Gregory Nutt
3367bde8fe
NSH: Add conditions so that ifconfig and ifup will not be disabled if we are using only PF_IEEE802154
2017-08-21 09:32:07 -06:00
Gregory Nutt
41ce937ed0
Changes to netlib and nsh so that you build build with PF_IEEE802154 enabled and 6LoWPAN disabled.
2017-08-20 09:09:47 -06:00
Gregory Nutt
767b29335c
Eliminate some warnings found in build testing.
2017-08-13 12:25:22 -06:00
Gregory Nutt
7a8561728c
The last change added .PRECIOUS: $(BIN) to everyway Makefile in hopes the libapps.a will not be deleted on Control-C (unproven so far). However, $(BIN) may contain back slashes in some build platforms and that causes problems for make: It can't handle the backslashes in the .PRECIOUS dependency list. $(BIN) replaced with ../../libapp.a, where the number of ../ depends on the depth of the Makefile in the apps/ source tree.
2017-08-13 11:03:17 -06:00
Gregory Nutt
a66da34f18
All Makefiles: Add .PRECIOUS: apps/libapps.a to every Makefile. Hopefully this will end awkward problems when you Control-C out of a build and libapps.a is deleted.
2017-08-13 09:35:14 -06:00
Gregory Nutt
970e98a902
Additional changes associated with last commit.
2017-08-12 12:11:22 -06:00
Gregory Nutt
90ebda9120
Eliminate another warning about an unused function
2017-08-12 12:09:01 -06:00
Gregory Nutt
1cdf4ad8d1
Fix a warning found in build testing
2017-08-12 11:14:30 -06:00
Gregory Nutt
7a7c7ee93a
Update README and fix some conditional compilation from the last commit.
2017-08-11 15:56:53 -06:00
Gregory Nutt
5dcf5620e3
NSH Library: Add a route command that will dump the content of routing table.
2017-08-11 15:33:26 -06:00
Gregory Nutt
1e23b30afe
more issues with last change: netmask must be in network order.
2017-08-10 16:08:09 -06:00
Gregory Nutt
654d526a69
NSH addroute/delroute: Fix an indexing problem introduced with previous commit.
2017-08-10 11:40:12 -06:00
Gregory Nutt
52e4da1e41
NSH addroute and delroute: All expression of the netmask in IPv4 CIDR or IPv6 slash notation. This really reduces the pain of using the commands, especially for IPv6.
2017-08-10 10:30:20 -06:00
Gregory Nutt
f58768db3d
NSH library: Update addroute and delroute command. The would support either IPv4 or IPv6, but not both.
2017-08-10 09:15:44 -06:00
Gregory Nutt
3b8c97747d
netutils/netlib: Fix netlib_nodaddrconv() so that its return type is the same as other address conversion functions. NSH: Correct parsing of ifconfig so that you can specify the HW address without specifying the IP address.
2017-08-02 14:30:34 -06:00
Gregory Nutt
d6050d70a2
NSH library: Extend ifconfig command so that it can set variable length packet radio addresss.
2017-08-02 13:13:19 -06:00
Gregory Nutt
c343fc618e
apps/netutils/netlib: Add support for PktRadio IOCTL commands.
2017-08-02 12:40:50 -06:00
Gregory Nutt
7d0037b08a
NSH: Misc changes needed for PktRadio support.
2017-07-30 16:03:56 -06:00
Gregory Nutt
7441c5422f
Socket I/F: Cleanup for good CONFIG_NET_PKT build.
2017-07-14 13:43:04 -06:00
Masayuki Ishikawa
ef04aeaead
NSH library: Fix build break in nsh_command.c with IPv4/IPv6 dual stack.
2017-07-04 10:13:26 +09:00
Gregory Nutt
d81d9c419b
Eliminat a warning when both Ethernet and 6LoWPAN are enabled; improve some naming.
2017-07-02 11:28:12 -06:00
Gregory Nutt
28415d662b
netutils/telnetd and users of telnetd: Add support for IPv6.
2017-06-27 09:14:13 -06:00
Gregory Nutt
98204bad94
system/telnet: POLL must not be disabled in configuration. Telnet client port argument is no optional.
2017-06-27 07:46:16 -06:00
Gregory Nutt
9091716419
revise some of the state handling in the previous commit.
2017-06-26 18:16:05 -06:00
Gregory Nutt
342de81641
NSH library: Add a Telnetd command. This is needed when network initialization is deferred. In that case, telnet daemon cannot be started until the network is finally initialized. The telnetd command was added just for that case: So that the telnet daemon can be started from the NSH command line after the network is configured.
