now supports the --reset option, if available in hardware 2015-07-04 11:11:16 -06:00
Gregory Nutt
fa9e1812f8 Oops.. forgot to add a file before the last commit 2015-07-04 08:44:42 -06:00
Gregory Nutt
a18ed33d99 NSH now supports a shutdown command if CONFIG_BOARDCTL_POWEROFF-y 2015-07-04 08:20:19 -06:00
Gregory Nutt
d5b6949c9f Fix references to the no-longer-existent misc/ directory in comments, README files, and documentation 2015-06-28 08:14:53 -06:00
Gregory Nutt
90679a633a NSH mount command now recognizes the Union file system type 2015-06-07 08:18:07 -06:00
Gregory Nutt
fe2c662ee8 Trivial change for consistency. 2015-05-27 08:43:50 -06:00
Gregory Nutt
5f17ec1fa2 Enhanced output to NSH ping command from Max Neklyudov 2015-05-27 08:25:26 -06:00
Gregory Nutt
905f881162 Enhancements to NSH ifconfig for case of multi-link operation, TUN device and local connections. From Max Neklyudov. 2015-05-19 12:26:20 -06:00
Gregory Nutt
c07a5b2775 Local sockets: Add poll support for Unix stream sockets. From Jussi Kivilinna. 2015-05-12 07:41:12 -06:00
Gregory Nutt
49bb0ed48e time.h: Add localtime prototypes; NSH: Correct test for gmtime_r return value 2015-04-21 09:26:18 -06:00
Gregory Nutt
10fc3ed1ac configs/sim/src: Add logic to test localtime and TZ database. See apps/system/README.txt for info 2015-04-15 11:00:40 -06:00
Gregory Nutt
23075e0b30 Allow NSH date command with no RTC. This command is useful without an RTC too. Also, this permits testing on the simulator which never has an RTC 2015-04-11 12:13:18 -06:00
Gregory Nutt
4a2000e2ae Ooops accidentally committed some trash debug code 2015-04-07 12:18:08 -06:00
Gregory Nutt
6ad0579b85 Modbus: Misc cleanup 2015-04-07 12:16:15 -06:00
Gregory Nutt
9fcd34f1c4 NSH initialization now calls boardctl(BOARDIOC_INIT) instead of board_app_initaliaze. Modify all configurations: Make sure that CONFIG_LIB_BOARDCTL=y appears wherever CONFIG_NSH_ARCHINIT=y appears. Remove support for CONFIG_NSH_ARCHMAC. It is not used and there are better ways to do that operation 2015-03-31 12:14:16 -06:00
Gregory Nutt
6bad91308d Rename arch_nshinitialize() to board_app_initialize() 2015-03-31 10:21:31 -06:00
Gregory Nutt
c9eff799c0 Cortex-M7: Add support for enabled the D-Cache in write only mode. 
SAMV7 Ethernet:  I- and D-Cache are now enabled in the netnsh/ configuration.  D-Cache is enabled in write-though mode.  This mode is necessary because the DMA descriptors are each 8-bytes in size but the D-Cache cache line is 32-bits in size. So it is impossible make coherency for every 8-byte DMA descriptor without write-through.
