follow up the the kernel change:
https://github.com/apache/nuttx/pull/10834
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Signed-off-by: TaiJu Wu <tjwu1217@gmail.com>
Support Stateless and Stateful. The renew6 is used as follows:
- Stateless: renew6 eth0
- Stateful: renew6 eth0 1
Signed-off-by: liqinhui <liqinhui@xiaomi.com>
There is a POSIX defined interface to get file descriptor from file_struct
stream. Applications should use it and not access the structure directly.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
What works:
- Basic server & client operation
- Transmission and reception of announce, sync and follow-up
Still missing:
- SO_TIMINGS for getting more precise packet timestamps
- Implementation of delay_req and delay_resp packets
- Status and stop interfaces for the daemon
to fix error: microADB/hal/hal_uv.c:32:38: error:
a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
After optimizing the vync mechanism, it is necessary to use ioctl (display) to refresh the display in dual buffer mode.
run nxcamera.
Signed-off-by: jianglianfang <jianglianfang@xiaomi.com>
Type int expects 4 bytes for function write(). Type char expects 1 byte which matches the real usage of function write().
Signed-off-by: renzhiyuan1 <renzhiyuan1@xiaomi.com>
update LIBFDT to LIBC_FDT
move version_gen.h and place it under nuttx/libs/libc/fdt/
change include path to nuttx/libs/libc/fdt/dtc/
Signed-off-by: liaoao <liaoao@xiaomi.com>
Refer -- fs_open.c:
/* If the file is opened for creation, then get the mode bits */
if ((oflags & (O_WRONLY | O_CREAT)) != 0)
{
mode = va_arg(ap, mode_t);
}
Signed-off-by: huxiandong <huxiandong@xiaomi.com>
CC: nxcamera.c nxcamera.c: In function 'show_image':
nxcamera.c:85:20: error: initialization of 'uint32_t *' {aka 'unsigned int *'} from incompatible pointer type 'uint8_t *' {aka 'unsigned char *'} [-Werror=incompatible-pointer-types]
85 | uint32_t *pbuf = pcam->bufs[buf->index];
| ^~~~
cc1: all warnings being treated as errors
Signed-off-by: yangsen5 <yangsen5@xiaomi.com>
A sensor of this type measures the force on it, and additionally
compares the force with one or more specified thresholds. The sensor
can output the force value directly. Moreover, it's usually applied
as a press key. In that case, when it detects a force greater than
some given threshold, a corresponding event is reported.
Signed-off-by: jinxudong <jinxudong@xiaomi.com>
bug: if user input obr_topic is sensor_gps_sate(wrong topic, which does not exist), the using of `strncmp` will assign idx=8 (as sesnor_gps) in the first.
However, there is no match in the `g_sensor_list`, hence idx=8 will give out value of `sensor_gps` as output(wrong).
Change: This update aims to match the whole value of sensor name in `g_sensor_list`, while keeping `sensor_name+number` match in this condition.
Signed-off-by: haopengxiang <haopengxiang@xiaomi.com>
Since the current fb display format of vela qemu is rgb565, it is necessary to convert the frame obtained by v4l2 to rgb565
Signed-off-by: yangsen5 <yangsen5@xiaomi.com>
Usage:
device /dev/audio/compress0p
play /data/test.sbc
This function requires the platform to support compress decoding and playback
Signed-off-by: shipei <shipei@xiaomi.com>
rb_main.c:219:42: warning: 'snprintf' output may be truncated before the last format character [-Wformat-truncation=]
219 | snprintf(temp, PATH_MAX, "%s/%s", priv->foldname,
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Get help to use ./sbrb.py -h
./sbrb.py -h
usage: sbrb.py [-h] [-k KBLOCKSIZE] [-t TTY] [-b BAUDRATE] [-r [RECVFROM ...]] [-s SENDTO] [--debug DEBUG] [filelist ...]
positional arguments:
filelist if filelist is valid, that is sb, else is rb
options:
-h, --help show this help message and exit
-k KBLOCKSIZE, --kblocksize KBLOCKSIZE
This opthin can set a customsize block size to transfer
-t TTY, --tty TTY Serial path
-b BAUDRATE, --baudrate BAUDRATE
-r [RECVFROM ...], --recvfrom [RECVFROM ...]
