sergiotarxz/nuttx-apps
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
3,984 Commits 1 Branch 0 Tags 24 MiB
ff54c47e64
Commit Graph

684 Commits

Author SHA1 Message Date
David Sidrane
7db2a352fb nshlib/nsh_console.h: Fix copy paste errors. Some Kconfig configuration names needed CONFIG_ prefix. 2019-01-24 06:36:26 -06:00
Gregory Nutt
6fb399fd65 Update README 2019-01-19 08:54:01 -06:00
Masayuki Ishikawa
060a8fff4b Merged in masayuki2009/nuttx.apps/fix_redirection_error (pull request #167) 
apps/nshlib: Fix buffer overrun when redirected to a file.

SAVE_SIZE must be the same as sizeof(struct serialsave_s)

Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>

Approved-by: GregoryN <gnutt@nuttx.org>
 2019-01-19 12:38:49 +00:00
Anthony Merlino
7cde7e921d Merged in antmerlino/apps/addroute-default-gw (pull request #166) 
addroute: Adds command for setting default gateway. addroute default <ipaddr> <interface>

Approved-by: GregoryN <gnutt@nuttx.org>
 2019-01-13 14:20:15 +00:00
Ken Pettit
e08d100919 apps/nshlib/nsh_parse.c: Fixes an error in the NSH parser. There was a bug when executing an nsh shell script which contains a redirection. When the command in the script is executed, it sets the vtbl->np.np_redirect flag (as it should), but then doesn't restore it, leaving it set at the end of the script execution. Then the vtbl->np.np_redirect flag is set when the 'sh' command completes, causing a restore from un-initialized variables, thus leading to a crash. See the code snippet below for an example test case. 
Test case:

NuttShell (NSH)
nsh> mkrd -s 1024 40
nsh> mkfatfs /dev/ram0
nsh> mount -t vfat /dev/ram0 /tmp
nsh> echo "echo 1 > /dev/null" > /tmp/test.sh
nsh> cat /tmp/test.sh
echo 1 > /dev/null
nsh> sh /tmp/test.sh
...

The nsh prompt doesn't get printed.  You can type a couple of commands, but then the system will crash because of bad pointers.
 2019-01-12 10:56:48 -06:00
Gregory Nutt
eaec674e7b apps/nshlib/nsh_command.c: In all multi-column help output, make the number of rows presented dependent upon the maximum width of the widest column. 2019-01-11 09:21:59 -06:00
Gregory Nutt
d789194836 apps/nshlib/nsh_command.c: In all multi-column help output, calculate an optimal column width rather than using a hard-coded width that may or may not be appropriate. 2019-01-11 08:59:36 -06:00
Gregory Nutt
806ba4ee83 apps/nshlib/nsh_command.c: Fix a few long lines 2019-01-11 07:39:23 -06:00
Ken Pettit
a6d056cf76 apps/nshlib/nsh_command.c: display built-in apps using multi-column mode like the nsh commands 2019-01-11 07:35:04 -06:00
Gregory Nutt
3257ea42d5 apps/nshlib/nsh_parrse.c: Correct some coding standard problems in last PR. 2019-01-06 10:00:19 -06:00
Daniel Agar
c700bf9739 Merged in dagar/nuttx-apps/pr-nshlib (pull request #163) 
[WIP] nshlib add var expansion in nsh parse