2017-06-26 18:00:13 -06:00
Gregory Nutt
d5a897fa1b
Merge branch 'master' of bitbucket.org:nuttx/apps into ieee802154
2017-06-19 13:35:34 -06:00
Gregory Nutt
2f975e8f06
nshlib: fix size of 6LoWPAN extended address.
2017-06-19 09:47:17 -06:00
Oleg Evseev
f13d4125a4
Merged in lukegluke/apps (pull request #91 )
...
fix copy-paste typo in nsh_usbconsole.c
Approved-by: Gregory Nutt <gnutt@nuttx.org>
2017-06-19 15:29:09 +00:00
Oleg Evseev
8ee1e79d03
fix copy-paste typo in nsh_usbconsole.c
2017-06-19 15:05:06 +00:00
Gregory Nutt
2bb14d854d
L should be capitalized in 6LoWPAN
2017-06-18 16:02:11 -06:00
Gregory Nutt
2e4740e6bb
i8sak: Missing newline in fprintf output
2017-06-18 11:28:36 -06:00
Gregory Nutt
9485744265
NSH network initialization: Do not set the IP address for 6loWPAN. The 6loWPAN stack uses IP address that derive from the ieee 802.15.4 addressing and cannot be (safely) configured by the user.
2017-06-17 11:31:04 -06:00
Gregory Nutt
22d9c69d87
NSH network configuration: Re-factor a function that has gotten too big and too complex.
2017-06-17 10:37:31 -06:00
Gregory Nutt
033b42789b
NSH: Fix some ieee 802.15.4 initialization logic. It should not set the saddr or panid; those cannot be hard-coded but must come from the coordinator.
2017-06-17 10:04:18 -06:00
Masayuki Ishikawa
41dee001ad
Merge branch 'master' into bug_fix_by_sony
2017-05-22 09:13:02 +09:00
Gregory Nutt
4e7b17d783
Fix some typos in comments.
2017-05-21 12:05:07 -06:00
Gregory Nutt
8c1446671c
apps/nshlib: Add a new option CONFIG_NSH_NETLOCAL that will suppress some built in operations and will support manual configuration of a wireless network
2017-05-21 12:00:55 -06:00
Simon Piriou
523d7645c4
wapi: add basic wapi_event_stream_extract implementation
2017-05-21 16:24:49 +02:00
Nobutaka Toyoshima
3a8cfb6c04
nshlib: Fix a resource leak in cmd_hexdump()
...
Jira: PDFW15IS-265
Coverity-ID: 10786
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2017-05-20 17:57:03 +09:00
Sebastien Lorquet
ea1025ead2
DHCPC: Remove hard-coded interface device. Now passed as a parameter to dhcpc_open().
2017-05-19 15:31:22 -06:00
Sebastien Lorquet
297844b1ce
Fix comments formatting
2017-05-19 17:50:26 +02:00
Sebastien Lorquet
aefddc3648
Second batch of changes (no problems)
2017-05-19 17:37:17 +02:00
Gregory Nutt
13911d9b17
Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they.
2017-05-11 13:40:03 -06:00
Gregory Nutt
1bad025c81
Cosmetic changes to comments
2017-05-11 07:46:08 -06:00
Gregory Nutt
5fbf2fd8d1
NSH wireless setup: Move call to nsh_associate(). It should be possible to associate with an AP when DHCPC is disabled.
2017-05-09 06:39:08 -06:00
Gregory Nutt
8380447e1a
Merge remote-tracking branch 'origin/master' into ieee802154
2017-05-08 14:31:54 -06:00
Gregory Nutt
0376019c35
WPA associate: NSH was not setting the algorithm parameter.
2017-05-08 13:28:08 -06:00
Gregory Nutt
6ec8e56f89
Merge remote-tracking branch 'origin/master' into ieee802154
2017-05-06 11:30:48 -06:00
Gregory Nutt
40a1fbf498
Forgot to add a file in the last commit.
2017-05-06 11:28:56 -06:00
Gregory Nutt
a0915850b9
wireless/wapi: wpa_driver_wext_associate() now accepts a configuration parameter that can be used to specify the wireless properties. nshlib: NSH now has configuration options to select the wireless properties. It builds the configuration structure and passes this to wpa_driver_wext_associate() so that it will setwork the network as configured.