 2015-03-29 14:42:03 -06:00
Gregory Nutt
d8d4a3486c SAMV7 USB: Updates to early initialization logic 2015-03-24 10:05:21 -06:00
Gregory Nutt
f81be29c2f Costmetic changes name while debugging a filename issue 2015-03-15 12:22:12 -06:00
Gregory Nutt
edf876ed1a Add missing options to NSH Library Kconfig. From Freddie Chopin 2015-03-02 06:16:38 -06:00
Gregory Nutt
f5aac7178e Fix some time value changes; mostly changing greater than 1000000000 to greater than or equal to 1000000000. From Juha Niskanen 2015-02-20 07:07:36 -06:00
Gregory Nutt
ae142c0605 NSH: The default priority of the network initialization thread should be lower. It is CPU intensive and can interfere with other operations 2015-02-17 13:14:50 -06:00
Gregory Nutt
d32e66b6a2 apps/netutils/netlib: Add utilities to convert to/from prefix lengths from/to 128-bit network masks. Modify the NSH IPv6 ifconfig command to show the network mask in a more standard, human readable way. 2015-02-06 10:23:15 -06:00
Gregory Nutt
dc527f5c9d Fix errors in range of IPv6 netmask range in Kconfig files 2015-02-05 10:47:42 -06:00
Gregory Nutt
1b9d7c1522 ICMPv6: Some initial bugfix from first tests of the ICMPv6 auto-configuration logic. so far so good but a lot more testing is needed 2015-02-03 16:19:08 -06:00
Gregory Nutt
6273eb0160 ICMPv6: This completes coding of the ICMPv6 auto-configuration feature. It is not yet functional 2015-02-03 15:40:56 -06:00
Gregory Nutt
5499189417 Add netlib and application hooks for ICMPv6 auto-configuration (still incomplete 2015-02-03 08:01:55 -06:00
Gregory Nutt
3b60c71103 NSH: Fix error in conditional compilation in PS command. From Macs N 2015-02-03 07:21:56 -06:00
Gregory Nutt
0724e7ccf3 drivers/ramdisk.c and include/nuttx/fs/ramdisk.h: Add logic to dispose of the drvier and RAM buffer when the RAM disk has been unlinked and all open references to the RAM disk have been closed. Add new parameters to romdisk() to specify what should be done with the RAM/ROM buffer -- Should it be freed or not? Changed all calls to ramdisk() to use these new parameters. 2015-02-01 07:24:16 -06:00
Gregory Nutt
72d3a733a8 Elminate some warnings with TCP and UDP are disabled 2015-01-29 09:33:45 -06:00
Gregory Nutt
b7fa5a3359 Unix domain: A few fixes from early integration 2015-01-27 16:39:30 -06:00
Gregory Nutt
5060e08fcb Unix domain: With these changes I can build a system with no link layer enabled, only Unix domain sockets 2015-01-27 15:26:03 -06:00
Gregory Nutt
a4e66459d0 Various fixes to get Unix domain sockets to build on the simulator without Ethernet 2015-01-27 14:11:46 -06:00
Gregory Nutt
0c7864ae68 NSH: A few minor improvements/corrections to the network status presentation 2015-01-24 09:11:12 -06:00
Gregory Nutt
6d2ecf8a79 Fix another error in conditional compilation; plus some additional cosmetic changes 2015-01-24 09:04:28 -06:00
Gregory Nutt
d001ccb196 Correct a typo in conditional compilation 2015-01-24 08:38:13 -06:00
Gregory Nutt
beaa7b74a6 Networking: Clean up network status collection and presentation for IPv6 2015-01-24 08:26:12 -06:00
Gregory Nutt
55ac29ac27 Networking: Various bugfixes related to IPv6 ping 2015-01-23 14:40:09 -06:00
Gregory Nutt
b39fb98d86 apps/nshlib: Add the ping6 command to support checking IPv6 networks. NSH logic is complete but still missing some network level support 2015-01-23 12:49:49 -06:00
Gregory Nutt
c96aa9218a Correct name of fields in struct sockaddr_in6: sin6_port and sin6_family, not sin_port and sin_family 2015-01-20 18:14:09 -06:00
Gregory Nutt
27b3913c92 Fix defaults for IPv6 netmask 2015-01-20 13:48:03 -06:00
Gregory Nutt
