raiden00pl
8568439b80
examples/foc: configure acceleration and deceleration from command line
2023-10-29 10:40:27 +08:00
raiden00pl
1c922f2d2d
examples/foc: add phase angle observer support (sensorless mode)
...
This app can work now as sensorless ESC.
Also introduce a cmd line option that force open-loop control
which is useful when tuning angle/velocity observers
2023-10-19 19:33:43 +08:00
raiden00pl
8398297518
examples/foc: add an option to call nxscope work from control thread
...
This alows nxscope data to be sent with every cycle of the control loop,
which increases the execution time of the control loop, but allows data
to be sent at a highier frequency using the small nxscope buffer.
Useful when tuning and debuging using RTT transfer.
2023-10-19 01:24:07 +08:00
raiden00pl
de6a384668
examples/foc: add velocity PI controller
2023-10-18 14:15:12 +08:00
raiden00pl
8e0819df04
examples/foc: add velocity observers
2023-10-17 22:42:42 +08:00
raiden00pl
7e5a436ff9
examples/foc: add real time data capture with the NxScope library
2023-05-19 20:18:38 +08:00
raiden00pl
f358bdfcb3
examples/foc: send messages only to active control threads
2023-05-15 13:19:34 -03:00
raiden00pl
beb5369a0d
examples/foc/foc_main.c: fix de-initialization sequence
2023-05-15 13:19:34 -03:00
raiden00pl
13bfad1053
examples/foc: control motor identification parameters from cmd line
2022-11-04 02:07:15 +08:00
raiden00pl
2bbfb1b396
examples/foc: move validate_args to parseargs file
2022-11-04 02:07:15 +08:00
raiden00pl
2c5dc1e4a2
examples/foc: simplify control thread configuration
2022-11-04 02:07:15 +08:00
raiden00pl
b1f91528ec
examples/foc: separate control thread configuration from general args
2022-11-04 02:07:15 +08:00
raiden00pl
c2efa80969
examples/foc: refactor args
2022-11-04 02:07:15 +08:00
Xiang Xiao
893387b2c5
Fix the minor style issue
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-10-16 19:07:16 +02:00
Xiang Xiao
9291d07a87
Fix the coding style issue
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-10-06 12:20:32 +02:00
raiden00pl
35c31e35c1
examples/foc: add options to run only the sensor alignment routine or the motor identification routine
2022-08-28 13:24:51 +08:00
raiden00pl
e6b6c14f53
examples/foc: make the FOC current controller configurable
...
For now only the FOC PI current controller is supported, but this can be easily extended to support other control methods
2022-02-16 23:49:46 +08:00
Fotis Panagiotopoulos
bc5d8034f1
Typo fixes.
2022-01-06 10:30:41 +08:00
raiden00pl
37aa562f03
examples/foc: move adc and button interfaces logic to a separate file
2021-12-07 07:51:12 -06:00
raiden00pl
ea27aacbd2
examples/foc: move threads related logic to a separate file
2021-12-07 07:51:12 -06:00
raiden00pl
3fda1294d7
examples/foc: move setpoint and vbus configuration from foc_adc.h to foc_cfg.h
2021-12-07 07:51:12 -06:00
raiden00pl
f38d7d2ed3
examples/foc: terminate main loop if FOC control loop terminated
2021-11-07 03:42:06 -06:00
raiden00pl
b30f3329f6
foc/examples: initial logic to support torque, velocity and position controller modes
2021-11-04 13:50:57 -05:00
raiden00pl
33b34f8852
examples/foc: open FOC device in FOC threads
2021-10-31 12:13:45 -05:00
raiden00pl
2fb79db8b4
examples/foc: replace the requested velocity input with a more general setpoint input.
...
This is the inital step to support torque/velocity/position control
2021-10-30 13:50:56 -05:00
raiden00pl
9c8e3cc46a
examples/foc: add option to disable open-loop operations
...
Initial step towards sensored control
2021-10-30 10:00:38 -05:00
raiden00pl
013caaa334
examples/foc: move the parse args logic to a separate file
2021-10-30 07:59:02 -05:00
Xiang Xiao
213e60232f
Include assert.h in necessary place
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-05-31 08:51:22 +02:00
raiden00pl
864a61a431
Add FOC motor controller example
...
For now, only open-loop velocity control is supported.
2021-04-10 00:40:43 -05:00