2017-05-06 11:28:11 -06:00
Gregory Nutt
44ace8e1cc
6loWPAN: Replace some Rime address naming with more consistent short/exended address terminology
2017-05-04 08:21:12 -06:00
Simon Piriou
33027bd66e
wireless/wext: Add drivers_wext from the WPA supplicant; Integrate into NSH
2017-05-02 09:43:48 -06:00
Gregory Nutt
a5c439777d
nshlib/nsh_netinit.c: If IEEE802.11 selected use wlan0 instead of eth0 for network device name.
2017-05-02 08:26:21 -06:00
Gregory Nutt
5b7f2b0ce2
Eliminate a warning
2017-04-29 08:52:10 -06:00
Gregory Nutt
08b2fee0fb
NSH: Needs to include tftp.h if TFTP no disabled
2017-04-29 08:42:26 -06:00
Ian McAfee
8007332ab1
I need to look at the registers that are at or around 0xe000ef90. Using mw and xd, I see that nsh does not support pointers greater than 0x7fffffff. A quick look at the source shows that the pointers for those two commands are set with calls to strtol() rather than strtoul(). Changing the two pointer-setting instances to strtoul() fixes the problem, at least for my architecture/config.
2017-04-26 17:54:56 -06:00
Gregory Nutt
ad608c705c
nshlib: nsh_netcmds.c should include netlib.h even if neither TCP nor UDP are enabled
2017-04-25 08:25:23 -06:00
Gregory Nutt
c2bdd49421
netlib and NSH: Add logic to set the IEEE802.15.4 PAN ID.
2017-04-19 18:10:39 -06:00
Masayuki Ishikawa
6b75120352
NSH library: Fix open flags in nsh_codeccmd.c
...
Jira: PDFW15IS-2824
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2017-04-19 16:12:44 +09:00
Gregory Nutt
775d1052a5
NSH set command: Eliminate useless argc check of SCRIPTS are enabled but ENVIRONMENT is disabled
2017-04-09 12:03:18 -06:00
Gregory Nutt
169bcab331
NSH: Eliminate warning about unused variable.
2017-04-09 11:54:59 -06:00
Gregory Nutt
8369052a22
NSH library: Extend ifconfig to support 6loWPAN. Adapt to some changes in configuration variable usage.
2017-04-08 12:21:40 -06:00
Gregory Nutt
194c2d86a8
6loWPAN: Add network IOCTL support to set the node address
2017-04-06 16:00:41 -06:00
David Sidrane
35cf98d4df
Print expanded variables if -x
2017-04-05 18:31:47 -06:00
David Sidrane
d03aa9112e
Added support for set [{+|-}{e|x|xe|ex}] [<name> <value>]
...
Set the 'exit on error control' and/or 'print a trace' of commands when parsing scripts in NSH. The settinngs are in effect from the point of exection, until they are changed again, or in the case of the init script, the settings are returned to the default settings when it exits.
Included child scripts will run with the parents settings and changes made in the child script will effect the parent on return.
Use 'set -e' to enable and 'set +e' to disable (ignore) the exit condition on commands. The default is -e. Errors cause script to exit.
Use 'set -x' to enable and 'set +x' to disable (silence) printing a trace of the script commands as they are ececuted. The default is +x. No printing of a trace of script commands as they are executed.
2017-04-05 18:25:59 -06:00
Gregory Nutt
eef0161dd4
examples/nettest: Trying to adapt to use for testing 6loWPAN.
2017-04-03 15:33:39 -06:00
Gregory Nutt
efa2de16a4
NSH: Fix some warnings about integer/pointer casts of different sizes (probably only effects 64-bit simulation)
2017-04-03 09:26:10 -06:00
Jussi Kivilinna
3e2743e826
nshlib: fix building when CONFIG_NET_USRSOCK enabled with other link-layer
2017-03-31 09:10:55 -06:00
Tomasz Wozniak
71b45ed2c2
built-in libc defect workaround: replace '%6.6u' format with an equivalent '%06u'
2017-03-21 09:39:51 +01:00
Gregory Nutt
2ef46ce4ba
NSH library: In nsh_argexand(), if CONFIG_NSH_ARGCAT is defined but CONFIG_NSH_CMDPARMS defined and/or CONFIG_DISABLE_ENVIRON not defined, then there is a situation that causes an infinite loop in the parser. Noted by Freddie Chopin.
