Alan Carvalho de Assis
873e4ee83e
apps/examples/qencode: The QENCODER name was changed to SENSORS_QENCODER fix it here
2017-09-24 14:53:27 -06:00
Gregory Nutt
c221af2f72
Update some comments.
2017-09-23 12:39:01 -06:00
Gregory Nutt
267521af9b
Squashed commit of the following:
...
apps/examples/flowc: Adds the necessary termios controls to enable hardware flow control
apps/examples/flowc: Add a simple test of serial hardware flow control. This commit just defines the frame work. Hardware flow control is not yet enabled.
2017-09-23 11:02:21 -06:00
Gregory Nutt
450624c370
Squashed commit of the following:
...
netutils/netlib: Add netlib_ipv6adaptor()
netutils/netlib: Add netlib_ipv4adaptor()
2017-09-19 15:21:13 -06:00
Alan Carvalho de Assis
22d43409f2
apps/examples/apa102: Add a Rainbow example for APA102 LED Strip
2017-09-18 17:03:20 -06:00
Gregory Nutt
8beab59e0d
Trivial changes from review of last PR.
2017-09-14 15:04:43 -06:00
Florian Olbrich
bbade5522d
Merged in floxx/apps (pull request #107 )
...
Added a simple reader example for the LIS3DSH acceleration sensor on STM32F4Discovery
* Added a simple reader example for the LIS3DSH acceleration sensor as
found on STM32F4Discovery.
* Edited lis3dsh_reader_main.c to obey nuttx coding standard.
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-09-14 20:59:05 +00:00
Gregory Nutt
cb13b7ed1b
examples/fb: Extend test to include 1-bpp monochrome.
2017-09-13 10:58:29 -06:00
Gregory Nutt
0fd8ade4b5
Rename CONFIG_AUDIO_DEVICES to CONFIG_DRIVERS_AUDIO to conform better to the evolving configuration naming standard.
2017-09-12 14:11:17 -06:00
Gregory Nutt
0cb9810844
examples/fb: Flesh out the framebuffer driver test.
2017-09-12 11:10:16 -06:00
Gregory Nutt
8ac1952d4c
examples/fb: Add a simple test for the framebuffer character driver. This initial commit just verfies some interfaces and initialization logic. Still need to add to graphics update logic.
2017-09-12 09:51:47 -06:00
Masayuki Ishikawa
98fb74b82c
examples/adc: Fix g_adcstate.count initialization.
2017-09-11 14:01:09 +09:00
Gregory Nutt
928443e385
examples/ostest: sem_open() now returns SEM_FAILED in the event of a failure.
2017-09-08 10:15:46 -06:00
Gregory Nutt
cdf0528933
examples/dac: Lets use printf instead of _info in application code.
2017-09-01 07:39:39 -06:00
Juha Niskanen
318350d289
examples: add DAC example
2017-09-01 11:22:39 +03:00
Masayuki Ishikawa
25237eafe0
apps/examples/nsh: Remove APPNAME, PRIORITY, and STACKSIZE settings from Makefile to avoid showing nsh in Builtin Apps.
2017-08-26 06:18:03 -06:00
Gregory Nutt
7fa2bd1a23
examples/: Correct naming of some configuration variables.
2017-08-24 13:37:36 -06:00
Gregory Nutt
7c26ee7611
Remove a warning of unused local variable.
2017-08-20 11:15:26 -06:00
Gregory Nutt
41ce937ed0
Changes to netlib and nsh so that you build build with PF_IEEE802154 enabled and 6LoWPAN disabled.
2017-08-20 09:09:47 -06:00
Gregory Nutt
6cbf2b9130
Squashed commit of the following:
...
commit 6fbbca4ce308f5d8130d795342c7639555a7e5bf
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Sat Aug 19 08:46:27 2017 -0600
apps/examples/pf_ieee802154: Add PANID to command line options; Cannot bind to address zero... There is no counterpart to INADDR_ANY for these radios (not now at least).
commit 354111108a88f549248537e79dbf79998f458ded
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 17:47:10 2017 -0600
PF_IEEE802154: A few bugfixes
commit f1bb947609ed5e9e8816234653d6c8ee24585079
Author: Gregory Nutt <gnutt@nuttx.org>
Date: Fri Aug 18 15:17:32 2017 -0600
Add file missed in last commit
commit 9a73930e864db83609b5cc0d7c940d8efeaade66
Merge: 315b888f c433e07a
2017-08-19 08:47:35 -06:00
Gregory Nutt
7a8561728c
The last change added .PRECIOUS: $(BIN) to everyway Makefile in hopes the libapps.a will not be deleted on Control-C (unproven so far). However, $(BIN) may contain back slashes in some build platforms and that causes problems for make: It can't handle the backslashes in the .PRECIOUS dependency list. $(BIN) replaced with ../../libapp.a, where the number of ../ depends on the depth of the Makefile in the apps/ source tree.
