/**************************************************************************** * apps/graphics/ft80x/ft80x.h * * Copyright (C) 2018 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ #ifndef __APPS_GRAPHICS_FT80X_FT80X_H #define __APPS_GRAPHICS_FT80X_FT80X_H /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #ifdef CONFIG_GRAPHICS_FT80X /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ /* NOTE: These rely on internal definitions from compiler.h and debug.h. * Could be a porting issue. */ #if !defined(CONFIG_GRAPHICS_FT80X_DEBUG_ERROR) # define ft80x_err _none #elif defined(CONFIG_CPP_HAVE_VARARGS) # define ft80x_err(format, ...) \ fprintf(stderr, EXTRA_FMT format EXTRA_ARG, ##__VA_ARGS__) #else # define ft80x_err printf #endif #if !defined(CONFIG_GRAPHICS_FT80X_DEBUG_WARN) # define ft80x_warn _none #elif defined(CONFIG_CPP_HAVE_VARARGS) # define ft80x_warn(format, ...) \ fprintf(stderr, EXTRA_FMT format EXTRA_ARG, ##__VA_ARGS__) #else # define ft80x_warn printf #endif #if !defined(CONFIG_GRAPHICS_FT80X_DEBUG_INFO) # define ft80x_info _none #elif defined(CONFIG_CPP_HAVE_VARARGS) # define ft80x_info(format, ...) \ printf(EXTRA_FMT format EXTRA_ARG, ##__VA_ARGS__) #else # define ft80x_info printf #endif #define FT80X_CMDFIFO_MASK (FT80X_CMDFIFO_SIZE - 1) /**************************************************************************** * Public Types ****************************************************************************/ /**************************************************************************** * Public Function Prototypes ****************************************************************************/ #ifdef __cplusplus #define EXTERN extern "C" extern "C" { #else #define EXTERN extern #endif struct ft80x_dlbuffer_s; /* Forward reference3 */ /**************************************************************************** * Name: ft80x_getreg8/16/32 * * Description: * Read an 8-, 16-, or 32-bit FT80x register value. * * Input Parameters: * fd - The file descriptor of the FT80x device. Opened by the caller * with write access. * addr - The 32-bit aligned, 22-bit register value * value - The location to return the register value * * Returned Value: * Zero (OK) on success. A negated errno value on failure. * ****************************************************************************/ int ft80x_getreg8(int fd, uint32_t addr, FAR uint8_t *value); int ft80x_getreg16(int fd, uint32_t addr, FAR uint16_t *value); int ft80x_getreg32(int fd, uint32_t addr, FAR uint32_t *value); /**************************************************************************** * Name: ft80x_getregs * * Description: * Read multiple 32-bit FT80x register values. * * Input Parameters: * fd - The file descriptor of the FT80x device. Opened by the caller * with write access. * addr - The 32-bit aligned, 22-bit start register address * nregs - The number of registers to read. * value - The location to return the register values * * Returned Value: * Zero (OK) on success. A negated errno value on failure. * ****************************************************************************/ int ft80x_getregs(int fd, uint32_t addr, uint8_t nregs, FAR uint32_t *value); /**************************************************************************** * Name: ft80x_putreg8/16/32 * * Description: * Wtite an 8-, 16-, or 32-bit FT80x register value. * * Input Parameters: * fd - The file descriptor of the FT80x device. Opened by the caller * with write access. * addr - The 32-bit aligned, 22-bit register value * value - The register value to write. * * Returned Value: * Zero (OK) on success. A negated errno value on failure. * ****************************************************************************/ int ft80x_putreg8(int fd, uint32_t addr, uint8_t value); int ft80x_putreg16(int fd, uint32_t addr, uint16_t value); int ft80x_putreg32(int fd, uint32_t addr, uint32_t value); /**************************************************************************** * Name: ft80x_putregs * * Description: * Write multiple 32-bit FT80x register values. * * Input Parameters: * fd - The file descriptor of the FT80x device. Opened by the caller * with write access. * addr - The 32-bit aligned, 22-bit start register address * nregs - The number of registers to write. * value - The of the register values to be written. * * Returned Value: * Zero (OK) on success. A negated errno value on failure. * ****************************************************************************/ int ft80x_putregs(int fd, uint32_t addr, uint8_t nregs, FAR const uint32_t *value); /**************************************************************************** * Name: ft80x_ramdl_rewind * * Description: * Reset to the start of RAM DL memory * * Input Parameters: * fd - The file descriptor of the FT80x device. Opened by the caller * with write access. * * Returned Value: * Zero (OK) on success. A negated errno value on failure. * ****************************************************************************/ int ft80x_ramdl_rewind(int fd); /**************************************************************************** * Name: ft80x_ramdl_append * * Description: * Append new display list data to RAM DL * * Input Parameters: * fd - The file descriptor of the FT80x device. Opened by the caller * with write access. * data - A pointer to the start of the data to be written. * len - The number of bytes to be written. * * Returned Value: * Zero (OK) on success. A negated errno value on failure. * ****************************************************************************/ int ft80x_ramdl_append(int fd, FAR const void *data, size_t len); /**************************************************************************** * Name: ft80x_ramcmd_append * * Description: * Append new display list data to RAM CMD * * Input Parameters: * fd - The file descriptor of the FT80x device. Opened by the caller * with write access. * data - A pointer to the start of the data to be append to RAM CMD. * len - The number of bytes to be appended. * * Returned Value: * Zero (OK) on success. A negated errno value on failure. * ****************************************************************************/ int ft80x_ramcmd_append(int fd, FAR const void *data, size_t len); /**************************************************************************** * Name: ft80x_ramcmd_freespace * * Description: * Return the free space in RAM CMD memory * * Input Parameters: * fd - The file descriptor of the FT80x device. Opened by the caller * with write access. * offset - Pointer to location to return the write offset to use if the * FIFO is not full. * avail - Pointer to location to return the FIFO free space * * Returned Value: * The (positive) number of free bytes in RAM CMD on success. A negated * errno value is returned on any failure. * ****************************************************************************/ uint16_t ft80x_ramcmd_freespace(int fd, FAR uint16_t *offset, FAR uint16_t *avail); /**************************************************************************** * Name: ft80x_ramcmd_waitfifoempty * * Description: * Wait until co processor completes the operation and the FIFO is again * empty. * * Input Parameters: * fd - The file descriptor of the FT80x device. Opened by the caller * with write access. * * Returned Value: * Zero (OK) on success. A negated errno value on failure. * ****************************************************************************/ int ft80x_ramcmd_waitfifoempty(int fd); /**************************************************************************** * Name: ft80x_dl_swap * * Description: * Perform the display swap operation. * * Input Parameters: * fd - The file descriptor of the FT80x device. Opened by the caller * with write access. * * Returned Value: * Zero (OK) on success. A negated errno value on failure. * ****************************************************************************/ int ft80x_dl_swap(int fd); #undef EXTERN #ifdef __cplusplus } #endif #endif /* CONFIG_GRAPHICS_FT80X */ #endif /* __APPS_GRAPHICS_FT80X_FT80X_H */