71d2ae0fac NSH library: Disable put and get commends of TFTP client is not enabled; disable wget command if web client is not enabled 2015-01-19 10:32:46 -06:00
Gregory Nutt
8fbc907aa2 apps/nshlib: Add logic to initialize IPv6 addresses, to display IPv6 addresses, and enough IPv6 ifconfig to allocation compilation (logic still not implemented) 2015-01-19 09:59:43 -06:00
Gregory Nutt
9bff050ad0 Update ChangeLog 2015-01-19 09:03:10 -06:00
Gregory Nutt
953c0fb069 Rename IPv4 netlib functions and files to make room in the namespace for corresponding IPv6 functions and files 2015-01-18 14:17:00 -06:00
Gregory Nutt
36118a1b76 Networking: Replace all references to net_ipaddr_t with either in_addr_t on net_ipv6addr_t. The goal is to support both IPv4 and IPv6 simultaneously. This requires that the two types be distinct and not conditionally typedef'ed to net_ipaddr_t. 2015-01-16 12:30:18 -06:00
Gregory Nutt
308818b718 NSH TFTP get command: Wrong file name used for the destination. From Lazlo 2014-12-10 18:37:43 -06:00
Gregory Nutt
fa035373e4 Correct spelling: MOUNTPOINT not MOUNTPOUNT. Numerous places. Some are problems. From Woohan Lee 2014-12-01 06:41:30 -06:00
Gregory Nutt
64b8c1841c Clarify MTU/BUFSIZE in apps/ README.txt files and Documentation 2014-11-16 08:50:36 -06:00
Gregory Nutt
4542091dac NSH USB Console: Add logic to restart the console wait if an error occurs while reading from the console. In USB console startup, the logic must be able to open the USB serial and receive 3 newlines. However, it the USB driver is disconnected or otherwise fails before the 3 newlines are received, the receive loop becomes a killer, infinite loop, CPU hog. Noted by spasbyspas 2014-11-16 06:48:46 -06:00
Gregory Nutt
f9074a02ad Network: Various fixes for clean compile with both Ethernet and SLIP 2014-11-15 13:52:39 -06:00
Gregory Nutt
da8ba5dfd5 Remove use of CONFIG_MASK_TASK_ARGS from NSH 2014-11-13 06:27:29 -06:00
Gregory Nutt
eaddb9059f Emit a warning if number of arguments to builtin or file app can be truncated 2014-11-12 14:23:14 -06:00
Gregory Nutt
131b8c5946 Move CONFIG_NSH_TMPDIR to CONFIG_LIBC_TMPDIR 2014-11-05 07:49:20 -06:00
Gregory Nutt
a7121f98d9 Fix some errors that I introduced into NSH telnet this morning 2014-10-29 15:25:34 -06:00
Gregory Nutt
21d498f695 Fix some typos 2014-10-29 10:48:50 -06:00
Gregory Nutt
5d360c72b9 Fix problem with trailing whitespace (newline) in Telnet username/password. Noted by Lazlo 2014-10-29 10:29:21 -06:00
Gregory Nutt
2719815dd9 Update everything under apps/ to use the corrected syslog interfaces 2014-10-08 11:34:22 -06:00
Gregory Nutt
79169c711f fix reversed in/out file closing when an error occurs. From Ken Pettit 2014-10-03 11:22:37 -06:00
Gregory Nutt
763519b00a NSH Fix ls -l output for regular files 2014-09-30 14:41:58 -06:00
Gregory Nutt
f856424ce6 Add support for a custom NSH ROMFS startup image header file location. From Martin Lederhilger 2014-09-30 06:43:49 -06:00
Gregory Nutt
c26939d9d8 More testing, bugfixes and integration of VFS-based named semaphores 2014-09-28 17:30:42 -06:00
Gregory Nutt
4a3b3c2d46 Eliminate some nshlib warngings 2014-09-16 16:08:06 -06:00
Gregory Nutt
d71be2d021 Fix more errors associated with posix_spawn system calls 2014-09-12 17:09:18 -06:00
Gregory Nutt
4eadcabc1b Several commands must be disabled in the kernel build because they depend on interfaces that are not available outside of the kernel: dd, df, losetup, mkfatfs, mkdr, and ps. 2014-09-07 10:46:06 -06:00
Gregory Nutt