2017-08-13 11:03:17 -06:00
Gregory Nutt
a66da34f18
All Makefiles: Add .PRECIOUS: apps/libapps.a to every Makefile. Hopefully this will end awkward problems when you Control-C out of a build and libapps.a is deleted.
2017-08-13 09:35:14 -06:00
Gregory Nutt
0bc7bce916
Eliminate warning about an unused global variable.
2017-08-12 16:40:09 -06:00
Gregory Nutt
4477cbcbd1
Fix some misplaced semicolons as found in build testing.
2017-08-12 14:27:48 -06:00
Gregory Nutt
45eb06c3c2
apps/examples/nximage: Remove unused global variable.
2017-08-12 12:48:38 -06:00
Gregory Nutt
a063227e58
Eliminate a warning about unused static data.
2017-08-12 12:15:21 -06:00
Gregory Nutt
4ee084ab24
Remove references to obsoleted CONFIG_NETDEV_MULTINIC and CONFIG_NETDEV_MULILINK.
2017-08-08 18:37:00 -06:00
Gregory Nutt
69b004790d
Update .gitignore
2017-08-08 11:12:19 -06:00
Gregory Nutt
444922ea93
apps/examples/udp: Enable testing with the broadcast address.
2017-08-08 08:16:47 -06:00
Gregory Nutt
0c34ebb72f
Typo: USE_NOFITY_POLL -> USE_NOTIFY_POLL
2017-08-02 17:32:27 -06:00
Gregory Nutt
c7e7b42b06
examples/nettest/: Loopback option shoudl be available in Kconfig for PktRadio.
2017-08-01 17:22:01 -06:00
Gregory Nutt
411e053460
Review of last PR. Changes to make consistent with NuttX coding standard.
2017-07-28 09:14:47 -06:00
Giorgio Groß
5f73f290a1
Implement powermonitor example for ltc4151 current and voltage monitor
2017-07-28 15:26:11 +02:00
Gregory Nutt
915b42f870
apps/examples/ipforward: Test extended to test forwarding of ICMPv6 multicast messages.
2017-07-09 12:05:23 -06:00
Gregory Nutt
1657d1fff5
apps/examples/ipforward: A few fixes, but still no cigar.
2017-07-07 17:32:37 -06:00
Gregory Nutt
37bb767089
Completes code for apps/examples/ipforward. Still untested.
2017-07-07 15:00:00 -06:00
Gregory Nutt
47a42852e5
apps/examples/ipforward: Add beginning of an IP forwarding example using only TUN devices.
2017-07-07 15:00:00 -06:00
Gregory Nutt
3e37dbc4ab
apps/examples/nettest: Fix incorrectly named file.
2017-07-05 12:52:46 -06:00
Gregory Nutt
abc01c0e5b
apps/examples/keypadtest: REMOVED and warehoused in the Obsoleted repository. This was just a bad clone of apps/examples/hidkbd for a keypad driver that was removed years ago. It also uses illegal function calls into the OS. So it has no purpse: It is redundant, it uses illegal interfaces, and is a test for non-existent code.
2017-07-04 15:57:30 -06:00
Gregory Nutt
9aa35b2799
apps/examples/thttpd: Remove the netstats demo. This depends on an illegal function call and cannot be supported. That example could be replaced with logic that uses the procfs network entries as was done for NSH which had the same issue. But I am too lazy to implement that
2017-07-01 08:03:54 -06:00
Gregory Nutt
28415d662b
netutils/telnetd and users of telnetd: Add support for IPv6.
2017-06-27 09:14:13 -06:00
Gregory Nutt
342de81641
NSH library: Add a Telnetd command. This is needed when network initialization is deferred. In that case, telnet daemon cannot be started until the network is finally initialized. The telnetd command was added just for that case: So that the telnet daemon can be started from the NSH command line after the network is configured.
2017-06-26 18:00:13 -06:00
Gregory Nutt
ace5bdc7c0
examples/nettest: Add more printf output
2017-06-26 10:54:32 -06:00
Gregory Nutt
6b25b0d65e
examples/nettest: Fix some printf output
2017-06-25 13:01:21 -06:00
Gregory Nutt
664ab42da7
examples/udp and examples/nettest: Fix some naming collisions; examples/nettest: Fix some build issues with two targets.
2017-06-25 09:15:27 -06:00
Gregory Nutt
b868fbe879
examples/nettest: The send buffer size is now a configuration option.
2017-06-24 09:49:44 -06:00
Gregory Nutt
3c97bfeae6
examples/nettest: Fixes for building with loopback device again after the last changes.
2017-06-23 19:14:39 -06:00
Gregory Nutt
a3ac695f17
examples/nettest: Add support for both enpoints on target boards vs. one on a target and one on the host PC.
2017-06-23 18:12:34 -06:00
Gregory Nutt
1c0f237c06
examples/nettest: More prep for a second target
2017-06-23 15:49:27 -06:00
Gregory Nutt
cde3cb1544
Forgot to add files before last commit.
2017-06-23 12:30:11 -06:00
