#
# For a description of the syntax of this configuration file,
# see the file kconfig-language.txt in the NuttX tools repository.
#

config EXAMPLES_NETTEST
	tristate "Network test example"
	default n
	depends on NET_TCP
	depends on NET_SOCKOPTS
	---help---
		Enable the network test example

if EXAMPLES_NETTEST

config EXAMPLES_NETTEST_SENDSIZE
	int "Payload size"
	default 4096
	---help---
		The test client sends well-known packets to ther server.  The server
		will receive and verfity those packets.  This setting determines
		size of each packet.

config EXAMPLES_NETTEST_PROGNAME1
	string "Target1 program name"
	default "nettest"
	depends on BUILD_LOADABLE
	---help---
		This is the name of the program that will be use when the Nettest
		program is installed.

config EXAMPLES_NETTEST_STACKSIZE1
	int "Target1 stack size"
	default 2048

config EXAMPLES_NETTEST_PRIORITY1
	int "Target1 priority"
	default 100

config EXAMPLES_NETTEST_LOOPBACK
	bool "Loopback test"
	default n
	depends on NET_LOOPBACK || IEEE802154_LOOPBACK || PKTRADIO_LOOPBACK
	---help---
		Perform the test using the local loopback device.  In this case,
		both the client and the server reside on the target.

# No server if loopback; No second target if loopback

if !EXAMPLES_NETTEST_LOOPBACK

config EXAMPLES_NETTEST_SERVER1
	bool "Target1 is server"
	default n
	depends on !EXAMPLES_NETTEST_LOOPBACK
	---help---
		Select to use the host as the client side of the test.  Default:  The
		target is the client side of the test

config EXAMPLES_NETTEST_TARGET2
	bool "Second endpoint is a target"
	default n
	---help---
		By default, the host PC is configured as the second endpoint of the
		NETTEST.  If this option is selected, then the second endpoint
		will be built into the FLASH image as well.  This means that you
		can use two target boards to run the test with no host PC
		involvement.

if EXAMPLES_NETTEST_TARGET2

config EXAMPLES_NETTEST_PROGNAME2
	string "Target2 program name"
	default "tcpserver" if !EXAMPLES_NETTEST_SERVER2
	default "tcpclient" if EXAMPLES_NETTEST_SERVER2
	depends on BUILD_LOADABLE
	---help---
		This is the name of the Target2 program that will be use when the
		NSH ELF program is installed.

config EXAMPLES_NETTEST_PRIORITY2
	int "Target2 task priority"
	default 100

config EXAMPLES_NETTEST_STACKSIZE2
	int "Target2 stack size"
	default 2048

endif # EXAMPLES_NETTEST_TARGET2
endif # !EXAMPLES_NETTEST_LOOPBACK

if EXAMPLES_NETTEST_LOOPBACK
config EXAMPLES_NETTEST_DAEMON_STACKSIZE
	int "Server daemon stack size"
	default 2048

config EXAMPLES_NETTEST_DAEMON_PRIORITY
	int "Server daemon priority"
	default 100
#endif

endif # EXAMPLES_NETTEST_LOOPBACK

config EXAMPLES_NETTEST_DEVNAME
	string "Network device"
	default "eth0"

config EXAMPLES_NETTEST_PERFORMANCE
	bool "Test for Performance"
	default n
	---help---
		Configure the example to test for network performance.  Default:  Test
		is for network functionality.

choice
	prompt "IP Domain"
	default EXAMPLES_NETTEST_IPv4 if NET_IPv4
	default EXAMPLES_NETTEST_IPv6 if NET_IPv6 && !NET_IPv4

config EXAMPLES_NETTEST_IPv4
	bool "IPv4"
	depends on NET_IPv4

config EXAMPLES_NETTEST_IPv6
	bool "IPv6"
	depends on NET_IPv6

endchoice # IP Domain

# No hardware initialization if loopback

config EXAMPLES_NETTEST_INIT
	bool "Initialize network"
	default n if NSH_BUILTIN_APPS
	default y if !NSH_BUILTIN_APPS
	depends on !BUILD_LOADABLE && !EXAMPLES_NETTEST_LOOPBACK
	---help---
		Include logic to initialize the network.  This should not be done if
		the network is already initialized when nettest runs.  This is
		usually the case, for example, when nettest is run as an NSH built-
		in task.