2017-03-09 08:07:22 -06:00
Alan Carvalho de Assis
8e7ed15cce
NSHLIB uname command: Eliminate 'defined but not used' warning in some configurations
2017-03-07 15:36:18 -06:00
Alan Carvalho de Assis
d506939b59
NSHLIB ps command: Eliminate 'defined but not used' warning in some configurations
2017-03-07 15:10:17 -06:00
Gregory Nutt
a7e34f3b97
Make use of FAR storage class consistent
2017-02-27 07:54:21 -06:00
Gregory Nutt
fa4b047d35
Fix typo in last commit
2017-02-27 07:49:49 -06:00
Gregory Nutt
590791e12d
NSH: Eliminate a warning when all memory inspection commands are disabled.
2017-02-27 07:30:52 -06:00
Gregory Nutt
bab5df0966
Eliminate a warning about an unused variable.
2017-02-27 07:30:52 -06:00
Gregory Nutt
81645fe18f
strcasecmp, strncasecmp, bzero, bcmp, and bcopy should be defined in strings.h, not string.h. bzero, bcmp, and bcopy are legacy functions; the contemporary counterparts should be used instead.
2017-02-16 15:58:15 -06:00
Gregory Nutt
740b528199
apps/examples/stat: Add a simple test for stat(), fstat(), and statfs().
2017-02-13 14:08:19 -06:00
Gregory Nutt
bf9ca8868e
NSH: Both arguments of 'ln' command may be relative paths
2017-02-07 07:56:54 -06:00
Gregory Nutt
1a696b0367
Fix a memory leak in the 'ln' command when a failure occurs.
2017-02-06 10:20:29 -06:00
Gregory Nutt
7a0e08c37b
NSH: Add readlink command.
2017-02-05 10:35:11 -06:00
Gregory Nutt
bb81a3d11d
NSH ls command: if node is a symobolic link, use readlink() to get and the display the target of the symblic link.
2017-02-03 14:13:25 -06:00
Gregory Nutt
9fbca32710
Soft links: Fixed logic in RTOS. Remove NSH kludge of last commit.
2017-02-03 13:23:27 -06:00
Gregory Nutt
51f71304d1
NSH: Extend ls command to show type of symbolic link.
2017-02-03 11:21:37 -06:00
Gregory Nutt
2ac55ec4e7
NSH: Add support for the 'ln' command.
2017-02-02 19:40:59 -06:00
Gregory Nutt
d195751a90
Update NSH and examples/modules for changes in kernel module interface.
2017-01-22 15:11:49 -06:00
Masayuki Ishikawa
4bf85f7c7b
NSH: dd command will show statistics
2016-12-19 18:33:34 -06:00
Gregory Nutt
9b951b4dd8
apps/nshlib: nsh_getdirpath(), use snprint instead of sprintf to avoid possibility of buffer overrun. Noted by Chung Hwan Kim.
2016-10-11 17:35:31 -06:00
Gregory Nutt
2c8ac4440a
apps/nshlib: Don't try to flush output streams if stdio buffered I/O is not supported.
2016-10-06 08:36:15 -06:00
Alan Carvalho de Assis
cdedb412ed
apps/nshlib: Add printf command to NSH, e.g., controlling /dev/userleds from command line: nsh> printf \x01 > /dev/userleds
2016-10-01 07:44:15 -06:00
Neil Hancock
7fc401d3c1
Correct an assertion
2016-09-12 07:26:37 -06:00
Aleksandr Vyhovanec
e832e73b99
nshlib/: Fix missing semicolon; include string.h.
2016-09-05 07:05:17 -06:00
Gregory Nutt
8cfa1dbd3b
The previous commit was reverted. My concern was misplaced: There is a guard boolean to prevent running the init script more than once. This comment just restores some of the good cosmetic changes that were included in the reverted commit.
2016-08-25 14:28:25 -06:00
Gregory Nutt
4eda22b4db
Revert "This commit adds nsh_consolechild(). I noticed that there are several examples that call nsh_consolemain.c to create to create a new NSH session. That will not always work because nsh_consolemain() performs the one-time initialization needed by the NSH library: Mounting, reading, and running the start-up script, configuring USB tracing. Some of those actions will cause failures if attempted twice."
...
This reverts commit 4d364d836a
2016-08-25 14:19:36 -06:00
Gregory Nutt
4d364d836a
This commit adds nsh_consolechild(). I noticed that there are several examples that call nsh_consolemain.c to create to create a new NSH session. That will not always work because nsh_consolemain() performs the one-time initialization needed by the NSH library: Mounting, reading, and running the start-up script, configuring USB tracing. Some of those actions will cause failures if attempted twice.
...
