/**************************************************************************** * examples/nxlines/nxlines_bkgd.c * * Copyright (C) 2011-2012, 2015 Gregory Nutt. All rights reserved. * Author: Gregory Nutt * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * 3. Neither the name NuttX nor the names of its contributors may be * used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************/ /**************************************************************************** * Included Files ****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include "nxlines.h" /**************************************************************************** * Pre-processor Definitions ****************************************************************************/ #ifdef CONFIG_NX_ANTIALIASING /* If anti-aliasing is enabled, then we must clear a slightly * larger region to prevent wierd edge effects. */ # define CLEAR_WIDTH (CONFIG_EXAMPLES_NXLINES_LINEWIDTH + 2) #else # define CLEAR_WIDTH CONFIG_EXAMPLES_NXLINES_LINEWIDTH #endif #ifndef MIN # define MIN(a,b) (a < b ? a : b) #endif /**************************************************************************** * Private Types ****************************************************************************/ /**************************************************************************** * Private Function Prototypes ****************************************************************************/ static void nxlines_redraw(NXWINDOW hwnd, FAR const struct nxgl_rect_s *rect, bool morem, FAR void *arg); static void nxlines_position(NXWINDOW hwnd, FAR const struct nxgl_size_s *size, FAR const struct nxgl_point_s *pos, FAR const struct nxgl_rect_s *bounds, FAR void *arg); #ifdef CONFIG_NX_XYINPUT static void nxlines_mousein(NXWINDOW hwnd, FAR const struct nxgl_point_s *pos, uint8_t buttons, FAR void *arg); #endif #ifdef CONFIG_NX_KBD static void nxlines_kbdin(NXWINDOW hwnd, uint8_t nch, FAR const uint8_t *ch, FAR void *arg); #endif /**************************************************************************** * Private Data ****************************************************************************/ /**************************************************************************** * Public Data ****************************************************************************/ /* Background window call table */ const struct nx_callback_s g_nxlinescb = { nxlines_redraw, /* redraw */ nxlines_position /* position */ #ifdef CONFIG_NX_XYINPUT , nxlines_mousein /* mousein */ #endif #ifdef CONFIG_NX_KBD , nxlines_kbdin /* my kbdin */ #endif }; /**************************************************************************** * Private Functions ****************************************************************************/ /**************************************************************************** * Name: nxlines_redraw ****************************************************************************/ static void nxlines_redraw(NXWINDOW hwnd, FAR const struct nxgl_rect_s *rect, bool more, FAR void *arg) { gvdbg("hwnd=%p rect={(%d,%d),(%d,%d)} more=%s\n", hwnd, rect->pt1.x, rect->pt1.y, rect->pt2.x, rect->pt2.y, more ? "true" : "false"); } /**************************************************************************** * Name: nxlines_position ****************************************************************************/ static void nxlines_position(NXWINDOW hwnd, FAR const struct nxgl_size_s *size, FAR const struct nxgl_point_s *pos, FAR const struct nxgl_rect_s *bounds, FAR void *arg) { /* Report the position */ gvdbg("hwnd=%p size=(%d,%d) pos=(%d,%d) bounds={(%d,%d),(%d,%d)}\n", hwnd, size->w, size->h, pos->x, pos->y, bounds->pt1.x, bounds->pt1.y, bounds->pt2.x, bounds->pt2.y); /* Have we picked off the window bounds yet? */ if (!g_nxlines.havepos) { /* Save the background window handle */ g_nxlines.hbkgd = hwnd; /* Save the window limits */ g_nxlines.xres = bounds->pt2.x + 1; g_nxlines.yres = bounds->pt2.y + 1; g_nxlines.havepos = true; sem_post(&g_nxlines.sem); gvdbg("Have xres=%d yres=%d\n", g_nxlines.xres, g_nxlines.yres); } } /**************************************************************************** * Name: nxlines_mousein ****************************************************************************/ #ifdef CONFIG_NX_XYINPUT static void nxlines_mousein(NXWINDOW hwnd, FAR const struct nxgl_point_s *pos, uint8_t buttons, FAR void *arg) { printf("nxlines_mousein: hwnd=%p pos=(%d,%d) button=%02x\n", hwnd, pos->x, pos->y, buttons); } #endif /**************************************************************************** * Name: nxlines_kbdin ****************************************************************************/ #ifdef CONFIG_NX_KBD static void