config EXAMPLES_NETTEST_NOMAC
	bool "Use Canned MAC Address"
	default n
	depends on EXAMPLES_NETTEST_INIT

if EXAMPLES_NETTEST_IPv4

comment "IPv4 addresses"

if EXAMPLES_NETTEST_INIT

config EXAMPLES_NETTEST_IPADDR
	hex "Target IP address"
	default 0x0a000002

config EXAMPLES_NETTEST_DRIPADDR
	hex "Default Router IP address (Gateway)"
	default 0x0a000001

config EXAMPLES_NETTEST_NETMASK
	hex "Network Mask"
	default 0xffffff00

endif # EXAMPLES_NETTEST_INIT

# No server if loopback

if !EXAMPLES_NETTEST_LOOPBACK

config EXAMPLES_NETTEST_SERVERIP
	hex "Server IP Address"
	default 0x0a000001 if !EXAMPLES_NETTEST_SERVER
	default 0x0a000002 if EXAMPLES_NETTEST_SERVER
	---help---
		IP address of the server.  If the target is the server, then
		EXAMPLES_NETTEST_SERVERIP should be the same as
		EXAMPLES_NETTEST_IPADDR (default).  If the target is the client,
		then the default value of EXAMPLES_NETTEST_SERVERIP is set to the
		host PC IP address (possibly the gateway address,
		EXAMPLES_NETTEST_DRIPADDR?).

endif # !EXAMPLES_NETTEST_LOOPBACK
endif # EXAMPLES_NETTEST_IPv4

if EXAMPLES_NETTEST_IPv6
if !NET_ICMPv6_AUTOCONF

comment "Target IPv6 address"

if EXAMPLES_NETTEST_INIT

config EXAMPLES_NETTEST_IPv6ADDR_1
	hex "[0]"
	default 0xfc00
	range 0x0 0xffff
	---help---
		Target IPv6 address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the first of the 8-values.  The
		default for all eight values is fc00::2.

config EXAMPLES_NETTEST_IPv6ADDR_2
	hex "[1]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Target IPv6 address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the second of the 8-values.  The
		default for all eight values is fc00::2.

config EXAMPLES_NETTEST_IPv6ADDR_3
	hex "[2]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Target IPv6 address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the third of the 8-values.  The
		default for all eight values is fc00::2.

config EXAMPLES_NETTEST_IPv6ADDR_4
	hex "[3]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Target IPv6 address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the fourth of the 8-values.  The
		default for all eight values is fc00::2.

config EXAMPLES_NETTEST_IPv6ADDR_5
	hex "[4]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Target IPv6 address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the fifth of the 8-values.  The
		default for all eight values is fc00::2.

config EXAMPLES_NETTEST_IPv6ADDR_6
	hex "[5]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Target IPv6 address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the sixth of the 8-values.  The
		default for all eight values is fc00::2.

config EXAMPLES_NETTEST_IPv6ADDR_7
	hex "[6]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Target IPv6 address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the seventh of the 8-values.  The
		default for all eight values is fc00::2.

config EXAMPLES_NETTEST_IPv6ADDR_8
	hex "[7]"
	default 0x0002
	range 0x0 0xffff
	---help---
		Target IPv6 address.  This is a 16-bit integer value in host order.
		Each of the eight values forming the full IP address must be
		specified individually.  This is the last of the 8-values.  The
		default for all eight values is fc00::2.

comment "Router IPv6 address"

config EXAMPLES_NETTEST_DRIPv6ADDR_1
	hex "[0]"
	default 0xfc00
	range 0x0 0xffff
	---help---
		Default router IP address (aka, Gateway).  This is a 16-bit integer
		value in host order.  Each of the eight values forming the full IP
		address must be specified individually.  This is the first of the
		8-values.  The default for all eight values is fc00::1.

config EXAMPLES_NETTEST_DRIPv6ADDR_2
	hex "[1]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Default router IP address (aka, Gateway).  This is a 16-bit integer
		value in host order.  Each of the eight values forming the full IP
		address must be specified individually.  This is the second of the
		8-values.  The default for all eight values is fc00::1.

config EXAMPLES_NETTEST_DRIPv6ADDR_3
	hex "[2]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Default router IP address (aka, Gateway).  This is a 16-bit integer
		value in host order.  Each of the eight values forming the full IP
		address must be specified individually.  This is the third of the
		8-values.  The default for all eight values is fc00::1.

config EXAMPLES_NETTEST_DRIPv6ADDR_4
	hex "[3]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Default router IP address (aka, Gateway).  This is a 16-bit integer
		value in host order.  Each of the eight values forming the full IP
		address must be specified individually.  This is the fourth of the
		8-values.  The default for all eight values is fc00::1.

