/**************************************************************************** * examples/smp/smp_main.c * * Copyright (C) 2016 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ #define HOG_MSEC 1000 #define YIELD_MSEC 100 #define IMPOSSIBLE_CPU -1 /**************************************************************************** * Private Data ****************************************************************************/ static pthread_barrier_t g_smp_barrier; #if defined(CONFIG_SMP) && defined(CONFIG_BUILD_FLAT) static volatile int g_thread_cpu[CONFIG_EXAMPLES_SMP_NBARRIER_THREADS+1]; #endif /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: show_cpu / show_cpu_conditional * * Description: * This depends on internal OS interfaces that are not generally available * but can be accessed (albeit inappropriatley) in a FLAT build * ****************************************************************************/ #if defined(CONFIG_SMP) && defined(CONFIG_BUILD_FLAT) int up_cpu_index(void); static void show_cpu(FAR const char *caller, int threadno) { g_thread_cpu[threadno] = up_cpu_index(); printf("%s[%d]: Running on CPU%d\n", caller, threadno, g_thread_cpu[threadno]); } static void show_cpu_conditional(FAR const char *caller, int threadno) { int cpu = up_cpu_index(); if (cpu != g_thread_cpu[threadno]) { g_thread_cpu[threadno] = cpu; printf("%s[%d]: Now running on CPU%d\n", caller, threadno, cpu); } } #else # define show_cpu(c) # define show_cpu_conditional(c) #endif /**************************************************************************** * Name: hog_milliseconds * * Description: * Delay inline for the specified number of milliseconds. * ****************************************************************************/ static void hog_milliseconds(unsigned int milliseconds) { volatile unsigned int i; volatile unsigned int j; for (i = 0; i < milliseconds; i++) { for (j = 0; j < CONFIG_BOARD_LOOPSPERMSEC; j++) { } } } /**************************************************************************** * Name: hog_time * * Description: * Delay for awhile, calling pthread_yield() now and then to allow other * pthreads to get CPU time. * ****************************************************************************/ static void hog_time(FAR const char *caller, int threadno) { unsigned int remaining = HOG_MSEC; unsigned int hogmsec; while (remaining > 0) { /* Hog some CPU */ hogmsec = YIELD_MSEC; if (hogmsec > remaining) { hogmsec = remaining; } hog_milliseconds(hogmsec); remaining -= hogmsec; /* Let other threads run */ (void)pthread_yield(); show_cpu_conditional(caller, threadno); } } /**************************************************************************** * Name: barrier_thread ****************************************************************************/ static pthread_addr_t barrier_thread(pthread_addr_t parameter) { int threadno = (int)((intptr_t)parameter); int ret; printf("Thread[%d]: Started\n", threadno); show_cpu("Thread", threadno); /* Hog some CPU time */ hog_time("Thread", threadno); /* Wait at the barrier until all threads are synchronized. */ printf("Thread[%d]: Calling pthread_barrier_wait()\n", threadno); fflush(stdout); show_cpu_conditional("Thread", threadno); ret = pthread_barrier_wait(&g_smp_barrier); if (ret == 0) { printf("Thread[%d]: Back with ret=0 (I am not special)\n", threadno); } else if (ret == PTHREAD_BARRIER_SERIAL_THREAD) { printf("Thread[%d]: Back with " "ret=PTHREAD_BARRIER_SERIAL_THREAD (I AM SPECIAL)\n", threadno); } else { printf("Thread[%d]: ERROR could not get semaphore value\n", threadno); } fflush(stdout); show_cpu_conditional("Thread", threadno); /* Hog some more CPU time */ hog_time("Thread", threadno); /* Then exit */ printf("Thread[%d]: Done\n", threadno); fflush(stdout); show_cpu_conditional("Thread", threadno); return NULL; } /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * smp_main ****************************************************************************/ #ifdef CONFIG_BUILD_KERNEL int main(int argc, FAR char *argv[]) #else int smp_main(int argc, char *argv[]) #endif { pthread_t threadid[CONFIG_EXAMPLES_SMP_NBARRIER_THREADS]; pthread_addr_t result; pthread_attr_t attr; pthread_barrierattr_t barrierattr; int errcode = EXIT_SUCCESS; int ret; int i; /* Initialize data */ memset(threadid, 0, sizeof(pthread_t) * CONFIG_EXAMPLES_SMP_NBARRIER_THREADS); for (i = 0; i <= CONFIG_EXAMPLES_SMP_NBARRIER_THREADS; i++) { #if defined(CONFIG_SMP) && defined(CONFIG_BUILD_FLAT) g_thread_cpu[i] = IMPOSSIBLE_CPU; #endif if (i < CONFIG_EXAMPLES_SMP_NBARRIER_THREADS) { threadid[i] = 0; } } show_cpu(" Main", 0); printf(" Main[0]: Initializing barrier\n"); ret = pthread_barrierattr_init(&barrierattr); if (ret != OK) { printf(" Main[0]: pthread_barrierattr_init failed, ret=%d\n", ret); errcode = EXIT_FAILURE; goto errout; } ret = pthread_barrier_init(&g_smp_barrier, &barrierattr, CONFIG_EXAMPLES_SMP_NBARRIER_THREADS); if (ret != OK) { printf(" Main[0]: pthread_barrierattr_init failed, ret=%d\n", ret); errcode = EXIT_FAILURE; goto errout_with_attr; } /* Create the barrier */ (void)pthread_barrierattr_init(&barrierattr); /* Start CONFIG_EXAMPLES_SMP_NBARRIER_THREADS thread instances */ ret = pthread_attr_init(&attr); if (ret != OK) { printf(" Main[0]: pthread_attr_init failed, ret=%d\n", ret); errcode = EXIT_FAILURE; goto errout_with_barrier; } for (i = 0; i < CONFIG_EXAMPLES_SMP_NBARRIER_THREADS; i++) { ret = pthread_create(&threadid[i], &attr, barrier_thread, (pthread_addr_t)((uintptr_t)i+1)); if (ret != 0) { printf(" Main[0]: Error in thread %d create, ret=%d\n", i+1, ret); printf(" Main[0]: Test aborted with waiting threads\n"); errcode = EXIT_FAILURE; break; } else { printf(" Main[0]: Thread %d created\n", i+1); } show_cpu_conditional(" Main", 0); } fflush(stdout); show_cpu_conditional(" Main", 0); /* Wait for all thread instances to complete */ for (i = 0; i < CONFIG_EXAMPLES_SMP_NBARRIER_THREADS; i++) { if (threadid[i] != 0) { ret = pthread_join(threadid[i], &result); show_cpu_conditional(" Main", 0); if (ret != 0) { printf(" Main[0]: Error in thread %d join, ret=%d\n", i+1, ret); errcode = EXIT_FAILURE; } else { printf(" Main[0]: Thread %d completed with result=%p\n", i+1, result); } } } /* Destroy the barrier */ errout_with_barrier: ret = pthread_barrier_destroy(&g_smp_barrier); if (ret != OK) { printf(" Main[0]: pthread_barrier_destroy failed, ret=%d\n", ret); } errout_with_attr: ret = pthread_barrierattr_destroy(&barrierattr); if (ret != OK) { printf(" Main[0]: pthread_barrierattr_destroy failed, ret=%d\n", ret); } errout: fflush(stdout); show_cpu_conditional(" Main", 0); return errcode; }