Here are some offenders: examples/cc3000/shell.c, examples/nsh/nsh_main.c, examples/nxterm/nxterm_main.c, and examples/pty_test/pty_test.c. It is possible that for some of those, that represents the first call to nsh_consolemain(). But probably not.
To give other initialization options, I added nsh_consolechild() which is identical to nsh_consolemain() other than it omits all of the one-time initialization. Of course, you would not get the result that you wanted if nsh_consolechild() were called without nsh_consolemain().
2016-08-25 14:14:23 -06:00
Gregory Nutt
e39cfc97c7
Add logic to support an NSH-specific system command
2016-08-25 11:34:36 -06:00
Mateusz Szafoni
6ff8074532
apps/nshlib/nsh_syscmds.c: missing semicolon
2016-08-25 14:26:33 +02:00
Gregory Nutt
c9378ef87e
Fix hex representation of IP address. Also noted by Michał Łyszczek
2016-08-19 06:35:29 -06:00
Gregory Nutt
b9d56991f3
Update some comments. Remove trailing whitespace noted by Michał Łyszczek
2016-08-19 06:25:42 -06:00
Gregory Nutt
823b8c3981
FIFO_SIZE vs PIPE_SIZE
2016-08-04 16:25:47 -06:00
Gregory Nutt
fff8a91e52
Oops, wrong kind of comments
2016-08-04 13:32:19 -06:00
Gregory Nutt
e4914622b3
NSH: cmd_mkfifo depend son CONFIG_DEV_PIPE_SIZE > 0
2016-08-04 12:57:02 -06:00
Gregory Nutt
d5b7268d95
ramdisk.h moved from include/fs/nuttx/ to include/nuttx/drivers.
2016-07-20 14:02:41 -06:00
Gregory Nutt
7d517413cb
Things that use mkfifo() and pipe() depend on CONFIG_PIPES
2016-07-20 10:46:05 -06:00
Gregory Nutt
b1230ce87a
NSH: Eliminate a warning about discarding const
2016-07-15 08:31:47 -06:00
David Alessio
f48b3c73b0
When Priority Inheritance is enabled, the format of /proc/<PID>/status changes to show both the current priority and the thread’s base priority. This messes up the format of cmd_ps.
...
The attached patch fixes cmd_ps to ignore the base priority.
2016-07-15 07:01:02 -06:00
Gregory Nutt
dd7c4c9493
NSH library: Don't show stack usage is CONFIG_STACK_COLORATION is not enabled.
2016-07-13 07:06:32 -06:00
David Alessio
1d8ef23b88
Use fixed point math for cmd_ps removing dependency on floating point libs.
2016-07-12 06:48:30 -06:00
Sebastien Lorquet
2cbad44f1d
This is the Pokemon patch to change all includes fronm <apps/bla/bla.h> to "bla/bla.h"
2016-07-11 10:11:18 -06:00
David Alessio
63ff107419
Fix a typo a a preceding change.
2016-07-11 06:56:34 -06:00
David Alessio
f553fd1316
Recent enhancements to cmd_ps trips a floating point exception if LIBC_FLOATINGPOINT is not defined (at least on Cortex M4 w/ hardfloat). I’m using a buildroot gcc configured to support Cortex-M4F and the hard float ABI, target files are compiles with: -mcpu=cortex-m4 -mthumb -mfpu=fpv4-sp-d16 -mfloat-abi=hard. I’m not sure the best way to address this, but the attached patch file is the first that comes to mind. Note, I added the float qualifier ‘F’ after a few constants to prevent the compiler from promoting the multiplication and division to double (expensive on M4F) then demoting to single float for the store. (sorry, it’s one of my many pet peeves ;)
...
`
2016-07-10 17:49:58 -06:00
David Sidrane
6eab2b7811
Take 2
2016-07-01 09:45:00 -10:00
Gregory Nutt
97e41cdcc5
Add a missing blank line
2016-07-01 13:27:15 -06:00
Gregory Nutt
57a0f88728
Revert "Review of last PR"
...
This reverts commit 0e4c247e1d
2016-07-01 13:26:34 -06:00
Gregory Nutt
0e4c247e1d
Review of last PR
2016-07-01 13:22:36 -06:00
David Sidrane
cbe1d33786
Allow stack usage to be disabled on contrained systems
2016-07-01 08:59:46 -10:00
Gregory Nutt
f48a813e0e
Move apps/include/builtin.h to apps/include/builtin/builtin.h
2016-07-01 07:08:03 -06:00
Gregory Nutt
0e76ca7474
Move apps/include/nsh.h to apps/include/nshlib/nshlib.h
2016-07-01 06:59:23 -06:00
Gregory Nutt
cd741c82cf
apps/include: Move all header files associated with modules in apps/system to apps/include/system
2016-07-01 06:48:22 -06:00
Gregory Nutt
8a03660c72
Remove apps/system/usbmonitor. It has been moved to nuttx/drivers/usbmonitor.