config EXAMPLES_NETTEST_DRIPv6ADDR_5
	hex "[4]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Default router IP address (aka, Gateway).  This is a 16-bit integer
		value in host order.  Each of the eight values forming the full IP
		address must be specified individually.  This is the fifth of the
		8-values.  The default for all eight values is fc00::1.

config EXAMPLES_NETTEST_DRIPv6ADDR_6
	hex "[5]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Default router IP address (aka, Gateway).  This is a 16-bit integer
		value in host order.  Each of the eight values forming the full IP
		address must be specified individually.  This is the sixth of the
		8-values.  The default for all eight values is fc00::1.

config EXAMPLES_NETTEST_DRIPv6ADDR_7
	hex "[6]"
	default 0x0000
	range 0x0 0xffff
	---help---
		Default router IP address (aka, Gateway).  This is a 16-bit integer
		value in host order.  Each of the eight values forming the full IP
		address must be specified individually.  This is the seventh of the
		8-values.  The default for all eight values is fc00::1.

config EXAMPLES_NETTEST_DRIPv6ADDR_8
	hex "[7]"
	default 0x0001
	range 0x0 0xffff
	---help---
		Default router IP address (aka, Gateway).  This is a 16-bit integer
		value in host order.  Each of the eight values forming the full IP
		address must be specified individually.  This is the last of the
		8-values.  The default for all eight values is fc00::1.

comment "IPv6 Network mask"

config EXAMPLES_NETTEST_IPv6NETMASK_1
	hex "[0]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the first of the 8-values.  The default for
		all eight values is fe00::0.

config EXAMPLES_NETTEST_IPv6NETMASK_2
	hex "[1]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the second of the 8-values.  The default for
		all eight values is fe00::0.

config EXAMPLES_NETTEST_IPv6NETMASK_3
	hex "[2]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the third of the 8-values.  The default for
		all eight values is fe00::0.

config EXAMPLES_NETTEST_IPv6NETMASK_4
	hex "[3]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the fourth of the 8-values.  The default for
		all eight values is fe00::0.

config EXAMPLES_NETTEST_IPv6NETMASK_5
	hex "[4]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the fifth of the 8-values.  The default for
		all eight values is fe00::0.

config EXAMPLES_NETTEST_IPv6NETMASK_6
	hex "[5]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the sixth of the 8-values.  The default for
		all eight values is fe00::0.

config EXAMPLES_NETTEST_IPv6NETMASK_7
	hex "[6]"
	default 0xffff
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the seventh of the 8-values.  The default for
		all eight values is fe00::0.

config EXAMPLES_NETTEST_IPv6NETMASK_8
	hex "[7]"
	default 0xff80
	range 0x0 0xffff
	---help---
		Network mask.  This is a 16-bit integer value in host order.  Each
		of the eight values forming the full IP address must be specified
		individually.  This is the eighth of the 8-values.  The default for
		all eight values is fe00::0.

endif # NET_ICMPv6_AUTOCONF
endif # EXAMPLES_NETTEST_INIT

# Addresses are well known if loopback is used.

if !EXAMPLES_NETTEST_LOOPBACK || !NET_LOOPBACK

comment "Server IPv6 address"

config EXAMPLES_NETTEST_SERVERIPv6ADDR_1
	hex "[0]"
	default 0xfc00
	range 0x0 0xffff
	---help---
		IP address of the server.  If the target is the server, then
		EXAMPLES_NETTEST_SERVERIP should be the same as
		EXAMPLES_NETTEST_IPADDR (default).  If the target is the cleint,
		then the default value of EXAMPLES_NETTEST_SERVERIP is set to the
		host PC IP address (possibly the gateway address,
		EXAMPLES_NETTEST_DRIPADDR?).

		This is a 16-bit integer value in host order. Each of the eight
		values forming the full IP address must be specified individually.
		This is the first of the 8-values.

config EXAMPLES_NETTEST_SERVERIPv6ADDR_2
	hex "[1]"
	default 0x0000
	range 0x0 0xffff
	---help---
		IP address of the server.  If the target is the server, then
		EXAMPLES_NETTEST_SERVERIP should be the same as
		EXAMPLES_NETTEST_IPADDR (default).  If the target is the client,
		then the default value of EXAMPLES_NETTEST_SERVERIP is set to the
		host PC IP address (possibly the gateway address,
		EXAMPLES_NETTEST_DRIPADDR?).

