/**************************************************************************** * apps/modbus/rtu/mbrtu_m.c * * FreeModbus Library: A portable Modbus implementation for Modbus ASCII/RTU. * Copyright (c) 2013 China Beijing Armink * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include "port.h" #include "modbus/mb.h" #include "modbus/mb_m.h" #include "mbrtu_m.h" #include "modbus/mbframe.h" #include "mbcrc.h" #include "modbus/mbport.h" #if defined(CONFIG_MB_RTU_MASTER) /**************************************************************************** * Included Files ****************************************************************************/ #define MB_SER_PDU_SIZE_MIN 4 /* Minimum size of a Modbus RTU * frame. */ #define MB_SER_PDU_SIZE_MAX 256 /* Maximum size of a Modbus RTU * frame. */ #define MB_SER_PDU_SIZE_CRC 2 /* Size of CRC field in PDU. */ #define MB_SER_PDU_ADDR_OFF 0 /* Offset of slave address in * Ser-PDU. */ #define MB_SER_PDU_PDU_OFF 1 /* Offset of Modbus-PDU in Ser-PDU. */ /**************************************************************************** * Private Type Definitions ****************************************************************************/ typedef enum { STATE_M_RX_INIT, /* Receiver is in initial state. */ STATE_M_RX_IDLE, /* Receiver is in idle state. */ STATE_M_RX_RCV, /* Frame is being received. */ STATE_M_RX_ERROR, /* If the frame is invalid. */ } eMBMasterRcvState; typedef enum { STATE_M_TX_IDLE, /* Transmitter is in idle state. */ STATE_M_TX_XMIT, /* Transmitter is in transfer state. */ STATE_M_TX_XFWR, /* Transmitter is in transfer finish and * wait receive state. */ } eMBMasterSndState; /**************************************************************************** * Private Data ****************************************************************************/ static volatile eMBMasterSndState eSndState; static volatile eMBMasterRcvState eRcvState; static volatile uint8_t ucMasterRTUSndBuf[MB_PDU_SIZE_MAX]; static volatile uint8_t ucMasterRTURcvBuf[MB_SER_PDU_SIZE_MAX]; static volatile uint16_t usMasterSendPDULength; static volatile uint8_t *pucMasterSndBufferCur; static volatile uint16_t usMasterSndBufferCount; static volatile uint16_t usMasterRcvBufferPos; static volatile bool xFrameIsBroadcast = false; static volatile eMBMasterTimerMode eMasterCurTimerMode; /**************************************************************************** * Public Functions ****************************************************************************/ eMBErrorCode eMBMasterRTUInit(uint8_t ucPort, speed_t ulBaudRate, eMBParity eParity) { eMBErrorCode eStatus = MB_ENOERR; speed_t usTimerT35_50us; ENTER_CRITICAL_SECTION(); /* Modbus RTU uses 8 Databits. */ if (xMBMasterPortSerialInit(ucPort, ulBaudRate, 8, eParity) != true) { eStatus = MB_EPORTERR; } else { /* If baudrate > 19200 then we should use the fixed timer values t35 = * 1750us. Otherwise t35 must be 3.5 times the character time. */ if (ulBaudRate > 19200) { usTimerT35_50us = 35; /* 1800us. */ } else { /* The timer reload value for a character is given by: ChTimeValue = * Ticks_per_1s / ( Baudrate / 11 ) = 11 * Ticks_per_1s / Baudrate = * 220000 / Baudrate The reload for t3.5 is 1.5 times this value and * similarly for t3.5. */ usTimerT35_50us = (7UL * 220000UL) / (2UL * ulBaudRate); } if (xMBMasterPortTimersInit((uint16_t) usTimerT35_50us) != true) { eStatus = MB_EPORTERR; } } EXIT_CRITICAL_SECTION(); return eStatus; } void eMBMasterRTUStart(void) { ENTER_CRITICAL_SECTION(); /* Initially the receiver is in the state STATE_M_RX_INIT. we start the timer * and if no character is received within t3.5 we change to STATE_M_RX_IDLE. * This makes sure that we delay startup of the modbus protocol stack until * the bus is free. */ eRcvState = STATE_M_RX_INIT; vMBMasterPortSerialEnable(true, false); vMBMasterPortTimersT35Enable(); EXIT_CRITICAL_SECTION(); } void eMBMasterRTUStop(void) { ENTER_CRITICAL_SECTION(); vMBMasterPortSerialEnable(false, false); vMBMasterPortTimersDisable(); EXIT_CRITICAL_SECTION(); } eMBErrorCode eMBMasterRTUReceive(uint8_t *pucRcvAddress, uint8_t **pucFrame, uint16_t *pusLength) { eMBErrorCode eStatus = MB_ENOERR; ENTER_CRITICAL_SECTION(); DEBUGASSERT(usMasterRcvBufferPos < MB_SER_PDU_SIZE_MAX); /* Length and CRC check */ if ((usMasterRcvBufferPos >= MB_SER_PDU_SIZE_MIN) && (usMBCRC16((uint8_t *) ucMasterRTURcvBuf, usMasterRcvBufferPos) == 0)) { /* Save the address field. All frames are passed to the upper laid and * the decision if a frame is used is done there. */ *pucRcvAddress = ucMasterRTURcvBuf[MB_SER_PDU_ADDR_OFF]; /* Total length of Modbus-PDU is Modbus-Serial-Line-PDU minus size of * address field and CRC checksum. */ *pusLength = (uint16_t) (usMasterRcvBufferPos - MB_SER_PDU_PDU_OFF - MB_SER_PDU_SIZE_CRC); /* Return the start of the Modbus PDU to the caller. */ *pucFrame = (uint8_t *) & ucMasterRTURcvBuf[MB_SER_PDU_PDU_OFF]; } else { eStatus = MB_EIO; } EXIT_CRITICAL_SECTION(); return eStatus; } eMBErrorCode eMBMasterRTUSend(uint8_t ucSlaveAddress, const uint8_t *pucFrame, uint16_t usLength) { eMBErrorCode eStatus = MB_ENOERR; uint16_t usCRC16; if (ucSlaveAddress > CONFIG_MB_MASTER_TOTAL_SLAVE_NUM) { return MB_EINVAL; } ENTER_CRITICAL_SECTION(); /* Check if the receiver is still in idle state. If not we where to slow with * processing the received frame and the master sent another frame on the * network. We have to abort sending the frame. */ if (eRcvState == STATE_M_RX_IDLE) { /* First byte before the Modbus-PDU is the slave address. */ pucMasterSndBufferCur = (uint8_t *) pucFrame - 1; usMasterSndBufferCount = 1; /* Now copy the Modbus-PDU into the Modbus-Serial-Line-PDU. */ pucMasterSndBufferCur[MB_SER_PDU_ADDR_OFF] = ucSlaveAddress; usMasterSndBufferCount += usLength; /* Calculate CRC16 checksum for Modbus-Serial-Line-PDU. */ usCRC16 = usMBCRC16((uint8_t *) pucMasterSndBufferCur, usMasterSndBufferCount); ucMasterRTUSndBuf[usMasterSndBufferCount++] = (uint8_t) (usCRC16 & 0xFF); ucMasterRTUSndBuf[usMasterSndBufferCount++] = (uint8_t) (usCRC16 >> 8); /* Activate the transmitter. */ eSndState = STATE_M_TX_XMIT; vMBMasterPortSerialEnable(false, true); } else { eStatus = MB_EIO; } EXIT_CRITICAL_SECTION(); return eStatus; } bool xMBMasterRTUReceiveFSM(void) { bool xTaskNeedSwitch = false; uint8_t ucByte; DEBUGASSERT((eSndState == STATE_M_TX_IDLE) || (eSndState == STATE_M_TX_XFWR)); /* Always read the character. */ xMBMasterPortSerialGetByte((uint8_t *) & ucByte); switch (eRcvState) { /* If we have received a character in the init state we have to wait * until the frame is finished. */ case STATE_M_RX_INIT: vMBMasterPortTimersT35Enable(); break; /* In the error state we wait until all characters in the damaged frame * are transmitted. */ case STATE_M_RX_ERROR: vMBMasterPortTimersT35Enable(); break; /* In the idle state we wait for a new character. If a character is * received the t1.5 and t3.5 timers are started and the receiver is in * the state STATE_RX_RECEIVCE and disable early the timer of respond * timeout. */ case STATE_M_RX_IDLE: /* In time of respond timeout,the receiver receive a frame. Disable timer * of respond timeout and change the transmitter state to idle. */ vMBMasterPortTimersDisable(); eSndState = STATE_M_TX_IDLE; usMasterRcvBufferPos = 0; ucMasterRTURcvBuf[usMasterRcvBufferPos++] = ucByte; eRcvState = STATE_M_RX_RCV; /* Enable t3.5 timers. */ vMBMasterPortTimersT35Enable(); break; /* We are currently receiving a frame. Reset the timer after every * character received. If more than the maximum possible number of bytes * in a modbus frame is received the frame is ignored. */ case STATE_M_RX_RCV: if (usMasterRcvBufferPos < MB_SER_PDU_SIZE_MAX) { ucMasterRTURcvBuf[usMasterRcvBufferPos++] = ucByte; } else { eRcvState = STATE_M_RX_ERROR; } vMBMasterPortTimersT35Enable(); break; } return xTaskNeedSwitch; } bool xMBMasterRTUTransmitFSM(void) { bool xNeedPoll = false; DEBUGASSERT(eRcvState == STATE_M_RX_IDLE); switch (eSndState) { /* We should not get a transmitter event if the transmitter is in idle * state. */ case STATE_M_TX_IDLE: /* enable receiver/disable transmitter. */ vMBMasterPortSerialEnable(true, false); break; case STATE_M_TX_XMIT: /* check if we are finished. */ if (usMasterSndBufferCount != 0) { xMBMasterPortSerialPutByte((uint8_t) * pucMasterSndBufferCur); pucMasterSndBufferCur++; /* next byte in sendbuffer. */ usMasterSndBufferCount--; } else { xFrameIsBroadcast = (ucMasterRTUSndBuf[MB_SER_PDU_ADDR_OFF] == MB_ADDRESS_BROADCAST) ? true : false; /* Disable transmitter. This prevents another transmit buffer empty * interrupt. */ vMBMasterPortSerialEnable(true, false); eSndState = STATE_M_TX_XFWR; /* If the frame is broadcast ,master will enable timer of convert * delay, else master will enable timer of respond timeout. */ if (xFrameIsBroadcast == true) { vMBMasterPortTimersConvertDelayEnable(); } else { vMBMasterPortTimersRespondTimeoutEnable(); } } break; } return xNeedPoll; } bool xMBMasterRTUTimerExpired(void) { bool xNeedPoll = false; switch (eRcvState) { /* Timer t35 expired. Startup phase is finished. */ case STATE_M_RX_INIT: xNeedPoll = xMBMasterPortEventPost(EV_MASTER_READY); break; /* A frame was received and t35 expired. Notify the listener that a new * frame was received. */ case STATE_M_RX_RCV: xNeedPoll = xMBMasterPortEventPost(EV_MASTER_FRAME_RECEIVED); break; /* An error occurred while receiving the frame. */ case STATE_M_RX_ERROR: vMBMasterSetErrorType(EV_ERROR_RECEIVE_DATA); xNeedPoll = xMBMasterPortEventPost(EV_MASTER_ERROR_PROCESS); break; /* Function called in an illegal state. */ default: DEBUGASSERT((eRcvState == STATE_M_RX_INIT) || (eRcvState == STATE_M_RX_RCV) || (eRcvState == STATE_M_RX_ERROR) || (eRcvState == STATE_M_RX_IDLE)); break; } eRcvState = STATE_M_RX_IDLE; switch (eSndState) { /* A frame was send finish and convert delay or respond timeout expired. * If the frame is broadcast,The master will idle,and if the frame is not * broadcast.Notify the listener process error. */ case STATE_M_TX_XFWR: if (xFrameIsBroadcast == false) { vMBMasterSetErrorType(EV_ERROR_RESPOND_TIMEOUT); xNeedPoll = xMBMasterPortEventPost(EV_MASTER_ERROR_PROCESS); } break; /* Function called in an illegal state. */ default: DEBUGASSERT((eSndState == STATE_M_TX_XFWR) || (eSndState == STATE_M_TX_IDLE)); break; } eSndState = STATE_M_TX_IDLE; vMBMasterPortTimersDisable(); /* If timer mode is convert delay, the master event then turns * EV_MASTER_EXECUTE status. */ if (eMasterCurTimerMode == MB_TMODE_CONVERT_DELAY) { xNeedPoll = xMBMasterPortEventPost(EV_MASTER_EXECUTE); } return xNeedPoll; } /* Get Modbus Master send RTU's buffer address pointer.*/ void vMBMasterGetRTUSndBuf(uint8_t **pucFrame) { *pucFrame = (uint8_t *) ucMasterRTUSndBuf; } /* Get Modbus Master send PDU's buffer address pointer.*/ void vMBMasterGetPDUSndBuf(uint8_t **pucFrame) { *pucFrame = (uint8_t *) & ucMasterRTUSndBuf[MB_SER_PDU_PDU_OFF]; } /* Set Modbus Master send PDU's buffer length.*/ void vMBMasterSetPDUSndLength(uint16_t SendPDULength) { usMasterSendPDULength = SendPDULength; } /* Get Modbus Master send PDU's buffer length.*/ uint16_t usMBMasterGetPDUSndLength(void) { return usMasterSendPDULength; } /* Set Modbus Master current timer mode.*/ void vMBMasterSetCurTimerMode(eMBMasterTimerMode eMBTimerMode) { eMasterCurTimerMode = eMBTimerMode; } /* The master request is broadcast? */ bool xMBMasterRequestIsBroadcast(void) { return xFrameIsBroadcast; } #endif