2016-06-30 13:13:05 -06:00
Frank Benkert
65e050dbfb
NSH: PS-Command: print out the stack usage if stack coloration is enabled.
2016-06-30 07:28:42 -06:00
Gregory Nutt
0559581b91
Trivial changes after review of PR
2016-06-27 11:36:34 -06:00
Mateusz Szafoni
d93e8e5c17
Remove references to CONFIG_SYSLOG
2016-06-27 18:39:55 +02:00
Gregory Nutt
a2a9e20c65
Move NSH stuff out of nuttx/configs/Kconfig to here. Why was it in the NuttX tree.
2016-06-24 07:47:03 -06:00
Gregory Nutt
fa4cd10d33
Trivial modification of debug statement
2016-06-23 08:05:06 -06:00
Gregory Nutt
bb06f7368f
Without lowsyslog() *llinfo() is not useful. Eliminate and replace with *info().
2016-06-20 11:48:15 -06:00
Gregory Nutt
5098539063
Add _ to front of remaining debug macros
2016-06-16 12:12:34 -06:00
Gregory Nutt
cc03ecefc8
Rename err() to _err()
2016-06-16 11:44:22 -06:00
Gregory Nutt
65899c99e6
apps/nshlib: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition.
2016-06-14 14:18:07 -06:00
Gregory Nutt
586b0aa7e0
Change names of *dbg() * *err()
2016-06-11 15:51:27 -06:00
Gregory Nutt
f4bae25e32
Rename *lldbg to *llerr
2016-06-11 14:55:13 -06:00
Gregory Nutt
468bdcf8e6
Rename CONFIG_DEBUG to CONFIG_DEBUG_FEATURES
2016-06-11 14:13:39 -06:00
Gregory Nutt
344c92e2a4
Replace all occurrences of vdbg with vinfo
2016-06-11 11:55:38 -06:00
Gregory Nutt
56e75e9db8
Rename CONFIG_DEBUG_VERBOSE to CONFIG_DEBUG_INFO
2016-06-11 11:50:38 -06:00
Sebastien Lorquet
d2aa24ad88
Make sure that APPNAME is defined in all Makefiles that generate applications
2016-06-09 10:51:04 -06:00
Gregory Nutt
a9d57ca022
Merged in marten_svanfeldt/nuttx-apps-public/for_upstream/nsh_netinit (pull request #43 )
...
Make NSH net-initialization be a configuration option
2016-06-09 09:25:27 -06:00
David S. Alessio
bfd5ca7cd2
NTP Client: All retries; Add initialization in NSH network startup logic.
2016-06-09 08:18:49 -06:00
Gregory Nutt
7a5ceb244e
Fix error in comment
2016-06-09 08:13:42 -06:00
Marten Svanfeldt
33c6a6bb75
Make NSH net-initialization be a configuration option
...
Signed-off-by: Marten Svanfeldt <marten@intuitiveaerial.com>
2016-06-09 05:29:01 +02:00
Sebastien Lorquet
bfff5e7179
Add empty preconfig rules to 'leaf' makefiles
2016-06-02 16:24:30 +02:00
Gregory Nutt
0943afd2f9
Kconfig files: All USB-related options depend on CONFIG_LIB_BOARDCTRL and now set CONFIG_BOARDCTL_USBDEVCTL=y
2016-03-26 07:13:57 -06:00
Gregory Nutt
6951366eca
Replace all calls to the OS internal usbdev_serialinitialize with proper calls to boardctl()
2016-03-25 16:00:28 -06:00
Gregory Nutt
a31300cb05
Replace calls to OS internal cdcacm_*, usbmsc_*, and composite_* with boardctl() calls
2016-03-25 13:26:00 -06:00
Gregory Nutt
c6ac4d2581
NSH: ps command will show CPU if SMP is enabled
2016-02-19 15:33:32 -06:00
Gregory Nutt
d5c3bae6cd
apps/: Replace irqsave() with enter_critical_section(); replace irqrestore() with leave_critical_section()
2016-02-14 15:15:37 -06:00
Gregory Nutt
5642e02f77
Fix some incorrect usage of INADDR_ANY
2016-02-09 11:24:30 -06:00
Gregory Nutt
b54aa2b081
NSH: Improve an error message
2016-02-08 16:29:54 -06:00
Gregory Nutt
3df8b716dc
Remove some redundant logic
2016-02-08 16:19:21 -06:00
Gregory Nutt
1482732f18
NetLib: Move functions in netlib.c to separate files; improve some naming
2016-02-08 16:09:24 -06:00
Gregory Nutt
b8c8bea22c
Add an 'arp' command to NSH to support access to the OS ARP table
2016-02-08 14:49:05 -06:00
Gregory Nutt
c8e21ddcd6
Costmetic changes to comments and spacing.