recvfile from board path like this: ./sbrb.py -r <file1 [file2 [file 3]...]> -t /dev/ttyUBS0
-s SENDTO, --sendto SENDTO
send file to board path like this: ./sbrb.py -s <path on board> -t /dev/ttyUBS0 <file1 [file2 [file3] ...]>
--debug DEBUG This opthin is save debug log on host
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
1.Timeout processing
2.clear error count when received successfully once
3.fix the bug of insufficient header memory application
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
The standard popen uses the pipeline internally, so the stream
returned by it can only support read-only or write-only.
Now this patch is expanded through sockpair, which can support both
read and write. Therefore, we can use the stream to read and write
access this task (posix_spawn start).
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
Compared to the previous version, the following factors have been taken into account in the new version of cachespeed:
1. the user needs to care about getting a piece of available memory (even if this piece of memory may memory stomp during use)
2. High repetition of test code, poor readability, and overall high test coupling
3. Not taking into account the alignment cache line situation
4. When comparing values between different test tools, there is a little error because of the different ways to get the values (different fine reading)
Therefore, in the new version according to the above problems have been improved:
1. Provide a "test_skeleton", which contains the overall testing process
2. The user only needs to execute, not to care about how to get the available memory address, and the memory allocated by the program also ensures the memory security and data accuracy
3. The system to obtain the data required for the test reduces the difficulty of use and the possibility of inaccurate results due to data errors.
4. Provide two kinds of precision data results, which can be configured through Kconfig
5. Optimize the output log, now more intuitive and concise, to help the subsequent data organization and observation
6. New test items for aligned/unaligned cache line
7. Better readability and extensibility, making it easier to add/remove test items
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Partially implement the gdb rsp protocol,
you can debug the nuttx kernel through the serial port or the network
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
CC: pthread/pthread_mutexinconsistent.c libuv/src/unix/getaddrinfo.c:103:9: warning: implicit declaration of function ‘getaddrinfo’; did you mean ‘uv_getaddrinfo’? [-Wimplicit-function-declaration]
103 | err = getaddrinfo(req->hostname, req->service, req->hints, &req->addrinfo);
| ^~~~~~~~~~~
| uv_getaddrinfo
libuv/src/unix/getaddrinfo.c: In function ‘uv_freeaddrinfo’:
libuv/src/unix/getaddrinfo.c:222:5: warning: implicit declaration of function ‘freeaddrinfo’; did you mean ‘uv_freeaddrinfo’? [-Wimplicit-function-declaration]
222 | freeaddrinfo(ai);
| ^~~~~~~~~~~~
| uv_freeaddrinfo
CC: misc/lib_crc16ccitt.c libuv/src/unix/getnameinfo.c: In function ‘uv__getnameinfo_work’:
libuv/src/unix/getnameinfo.c:45:9: warning: implicit declaration of function ‘getnameinfo’; did you mean ‘uv_getnameinfo’? [-Wimplicit-function-declaration]
45 | err = getnameinfo((struct sockaddr*) &req->storage,
| ^~~~~~~~~~~
| uv_getnameinfo
Signed-off-by: fangxinyong <fangxinyong@xiaomi.com>
In this change, we have added a malloc from the heap to get the address when the user does not pass an address.
We took into account that the user would be testing the memory after the device was started, but this required them to focus on how to get a piece of address available. To improve the experience of tool users, we can simply ask them to get a size for testing purposes, while also keeping the ability to test for a given address
This change is mainly in the 'parse_commandline' function, so there are a few changes in the way it is used, see usage for details.
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Add missing FAR and CODE to pointers
Remove FAR for non-pointer variables
Remove extra spaces and align the parameters
Add do {} while(0) wrapper in macro
Use nitems to calculate number of elements in arrays
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
Test on sim/nsh (CONFIG_SYSTEM_CUTERM_DISABLE_ERROR_PRINT=y):
text data bss dec hex filename
397049 26704 4128 427881 68769 nuttx /* before */
396481 26704 4128 427313 68531 nuttx /* after */
-568
Signed-off-by: chao an <anchao@xiaomi.com>