d6bcd1a93a Add an install target to all makefiles. For the import build, the top-level Makefile now does two passes: (1) builds libapp.a, then (2) installs the programs (not yet finished) 2014-09-06 08:00:47 -06:00
Gregory Nutt
00545910f0 Fix NSH PS command: If there are not argument, it would print garbage for argument list 2014-09-01 16:47:20 -06:00
Gregory Nutt
7c7a81aa69 Rename CONFIG_NUTTX_KERNEL to CONFIG_BUILD_PROTECTED; Partially integrate new CONFIG_BUILD_KERNEL 2014-08-29 14:47:22 -06:00
Gregory Nutt
61ab95593f Update README files, Kconfig help comments, and make the network monitor not EXPERIMENTAL 2014-08-18 07:24:47 -06:00
Gregory Nutt
bf98b2bbac Change the way PHY interrupts work: disable automatically. Then we have to re-subscribe each time after the interrupt fires 2014-08-17 16:51:56 -06:00
Gregory Nutt
5be7dd2140 NSH net monitor: use a seamphore instead of boolean; use sem_timedwait instead of a boolean to communicate 2014-08-17 14:48:27 -06:00
Gregory Nutt
c18504f820 Minor corrections during integration of link status monitor 2014-08-17 11:26:02 -06:00
Gregory Nutt
5943cf2c2b Extend the NSH network initialization logic. There is now an option that will create a network monitor thread that will monitor the state of the link. When the link goes down, the code will attempt to gracefully put the Ethernet driver in a down state; When the link comes back, the code will attempt to bring the network back up. 2014-08-17 09:51:26 -06:00
Gregory Nutt
1fd7fea390 More of the PHY event notification logic change: Fix some compile errors when full feature is enabled; Add some missing ioctol logic 2014-08-16 15:04:09 -06:00
Gregory Nutt
b4bc994f50 Cosmetic changed, updated README files, improved comments 2014-08-10 13:11:31 -06:00
Gregory Nutt
b651f37ce7 Remove CONFIG_DISABLE_CLOCK 2014-08-07 12:35:24 -06:00
Gregory Nutt
dc57af80fc NSH networking: There is now a configuration option that will bring up the network on an separate thread. Since the network bring-up is asynchronous, there are not serial console start-up delays due to the network negotiation time. 2014-08-06 11:59:41 -06:00
Gregory Nutt
d4aa9e7b6d NSH Networking: Also add an option to let platform-specific logic select the MAC address. 2014-08-06 10:12:10 -06:00
Gregory Nutt
16b2090ca0 NSH Networking: Software assigned MAC address is now configurable. From Lazlo 2014-08-06 09:19:26 -06:00
Gregory Nutt
6671be97cc dd support for a USB keyboard as the NxConsole and text widget input. Not fully functional as of this initial check-in. Basic functionality is there, but there are conditions were the keyboard gets lost. 2014-07-30 17:01:51 -06:00
Gregory Nutt
85f245202b SAMA5: Poll USB keyboard at a higher rate for better response 2014-07-29 08:57:35 -06:00
Gregory Nutt
ddc799d049 Fix some cloned errors in SAM GPIO interrupt setup 2014-07-07 15:54:37 -06:00
Gregory Nutt
187e4f204d NSH Keyboard Input: Worked okay until you try to disabled the keyboard 2014-07-06 08:09:33 -06:00
Gregory Nutt
633fae427d NET: emoved all includes of uip.h; added includes of ip.h wherever needed. Tried to fix problems of the now missing sneak inclusions because uip.h was removed. There are probably a few of these that were missed. 2014-07-04 19:13:08 -06:00
Gregory Nutt
069c43a5dd Remove all inclusion of uip.h 2014-07-04 16:58:22 -06:00
Gregory Nutt
14297d4e30 NSH Keyboard: Close stdin before trying to reopen. Otherwise, driver will persist 2014-07-03 17:08:59 -06:00
Gregory Nutt
9a49735c4b NSH: Add an option to take stdin from a USB keyboard device 2014-07-03 16:25:02 -06:00
Gregory Nutt
e7fedfa4a5 NET: Rename functions in apps/netutils/netlib to begin with netlib_ vs uip_ 2014-07-02 16:52:02 -06:00