2016-02-06 11:34:39 -06:00
Gregory Nutt
0720f9a357
NSH: Add option to use platform-specific logic to verify login credentials; Add option to add a delay after each failed login attempt
2016-01-22 10:46:19 -06:00
Gregory Nutt
6febdc60c1
Update to use 64-bit timer when available
2016-01-21 12:03:04 -06:00
Gregory Nutt
07cf99130c
nsh_stdsession() cannot use the same login logic as nsh_session(); Also put telnet login in a separate file for symmetry
2016-01-20 15:22:02 -06:00
Gregory Nutt
93d9d5e4ca
apps/nshlib: All NSH sessions may now be protected with passwords stored in the encrypted /etc/passwd file
2016-01-20 14:42:39 -06:00
Gregory Nutt
681bfa2605
NSH: Add logic for the case where the passwd file is read-only. ROMFS image needs to be marked as const, or it will end up in RAM.
2016-01-20 13:05:25 -06:00
Gregory Nutt
3dad8a29a2
NSH now supports an MOTD string that will be presented after the greeting
2016-01-20 11:18:08 -06:00
Gregory Nutt
fe05a8444f
apps/nshlib: Add useradd, userdel, and passwd commends
2016-01-20 09:37:25 -06:00
Gregory Nutt
7f5a7a07a5
Costmetic alignment
2016-01-17 08:12:51 -06:00
Gregory Nutt
b5c5055c41
NSH: Remove partial implementation of the use of IOBJ/IPTR in NSH. There are some complications
2016-01-17 07:53:52 -06:00
Gregory Nutt
16ed293417
Revert "Revert "NSH: All nsh_output strings tagged with IOBJ so that they may be stored in FLASH on AVR""
...
This reverts commit fd083ee981
2016-01-17 07:41:51 -06:00
Gregory Nutt
a5fbb4cd24
Revert "NSHL: Format strings for nsh_output should all have IOBJ qualifier"
...
This reverts commit 186a101d2c
2016-01-17 07:39:33 -06:00
Gregory Nutt
fd083ee981
Revert "NSH: All nsh_output strings tagged with IOBJ so that they may be stored in FLASH on AVR"
...
This reverts commit cb6a914d08
2016-01-17 07:39:17 -06:00
Gregory Nutt
691bd07f2e
NSH library: Costmetic change
2016-01-17 07:29:50 -06:00
Stefan Kolb
3b820bbc78
NSH: Correct an error in conditional compilation
2016-01-13 06:53:33 -06:00
Gregory Nutt
c13b9e6a51
Fix compile error in time command when certain features are disabled
2016-01-08 11:23:45 -06:00
Gregory Nutt
50f44f23f2
Fix an error in last commit; eliminate a warning
2016-01-06 10:14:09 -06:00
Gregory Nutt
186a101d2c
NSHL: Format strings for nsh_output should all have IOBJ qualifier
2016-01-06 08:31:56 -06:00
Gregory Nutt
cb6a914d08
NSH: All nsh_output strings tagged with IOBJ so that they may be stored in FLASH on AVR
2016-01-05 16:38:50 -06:00
Gregory Nutt
611bd4684f
Update some comments
2016-01-04 12:36:38 -06:00
Gregory Nutt
d5df336821
Trivial update to README
2016-01-01 12:16:19 -06:00
Gregory Nutt
31629ee982
Update README
2016-01-01 09:09:34 -06:00
Gregory Nutt
949b4bd520
Correct a statement in the description of the time command
2015-12-31 10:23:11 -06:00
Gregory Nutt
6c89c01cf5
Fix a scaling error in the new time command
2015-12-31 10:03:04 -06:00
Gregory Nutt
3b3b8faf68
Trivial update to README
2015-12-31 09:19:19 -06:00
Gregory Nutt
f09b7e400f
NSH: Add a time command that can be used to time other commands
2015-12-31 09:16:38 -06:00
Gregory Nutt
15201642b3
Minor adjustment of spacing
2015-12-13 10:39:13 -06:00
Gregory Nutt
a620f99306
Update README; trivial changes to lsmod output format
2015-12-13 10:30:47 -06:00
Gregory Nutt
f0a21d3d48
NSH: Add module commands: insmod, rmmod, and lsmod
2015-12-13 09:55:52 -06:00
Gregory Nutt
652853c7d1
NSH DD command: Use nsh_freefullpath() instead of free(). Actually, these are the so this does not fix bug. It is just needed for symmetry.