nxlines_kbdin(NXWINDOW hwnd, uint8_t nch, FAR const uint8_t *ch, FAR void *arg) { gvdbg("hwnd=%p nch=%d\n", hwnd, nch); /* In this example, there is no keyboard so a keyboard event is not * expected. */ printf("nxlines_kbdin: Unexpected keyboard callback\n"); } #endif /**************************************************************************** * Public Functions ****************************************************************************/ /**************************************************************************** * Name: nxlines_test * * Description: * Print "Hello, World!" in the center of the display. * ****************************************************************************/ void nxlines_test(NXWINDOW hwnd) { struct nxgl_point_s center; struct nxgl_vector_s vector; struct nxgl_vector_s previous; nxgl_mxpixel_t color[CONFIG_NX_NPLANES]; nxgl_coord_t maxradius; nxgl_coord_t radius; nxgl_coord_t halfx; nxgl_coord_t halfy; b16_t angle; b16_t sinangle; b16_t cosangle; int ret; /* Get the maximum radius and center of the circle */ maxradius = MIN(g_nxlines.yres, g_nxlines.xres) >> 1; center.x = g_nxlines.xres >> 1; center.y = g_nxlines.yres >> 1; /* Draw a circular background */ radius = maxradius - ((CONFIG_EXAMPLES_NXLINES_BORDERWIDTH+1)/2); color[0] = CONFIG_EXAMPLES_NXLINES_CIRCLECOLOR; ret = nx_fillcircle((NXWINDOW)hwnd, ¢er, radius, color); if (ret < 0) { printf("nxlines_test: nx_fillcircle failed: %d\n", ret); } /* Draw the circular border */ color[0] = CONFIG_EXAMPLES_NXLINES_BORDERCOLOR; ret = nx_drawcircle((NXWINDOW)hwnd, ¢er, radius, CONFIG_EXAMPLES_NXLINES_BORDERWIDTH, color); if (ret < 0) { printf("nxlines_test: nx_fillcircle failed: %d\n", ret); } /* Back off the radius to account for the thickness of border line * and with a big fudge factor that will (hopefully) prevent the corners * of the lines from overwriting the border. This is overly complicated * here because we don't assume anything about the screen resolution or * the borderwidth or the line thickness (and there are certainly some * smarter ways to do this). */ if (maxradius > (CONFIG_EXAMPLES_NXLINES_BORDERWIDTH + 80)) { radius = maxradius - (CONFIG_EXAMPLES_NXLINES_BORDERWIDTH + 40); } else if (maxradius > (CONFIG_EXAMPLES_NXLINES_BORDERWIDTH + 60)) { radius = maxradius - (CONFIG_EXAMPLES_NXLINES_BORDERWIDTH + 30); } else if (maxradius > (CONFIG_EXAMPLES_NXLINES_BORDERWIDTH + 40)) { radius = maxradius - (CONFIG_EXAMPLES_NXLINES_BORDERWIDTH + 20); } else if (maxradius > (CONFIG_EXAMPLES_NXLINES_BORDERWIDTH + 20)) { radius = maxradius - (CONFIG_EXAMPLES_NXLINES_BORDERWIDTH + 10); } else { radius = maxradius - CONFIG_EXAMPLES_NXLINES_BORDERWIDTH; } /* The loop, showing the line in various orientations */ angle = 0; previous.pt1.x = center.x; previous.pt1.y = center.y; previous.pt2.x = center.x; previous.pt2.y = center.y; for (;;) { /* Determine the position of the line on this pass */ sinangle = b16sin(angle); halfx = b16toi(b16muli(sinangle, radius)); cosangle = b16cos(angle); halfy = b16toi(b16muli(cosangle, radius)); vector.pt1.x = center.x + halfx; vector.pt1.y = center.y + halfy; vector.pt2.x = center.x - halfx; vector.pt2.y = center.y - halfy; printf("Angle: %08x vector: (%d,%d)->(%d,%d)\n", angle, vector.pt1.x, vector.pt1.y, vector.pt2.x, vector.pt2.y); /* Clear the previous line by overwriting it with the circle color */ color[0] = CONFIG_EXAMPLES_NXLINES_CIRCLECOLOR; ret = nx_drawline((NXWINDOW)hwnd, &previous, CLEAR_WIDTH, color, NX_LINECAP_NONE); if (ret < 0) { printf("nxlines_test: nx_drawline failed clearing: %d\n", ret); } /* Draw the new line */ color[0] = CONFIG_EXAMPLES_NXLINES_LINECOLOR; ret = nx_drawline((NXWINDOW)hwnd, &vector, CONFIG_EXAMPLES_NXLINES_LINEWIDTH, color, NX_LINECAP_NONE); if (ret < 0) { printf("nxlines_test: nx_drawline failed clearing: %d\n", ret); } #ifdef CONFIG_NX_ANTIALIASING /* If anti-aliasing is enabled, then we must clear a slightly * larger region to prevent wierd edge effects. */ halfx = b16toi(b16muli(sinangle, radius + 1)); halfy = b16toi(b16muli(cosangle, radius + 1)); previous.pt1.x = center.x + halfx; previous.pt1.y = center.y + halfy; previous.pt2.x = center.x - halfx; previous.pt2.y = center.y - halfy; #else memcpy(&previous, &vector, sizeof(struct nxgl_vector_s)); #endif /* Set up for the next time through the loop then sleep for a bit. */ angle += b16PI / 16; /* 32 angular positions in full circle */ /* Check if we have gone all the way around */ if (angle > (31 * (2 * b16PI) / 32)) { #ifdef CONFIG_NSH_BUILTIN_APPS /* If this example was built as an NSH add-on, then exit after we * have gone all the way around once. */ return; #else /* Wrap back to zero and continue with the test */ angle = 0; #endif } usleep(500*1000); } }