apps/graphics/ft80x: Replace polling logic with gentler signal logic when waitinf for the CMD FIFO to become empty.
apps/examples/ft80x: Add first co-processor example.
apps/graphics: Extend library to manage display lists either in display memory (RAM DL) or provided directly to th co-processor FIFO (RAM CMD).
apps/examples/ft80x: Some minor clean-up. Trivial changes for coprocessor support.
apps/graphics/ft80x: Add support for accessing graphics ram. apps/examples/ft80x: Add more primitive graphics demos.
apps/examples/ft80x: Add a couple more demos of primitives. Use new ft80x_dl_create() to simplify.
apps/graphics/ft80x: Add ft80x_dl_create() which simplies writing of very simple display lists.
apps/examples/lvgldemo: Fix up some include paths
apps/examples/lvgldemo: The last final now conforms to the NuttX coding style.
apps/graphics/littlevgl: Two more files are closer to the NuttX coding style.
apps/graphics/littlevgl: Two more files are closer to the NuttX coding style.
apps/examples/lvgldemo: Three more files are closer to the NuttX coding style.
apps/examples/lvgldemo: Two more files are closer to the NuttX coding style.
apps/examples/lvgldemo: Two more files are closer to the NuttX coding style.
Add include/graphics/.gitignore
apps/include/graphics: Remove lvgl.h. graphics/littlevgl/Makefile now copies the file into position.
apps/graphics/littlevgl: Add .gitignore file
apps/graphics/littlevgl: Most of these files follow the coding style now.
apps/graphics/littlevgl: This gets a couple of files closer to the NuttX coding style.
apps/examples/lvgldemo: Add lvgldemo example
apps/graphics/littlevgl: Add littlevgl library
FTP: Adds support for IPv6 and fixes various transfer issues
* netutils/ftpd: Fix support for IPv6 FTP server
* netutils/ftpc:Adds support for IPv6 sockets
* ftpc: Must convert port received by EPSV reply to network order
* ftpc: Data socket address for passive connection should be same as server address
* ftpc: Must skip human readable string in EPSV response before scanning for port
* ftpc: Don't send PASS command if USER command was sufficient. ie no password required
* ftpc: Generically handle permanent negative completion in shard ftpc_cmd logic
* ftpc: Minor addresssing fix
* ftpc: Tweak logic for overriding network debugging output
* FTP: Adds option for setting stack size of various threads in FTPD and FTPC
* netutils/ftpd: Fixes build error setting IPv4 address. sin_addr => sin_addr.s_addr
* netutils/ftpd: Protects against partial write returns by looping in that case
Approved-by: Gregory Nutt <gnutt@nuttx.org>
apps/fsutils/mkfatfs: New user-space fatfs appears to work fine.
apps/fsutils/mkfatfs: Move mkfatfs from the OS to here. Not fully integrated on the intial commit.
apps/netutils/netlib: netlib_ipv[4|6]adaptor() will now use the new routing table interfaces if they are available: If the desination IP address does not correspond to the network served by any device, then the address of the router that should get us to the correct sub-net is is determined. Then the network adaptor that can communicate with the that router has the IP address that will returned.
apps/netutils/netlib: Add new utilities netlib_ipv[4|6]router() that can be used to determine the IP address of a router that would be used some some destination IP address that is not locally accessible.
apps/netutils/netlib: Add helpers for reading the routing table: netlib_read_ipv4route() and netlib_read_ipv6route()
Merged in merlin17/apps/i8sak-sock (pull request #108)
i8sak: Fixes mistake where socket was accidentally bound to endpoint address
i8sak: Fixes bad logic that bound outbound port to the destination address
i8sak: Adds sniffer port option and a few other get/set parameters
Merged in merlin17/apps/i8sak-sock (pull request #106)
i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated
wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM
wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set
wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes
wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout
Merged in merlin17/apps/i8sak-sock (pull request #104)
i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works
i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works
Merged in merlin17/apps/i8sak-sock (pull request #103)
wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer
* wireless/ieee802154: Removes useless wpanlistener folder with build files
* wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality
* wireless/ieee802154/i8sak: Starts adding support for both character driver and socket
* Removes unneccessary Kconfig statement
* ieee802154: Adds function prototypes missed on previous commit
* wireless/ieee802154/libmac: Fixes sixlowpan_resetreq
* wireless/ieee802154/libmac: Small fixes and removes enableevents helper
* apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly
* apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control
Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now.
* wireless/ieee802154/i8sak: Non-functional clean-up.
* i8sak: Removes chan and coordinfo commands and introduces generic get/set commands
* i8sak: startpan now requires PAN ID argument
* i8sak: Adds ability to set endpoint address using set command
* i8sak: Minor fixes and cleanup
* i8sak: Adds addrmode setting to i8sak. exposed via get/set calls
* i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting.
* i8sak: Trivial
* i8sak: Adds get/set hook for endpoint address mode (destination address mode)
* i8sak: Changes default address modes to short.
* i8sak: Fixes build erros associated with enabling 6LoWPAN support
* i8sak: Adds socket version of get/set implementation. Simplifies some logic as well.
* wireless/ieee802154/i8sak: Removes unused files
* wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument.
Approved-by: Gregory Nutt <gnutt@nuttx.org>