		This is a 16-bit integer value in host order. Each of the eight
		values forming the full IP address must be specified individually.
		This is the second of the 8-values.

config EXAMPLES_NETTEST_SERVERIPv6ADDR_3
	hex "[2]"
	default 0x0000
	range 0x0 0xffff
	---help---
		IP address of the server.  If the target is the server, then
		EXAMPLES_NETTEST_SERVERIP should be the same as
		EXAMPLES_NETTEST_IPADDR (default).  If the target is the client,
		then the default value of EXAMPLES_NETTEST_SERVERIP is set to the
		host PC IP address (possibly the gateway address,
		EXAMPLES_NETTEST_DRIPADDR?).

		This is a 16-bit integer value in host order. Each of the eight
		values forming the full IP address must be specified individually.
		This is the Third of the 8-values.

config EXAMPLES_NETTEST_SERVERIPv6ADDR_4
	hex "[3]"
	default 0x0000
	range 0x0 0xffff
	---help---
		IP address of the server.  If the target is the server, then
		EXAMPLES_NETTEST_SERVERIP should be the same as
		EXAMPLES_NETTEST_IPADDR (default).  If the target is the client,
		then the default value of EXAMPLES_NETTEST_SERVERIP is set to the
		host PC IP address (possibly the gateway address,
		EXAMPLES_NETTEST_DRIPADDR?).

		This is a 16-bit integer value in host order. Each of the eight
		values forming the full IP address must be specified individually.
		This is the fourth of the 8-values.

config EXAMPLES_NETTEST_SERVERIPv6ADDR_5
	hex "[4]"
	default 0x0000
	range 0x0 0xffff
	---help---
		IP address of the server.  If the target is the server, then
		EXAMPLES_NETTEST_SERVERIP should be the same as
		EXAMPLES_NETTEST_IPADDR (default).  If the target is the client,
		then the default value of EXAMPLES_NETTEST_SERVERIP is set to the
		host PC IP address (possibly the gateway address,
		EXAMPLES_NETTEST_DRIPADDR?).

		This is a 16-bit integer value in host order. Each of the eight
		values forming the full IP address must be specified individually.
		This is the fifth of the 8-values.

config EXAMPLES_NETTEST_SERVERIPv6ADDR_6
	hex "[5]"
	default 0x0000
	range 0x0 0xffff
	---help---
		IP address of the server.  If the target is the server, then
		EXAMPLES_NETTEST_SERVERIP should be the same as
		EXAMPLES_NETTEST_IPADDR (default).  If the target is the client,
		then the default value of EXAMPLES_NETTEST_SERVERIP is set to the
		host PC IP address (possibly the gateway address,
		EXAMPLES_NETTEST_DRIPADDR?).

		This is a 16-bit integer value in host order. Each of the eight
		values forming the full IP address must be specified individually.
		This is the sixth of the 8-values.

config EXAMPLES_NETTEST_SERVERIPv6ADDR_7
	hex "[6]"
	default 0x0000
	range 0x0 0xffff
	---help---
		IP address of the server.  If the target is the server, then
		EXAMPLES_NETTEST_SERVERIP should be the same as
		EXAMPLES_NETTEST_IPADDR (default).  If the target is the client,
		then the default value of EXAMPLES_NETTEST_SERVERIP is set to the
		host PC IP address (possibly the gateway address,
		EXAMPLES_NETTEST_DRIPADDR?).

		This is a 16-bit integer value in host order. Each of the eight
		values forming the full IP address must be specified individually.
		This is the seventh of the 8-values.

config EXAMPLES_NETTEST_SERVERIPv6ADDR_8
	hex "[7]"
	default 0x0001 if !EXAMPLES_NETTEST_SERVER
	default 0x0002 if EXAMPLES_NETTEST_SERVER
	range 0x0 0xffff
	---help---
		IP address of the server.  If the target is the server, then
		EXAMPLES_NETTEST_SERVERIP should be the same as
		EXAMPLES_NETTEST_IPADDR (default).  If the target is the client,
		then the default value of EXAMPLES_NETTEST_SERVERIP is set to the
		host PC IP address (possibly the gateway address,
		EXAMPLES_NETTEST_DRIPADDR?).

		This is a 16-bit integer value in host order. Each of the eight
		values forming the full IP address must be specified individually.
		This is the last of the 8-values.

endif # !EXAMPLES_NETTEST_LOOPBACK
endif # EXAMPLES_NETTEST_IPv6

config EXAMPLES_NETTEST_SERVER_PORTNO
	int "Server port number"
	default 5471

endif # EXAMPLES_NETTEST