#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#

config EXAMPLES_BRIDGE
	tristate "UDP bridge example"
	default n
	depends on NET_UDP && !NET_IPv6
	---help---
		Simple test of a system with multiple networks.  It simply echoes all
		UDP packets received on network 1 and network 2 to network 2 and
		network 1, respectively.  Interface 1 and interface may or may not
		lie on the same network.

		If used as a NSH add-on, then it is assumed that initialization of
		both networks was performed externally prior to the time that this
		test was started.

if EXAMPLES_BRIDGE

comment "Network 1 configuration"

config EXAMPLES_BRIDGE_NET1_IFNAME
	string "Device name"
	default "eth0"
	---help---
		The register name of the network 1 device.  Must match the previously
		registered driver name and must not be the same as
		EXAMPLES_BRIDGE_NET2_IFNAME

config EXAMPLES_BRIDGE_NET1_RECVPORT
	int "UDP receive port"
	default 5471
	---help---
		Network 1 listen port number

config EXAMPLES_BRIDGE_NET1_IOBUFIZE
	int "UDP I/O buffer size"
	default 1024
	---help---
		Size of the UDP send/receive I/O buffer

if !NSH_NETINIT

config EXAMPLES_BRIDGE_NET1_DHCPC
	bool "DHCP Client"
	default n
	select NETUTILS_DHCPC
	select NETDB_DNSCLIENT

config EXAMPLES_BRIDGE_NET1_NOMAC
	bool "Use Canned MAC Address"
	default n
	---help---
		Select if the hardware has no built-in MAC address.

config EXAMPLES_BRIDGE_NET1_MACADDR
	hex "Canned MAC address"
	default 0x00e0deadbeef
	depends on EXAMPLES_BRIDGE_NET1_NOMAC
	---help---
		If the hardware has no built-in MAC address then the fixed,
		software-assigned MAC address MAC address must provided
		with this selection.

config EXAMPLES_BRIDGE_NET1_IPADDR
	hex "IP address"
	default 0x0a000002
	depends on !EXAMPLES_BRIDGE_NET1_DHCPC
	---help---
		IP address of network 1 for the target

config EXAMPLES_BRIDGE_NET1_DRIPADDR
	hex "Default Router IP address (Gateway)"
	default 0x0a000001

config EXAMPLES_BRIDGE_NET1_NETMASK
	hex "Network Mask"
	default 0xffffff00

endif # !NSH_NETINIT

config EXAMPLES_BRIDGE_NET1_IPHOST
	hex "Host IP address"
	default 0x0a000001
	---help---
		IP address of network 1 for the host

config EXAMPLES_BRIDGE_NET1_HOSTPORT
	int "Host listen port"
	default 5472
	---help---
		Port number used by the host on network 1

config EXAMPLES_BRIDGE_NET1_STACKSIZE
	int "Network 1 daemon stacksize"
	default DEFAULT_TASK_STACKSIZE

config EXAMPLES_BRIDGE_NET1_PRIORITY
	int "Network 1 daemon task priority"
	default 100

comment "Network 2 configuration"

config EXAMPLES_BRIDGE_NET2_IFNAME
	string "Device name"
	default "eth1"
	---help---
		The register name of the network 2 device.  Must match the previously
		registered driver name and must not be the same as
		EXAMPLES_BRIDGE_NET2_IFNAME

config EXAMPLES_BRIDGE_NET2_RECVPORT
	int "UDP receive port"
	default 5473
	---help---
		Network 1 listen port number

config EXAMPLES_BRIDGE_NET2_IOBUFIZE
	int "UDP I/O buffer size"
	default 1024
	---help---
		Size of the UDP send/receive I/O buffer

if !NSH_NETINIT

config EXAMPLES_BRIDGE_NET2_DHCPC
	bool "DHCP Client"
	default n
	select NETUTILS_DHCPC
	select NETDB_DNSCLIENT

config EXAMPLES_BRIDGE_NET2_NOMAC
	bool "Use Canned MAC Address"
	default n
	---help---
		Select if the hardware has no built-in MAC address.

config EXAMPLES_BRIDGE_NET2_MACADDR
	hex "Canned MAC address"
	default 0x00e0f00dface
	depends on EXAMPLES_BRIDGE_NET2_NOMAC
	---help---
		If the hardware has no built-in MAC address then the fixed,
		software-assigned MAC address MAC address must provided
		with this selection.

config EXAMPLES_BRIDGE_NET2_IPADDR
	hex "IP address"
	default 0x0a000003
	depends on !EXAMPLES_BRIDGE_NET2_DHCPC
	---help---
		IP address of network 2 for the target

config EXAMPLES_BRIDGE_NET2_DRIPADDR
	hex "Default Router IP address (Gateway)"
	default 0x0a000001

config EXAMPLES_BRIDGE_NET2_NETMASK
	hex "Network Mask"
	default 0xffffff00

endif # !NSH_NETINIT

config EXAMPLES_BRIDGE_NET2_IPHOST
	hex "Host IP address"
	default 0x0a000001
	---help---
		IP address of network 2 for the host

config EXAMPLES_BRIDGE_NET2_HOSTPORT
	int "Host listen port"
	default 5474
	---help---
		Port number used by the host on network 2

config EXAMPLES_BRIDGE_NET2_STACKSIZE
	int "Network 2 daemon stacksize"
	default DEFAULT_TASK_STACKSIZE

config EXAMPLES_BRIDGE_NET2_PRIORITY
	int "Network 2 daemon task priority"
	default 100

endif # EXAMPLES_BRIDGE