I8sak improvements
* wireless/ieee802154: Adds support for getting/setting maxretries and promsicuous mode from i8sak
* wireless/ieee802154/i8sak: Fixes a build warning and handles a few cases where a fault can occur due to not catching missing arguments.
Approved-by: Gregory Nutt <gnutt@nuttx.org>
wireless/ieee802154/i8sak: Fixes issues related to re-running daemon. Releases lock when releasing daemon. Re-sets daemon_shutdown so that a subsequent daemon launch does not immediately return.
Approved-by: GregoryN <gnutt@nuttx.org>
Author: anchao <anchao@pinecone.net>
apps/, most main() function: Correct CONFIG_BUILD_LOADABLE usage
Loadable apps/: Correct loadable symbol table generate
apps/system/ubloxmodem: Fix build break
apps/examples/ostest: start restart/waitpid/user test from main loop
apps/nshlib: Expand reboot and poweroff commands to include a second, optional mode argument
Author: Gregory Nutt <gnutt@nuttx.org>
An attempt to fix build issues. Does not work.
apps/examples/ostest: Fix some inappropriate renaming of static functions introduced with recent patches.
apps/builtin/exec_builtin.c: Fix a error introduced by recent comments. Found in build testing.
Author: anchao <anchao@pinecone.net>
apps/builtin/exec_builtin.c: Try posix_spawn if builtin apps do not have have an entry point.
apps/Application.mk: introduce MODULE config to simplify tristate(m)
apps/nsh: Change the nuttx shell module type to tristate
apps: Add loadable application support
script/mksymtab: Generate symbol table name by default
apps/builtin: Allow loadable applications can register with apps/builtin.
apps/builtin/exec_builtin.c: Try posix_spawn if builtin apps do not have have an entry point.
apps/Application.mk: introduce MODULE config to simplify tristate(m)
apps/nsh: Change the nuttx shell module type to tristate
apps: Add loadable application support
script/mksymtab: Generate symbol table name by default
apps/builtin: Allow loadable applications can register with apps/builtin.
i8sak: i8sak daemon now gets shutdown if not in use.
Previously, once the i8sak daemon was started, by running any command, it would stay running. This means that if you want to use i8sak to setup your network, but then want exclusive access to the char device, or network device, you have to manually shutdown the i8sak daemon. Now the daemon stays active as long as required to finish any commands, or stays open if a new command keeps it on, but when all work is finished, it shuts down.
Approved-by: GregoryN <gnutt@nuttx.org>
i8shark: Adds CONFIG_IEEE802154_I8SHARK_XBEE_APPHDR option to remove XBee's application header before sending to Wireshark. This option will corrupt any traffic received that does not include this application header.
Approved-by: Gregory Nutt <gnutt@nuttx.org>
i8sak: Channel setting is now saved locally, so when performing a startpan or assoc, the channel previously set is still used, even though the MAC layer gets reset. Also fixes a few build issues
Approved-by: Gregory Nutt <gnutt@nuttx.org>
Adds i8shark, a sniffer "adapter" that captures all 802.15.4 traffic, packages it into a Wireshark ZEP packet, and sends it to a host running Wireshark.
Approved-by: Gregory Nutt <gnutt@nuttx.org>
i8sak: Updates README to include details about socket interface and new addressing setup and fixes warning
* i8sak: Updates README to include details about socket interface and new addressing setup
* i8sak: Fixes warning about unitintialized variable
Approved-by: Gregory Nutt <gnutt@nuttx.org>
Merged in merlin17/apps/i8sak-sock (pull request #108)
i8sak: Fixes mistake where socket was accidentally bound to endpoint address
i8sak: Fixes bad logic that bound outbound port to the destination address
i8sak: Adds sniffer port option and a few other get/set parameters
Merged in merlin17/apps/i8sak-sock (pull request #106)
i8sak: Endpoint address is updated whenever 802.15.4 addressing information is updated
wireless/ieee802154/i8sak: Converts PF_INETX to PF_INET6 and SOCK_IWPAN to SOCK_DGRAM
wireless/ieee802154/i8sak: Catches case where arguments are included, but the interface was never set
wireless/ieee802154/i8sak: Endpoint IP address is now updated whenever 802.15.4 addressing info changes
wireless/ieee802154/i8sak: Routes all error output to stderr rather than stdout
Merged in merlin17/apps/i8sak-sock (pull request #104)
i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works
i8sak: Fixes socket version of sniffer logic. socket logic for sniffer now works
Merged in merlin17/apps/i8sak-sock (pull request #103)
wireless/ieee802154/i8sak: Adds socket interface support. You can now use both socket or char driver to control the MAC layer
* wireless/ieee802154: Removes useless wpanlistener folder with build files
* wireless/ieee802154/libmac: Merges some files together and adds some missing sixlowpan functionality
* wireless/ieee802154/i8sak: Starts adding support for both character driver and socket
* Removes unneccessary Kconfig statement
* ieee802154: Adds function prototypes missed on previous commit
* wireless/ieee802154/libmac: Fixes sixlowpan_resetreq
* wireless/ieee802154/libmac: Small fixes and removes enableevents helper
* apps/ieee802154/i8sak: Moves wpanlistener functionality into i8sak directly
* apps/ieee802154/i8sak: Major restructuring to allow both char driver and socket control
Also changes Kconfig options and certain args held previously by i8sak. This is to bring it closer to a real CLI tool rather than a development tool. For instance, no longer does the app change the addressing of the device automatically. This is because you probably don't want i8sak overwriting the extended address after board bring-up. Additionally, the endpoint logic has been simplified. There is only ever one active endpoint now.
* wireless/ieee802154/i8sak: Non-functional clean-up.
* i8sak: Removes chan and coordinfo commands and introduces generic get/set commands
* i8sak: startpan now requires PAN ID argument
* i8sak: Adds ability to set endpoint address using set command
* i8sak: Minor fixes and cleanup
* i8sak: Adds addrmode setting to i8sak. exposed via get/set calls
* i8sak: Clean up poll logic and allow polling address mode to be based off endpoint address setting.
* i8sak: Trivial
* i8sak: Adds get/set hook for endpoint address mode (destination address mode)
* i8sak: Changes default address modes to short.
* i8sak: Fixes build erros associated with enabling 6LoWPAN support
* i8sak: Adds socket version of get/set implementation. Simplifies some logic as well.
* wireless/ieee802154/i8sak: Removes unused files
* wireless/ieee802154/libmac: Fixes sixlowpan_assocresp. resp was not being copied into the ioctl argument.
Approved-by: Gregory Nutt <gnutt@nuttx.org>