Approved-by: GregoryN <gnutt@nuttx.org>
 2019-01-06 15:52:18 +00:00
GregoryN
3bf4b6d245 Merged altconsole into master 2018-12-08 18:53:54 -06:00
David Sidrane
8eb249eea5 apps/nshlib/nsh_romfsetc.c: Add support for CROMFS start-up script 2018-12-06 15:41:18 -06:00
Alan Carvalho de Assis
368f14852e apps/nshlib: Change the way SLCD is supported. Works better 2018-11-30 18:05:18 -06:00
Lwazi Dube
2b8685b63f wireless/bluetooth/btsak/btsak_main.c: Fix address parsing 2018-11-30 06:28:36 -06:00
Gregory Nutt
c0f64622e4 nshlib/nsh_slcd.c: Use file descriptor zero for the NSH console. 2018-11-30 06:18:44 -06:00
Alan Carvalho de Assis
c21d640eaf apps/nshlib: Add support to use SLCD as NSH Console 2018-11-29 18:42:02 -06:00
Lwazi Dube
6af45bdee0 wireless/bluetooth/btsak: Fix some errors in btsak 2018-11-27 08:02:43 -06:00
Xiang Xiao
2db0252e61 nshlib/nsh_envcmds.c: Fix warning g_oldpwd defined but not used [-Wunused-const-variable] 2018-11-07 11:28:28 -06:00
Xiang Xiao
6aee984c91 nshlib/nsh_netinit.c: Move call netlib_icmpv6_autoconfiguration() into nsh_net_bringup() like DHCP 2018-11-07 11:25:39 -06:00
Xiang Xiao
173c985395 nshlib/nsh_fsutils.c: nsh_catfile() should not append '\n' if the last char in file is already '\n' 2018-11-07 11:23:07 -06:00
ligd
19dc7cd3b3 nshlib/nsh_console.c: Add fflush to nsh_consolewrite(). This resolves this problem: 
> cat /dev/ttyCP &
  > echo ls >/dev/ttyCP