2015-12-02 14:10:50 -06:00
Gregory Nutt
aa35ebb6b6
Correct a typo in CONFIG_NSH_IPADDR help text.
2015-12-02 16:17:50 +00:00
Gregory Nutt
eb1360d56e
NSH: Add group ID or parent PID to ps command output (if available)
2015-11-30 08:05:34 -06:00
Gregory Nutt
997ba578e4
Default value for LOSMART support should be disabled if MTD_SMART is not selected
2015-11-29 07:20:09 -06:00
Gregory Nutt
cee429beac
Update NSH README. Update ps examples
2015-11-28 17:52:25 -06:00
Gregory Nutt
793f445f54
Update README
2015-11-28 17:28:54 -06:00
Gregory Nutt
7e7dd916ce
apps/nshlib: The 'ps' command now uses /proc/(pid)/ to obtain task status information. A consequence of this is that you cannot use the 'ps' command if the procfs is not enabled and mounted at /proc.
2015-11-28 15:03:21 -06:00
Gregory Nutt
082b452016
Move string trimming logic in nsh_fsutils.c as nsh_trimspaces()
2015-11-28 15:01:00 -06:00
Gregory Nutt
64c7e31896
nshlib: Correct an error message
2015-11-28 11:57:37 -06:00
Gregory Nutt
88d3ac1c92
apps/nshlib: nsh_readfile() should not be marked as static
2015-11-28 11:39:50 -06:00
Gregory Nutt
631c9cec12
apps/nshlib: The I/O buffer, g_iobuffer, should not be a global buffer. That will not work in an environment where there are multiple NSH sessions. The I/O buffer must, instead, be a part part of the session-specific data defined in nsh_console.h # Please enter the commit message for your changes. Lines starting # with '#' will be ignored, and an empty message aborts the commit.
2015-11-28 11:13:47 -06:00
Ken Pettit
d82b8a2e23
apps/nshlib: Add a new NSH losmart command. losmart setups up a loop device for the smart MTD driver similar to losetup but with different syntax. From Ket Petit.
2015-11-28 09:05:05 -06:00
Gregory Nutt
92b1eb36c8
nshlib: Move trim_dir() and foreach_direntry() from nsh_fscmds.c to nsh_fsutils.c as nsh_trimdir() and nsh_foreach_direntry(), respectively
2015-11-28 08:29:27 -06:00
Gregory Nutt
510f325ae4
nshlib: Use CONFIG_NSH_PROC_MOUNTPOINT instead of literal /proc; Move readfile() from nsh_proccmds.c to nsh_fsutils.c as nsh_readfile()
2015-11-28 07:23:08 -06:00
Gregory Nutt
fdb4ee7f48
Update README
2015-11-27 17:54:20 -06:00
Gregory Nutt
0fb32570ff
apps/nshlib: Remove all references to internal OS interface netdev_foreach(). Logic in ifconfig, ifup, and ifown now use the procfs file system to examine networking status.
2015-11-27 17:47:09 -06:00
Gregory Nutt
bb88ff9b12
nshlib/: ifconfig now uses /proc/net/eth0 to display network configuration. You will need to enable the procfs file system in order to use ifconfig
2015-11-27 16:57:22 -06:00
Gregory Nutt
6c6df5e4ed
Remove some ifdef'ed out logic
2015-11-27 13:54:04 -06:00
Gregory Nutt
ee7df4a0ab
Remove carriage returns from a new file
2015-11-27 13:05:02 -06:00
Gregory Nutt
32b992971b
apps/nshlib: The 'ifconfig' command now uses /proc/net/stat to show network statistics. A consequence of this is that you cannot view network statistics if the procfs is not enabled and mounted at /proc
2015-11-27 13:04:11 -06:00
Gregory Nutt
0c03c1e840
NSH ls command should strip any trailing '/' characters from paths
2015-11-27 12:28:46 -06:00
