/**************************************************************************** * examples/fb/fb_main.c * * Copyright (C) 2017 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include /**************************************************************************** * Preprocessor Definitions ****************************************************************************/ #define NCOLORS 6 /**************************************************************************** * Private Types ****************************************************************************/ struct fb_state_s { int fd; struct fb_videoinfo_s vinfo; struct fb_planeinfo_s pinfo; FAR void *fbmem; }; /**************************************************************************** * Private Data ****************************************************************************/ static const char g_default_fbdev[] = CONFIG_EXAMPLES_FB_DEFAULTFB; /* Violet-Blue-Green-Yellow-Orange-Red */ static const uint32_t g_rgb24[NCOLORS] = { RGB24_VIOLET, RGB24_BLUE, RGB24_GREEN, RGB24_YELLOW, RGB24_ORANGE, RGB24_RED }; static const uint16_t g_rgb16[NCOLORS] = { RGB16_VIOLET, RGB16_BLUE, RGB16_GREEN, RGB16_YELLOW, RGB16_ORANGE, RGB16_RED }; static const uint8_t g_rgb8[NCOLORS] = { RGB8_VIOLET, RGB8_BLUE, RGB8_GREEN, RGB8_YELLOW, RGB8_ORANGE, RGB8_RED }; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * draw_rect ****************************************************************************/ static void draw_rect32(FAR struct fb_state_s *state, FAR struct nxgl_rect_s *rect, int color) { FAR uint32_t *dest; FAR uint8_t *row; int x; int y; row = (FAR uint8_t *)state->fbmem + state->pinfo.stride * rect->pt1.y; for (y = rect->pt1.y; y <= rect->pt2.y; y++) { dest = ((FAR uint32_t *)row) + rect->pt1.x; for (x = rect->pt1.x; x <= rect->pt2.x; x++) { *dest++ = g_rgb24[color]; } row += state->pinfo.stride; } } static void draw_rect16(FAR struct fb_state_s *state, FAR struct nxgl_rect_s *rect, int color) { FAR uint16_t *dest; FAR uint8_t *row; int x; int y; row = (FAR uint8_t *)state->fbmem + state->pinfo.stride * rect->pt1.y; for (y = rect->pt1.y; y <= rect->pt2.y; y++) { dest = ((FAR uint16_t *)row) + rect->pt1.x; for (x = rect->pt1.x; x <= rect->pt2.x; x++) { *dest++ = g_rgb16[color]; } row += state->pinfo.stride; } } static void draw_rect8(FAR struct fb_state_s *state, FAR struct nxgl_rect_s *rect, int color) { FAR uint8_t *dest; FAR uint8_t *row; int x; int y; row = (FAR uint8_t *)state->fbmem + state->pinfo.stride * rect->pt1.y; for (y = rect->pt1.y; y <= rect->pt2.y; y++) { dest = row + rect->pt1.x; for (x = rect->pt1.x; x <= rect->pt2.x; x++) { *dest++ = g_rgb8[color]; } row += state->pinfo.stride; } } static void draw_rect1(FAR struct fb_state_s *state, FAR struct nxgl_rect_s *rect, int color) { FAR uint8_t *pixel; FAR uint8_t *row; uint8_t color8 = (color & 1) == 0 ? 0 : 0xff; uint8_t lmask; uint8_t rmask; int startx; int endx; int x; int y; row = (FAR uint8_t *)state->fbmem + state->pinfo.stride * rect->pt1.y; startx = (rect->pt1.x >> 3); endx = (rect->pt2.x >> 3); lmask = 0xff << (8 - (rect->pt1.x & 7)); rmask = 0xff >> (rect->pt2.x & 7); for (y = rect->pt1.y; y <= rect->pt2.y; y++) { /* 'pixel' points to the 1st pixel the next row */ pixel = row + startx; /* Special case: The row is less no more than one byte wide */ if (startx == endx) { uint8_t mask = lmask | rmask; *pixel = (*pixel & mask) | (color8 & ~mask); } else { /* Special case the first byte of the row */ *pixel = (*pixel & lmask) | (color8 & ~lmask); pixel++; /* Handle all middle bytes */ for (x = startx + 1; x < endx; x++) { *pixel++ = color8; } /* Handle the final byte of the row */ *pixel = (*pixel & rmask) | (color8 & ~rmask); } row += state->pinfo.stride; } } static void draw_rect(FAR struct fb_state_s *state, FAR struct nxgl_rect_s *rect, int color) { #ifdef CONFIG_LCD_UPDATE int ret; #endif switch (state->pinfo.bpp) { case 32: draw_rect32(state, rect, color); break; case 16: draw_rect16(state, rect, color); break; case 8: default: draw_rect8(state, rect, color); break; case 1: draw_rect1(state, rect, color); break; } #ifdef CONFIG_LCD_UPDATE ret = ioctl(state->fd, FBIO_UPDATE, (unsigned long)((uintptr_t)rect)); if (ret < 0) { int errcode = errno; fprintf(stderr, "ERROR: ioctl(FBIO_UPDATE) failed: %d\n", errcode); } #endif } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * fb_main ****************************************************************************/ #ifdef CONFIG_BUILD_KERNEL int main(int argc, FAR char *argv[]) #else int fb_main(int argc, char *argv[]) #endif { FAR const char *fbdev = g_default_fbdev; struct fb_state_s state; struct nxgl_rect_s rect; int nsteps; int xstep; int ystep; int width; int height; int color; int x; int y; int ret; /* There is a single required argument: The path to the framebuffer * driver. */ if (argc == 2) { fbdev = argv[1]; } else if (argc != 1) { fprintf(stderr, "ERROR: Single argument required\n"); fprintf(stderr, "USAGE: %s []\n", argv[0]); return EXIT_FAILURE; } /* Open the framebuffer driver */ state.fd = open(fbdev, O_RDWR); if (state.fd < 0) { int errcode = errno; fprintf(stderr, "ERROR: Failed to open %s: %d\n", fbdev, errcode); return EXIT_FAILURE; } /* Get the characteristics of the framebuffer */ ret = ioctl(state.fd, FBIOGET_VIDEOINFO, (unsigned long)((uintptr_t)&state.vinfo)); if (ret < 0) { int errcode = errno; fprintf(stderr, "ERROR: ioctl(FBIOGET_VIDEOINFO) failed: %d\n", errcode); close(state.fd); return EXIT_FAILURE; } printf("VideoInfo:\n"); printf(" fmt: %u\n", state.vinfo.fmt); printf(" xres: %u\n", state.vinfo.xres); printf(" yres: %u\n", state.vinfo.yres); printf(" nplanes: %u\n", state.vinfo.nplanes); ret = ioctl(state.fd, FBIOGET_PLANEINFO, (unsigned long)((uintptr_t)&state.pinfo)); if (ret < 0) { int errcode = errno; fprintf(stderr, "ERROR: ioctl(FBIOGET_PLANEINFO) failed: %d\n", errcode); close(state.fd); return EXIT_FAILURE; } printf("PlaneInfo (plane 0):\n"); printf(" fbmem: %p\n", state.pinfo.fbmem); printf(" fblen: %lu\n", (unsigned long)state.pinfo.fblen); printf(" stride: %u\n", state.pinfo.stride); printf(" display: %u\n", state.pinfo.display); printf(" bpp: %u\n", state.pinfo.bpp); /* Only these pixel depths are supported. viinfo.fmt is ignored, only * certain color formats are supported. */ if (state.pinfo.bpp != 32 && state.pinfo.bpp != 16 && state.pinfo.bpp != 8 && state.pinfo.bpp != 1) { fprintf(stderr, "ERROR: bpp=%u not supported\n", state.pinfo.bpp); close(state.fd); return EXIT_FAILURE; } /* mmap() the framebuffer. * * NOTE: In the FLAT build the frame buffer address returned by the * FBIOGET_PLANEINFO IOCTL command will be the same as the framebuffer * address. mmap(), however, is the preferred way to get the framebuffer * address because in the KERNEL build, it will perform the necessary * address mapping to make the memory accessible to the application. */ state.fbmem = mmap(NULL, state.pinfo.fblen, PROT_READ|PROT_WRITE, MAP_SHARED|MAP_FILE, state.fd, 0); if (state.fbmem == MAP_FAILED) { int errcode = errno; fprintf(stderr, "ERROR: ioctl(FBIOGET_PLANEINFO) failed: %d\n", errcode); close(state.fd); return EXIT_FAILURE; } printf("Mapped FB: %p\n", state.fbmem); /* Draw some rectangles */ nsteps = 2 * (NCOLORS - 1) + 1; xstep = state.vinfo.xres / nsteps; ystep = state.vinfo.yres / nsteps; width = state.vinfo.xres; height = state.vinfo.yres; for (x = 0, y = 0, color = 0; color < NCOLORS; x += xstep, y += ystep, color++) { rect.pt1.x = x; rect.pt1.y = y; rect.pt2.x = x + width - 1; rect.pt2.y = y + height - 1; printf("%2d: (%3d,%3d) (%3d,%3d)\n", color, rect.pt1.x, rect.pt1.y, rect.pt2.x, rect.pt2.y); draw_rect(&state, &rect, color); width -= (2 * xstep); height -= (2 * ystep); } printf("Test finished\n"); munmap(state.fd, state.fbmem); close(state.fd); return EXIT_SUCCESS; }