Can't get the 'ls' result immediately, because 'cat' cmd uses nsh_consolewrite() and that uses fwrite with no fflush. We can get the 'ls' result after type '\n', because nsh will fflush output when get '\n'.
 2018-11-07 11:18:03 -06:00
Gregory Nutt
b5e032e050 apps/nshlib/README.txt: Another trivial update. 2018-10-02 13:47:16 -06:00
Gregory Nutt
3a474c573c apps/nshlib/README.txt: Trivial correction in comparison to Bash behavior. 2018-10-02 12:15:07 -06:00
Gregory Nutt
cf6c6a9556 apps/nshlib: If CONFIG_NSH_VARS=y, the NSH 'set' command with not argument will list all of the local NSH variables. 2018-10-02 11:54:18 -06:00
Gregory Nutt
cb982ea8df apps/nshlib: Eliminate more new warnings found in build testing. 2018-10-02 11:16:15 -06:00
Gregory Nutt
2bc4d1e8e2 apps/nshlib/nsh_parse.c: Fix a warning (really a bug) detected in build testing. 2018-10-02 11:08:17 -06:00
Gregory Nutt
7f7b728231 apps/nshlib/nsh_parse.c: Correct an error in conditional compilation found in build testing. 2018-10-02 10:21:33 -06:00
Gregory Nutt
8b01ea4434 Update a README/Improve some C comments. 2018-10-02 06:53:16 -06:00
Gregory Nutt
65e0b791b7 apps/nshlib/nsh_envcmds.c: Once an NSH variable has been promoted to an environment variable, subsequent set operations should act on the environment variable rather than creating a new NSH variable that shadows the environment variable. 2018-10-01 16:22:04 -06:00
Gregory Nutt
ee01445aa2 apps/nshlib: Fix an incorrect usage of a configuration variable in a previous commit. 2018-10-01 15:44:41 -06:00
Gregory Nutt
23b32baf98 apps/nshlib: Update README.txt 2018-10-01 14:28:07 -06:00
Gregory Nutt
15da89649d Damn. Forgot to add a file before the last commit.. AGAIN. 2018-10-01 13:31:06 -06:00
Gregory Nutt
e9edfd064f apps/nshlib: Add support for NSH local variables if CONFIG_NSH_VARS are set. These are like environment variables but are local to NSH. The importance of this is that these variables are *not* inherited when NSH creates a new task. The new command 'export' was added. In this case, the NSH variable will be promoted to an environment variable and will then be inherited by any tasks executed by NSH. 2018-10-01 13:30:25 -06:00
Gregory Nutt
d376723ad2 Trivial typo fix 2018-09-30 11:16:10 -06:00
Gregory Nutt
14a262001d apps/nshlib: Add support for the 'env' command. 2018-09-30 10:55:23 -06:00
Gregory Nutt
4bbfdbb9fa nshlib/, examples/: Update to show newer file system object types returned by stat(). 2018-09-22 13:24:24 -06:00
Eunbong Song
2985d3f42b apps/nshlib: Correct maximum number of arguments that can be provided to the mksmartfs command. 2018-09-18 07:24:24 -06:00
Gregory Nutt
42e99d59ce Correct some network-related configuration variable names. All *_MTU defines were changes to *_PKTSIZE gut that was not reflected in apps/ 2018-09-14 07:06:06 -06:00
Gregory Nutt
c5edf40542 apps/examples/udpblaster: Add option to use poll() on output (only). Also picks up some fixes to various typographical errors. 2018-09-14 06:59:23 -06:00
anchao
b5cfd93444 apps/: Modification to build system: Unified application compilation rules 2018-09-03 09:29:56 -06:00
Gregory Nutt
3e396d8e4e apps/nshlib: Fix a copy paste error introduced in commit 9a42be5e9b 2018-09-02 15:33:22 -06:00
Gregory Nutt
9a42be5e9b apps/nshlib: When using waitpid() to wait for a built-in application or a file application to exit. Add the WUNTRACED options to so the the waitpid() call will also be awakened if the waited-for task is stopped as well. 2018-09-02 14:19:30 -06:00
Juha Niskanen
cef306e335 apps/nshlib/nsh_console.c: Do not dereference NULL 'pstate' 2018-08-29 06:18:30 -06:00
Gregory Nutt
c4512f5ddf apps/nshlib: Fix problem in last commit. CONFIG_BOARDCTL_FINALINIT=y is an insufficient condition for calling boardctl(BOARDIOC_FINALINIT, 0). Also need CONFIG_NSH_ARCHINIT=y. 2018-08-28 15:48:51 -06:00
ligd
93f1c13b62 apps/: Call BOARDIOC_FINALINIT after start-up script (or immediately after BOARIOC_INIT is there is no start-up script). 2018-08-28 15:44:03 -06:00
Gregory Nutt
bb4c5c49ef Replace usage of SIGKILL with SIGINIT 2018-08-28 12:02:26 -06:00
anchao
3c2396116d apps/nshlib/Kconfig: Move 'option modules' from NSH_FILE_APPS to BUILD_LOADABLE 2018-08-27 07:04:29 -06:00
ligd
d36e1c87fe apps/nshlib: Add control-C support for terminating built-in and exec'ed file tasks. 2018-08-26 07:48:38 -06:00
anchao
220653f21c Squashed commit of the following: 
Author: anchao <anchao@pinecone.net>

     apps/, most main() function: Correct CONFIG_BUILD_LOADABLE usage
     Loadable apps/: Correct loadable symbol table generate
     apps/system/ubloxmodem:  Fix build break
     apps/examples/ostest: start restart/waitpid/user test from main loop
     apps/nshlib:  Expand reboot and poweroff commands to include a second, optional mode argument

    Author: Gregory Nutt <gnutt@nuttx.org>

     An attempt to fix build issues.  Does not work.
     apps/examples/ostest:  Fix some inappropriate renaming of static functions introduced with recent patches.
     apps/builtin/exec_builtin.c:  Fix a error introduced by recent comments.  Found in build testing.

    Author: anchao <anchao@pinecone.net>

     apps/builtin/exec_builtin.c:  Try posix_spawn if builtin apps do not have have an entry point.
     apps/Application.mk: introduce MODULE config to simplify tristate(m)
     apps/nsh:  Change the nuttx shell module type to tristate
     apps:  Add loadable application support
     script/mksymtab:  Generate symbol table name by default
     apps/builtin:  Allow loadable applications can register with apps/builtin.
 2018-08-23 11:06:15 -06:00